T61 usb3?

Similar Questions

• Estimated value of T61?

  Have a friend who works in an office that has a few T61 he's trying to sell, and asked if I wanted a. Could someone give me an idea of the value?

  Its 14 "widescreen display 1440 x 900 (not), it has 3 GB of ram DDR2, disk hard 100gig, NVS140 graphics and dvd burner. The processor is the T7500.

  Unfortunately, he also has an inplace of card reader chip of the ExpressCard location that sucks really as I want to get a couple of USB3.0 ports on the thing.

  The OWL thing is most of them were fed only on updates to to keep on hand should one of the normal use those get out of service... While he claims that they are in perfect condition with minimal wear of battery.

  You guys think, would make a fair offer?

  Thank you.

  If the machine is older than the 08/08, meaning August 2008 (08/07 would be July of the same year) he is regarded as having a 'potentially dangerous' GPU and isn't worth much, probably less than $100.

  Ah. I just spoke with him and he said he had 08/07 on the serial number. He also said he thought he was worth $ 250... Frankly, I wouldn't have a number paying that if she did not have a faulty gpu (I'm in Canada, where things are a little more expensive than in the United States), but if he could up-and-die on me... well, I think I'll pass. I'm sure that nvidia did a recall on this point, if it was really bad, but the realism in me tells me try to request coverage for her that the end of the game would be considered ridiculous. (Just to be clear, I wouldn't ask for it after that I bought it... I would get the friend through his work, as they were original buyers and probably somewhere revenues)

• USB3

  What year the first USB3 was introduced for the MBP?

  2012. the non-retine and retina MacBook Pro introduced this year have it there.

  (143015)

• Problem of interaction port USB3 Mini Mac

  Mac Mini 2012. Wireless mouse connected to USB 4 port. If I plug a USB3 HDD (in a station host USb3 or enclosure) in port 3, next to the mouse, wireless mouse freezes.  If I replace a wired mouse on the same port, its OK. If I move the mouse wireless ports USB 1 or 2, its OK.   The HD USB dock that I use are self powered so it's not a current max USB issue.

  Same scenario if I try ports 1 and 2. It looks like the 4 ports are not independent, 1/2, 3/4 are shared. But I don't understand why it does not work in all cases.

  If you have a powered usb hub, you can test the thesis that it is current that seems somewhat likely

• MB 12 "retina: disconnects with a disc random external usb3.1typeC" sandisk 900 extreme 960GB.

  Hello

  I recently bought an external drive of 960GB "sandisk extreme 900" with connection usb3.1typC. the drive has no other ports.

  It is directly connected to my macbook 12 "retina with the port of usb3.1typeC, and I lived at random disconnects, without physically moving the macbook or the external drive. disconnects occur only when a copy is going, I copy 100 or 200 GB.

  the plug is correctly connected and does nor appear in the finder or in the application of harddisctool apple - after disconnecting.

  When I reboot 3 times, it pops up with the error "drive my being damaged, you can read but not write, format this drive."

  When I test the drive on my imac 27 ", I did not discconnects. but then I use another cable: "usb3.1typeC to usb3.0.

  -is this model "sandisk extreme 900" compatible with the MB 12 "retina?

  -is there enough power by the mb 12 "retina? for example when he is left of 30% of its power, I unplug the cable and then plug the external sandisk in the Mo - I wonder if the external drive can get enough power?

  Thank you!

  selfanswering:

  SanDisk lists this product '900 extreme' it is tested, verified and compatible with the retina 12 '' macbook from apple on their Web site.

  "disconnect it as happen only when I copy files, I think that its not getting enough power to the mb12", first of all, what power is low (10%).

  I can't use the power cord of the mb12"because there is only one port.

  "the only thing that is strange: when the power of the mb12" is low (10%) and the external drive is to copy the files, it should not disconnect the drive.

  the display of the power of 10% should quickly fall to 0.

• Stroke of lightning or USB3.0 external Firewire Mac?

  My 2011 MBP works still strong, but the FW and USB 2.0 are not keeping up with the external storage options: I can't see any external SSD FW option for backups of 1 TB, and my needs backup are currently between 2 and 3 TB.

  Googling suggests no conversion option (aside from a separate computer with FW and USB3.0 ports) for connecting USB3.0 external to the FW port; and the last post, I've seen questions about external lightning to the FW port on the computer (here, from 2013) has confirmed that the Apple adapter is an external FW way to the Thunderbolt Mac port.

  Another option again I missed connections more quick-as-USB 2.0 for a > 1 TB to a FireWire mac external SSD drive?

  I guess you can always make your own. MacSales.com has some good ideas... I've seen some with Firewire and USB 3.0, but not much with Thunderbolt, Firewire and USB 3.0.  I don't think that you can really connect 3 USB firewire, but I could be wrong, and I do not think that there is a USB 3 map, you could add to your MacBook Pro 2011. You could try a dock any. I'm sure that your MacBook Pro is not built in thunderbolt.

  John B

• EliteBook 840 G2: USB3.0 driver for Elitebook 840 G2

  Hello

  I use Elitebook 840 cell G2 and Setup driver USB3.0 (file: SP69862). However, the software poped error message (the Installer failed to install one or more device drivers) at the end of the installation. You can reference attach the file Setup log in link here.

  Please help me solve this problem. Thank you!

  Hello:

  See if the driver directly from Intel works...

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• Airport Time Capsule 3 to port usb2 and usb3

  Is the usb to Time Capsule on the new Time Capsule 3 to port a port USB2 and USB3?

  A USB 2.0 port.

  (141391)

• Stor.e Basics 1 TB USB3.0 & 2.0 transfer speed slow drive HARD Portable on Windows7

  Hello, I recently bought a couple of these bases Stor.e 1 TB USB3.0 & 2.0 HDD Portable of pcworld, bought 2 drives good previous experience, but now I think that because this is a new batch of discs (made in June 2012, instead of dec 2011 my last work entirely without problem stor.e Basics portable HARD drive) I now have the problem of slow start & stop/pause when the transfer of large files medium size 2GBs to 5GBs each (or more) of my Windows 7 laptop to laptop HARD drive using the USB 2.0 standard.

  the previous player without problem (made in Dec 2011), when the file transfer starts the application used to start at about 40 MB/s then falls to about 30 MB/s and stabilize all about this speed, these lots of June 2012 starts slot 20MB / s and falls below 5 MB / s.

  but that is not the big problem, the big problem is now transfer is in pause/stop and departure, transfer of a few seconds, then stopped for 10-20 seconds and agains starts, then stops / pauses, so used to take the couple minutes portable portable HARD drive transfer a file of 4 GB, but now takes ages (7-8 minutes or more) because of the slow speed and stop/pause & start the problem.

  I haven't changed anything on my laptop Windows7 and other drives of 1 TB per other manufacturers/brands are fine, so that means Toshiba must have changed some hardware or software/firmware of the player, lastest new problems, new batch, batch previous everything was fine.

  At first I thought it was just 1 player that could be the problem, but now readers have tested and both have the same problem. Oddly enough if the disc seems to be ok/normal when I transfer on my Vista laptop, which is usually always slower when trasnfering over the laptop Windows 7, Vista typically files transfers to nearly 20 MB/s while Windows 7 to about 30 MB/s. But now the two Toshiba drives during the transfer on the Windows 7 laptop, slower starts (compared to the Dec2011 lot), and then descends slot 5 Mbps, then stops / pauses, then starts the process repeated several times, and then finally completed the transfer.

  Also 'time remaining' bit in "file transfer popup", told me how much minutes & seconds to transfer, almost immediately (usually less than 5 seconds) when I start the transfer, but now if I transfer a big'ish of the file for example 2 GB + 'time remaining' says 'Calculation' for a while (10to20 seconds or more), then finally tells me the time remaining. So everything is just much slower compared to before.

  Anyone know what is the cause of problems in promoting news readers? necessary updates?
  Thank you
  Dave

  > anyone know what is the cause of problems in promoting news readers? necessary updates? Thank you

  Not sure if I can help, but have you tried to format the external DRIVE to NTFS drive?
  Try to do this.

  But generally the start & stop/pause should not appear when transferring large files so possibly it could be a HARD drive problem. Its odd that this happens with both hard drives, but a HARD disk problem could also be possible.

• Z420 HP: HP Z420 USB3.0 header pinout?

  Hello

  I moved my workstation to another case (Fractal Design R4) mainbaord z420 and continue to operate in the screen which warns me of different panels are not connected.

  So far, I was able to resolve problems with: Front Panel Audio, USB 2.0 and IEEE 1394 due Searchin' through the HP Forums and determine what pins must be connected to the earth so that the motherboard for the test.
  
  A question that I can't seem to understand / make disappear is "939-Front Panel Usb 3.0 not connected."
  
  I connected the cable USB3.0 of the case and it still shows this issue - by reading the forums I stumbled on this z420/z620 have a USB3.0 redriver .
  Should I have the original bench to pretend that usb3.0 is connected to the Commission? Is there another way to turn the motherboard usb3.0 is connected (similar to pins detect with audio and USB 2.0)?
  
  Given that the pc will run 24/7 as small file server, I don't really need before usb3.0 - I had rather have it starts normally after a power failure and need not be physical present to press f1 for it to start
  
  Any help on how to solve this problem is highly appreciated

  pj_1 wrote:

  Is there another way to turn the motherboard usb3.0 is connected (similar to pins detect with audio and USB 2.0)?

  Here is the pinout of the connector USB front P29.  This is a blue connector keeled, with needles of 2 mm spacing.  The pins are very thin, much thinner than the other internal USB header pins.  Pin 20 is a key, that is, the PIN is missing.  This allows to understand the direction of the connector and pin codes.

  

  Pin 10 is detect the front USB 3.0 cable.  The cable IO before this PIN, so that the system knows that the cable is installed.

  If the 10 pin is connected to the mass, which means that it is the rider to pin 4, 7, 13, or 16, the system will think the cable is installed and it will not be a POST error during startup.  The pins are very thin and fragile, so it may need a rare jumper to do so.

  This work around is not recommended or supported, as it suggests the system cable is installed, and of course before USB 3.0 ports will not work.  As an employee of HP, I must say this.    ;-)

• Box USB3 or SSD Thunderbolt

  Hello world

  Who need a few comments:

  I intend to connect an external hard drive to my iMac

  I think so

  Crucial MX200 1 TB SATA 6 Gbit/s 2.5 "SSD internal flash drive

  http://EU.crucial.com/EUR/en/ct1000mx200ssd1#productDetails

  and

  Inateck case 2.5 inch USB 3.0 drive hard drive external HARD drive

  http://www.Amazon.co.UK/tool-free-Inateck-external-enclosure-optimized/DP/B00OB2 R2LS/ref = sr_1_2? s = computers & ie = UTF8 & qid = 1459435523 & sr = 1-2 & keywords = inateck

  A friend commented that I could think of a (very expensive) thunderbolt box?

  Ideas please

  Stroke of lightning, or USB3 pregnant.

  If lightning, which?

  Many thanks and best wishes

  Jim

  That you intend to use for? Without this information any fundamental recommendation is difficult at best.

• Stor.e USB3.0 external base freezes Portege Z930 during the copy of data

  Dear users,

  It's time I have this problem: I bought the Toshiba Stor.e basic USB3.0 external HD, but I was always unable to use it at full speed.

  During copying of large files (hundreds of MB) the progress bar stops abruptly and the system becomes unstable: I can't stop the copy, or cancelled, or closing the window. I have to physically disconnect the HD so that return system and the file is never copied.

  I followed [this post | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69634&tstart=0] and installed the drivers intel updated (version 1.0.7.248), but I still feel the same question.

  Anyone have a similar problem and know any solution?

  Thank you very much

  da

  Hello

  To me, it looks like a HARD drive problem and not a question of system.
  It looks like interruptions in stream in the copying process and the system hangs.

  Have you tested if you get the same problems using another HARD drive?

• Portege Z930 - USB3.0 works as USB 2.0 after installing Win 7

  Hello world

  After uninstalling Win8 and installation of Win 7 (all the downloaded drivers on this site) USB3.0 work as USB2.0 (speed).

  And I see 1 unknown device in device like USB controller Manager.
  Install the driver a few times but without result.

  What this may be?

  Hello

  Have you installed the USB 3.0 driver that is on the page of the Toshiba UE driver?
  Do this!

  This driver provides support USB3.0 to your system

• Disabled superspeed USB3.0

  Product name: HP Pavilion 15 laptop

  Product number: E2U06EA #ABU

  I am unable to get one of the two USB3.0 ports for superspeed USB3.0 mode. Device Manager lists the controller xHCI ok with no obvious problems.  Check the regulator with USBVIEW Microsoft tool that it shows the controller as with 4 ports, ports 1 and 2 are identified as able superspeed and ports 3 and 4 are not. Connect a USB3.0 device in the laptop they appear on port 3 or 4 causes

  

  as you can see from the screenshot above do not support ports 3 and 4 USB3.0, how can I get the correct active?

  problem solved...

  I uninstalled the USB AMD (instructions at http://www.smartdongle.com/remove-amd-usb-filter-driver-ati-catalyst-install-manager/ ) filter driver, rebooted and now everything seems to work properly and now plug in a device is connected to port 1 or 2 at the rate superspeed.

  Hope this helps someone else with similar problems on windows 8.1

• CD device virtual disk external DRIVE on a Toshiba Stor.e Alu 2s (USB3.0)?

  Every time when I connect my new external 1 to (2.5 ') USB3.0 HDD of my PC, there is automatically a virtual cd drive.

  It only contains the manual and a link to the 'revolutionary' Toshiba market and there is no way to remove it permanently.
  The whole score is 6 MB in size, and in my opinion totally useless (there is no available encryption).

  Toshiba is not able to update their software "Toshiba drive Converter" when they release new material to give to users who want a simple portable drive without any publicity, a chance to get what they paid for?

  > The whole score is 6 MB in size and in my opinion totally useless (there is no available encryption).
  The partition any HARD drive could be easily deleted.

  -You must right click on the desktop icon and select Manage
  -Now in the management of the computer window click to enlarge: the computer management (Local) \Storage\Disk management that you can find in the left pane
  -Now right click on the partition or volume you want to delete and select "Remove the Volume" in the center pane. Note! You must choose the partition of 6 MB on the external HARD drive that you connected to the laptop!
  -The partition will be deleted.

  ;)