HP nc6400 Business Notebook: adding RAM nc6400 and part numbers

Similar Questions

• Applicable for a nc6400 spare parts a dv6z-110 or a dv4?

  I have a hp nc6400, and I love it - it my computer to school every day. I have two computers dead - a HP dv6z-1100 and a dv4. Are there parts I can take of these laptop computers and put in my nc6400 by chance?

  Hello:

  Since the dv6, you can use the HARD disk and the memory too long each module is not more than 2 GB.

  Since the dv4, Idem Idem.

  Each machine processors are not compatible.

  Indeed, the nc6400 is a nice model.  I had a time, he sold and upgraded to the 6930p.

  Work the nc6400 Windows 7 pretty well too, and you can run a 64 bit on it OS if you have processor T5600 or higher installed.

  I wouldn't run a 64 bit OS without having the max 4 GB of installed ram.

  Paul

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• HP Pavilion Notebook - M1Y45UA: Ram upgrade

  Hello!

  I have a HP Pavilion Notebook - M1Y45UA.

  I was wondering if my Pavilion supports an upgrade to 16 GB of RAM? And if so, where can I find the best information on the replacement/upgrade the RAM for my particular laptop? Preferably in the form of video.

  Hello

  Yes, it supports 16 GB

  DDR3 - 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1333)

  DDR3L-1600-MHz single channel

  Support supports up to 16 GB of RAM in the following conƭgurations

  ● 16384 MB total system memory (8192 × 2)

  ● total system 12288 MB memory (8192 × 1) + (4096 × 1)

  ● System total of 8192 MB memory (8192 × 1.) or (4096 x 2)

  ● total system 6144 MB memory (4096 x 1) + (2 048 × 1)

  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)

  Product page 2 manuals

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/hardware/message-ID/325316

  How to replace page 43

• LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

  Hello

  After adding RAM 48 MB on my HP2300DN, on the control panel appear 'uninitialized disk '.  I tried to do a cold reset and replace DIMM Slot2 and Slot3, but without success.  Any help would be really appreciated.

  Specifications:

  Printer: HP LaserJet 2300DN

  1 DIMM Slot:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  DIMM location 2:

  Side 1: 1 MB of ROM memory

  Side 2: empty

  DIMM location 3:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  EIO 1: HP JetDirect J4169A

  RAM DISK storage: 45Mo

  FLASH storage capacity: 3 MB capacity

  Total memory 96 MB

  Hard drive: No.

  Model number: Q2475A

  Dmitry

  You probably confuse the printer. You seem to be using 2 DIMMS that are 48Mo and each also 8 mb flash. These chips contain the firmware in the flash section and the memory in the other. Since you're probably using a chip LJ2300 another dimm, you confuse the printer with 2 firmwares. You must use a barrette of memory 32, 64 or 128 in the 3rd slot. Only 1 chip 8/48 MB can be used in this printer.

• Flickering screen 17 Alienware r3 after adding ram

  I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

  I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

  Any help is appreciated!

  Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

• Inspiron 530 - adding RAM

  Hello

  I want to buy a memory to my inspiron 530! Here > http://accessories.euro.dell.com/sna/category.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&category_id=4325&mfgpid=1226170&chassisid=-1<- the="" 1="" gb="" module="" (28="">

  I read on documentation (http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857) when I install memory I need to remove the PCI Express x 16 card... I don't understand. I thought adding ram was simple and all you had to do is open the case, insert the ram and secure them correctly and then close the case. Start the pc and it's done.

  I know that my inspiron 530 can have only 4 GB of ram. I have 2 GB of ram for now.

  Is there something I need to know? Is there something different?

  Dell is not offering Win7 drivers for this model. I suggest you go here and read some of the links on the upgrade to Windows 7. Run the Win 7 Upgrade Advisor first to see what it says on your system.

  Without knowing what equipment you have (for example, video card, sound card, network adapter, etc.), it is impossible for anyone to tell you exactly what drivers you need. In some cases, but not all cases, Vista 64-bit drivers can work. The Vista 64 drivers are here. (Confirms that he says again Vista 64-bit upstairs when you load the page!) And if you use your Service tag (do not post here!) you can find a list of drivers installed Dell, so at least you will know what hardware you have, but keep in mind these drivers for Vista 32 bit.

  You can also go here for links to the hardware and instructions to install Win 7. And you can search these forums for discussions on installing Win 7 on the Inspiron 530 to see which other users may have met problems.

  Ron

• Laptop HP 15-r030wm: I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about how Tablet but idk how t

  I have a HP 15-r030wm Notebook PC (ENERGY STAR) and he said something about fashion Tablet but idk how to remove the keyboard. I have a Tablet one mode I tried but it work I would like to touch or use a pen?

  HP 15-r030wm Notebook PC (ENERGY STAR)

  Your laptop lacks a touch screen. Simply turn the Tablet mode is not capable if the material is not there.

• I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  I have a model end of 2013 13 MacBook Pro with 4 GB or RAM retina and think to upgrade to El Capitan. Is this enough RAM

  Of course you can upgrade to El Capitan. But I think better if you can change the internal hard drive (SATA drive) in the SSD drive. You will get better results, faster than still, you only have 4 GB. This is mine... MacBook pro in early 2011.

  

• Adding RAM to the Portege Z10T-A WT310

  Hello

  my device has 4 GB of RAM and I want more.
  Does anyone know the max ram, this unit can hold?
  How to add RAM (I have good knowledge of PC component but have never popped the hood on a shelf)?

  Hello

  To my knowledge, that the RAM upgrade is not possible because of the WT310 has been configured with 2 GB or 4 GB of memory onboard.
  If this memory is welded and part of the system board.

  Welcome them

• HP Pavilion 15-ab150sa: HP Notebook System BIOS update (and processors)

  Hi, I bought the HP Pavilion 15-ab150sa last weekend and have had many problems since getting it. Kept freezing and condensation WiFi shortly after logging in.

  I found there were 6 updates that need running that are not automatically showing until I scanned for them in HPSA.

  Its took me 4 days to get the updates for the most part actually fill and it seems to work a lot better now, however, I have an update for HP Notebook System NIOS update (AND processor) keeps a failure...

  Any ideas?

  Please keep it simple, I'm not very good with technical information. :-)

  Greg

  Hi Greg,.

  Try the following.

  If the update of the bios still work in HPSA, click the Stop button.

  Close HPSA, restart the computer, and then download the update of the Bios from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75199.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Note:  If the update option arises as being 'blocked on this device', you will need to contact HP in this regard.

  Kind regards

  DP - K

• Toshiba ACPI device driver based on added value logical and general purpose

  Had to rebuild my Satelite A40 from the recovery CD and I get a message asking me to install a TOSHIBA ACPI-Based added value logical and objective general Device Driver. He can not find a file called tvalz.sys and I can't find a download appropriate on this site... can someone advise. Thank you James

  Hmmm I think that ACPI-Based added value logical and objective general Device Driver belongs to the Toshiba common Modules.

  This utility of common Modules can be found on the European driver Toshiba page.
  Download and just install it again.

  But I wonder why you should install it after using the Toshiba Recovery CD?  :|
  The restore CD contains all the necessary drivers, so I think that this common modules must be installed. But who knows

  Try my advice and install the common Modules as shown above

  Good luck

• RAM upgrade and Satellite A200 - 19K graphic card memory:

  Hi all

  The Satellite A200 - 19K came with 1024 MB memory system. It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop? I would like to add another a 1024 MB of RAM, is that the slot more be available?

  The second question is on the graphics card from NVIDIA. The product specification mentions the graphics adapter as below...

  Manufacturer: NVIDIAî
  type: NVIDIAî Geforcea? ¢ GB 7300 supporting Turbocachea? ¢ technology
  memory: 64 MB dedicated VRAM (up to 335 MB of total available graphics memory using Turbocachea? ¢ technology with 2 GB of system memory)
  memory type: DDR video RAM (resp. video RAM DDR and DDR system memory combined)
  connected bus: PCI Express 16 x

  My question is, after upgrade from 1024 MB to 2048 MB system memory, is that the card NVIDIA GeForce will be automatic upgrade from 64 MB to 256 MB for graphics memory?

  TAHNKS A LOT!

  Hello
  >, It's only 2 cards of memory of 512 MB or just 1 memory card 1024Mo in the system of the laptop
  I think that the laptop came with a module of memory 1 GB and the second Bank should be free.

  Now something about the graphics card.
  Well, the graphics card GeForce Go 7300 supports own graphics memory 256 MB (no shared memory!)
  But it also allows a dedicated memory.
  This amount of memory is variable and depends on the available main memory.

  I think that everything runs automatically and you will not need to change the settings to assign this memory dedicated after main memory upgrade

• Can I switch to 16 GB of RAM? and what RAM should I expect?

  I have a Lenovo IdeaPad Z400 cell phone has 2 RAM slots and I have 4 GB of RAM in each of them (ELPIDA J2108BDBG / product ID RMT3160ED58E9W1600) for a total of 8 GB. I wanted to upgrade to 16 GB. Take the laptop by inserting the 8 pieces of GB of RAM in each slot? Is there something specific, that I need to pay attention to? I was watching it > http://www.corsair.com/en/corsair-memory-16gb-2-x-8gb-ddr3-sodimm-memory-cmso16gx3m2a1333c9

  Iamos wrote:
  I have a Lenovo IdeaPad Z400 cell phone has 2 RAM slots and I have 4 GB of RAM in each of them (ELPIDA J2108BDBG / product ID RMT3160ED58E9W1600) for a total of 8 GB. I wanted to upgrade to 16 GB. Take the laptop by inserting the 8 pieces of GB of RAM in each slot? Is there something specific, that I need to pay attention to? I was watching it > http://www.corsair.com/en/corsair-memory-16gb-2-x-8gb-ddr3-sodimm-memory-cmso16gx3m2a1333c9

  Refer to the solution in this link.

• I have a business (with 10 cases) structure and I want 2 of them to be included in a loop.

  Hi all

  I'm new to this forum and I have a question.

  I have a business (with 10 cases) structure and I want 2 of them to include in a loop.
  How can it be done?

  Thank you.

  mosheg.

  Use own State Machine, where you can select the case according to your needs