TABLE and VAR
I'm having a problem with VAR and TABLE functions. Can't seem to get the correct syntax, but followed Ser60.
* TABLE arrayVariableName%{dimname/} = {constList}; *
* VAR variableName [= value | http://forums.oracle.com/forums/]; *
Error: 1200324 error in formula for compiling monthly *(Line 87): operator expected after * TABLE
If anyone has some work I'd apreciate it.
Also var can you use and string or is onlt digital vkaues?
Thank you
Tables and Vars contain digital values, not the values of string. They must also be used in a block as a statement
VAR VarTest;
(
varTest = sales;
Newsales = vartest;
)
Tags: Business Intelligence
Similar Questions
-
How can I read items in four tables and store them in variables?
Greetings,
I have 4 tables which I read to control an autonomous robot vehicle as instructions.
I must be able to read the first elements of each table and store in separate variables 4 (direction, speed, angle, distance). Wait until the first statement has been executed. Then I move on to the second elements of each array. I'll repeat this until I went through all the elements. I am struggling to figure out how to do this?
Please note:
-The number of items in the tables is always the same, although the number of items varies as can be less instructions or more.
For example, a full trial takes 1st element of table 1, table 2, table 3 and table 4 and it builds something like: forward, 10, 20, to the left. This will then be the robot moving forward at a speed of 10 over a distance of 20 and then turn left. Once this done then it contains the elements 2 and so on.
Please find attached my VI that reads a text file and creates 4 berries.
Thank you.
stanm13 wrote: Unfortunately, I don't think you understood my question.
Then, I would say a) you don't understand the answer or b) you explain well enough.
To make each element of an array, using a loop FOR with autoindexing entered is the way to go.
-
The tables and then splitting wrapping them (liquid)
Just a simple question on here, is there away from separate data from the table for a web application? A perfect example would be when you create a check box form field. When the output data, it's just a unique string that looks like this "Ryan, Ashley, Melissa. Would be, I would like to do is to separate the data and then wrap with a < li >.
I created the JQuery version of what works, but I'd like to see if it is far to do with liquid, as I'm new to the platform.
{$('.padt20') .find ('ul') .each (function ()}
var $this = $(this);
Var words = $this.text () .split (",");
var text = words.join ("< /li > < li > < class i ="fa fa-review"style =" margin-right: 10px; color: #F26228;) "" > < / i > ");"
$this.html ("< li >" + "< i class ="fa fa-review"style =" margin-right: 10px; color: #F26228;) "" > < / i > "+ text +"< /li >");"
});
<ul>{{ArrayTag}}</ul>
HI Ryan
If we call to the output string "formdata", then all you have to do is
{{formdata | divided: ","}}
to get a table and then just loop through it:
{% assign array formdata = | split: ',' %}}
{% for me in table-%}
- {{ i }}
-
data in multiple tables and columns
Hello
How to find if multiple tables are containing the same data?
Text of the 'Apple' is in three different tables and under three different column names.
Expected result fruits_one fruits_two fruits_three
Thank youSelect name, quantity from fruits_one; Apple 1 Orange 1 Pear 1 select flavour, desc from fruits_two; Red, Apple Blue, Berry select order,date,details from fruits_three; 101 11/11/2011 Grapes 102 12/01/2010 Apple
SandySQL> create table fruits_one (name varchar2(100), quantity number); Table created. SQL> insert into fruits_one 2 select 'Apple' name, 1 quantity from dual union all 3 select 'orange' name, 1 quantity from dual; 2 rows created. SQL> commit; Commit complete. SQL> create table fruits_two (flavour varchar2(100), des varchar2(100)); Table created. SQL> insert into fruits_two 2 select 'Red' flavour, 'Apple' des from dual union all 3 select 'blue' , 'berry' from dual ; 2 rows created. SQL> commit; Commit complete. SQL> set serveroutput on SQL> declare 2 l_search varchar2(10) := 'APPLE'; 3 l_cnt number := 0; 4 begin 5 6 for x in (select column_name, data_type, table_name from user_tab_cols where data_type in ('VAR CHAR2')) 7 loop 8 9 execute immediate 'select count(*) from "' || x.table_name ||'" where upper("' || x.column_n ame || '") like ''%' || l_search || '%''' into l_cnt; 10 11 if l_cnt > 0 then 12 dbms_output.put_line('table = "' || x.table_name ||'", column = "' || x.column_name ||'"'); 13 end if; 14 15 end loop; 16 17 end; 18 / table = "FRUITS_ONE", column = "NAME" table = "FRUITS_TWO", column = "DES" PL/SQL procedure successfully completed. SQL>
-
The most effective way to insert form data into multiple tables and w/autonum
Hi all, this is my first post here. I am new to APEX and PL/SQL. I have ColdFusion and SQL, and I'm used to perform CRUD operations in my CF Tags application files. From what I've read so far, so if this is accurate, it seems that it is more efficient to perform most of the CRUD operations on the database side, I hope that for advice on the best way to accomplish what I ask - even if I'm trying to do is better off in my new APEX application I am open to this information as well.
I have a form whose data must reside in two tables. Table A is a one-to-one relationship table and stores General information for each request. Table B is a table of one-to-many observations and should store unique records for each type of comment entered on the form, of which there are 3 comment fields on the form, I'd end up with 3 disks in table B for 1 in table A. I am generating an AutoNumber for table A with a sequence and relaxation. I want to do is take the AutoNumber I just created and use it for insertion in the Table B each insertion I have to do. This is where I am stuck.
I would like to comment on 1) where I should put all these operations and 2) how best to go about what I want to do coding. In ColdFusion, it is as simple as inserting the record in Table A, immediately asking to table A more recent recording and storing (auto) ID in a variable and then using this var for any other table insertions, I had to do. I know it must be at least a little easier in the Oracle world, I just need a nudge in the right direction. Thank you!OraclePledge,
You're pretty close to not having worked with oracle a lot.
This section is backwards:
insert into sch.tbl_main(cust_lname,cust_fname,acct_num) values(:P3_CUST_LNAME,:P3_CUST_FNAME,:P3_ACCT_NUM); select "SCH"."TBL_MAIN_SEQ".currval into v_ID from dual;
Even if it will work if you only have a single user, it's a potential bug with two or more users. First select the key (if it's first use nextval rather than currval) can use it in the insert statement.
See you soon,.
Janet TysonPublished by: Tyson Janet on June 23, 2011 10:48
-
Hi all
Greetings...
The script below works perfectly in indesign CS3 to apply table and cell style. But in indesign CS4 shows runtime error. Kindly help me on this...
var myTable = app.activeDocument.stories.everyItem().tables; for (var n=0; n < myTable.length; n++) { myTable[n].appliedTableStyle = "Table Style 1"; myTable[n].cells.everyItem().appliedCellStyle = app.activeDocument.cellStyles.item("[None]"); myTable[n].cells.everyItem().clearCellStyleOverrides (true); alert(myTable[n].rows.length); for (var a = 1; a < myTable[n].rows.length - 2; ++a) { myTable[n].rows[a].cells.everyItem().appliedCellStyle = "T body"; alert(a); } myTable[n].rows[0].cells.everyItem().appliedCellStyle = "T col hd";//First Row myTable[n].rows[-1].cells.everyItem().appliedCellStyle = "T body bot";//Last Row }
Thank you
Knockaert
Hi Karthik,
Please try the JS Code below and come back.
var myTable = app.activeDocument.stories.everyItem().tables; for (var n=0; n < myTable.length; n++){ //~ myTable[n].appliedTableStyle = "Table Style 1"; //~ myTable[n].cells.everyItem().appliedCellStyle = app.activeDocument.cellStyles.item("[None]"); //~ myTable[n].cells.everyItem().clearCellStyleOverrides (true); // Please check the table cell styles name is correct or not? var myActiveTable = myTable[n]; myActiveTable.rows.itemByRange(0,-2).cells.everyItem().appliedCellStyle = "TB"; myActiveTable.rows[0].cells.everyItem().appliedCellStyle = "TCH";//First Row myActiveTable.rows.itemByRange(-2,-1).cells.everyItem().appliedCellStyle = "TBB";//Last Row }
the output of code js above looks like this snapshot.
THX
csm_phil
-
I'm reading the data (speed rate and flow) of a table and it plot in a graph.
I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?
There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.
-
Hi all
Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.
I did program mentioned above but it does not work. Can you tell me what is the problem?
There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.
I have attached my program with this message.
Thank you in advance!
(1) FOR loops are your friend here. You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.
(2) I would only treat the numeric values of the characters. So go terminal of control of the chain, the capital letters and byte array to before the outer loop. You can use a size of Board over there to tell how many times the outer loop to iterate.
(3) the Index table is extensible. So you only need over the index of the first, and it will increment itself, as it develops.
(4) you need to finish the lookup table (table 3D)
-
Can I enter both a table and a constant of double precision in the VI form?
I would like to calculate a new 1 d array using the formula VI. LabVIEW 'smart enough' to enter a 1 d table and a double precision constant in the VI form and leave a 1 d table receives basic commands?
For example, can I enter [1 2 3] table and the constant [2] and say "table * constant-1" in the VI form and get an output of [1-3-5] or do I have to make a loop for or something?
The Express VI formula seems that it can have up to 8 inputs.
Twolfe, the best way to find an answer to this type of question is to try it.
I didn't know this (because I have no reason to use that express VI), but you can wire a table to it. He treats like any other LabVIEW operation on arrays.
But if you were to make a loop, then you should already be avoiding Express VI and start making actual emissions.
-
How to write a table and a scalar value in file?
I would like to write my data in a file but cannot address the problem. In the file I would write are values of x and y of my points of data in two columns, however, the data is in a table and the data of x consists of 3 pieces of information: an initial x, x incremented value and the number of points in my sample of data. How would I go about this?
The number of points is redundant, because it will be the same as the 'other' in the table.
Here's what I usually do:
-
issue with tables and clusters
Hello
Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.
Concerning
You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.
This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.
Have fun
Ben
-
Number of points and the number of plots for table and graph
Hi guys,.
Can someone explain to me why I get when I run the number Vi 1 2 plots for each table and graph with 6 points, but when I run vi 2 I get 4 locations with 1 point each run assuming that the same logic applies to two screws
Thank you.
When wiring of the paintings in the graphics, it is assumed that each line are several points of land.
You must convert the 2D table or right-click on the graphic and select "convert table.
-
analysis of the table and compare
Hello
I have a fixed table and would like to extract the .txt file that corresponds to the first component-data + / 5 x-data value compared to the entry level. The output file must contain the original table and the corresponding digitized value y - data.
I am stuck at the point indicated on the attachment VI and would get all the help that you can offer.
I'm using LabView 8.5
Thank you
hiNi
-
Search for the string in the string table and see the following value in the line
Hi, I'm new I have LV and I do a Vi that read worksheet values and generates 2d channels of the same spreadsheet table. For the moment everything I need is a function that find specyfic string in this table and show the next value in a line. As:
Table:
a; b
c; d
f; gexample: find the 'c '.
VI shoud show "d".
Concerning
Not a bad homework problem. Do it with pencil and paper. Write your table and pretend you're the computer. What you want to do (step by step)? What questions do you have?
Now that the translation a bit to computers. You mentioned that the data is in an array of strings. What structures (LabVIEW) work with tables? [Do you know how to work with tables? [Otherwise, review some of LabVIEW Tutorial material - see top right of the first page of the Forum]. What do you know about channels? What questions you need to ask questions on the channels? What do you know about string functions?
Watch these things in some LabVIEW code, 'feed' some data and see what he does. If it seems to do things "unexplained", you can try to look at the block diagram to run by turning the performance highlight (and if you don't know what that means, use the help of LabVIEW and see the tutorials).
Bob Schor
-
Problem of sorting of tables and... Using the functionality of the case
OK, so im do this bit of code that solves the linear equations of 3 x 3, I have most of the code actually lack just 2 small pieces for value of ascetics, garlic try to describe them as detailed as I can, no matter what type of advice or advice with any of them would be greatly appreciated
Some details of the program:
Equation MUST be entered in a string and not must (and probably should) be able to do some difficult fixing
It will be limited to the +'s and-'s signs
Problem 1.
I don't really know how to 'sort' my equation according to their variables, example:
User input: - 2 y + 1 * x z - 1 = 2
I can make it look like: - 2 y + z - 1 x 1 = 2
I want what it looks like: 1 x-2 y - 1 z = 2
I can handle sort the equation, IF I knew the order the user will add variables, the only thing that comes to mind is turning them into a table and make a case for each (x, y, z - x, z, y - etc.) and by using some kind of process of elimination to choose the table 'longer or shorter', I really haven't got much if this because it seems like a stupid idea , but it's the only thing it comes to my mind.
Problem 2.
So as im fixing the spaces between characters, at least, I find a '10', I don't want one "1 0", very roughly, I managed to work around this problem by using a "find and replace String", but I'm having trouble making a "case" for her, as in, I can't understand the entry of 'right' to a string of cases. " example:
User input: 1 x-2 y - 1 z = 12
The result inside the box is correct and resembles a '12', but as I don't know the correct entry, obviously my default case is empty, and it passes through, so the result on the outside is a '1 2 '.
Any link for someone who fixed a similar problem or guides would be great, I'd also like to announce that 3 weeks ago, I've not even knew what was "LabVIEW", if you can 'dumb down' a little explanation would be greatly appreciated.
You can try to use php code Analyzer to help analyze. The joint was a quickly hacked together solution that makes several assumptions (a big one being that the entry is correct and equal to is the last thing). This isn't really a complete solution.
Sorry I didn't have the time to comment on it. If it seems odd, I was using money orders that got lost, when I recorded it for the previous version.
{% endfor %}
You must create a first variable because it will not work if you try to split in the loop for
To bookmark this - the Developer Reference
It provides a pretty good overview of what is available in cash & a lot of other things besides. I use it all the time.
Maybe you are looking for
-
Changes in the incoming packets to address SG300 inter - VLAN routing and MAC
Hello I SG300-20 operates in Layer 3 mode Vlan1 is not used Gateway Internet is VLAN211 Customers are in other VLANs Switch is the default gateway for clients and itself has internet gateway as default route. The switch MAC address is XX:XX:XX:XX:XX:
-
MY BLACKBERRY CURVE 9380 blackBerry smartphones
Good day all My blackberry 9380 curve, asked me to restart and cela I did it, but after a while he began to show me a message saying JVM error 517 reset. I'm totally helpless because I removed my battery too and has replaced new but its always showin
-
Wireless TV connect stops by itself stop
I bought a HP ENVY 17 t-j100 Leap QE CTO Notebook PC Motion and Wireless TV Connect. The Wireless TV Connect does not work with my new laptop. However, it works perfectly with my old laptop, a DV7T-6100, so I know that the Wireless TV Connect is no
-
I guess I'm one of many, but I am disgusted with Adobe renewal policy.I signed up for 1 year of product at a price and got automatically renewed on February with a new higher price.1. I have received an email on my account in auto-renouvele2. it is i
-
error unexpected opening LR catalog
I received a notice stating that Windows 10 could not connect to (I forgot what he said). I took a point of restoring several days ago, and now I get the unexpected error message and there is only one catalog listed, which is the one that does not o