Table in the call back feature

Similar Questions

• OfficeJet J3680 all-in-one: the caller ID feature

  Hello

  My officejet does not seem to have the caller ID function as it should.

  Do I have to update - upgrade somehow?

  Thank you

  Hello

  It is difficult to say, but it is surely worth a try.

  Ensure that the correct area is selected under Setup > Prefrences > Set Language & country.

  If it is still not listed, the options may vary according to different countries and such is not supported by the printer in your area, usually the option should be available.

  Kind regards

  Shlomi

• issue of the call control feature

  I am running an application with an unidentified Developer (LuxRender), triggered by another application by a developer identified (mixer)

  Both applications are produced executable 'stand alone '.

  If I perform an action in a mixer called LuxRender there is no problem with the launcher application and do this is special, and in certain situations, I need this app run stand-alone.

  If I call LuxRender from the finder, it gives me an error that it is an unidentified developer. From the doorman ( > System Preferences > Security & private/General life) by clicking Open anyway I can't open the application, unless I drop my safety for the 'anywhere' level.

  The fact that I can get around this with another application, what is not somehow try to outsmart security is relative to me. The question I have is: is this behavior of design?

  

  

  GateKeeper settings apply only when you start an application from the Finder * first *.

  If an application does not start because it is not signed, then instead of double-click you can press the control key and choose open - then a similar message but instead of just an OK button, you will have two buttons, one that says "Open". Click on it to launch the application. After that you can start normally.

• table in the sql statement

  Hi all
  
  I just created a function that returns a TABLE;
  
  I am grateful if some body guide me how to display the values in the table at the call of my sqlplus as function
  
  Select * from func_avg_cost() of double;
  
  its fine when you return a single value of work. But I'm back a table to retrieve the value from the table in the sql statement
  
  Thank you!

  now, I must return two numbers function. as possible through table.

  which is also possible with a simple object:

  SQL> create or replace type my_number_typ as object (n1 number, n2 number)
  /
  Type created.
  
  SQL> create or replace function my_numbers (n1 number := 0, n2 number := 0)
     return my_number_typ
  as
  begin
     return my_number_typ (n1, n2);
  end my_numbers;
  /
  Function created.
  
  SQL> select   my_numbers (2, 3) from dual
  /
  MY_NUMBERS(2,3)
  --------------------------------------------------
  (2; 3)
  1 row selected.
  
  SQL> select   my_numbers (sal, deptno) my_numbers  from   emp where   empno = 7788
  /
  MY_NUMBERS
  --------------------------------------------------
  (3000; 20)
  1 row selected.
  
  SQL> select   my_numbers (sal, deptno).n1 sal, my_numbers (sal, deptno).n2 deptno
    from   emp where   empno = 7788
  /
         SAL     DEPTNO
  ---------- ----------
        3000         20
  1 row selected.
  

• qnx.callExtensionMethod call back

  Hi all

  Is there someone who successfully return call of QNXStageWebView.

  I tried for the most part any implement to get the call back but no luck.

  web_view = new QNXStageWebView() ;
              web_view.stage = sp.stage ;
              web_view.viewPort = new Rectangle(0 , 100 , 768 , 1180 ) ;
              web_view.enableJavaScript = true ;
              web_view.enablePlugins = true ;
              web_view.addEventListener(JavaScriptCallbackEvent.JAVA_SCRIPT_CALLBACK , onCallBack ) ;
              web_view.loadString("" +
                  "
  ") ;
  

  I wrote qnx.callExtensionMethod function closed, which I call you to help to run javascript.

  web_view.executeJavaScript('closed();') ;
  

  But I'm not able to retrieve the call on my call back caller.

  As I used it

  JavaScriptCallbackEvent.JAVA_SCRIPT_CALLBACK
  

  Thanks in advance

  Ahh ok, it seems that qnx javascript isn't loaden by injecting code. You must load from url.

  Try this concept:

  package
  {
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.events.Event;
      import flash.filesystem.File;
      import flash.geom.Rectangle;
  
      import qnx.events.JavaScriptCallbackEvent;
      import qnx.events.WebViewEvent;
      import qnx.media.QNXStageWebView;
  
      public class TestWeb extends Sprite
      {
          private var wk:QNXStageWebView;
          public function TestWeb()
          {
              super();
  
              // support autoOrients
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
  
              this.addEventListener(Event.ADDED_TO_STAGE, init);
          }
  
          protected function init(e:Event):void{
              wk=new QNXStageWebView("test");
              wk.stage=this.stage;
              wk.viewPort=new Rectangle(0, 0, stage.stageWidth, stage.stageHeight);
              wk.addEventListener(JavaScriptCallbackEvent.JAVA_SCRIPT_CALLBACK, callback);
              wk.addEventListener(WebViewEvent.DOCUMENT_LOADED, doLoaded);
              wk.loadURL("file://"+File.applicationDirectory.nativePath+"/index.html");
  
          }
          protected function doLoaded(e:WebViewEvent):void{
              wk.executeJavaScript("displayDate()") ;
          }
          protected function callback(e:JavaScriptCallbackEvent):void{
              trace("CALLBACK RECEIVED "+e.name);
          }
      }
  }
  

  And create your html on file src file:

• Questions about the reorganization of the rows in the table by drag-and - drop feature

  I am referring to the demo: 106. Drag-and-drop the reorganization of the rows of the table in aCorner of Code DF to implement my case.

  I am facing some problems:

  1. the view object (bound to the table) is read only and it is created directly by very complex SQL queries, without entity objects. When it is run the code: dragRow.removeAndRetain () in the method: DnDAction processDrop (DropEvent dropEvent), it throws the error so that a guest view object is read-only. I want to know if there is another way to delete the moved collection line?

   public DnDAction processDrop(DropEvent dropEvent) {
  ...       
         CollectionModel collectionModel = (CollectionModel) table.getValue();        
          JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
          
          //get access to the ADF iterator binding used by the table and the underlying RowSetIterator.
          //The RowSetIterator allows us to remove and re-instert the dragged row
          DCIteratorBinding departmentsIterator = treeBinding.getDCIteratorBinding();               
          RowSetIterator rsi = departmentsIterator.getRowSetIterator(); 
  
          int indexOfDropRow= rsi.getRangeIndexOf(dropRow);
         //get access to the oracle.jbo.Row instance represneting this table row
         Row dragRow = (ViewRowImpl)table.getRowData(draggedRowKey);
         //remove dragged row from collection so it can be added back
         dragRow.removeAndRetain();
         rsi.insertRowAtRangeIndex(indexOfDropRow, dragRow);
        ...
  }
  

  2. When you click on a button, I need to save the command results in the database using the command update # of each rank. Here it is the handler method for the event of the action (in MB) button.

  I want to use RowSetIterator table for encode it from all ranks and update the value # order of each rank.   I call a data control method to run sql update. is it ok? any suggestion?

      public void processSaveOrder(ActionEvent actionEvent) {
          CollectionModel collectionModel = (CollectionModel) mytable.getValue();        
          JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData();
          
          //get access to the ADF iterator binding used by the table and the underlying RowSetIterator.
          //The RowSetIterator allows us to remove and re-instert the dragged row
          DCIteratorBinding iterator = treeBinding.getDCIteratorBinding();               
          RowSetIterator rsi = iterator.getRowSetIterator();
          Row row =rsi.first();
          System.out.println(0+"="+ row);
          int i = 1;
          while(rsi.hasNext()){
              row = rsi.next();
              System.out.println(i+"="+ row.getKey());
              i++;
          }
  
      }
  

  A workaround solution was found:

  In ADF 12 c, it can be solved by changing Updatable "Always" in the details tab of each attributes to read-only view object without entity object.

• Update the table on the dialog flow back task...

  Hi all
  
  I have a table. In a context menu of the table, a user uses a menu command to launch a workflow task merely as inline popup dialog box, which allows them to alter certain data associated with the selected line. It all works very well.
  
  What I'm trying to understand, that's how I trigger a refresh of partial page on the table once the workflow returned and the dialog box closes. I tried to call a support as target bean method of the "listener after" for the call activity of workflow that call the stubborn workflow, which calls AdfFacesContext.getCurrentInstance () .addPartialTarget (table), but which did not cause a refresh of the table. I waited a bit that would be the case.
  
  So, what event can I link at the right time in order to update the table?
  
  Thank you

  Hello

  When you open a workflow bounded in a small popup, then you use the earpiece back on the component that runs the pop-up window to refresh the table. On http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html, see example #69

  Frank

• Another demi-cuite feature, Adobe? Table of the content problem.

  Hello

  I'm really starting to get stressed with the automatic text features in InDesign. Each auto text feature is implemented in a superficial way. Notes don't cover columns, references break books, crash the app or go in infinite loops, indexing is a mess.

  Now, my question is: how to avoid the following events? Look at it please, screenshot.

  

  As you can see InDesign takes jumps of line and base-travel of the headlines to the table of contents, even if the paragraph to the TOC styles define a zero baseline-shift (well, the breaks are characters). Is there a work around to stop what is happening? A way to tell InDesign to ignore break characters and, Yes, to keep the definition of table of contents styles?

  I would appreciate any advice. I sent a bug report, too. I hope that Adobe goes back to the roots and begins production stable, careful products once again. Since CS4 the mess of bug is a real pain. Less marketing and editions and better quality, please!

  Andreball wrote:

  In my case, however, I break the headlines in particular places, just so that the mobile platform names don't break.

  Then that's what you want to do No Break to the names.

• I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

  I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

  A question = a post in these Forums.

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/465e87c6-5289-4027-B414-7251bdfecc0e

  Answered in another Thread.

  Mick Murphy - Microsoft partner

• How can I receive the follow-up call drom rechnician in India by the company who worked inside my computer and told me he would call back to finish the next day but was not back asking.

  Arround a wonderful gentlerman of your warming suppourt June 21 advanced team in India loged in my computer and started the process of unlocking me Real Player and Film of the Photo as well and window frreeing my computer to its State frozen close. He said he had to call the next day to finish his work, but never called me back. Thus, I am unable to use the Real Player or your Film or Photo each now and two songs, I worked hard on that disappeared. I have sufferred a lot of grief and loss of sleep over these questions after all you at Microsoft. Including the promotion of your product among the many artists name in Tribeca, New York City in my Art Center. Please have him or a her calaber techniciam complete the unfinished work. I'm devastated but still a believer in your business.

  Sincerely

  Daniel Metelitz

  * removed *.

  E-mail address is removed from the privacy *.

  Daniel

  Unless you have initiated the call, it is DEFINITELY a scam.  We deal with dozens of them someday.  How, he proved that he was against MS?

  I also wouldn't put my phone number if I were you.

• I lost all editing features to "develop." I don't know if I did something to trigger the change.  What should I do to get back features?

  I lost all editing features to "develop." I don't know if I did something to trigger the change.  What should I do to get back features?

  Or you the hive accidentally hidden 'Basic' or one or more of the other panels in the window to develop?

  If Yes, then, right click on one of the other sections on the right side of the window of development and re - select what is missing from the menu that appears.

• How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user?

  How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user? any example?

  Fjean wrote:
  What is the independent procedure/function?

  You can create stand-alone procedure to record messages even if the transaction is rolled back messages is stored in the table and are committed.

  Example of

  SQL> DECLARE
    2    PRAGMA AUTONOMOUS_TRANSACTION;
    3    emp_id NUMBER(6);
    4    amount NUMBER(6,2);
    5  BEGIN
    6    emp_id := 200;
    7    amount := 200;
    8    UPDATE employees SET salary = salary - amount WHERE employee_id = emp_id;
    9    COMMIT;
   10  END;
   11  /
  
  PL/SQL procedure successfully completed.
  
  ---log_error procedure
  -- Table Err_tab ( seq number , time_stamp date, message varchar2(4000))
  CREATE PROCEDURE log_error (p_message VARCHAR2)  AS
    PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
    INSERT INTO Err_Tab(seq.err_seq,SYSDATE,p_message) ;
    COMMIT;
  END log_error;
  /
  
  -- You can use this procedure to log
  -- error messages as follows in a transaction
  BEGIN
    log_error('Start emp update') ;
    UPDATE emp set
    log_error('End emp update');
  EXCEPTION WHEN OTHERS
    log_error('Update Error '||SQLERRM);
  ROLLBACK ;
  END ;
  /
  Even in case of Rollback error messages will be inserted to log table 
  

  SS

• Firefox used to have an option on the next to the forward/backward buttons navigation bar that showed the browsing history - I could come back ten screens without hitting the button back ten times. Is the new version has this feature? If so, how can I a

  It was a triangle button, which provided a drop-down list of my most recent history within a site. Very convenient, esp for slide shows if I wanted to return to a slide that was 10-12 rear blades.

  Use one of the following methods to open the tab history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• BlackBerry Classic speed dial back at the top of the call screen

  I used to have 12 contacts in the upper part of the speed of call screen to compose. Now I'm down to only 8. I try to add an extra 4 it tells me that I have exceeded the maximum number allowed. I just moved to the classic, this device was working fine on my previous 3 Q10s.

  Any suggetsions?

  If you look in the 10.3.2 the user guide, it says:

  "You can add a total of eight contacts or numbers to the speed dial list on the screen of the calls.

  I also looked in the guide to the previous version (10.3.1) and it is said you can have 12 contacts. Thus, they seem to have reduced the number from 12 to 8 for some reason any.

• The call of several objects in a table

  Hello

  I tried to figure out how to appeal to several objects in a table.

  What I want to do is set the value of certain objects display in a table at certain points.

  Thus, for example;

  var CheckBox1 = this.getField("CheckBox1").value;
  var CheckBox2 = this.getField("CheckBox2").value;
  var arrObj = [
  "One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten"];
  
  if (CheckBox1 = "Yes") {
       if (CheckBox2 = "Yes") {
            arrObj[1].display = display.hidden;
            arrObj[7, 8, 9].display = display.visible;
            arrObj[4, 5, 6].display = display.noView;
            arrObj[2, 3].display = display.noPrint;
       }
       else if ...
            //do something else
  }
  

  So instead of writing 10 different set out I can condense up to maximum 4 or less in function.

  However, all the ways I tried to do it didn't and I can't find any clear examples on the web.

  Any suggestions?

  As always, any help is very appreciated.

  Thank you in advance.

  This is a potential problem with your code: in a table JavaScript, the first element is element 0 and not 1.

  Try this instead (it's just the inner loop):

  var a1 = [7, 8, 9];
  var a2 = [4, 5, 6];
  var a4 = [2, 3];
  
  if (CheckBox2 == "Yes") {
      arrObj[1].display = display.hidden;
      for (var i in a1)
          arrObj[a1[i]].display = display.visible;
      for (var i in a2)
          arrObj[a2[i]].display = display.noView;
      for (var i in a3)
          arrObj[a3[i]].display = display.noPrint;
  }