table no object Exception with RMI received call Jorckit V2740

Similar Questions

• iPhone 4s were wet. Now, everything is back to normal EXCEPT is not make or receive calls.

  iPhone 4s were wet. Now, back to normal EXCEPT will not send or receive calls. Constantly to "research".

  WHPDVM wrote:

  iPhone 4s were wet. Now, back to normal EXCEPT will not send or receive calls. Constantly to "research".

  Then, it is not back to normal. If the device cannot get a cellular connection, then you have to check with the carrier and to replace the SIM card, because it could have been damaged when the device got wet, or the appliance is damaged to the point that it won't work. If a cell phone cannot make or receive calls, it is far from normal.

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• 1 X yoga with Huawei ME906S LTE - make sure you receive calls and SMS

  I have a X 1 Yoga with Huawei ME906S LTE, is anyway that I can make and receive calls or SMS from him?

  Hello

  me906s does not support voice calls in native mode, i.e.over GSM networks. The only chance was to Voice-over-IP-over-LTE or characteristic of the VoLTE. But the firmware of the modem specification does not support the VoLTE.

  http://consumer.Huawei.com/en/solutions/M2M-solutions/products/tech-specs/me906s-158-en.htm

  About SMS support, use the connection 3rd party Manager. Or one Huawei Mobile Partner of the manufacturer. It supports SMS. There's a chance, it supports me906s.

• I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  -do not disturb - the settings on

• I received calls threatening him with an unknown entity

  I received calls threatening phone number * withdrawn * a gentleman / organization that says if we don't talk about them immediately our list with bing will be removed or replaced.  The people will respond to any question as to who they are, or what is their business and calls just keep coming.  When I finally asked the gentleman yesterday who he was with he said 'me' and hung up.  This morning we received threats of expulsion.  Who are these people and they have the power to change our list with bing?  Keele services / Fairbanks AK

  Tell them that you reported them to the Federal Trade Commission: www.ftc.gov

  They are just trying to get your personal information so they can steal your identity.

  Steve

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.

• Problem with table of object

  Hello

  I wrote a calendar program using the table of object. Its storage name correct month in the object table. But when I store the date and run the program so that a single iteration, then it runs correctly and shows me the dates for the month of January. But when I run it for 2 iterations (IE it should show me the dates of January and February), it shows me the dates of February both times. Goes same for 3 iterations IE that it correctly displays the names of months but the dates are March for all 3 iterations. Can some body please guide me?

  import java.applet.Applet;

  import java.awt.*. *;

  Javax.swing import. *;

  class calendar {}

  MonthName string;

  String the day of the week [] = new String [31]; worst case

  int [] dayNo = new int [31];

  Calendar (String monthName1, String [] dayName1, int [] dayNo1) {}

  monthName = monthName1;

  day of the week = dayName1;

  dayNo = dayNo1;

  }

  void display (int daysInMonth) {}

  int i;

  Dim str As String ="";

  String str1 = monthName;

  String str2 ="";

  for(i=0; i<daysInMonth;++i)

  ' str2 = str2 + dayNo [i] + day of the week [i] + "";

  Str = str1 + str2;

  JOptionPane.showMessageDialog (null, "Inside" + str);

  }

  }

  public class useCalendar2 {}

  Public Shared Sub main (String [] args) {}

  String [] months = {}

  "January."

  "February."

  'Market ',.

  "April,"

  «Can»,

  "June."

  "July."

  "August."

  "September."

  "October."

  "November."

  "December".

  };

  int [] daysInMonths = {31,29,31,30,31,30,31,31,30,31,30,31};

  String the day of the week [] = {'My', "Tue", "Wed", "Game", "Fri", "Sat", "Sun"};

  String [] dayNameEntireMonth1 = new String [31];

  int [] dayNo1 = new int [31];

  Calendar [] obj = new calendar [13];

  int month, day, dayNameIndex;

  dayNameIndex = 4;

  Dim str As String ="";

  for (month = 0; month < = 2; month ++) {}

  for (day = 1; day < = daysInMonths [month]; ++ day) {}

  dayNameEntireMonth1 [day 1] = day of the week [dayNameIndex];

  dayNo1 [day 1] = day;

  dayNameIndex ++;

  if(dayNameIndex==7)

  dayNameIndex = 0;

  }

  obj [month] = new calendar (month [months], dayNameEntireMonth1, dayNo1);

  }

  int i;

  for (i = 0; i < = 2; ++ I)

  obj [i]. Display (daysInMonths [i]);

  }

  }

  I tried very hard, but I can't find the error. I have written other programs of object arrays, they work very well, but it has slain. Some body please guide me.

  Zulfi.

  Thanks it worked.

  In my previous example, I was not store values, but here I store me values, so I have to use 'new' with data not primitive type i.e String.

  import java.applet.Applet;

  import java.awt.*. *;

  Javax.swing import. *;

  class calendar {}

  MonthName string;

  String the day of the week [] = new String [31]; worst case

  int [] dayNo = new int [31];

  Calendar (String monthName1, String [] dayName1, int [] dayNo1) {}

  monthName = monthName1;

  day of the week = dayName1;

  dayNo = dayNo1;

  }

  void display (int daysInMonth) {}

  int i;

  Dim str As String ="";

  String str1 = monthName;

  String str2 ="";

  for (i = 0; i<>

  ' str2 = str2 + dayNo [i] + day of the week [i] + "";

  Str = str1 + str2;

  JOptionPane.showMessageDialog (null, "Inside" + str);

  }

  }

  public class useCalendar2 {}

  Public Shared Sub main (String [] args) {}

  String [] months = {}

  "January."

  "February."

  'Market ',.

  "April,"

  «Can»,

  "June."

  "July."

  "August."

  "September."

  "October."

  "November."

  "December".

  };

  int [] daysInMonths = {31,29,31,30,31,30,31,31,30,31,30,31};

  String the day of the week [] = {'My', "Tue", "Wed", "Game", "Fri", "Sat", "Sun"};

  String [] dayNameEntireMonth1 = new String [31];

  int [] dayNo1 = new int [31];

  Calendar [] obj = new calendar [13];

  int month, day, dayNameIndex;

  dayNameIndex = 4;

  Dim str As String ="";

  for (month = 0; months)<=11; month++)="">

  dayNameEntireMonth1 = new String [31];

  for (day = 1; day)<= daysinmonths[month];="" ++day)="">

  dayNameEntireMonth1 [day 1] = day of the week [dayNameIndex];

  dayNo1 [day 1] = day;

  dayNameIndex ++;

  if(dayNameIndex==7)

  dayNameIndex = 0;

  }

  obj [month] = new calendar (month [months], dayNameEntireMonth1, dayNo1);

  }

  int i;

  for (i = 0; i<=11;>

  obj [i]. Display (daysInMonths [i]);

  }

  }

• With the help of several classes and create an object of a class and calling its method in a different class.

  Creating a new class, I need to move my main method class SaveDate DynamicTest class. Below I've listed the code of both classes. The goal is to be able to run my class DynamicTest program. I need help to understand the process of moving my main method of a different class and creating an object of a class and calling its method.

  public class {SaveData

  private public static final map < String, Object > myCachedTreeMap = new TreeMap < String, Object > ();

  public static final List < String > getLines (final String resourceParam, final Charset charset) throws IOException {}

  System.out.println ("please:" + resourceParam);

  If {(myCachedTreeMap.containsKey (resourceParam))

  Use the file cached, to avoid a further reading.

  System.out.println ("found in memory:" + resourceParam);

  }

  else {}

  Load the file from the disk

  System.out.println ("found in memory:" + resourceParam);

  }

  Returns a null value.

  }

  Public Shared Sub main (String [] args) throws IOException {}

  String target_dir = "C:\\myfiles\\config\\en";

  Line = "C:\\myfiles\\config\\en\\output.txt";

  File dir = new File (target_dir);

  File files [] = dir.listFiles ();

  If (file == null: files.length < 1) {}

  System.out.println ("file list is empty...");

  return;

  }

  Open the Printwriter

  PrintWriter OutputStream = new PrintWriter (output);

  try {}

  for (textFile file: files) {}

  If (textFile.isFile () & & textFile.getName () .endsWith (".txt")) {}

  readFromDisk (textFile);

  }

  }

  }

  {Finally

  outputStream.close ();

  }

  String fileNameFromCache = "en_synonyms.txt";

  Sheet1 = myCachedTreeMap.get (fileNameFromCache) object;

  System.out.println (fileNameFromCache + ": \n" + "Sheet1");

  }

  @SuppressWarnings ("resource")

  private static Sub readFromDisk(File textFile) throws FileNotFoundException, IOException {}

  BufferedReader InputStream;

  inputStream = null;

  String content = "";

  try {}

  inputStream = new BufferedReader (new FileReader (textFile));

  content = readFile (textFile);

  System.out.println ("bytes read =" + content.length ());

  Save the content

  FileContentsObject Sheet1 = new FileContentsObject (System.currentTimeMillis (),

  textFile.lastModified (), content,

  textFile.getName (),

  getLines (null, null));

  Add to the map

  myCachedTreeMap.put (textFile.getName (), Sheet1);

  }

  {Finally

  If (inputStream! = null) {}

  inputStream.close ();

  }

  }

  }

  private static String readFile(File f) throws FileNotFoundException, IOException, UnsupportedEncodingException {}

  Text of StringBuilder = new StringBuilder (1024);

  read int, N = 1024 * 1024;

  char [] buffer = new char [N];

  BufferedReader br = null;

  try {}

  BR = new BufferedReader)

  (new) InputStreamReader

  (new FileInputStream (f), 'UTF8'));

  While (true) {}

  read = br.read (buffer, 0, N);

  If (read > 0)

  Text.Append (new String (buffer, 0, read));

  if(Read < N) {}

  break;

  }

  }

  }

  {Finally

  If (br! = null)

  Br. Close();

  }

  Return text.toString ();

  }

  private static final class FileContentsObject {}

  private long cachedTime; currentTime

  private long lastModifiedTimestamp;

  private string content

  List < String > lines;

  private String fileName;

  public FileContentsObject (long cachedTime, long lastModifiedTimestamp,

  Content string, String fileName, List < String > lines) {}

  this.cachedTime = cachedTime;

  this.lastModifiedTimestamp = lastModifiedTimestamp;

  This.contents = content;

  this.fileName = filename;

  This.Lines = lines;

  SimpleDateFormat sdf = new SimpleDateFormat ("MM/dd/yy hh: mm :"); ")

  System.out.println ("time & Date:" + sdf.format (cachedTime));

  System.out.println ("' last modification timestamp:" ")

  + sdf.format (lastModifiedTimestamp));

  }

  /**

  *

  * @return the lines of the file

  */

  List < String > getLines() {}

  Return this.lines;

  }

  public String toString() {}

  "return"Sheet1 {}"+" fileName =' ' + filename + '------"+", content = "" "

  + content + "\"+ ", lastModifiedTimestamp ="

  + lastModifiedTimestamp + ', CurrentTime & Date ='

  {+ cachedTime + '}';

  }

  }

  }

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  public class DynamicTest {}

  Public Shared Sub main (String [] args) {}

  Game characters charset = Charset.forName("UTF-8");

  try {}

  List < String > = CacheData.getLines lines ("en_synonyms", character set);

  If (rows! = null) {}

  System.out.println ("number of rows:" + lines.size ());

  for {(String ligne: lines)}

  System.out.println ("DynamicTest:" + line);

  }

  }

  } catch (IOException e) {}

  e.printStackTrace ();

  }

  try {}

  List < String > = CacheData.getLines lines ("en_stopwords", character set);

  If (rows! = null) {}

  System.out.println ("number of rows:" + lines.size ());

  for {(String ligne: lines)}

  System.out.println ("DynamicTest:" + line);

  }

  }

  } catch (IOException e) {}

  e.printStackTrace ();

  }

  }

  }

  I have read and watched videos about the creation of an object of a class and calling its method in a different class. I'm still confused on how to do it properly. By using the code below if someone can explain how to properly call the method of objects from my hand.

  Huh? You have NOT posted any 'hand' or any 'method of objects '.

  If you need help with the code, you need to view the code.

  The Java tutorials has dozens of trails "Classes and objects": what they are, how to create and how to use them.

  https://docs.Oracle.com/javase/tutorial/Java/javaOO/classes.html

  1. create an instance of a class

  2. call to one or more of the public methods of this class

  If the class has public static methods, you don't need to create an instance first.

  I suggest that you work your way through these tutorials. They include the WORKING example code.

• Default value in the object MessageLovInput - with results mapped to fields MessageStyledText

  Have a personalized page of the OPS with a simple LOV entry on this subject (MessageLovInput) for an account number that works very well.   User has entered an account number, the LOV works as it should and when the value is chosen I lovMappings that map a couple of fields result view-only MessageStyledText boxes indicating the name and address that was chosen.  Result - key user Acct # and the name and address appears automatically for the user for reference purposes.

  However, I have an entry point to the screen where I would like to pass a parameter to the account number and have it auto select the LOV for me so that the only 2 display fields are visible.  In my controller page, I put the default account number (accountBean.setValue(pageContext,"12345") and it works EXCEPT that it never fill the results in the only fields of 2 display for the customer does not have the reference except with force, they choose the LOV and select the address.)

  Is it possible to make the LOV "auto-run" at the entrance to the page so if there is an input value it will even act as if user keyed it?  I tried several variations of things of guide to Dev and Google for several hours and must be missing something.

  Here's the Basic code that I have in place (cut down to simplicity)

  PageCO-> ProcessRequest method:

  String acctNumber = pageContext.getParameter ("InputAccountNumber");

  If (acctNumber! = null)

  {

  Lov OAMessageLovInputBean = webBean.findChildRecursive ("AccountNumber");

  lov.setValue (pageContext, acctNumber);

  }

  With just the code above, when the screen lorsque l' ecran commence begins has the InputAccountNumber appropriate in the account number field and correctly displayed.  The other fields only 2 screen remain blank well.  If I make a form submission (PageCO-> ProcessFormRequest), it correctly handles the LOV selection as well.

  I tried to add the code to the stream to instantiate the LOV VO with the appropriate value and it works - selects the LOV properly and has a vo.getRowCount (1) because I expect.  But it's as if she doesn't have the lovMappings to the map screen.

  Any suggestions?

  Objects involved are:

  MessageLovInput (with the region associated with listOfValues, tables and lovMappings, including mappings in Nom_tiers areas and address MessageStyledText)

  LovVO-> query VO Sql Simple that is the query for the LOV (i.e. not based on an EO)

  LovAM-> separate AM which houses the LovVO and is listed on the MessageLovInput

  LovCO-> separate CO which house the PR and PFR for MessageLovInput field

  PageCO-> controller for the page-> code LOV is the room above that sets the value.

  PageAM-> AM for the page-> have you tried including the LovVO in its data model and it set aside.  Have you tried including a reference to the LovAM and removing it - same results

  Got this working.  As aJohny said, I essentially had to manually set the other fields in the PR.  Had to do it in the PR of the PageCO since the LovCO is not called until the user interacts with the specific field of the MessageLovInput.

  For reference, here's a rough description of what I had to do.

  PageCO-> controller of main page in the ProcessRequest method:

  (1) pick up the parameter and done a setValue on the MessageLovInput to the main field of LOV visible by the user.

  (2) calls LovAM to initialize the specific LOV with the input parameter (see section LovAM below)

  (3) calls LovAM to return the LovVO

  (4) Gets the first line of the LovVO and fills the fields of the MessageStyledText (if there is only 1 line returned.  If 0 or 2 + it doesn't fill the dependent fields)

  LovAM-AM for the LOV-> a > code to initialize the LovVO as follows

  (1) Gets the LovVO

  (2) setWhereClause (null) and setWhereClauseParams (null)

  (3) setWhereClause to include the input parameter

  (4) executeQuery

  (5) If no input parameter then it gets just the LovVO and setWhereClause (null) (null) /setWhereClauseParams

  LovCO-> controller of the LOV

  (1) in PR-> call LovAM to initialize the VO with an empty/null input parameter.  This allows user to key in a new account number in the entry field Lov and it works.  In the contrary case, it always binds in the account number which is entered into the page as a parameter.

  This method seems to work after a series of tests.  Seems like overkill for the lovMapping themselves and the feature base LOV all done automatically.  I expect to be able to do something to force the instantiate LOV and do its normal operations.  But I could never get this to work in the PageCO in the ProcessRequest method.

  Thank you

• BlackBerry Smartphones problems receiving calls on my new Blackberry Curve 8520

  My new Blackberry curve is not receive calls. I tried to take the battery out, connect to the orange network and change the profiles manually. any help would be appreciated.

  Thank you, Caroline.

  Hello!

  I suggest the following:

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > BBKey (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then I suggest that contact your operator voice services are controlled by them.

• Changing table via the package with immediate execution (problem)

  Hello

  I have a unusual problem. I have a package that contains the procedure that via execute immediate statement, creates a table on which he performs different actions for example:

  -alter table some_owner.dummy_table noparallel

  -create index some_owner.idx_name on some_owner.dummy_table (column)...

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  There must be a problem why a package cannot change the table which is owned by the user 'SOME_OWNER '.

  All useful responses would be appreciated.

  I have a unusual problem.

  No - you don't have. This question has been answered SEVERAL times on this forum and others.

  But I only managed to run move and create synonym table/public via execute immediate statement. Actions as alter table and create index fails with error ORA-01031: insufficient privileges.

  OK - your username doesn't have privileges to do these operations or only received privileges through roles.

  Roles are DISABLED in named PL/SQL blocks that use of the AUTHOR's rights.

  Note If call these commands outside the package (a simple script) this all done OK.

  I found a way, where I set the AUTHID CURRENT_USER command create package statement. In this way all the actions executed OK.

  Of course - the roles are NOT disabled in named PL/SQL blocks that use the rights of the APPELLANT or in anonymous blocks.

  I wonder why I can't change the table via the package with immediate execution on a table that is in the tablespace "SOME_TABLESPACE" and the title of owner "SOME_OWNER", without putting the AUTHID command on the package.

  Well now you know!

• Hidden Subtypeattributes in the table of object

  Hello
  
  Can someone clear this up for me?
  I had a supertype of tPerson, containing the attributes firstname, lastname, phonenr etc...
  
  I created a peopletable, based on the tPersonobjecttype.
  
  I created a subtype of tPerson, called tWebUserand added some attributes like emailaddress and password.
  
  Now, it is possible to insert instances of tPerson in the table, but it is (obviously) also possible to insert instances of the subtype tWebUser.
  
  Here's my question: where are the additional of the subtype attributes stored? If you do a describe table statement, you see just the columns store the attributes of supertype, if I do a select (normal) to the table, I see only the attributevalues, which belong to the supertype tPerson. But when I do a select using as tWebUser, I see all the attributes of the file tEpmloyee .
  
  Can anyone clear this up for me? I have created a few small business to become familiar with the Oracle objects and using tables to objects, but I have found no documentation about it.
  
  hereby the code to reproduce:

  -- Create the tPerson object
  create or replace type tPerson as object
  ( firstname    varchar2(50)
  , middle_name  varchar2(50)
  , lastname     varchar2(150)
  , phonenr      varchar2(15)
  , gender       varchar2(10)
  ) not final
  /
  
  -- Create the object table based on tPerson
  create table persons of tPerson;
  
  -- Create a subtype tWebUser
  create or replace type tWebUser under tPerson
  ( emailaddress   varchar2(150)
  , secretpassword varchar2(100)
  )
  /
  
  -- Insert a row the normal way
  insert into persons values(  'Peter', null, 'Boekelaar', '555 NETHERLANDS','M');
  
  -- Insert a row as an object
  insert into persons values(  tPerson('John', null, 'Doe', '555 ATHOME','M'));
  
  -- insert a row as an subtype
  insert into persons values( tWebUser('Jane', null, 'Doe', '555-ATWORK', 'F', '[email protected]', 'secretpassword' ) );
  
  select *
    from persons;
  
  FIRSTNAME  MIDDLE_NAME  LASTNAME   PHONENR          GENDER
  ---------  -----------  ---------  ---------------  ------
  Peter                   Boekelaar  555 NETHERLANDS  M
  John                    Doe        555 ATHOME       M
  Jane                    Doe        555-ATWORK       F
  
  
  select psn.*
       , treat(value(psn) as tWebUser).emailaddress   emailaddress
       , treat(value(psn) as tWebUser).secretpassword secretpassword
    from persons psn;
  
  FIRSTNAME  MIDDLE_NAME  LASTNAME   PHONENR          GENDER  EMAILADDRESS         SECRETPASSWORD
  ---------  -----------  ---------  ---------------  ------  -------------------  --------------
  Peter                   Boekelaar  555 NETHERLANDS  M
  John                    Doe        555 ATHOME       M
  Jane                    Doe        555-ATWORK       F       [email protected]  secretpassword

  Looking at the hidden using this statement columns

  select sys_nc_rowinfo$
    from persons;

  Returns only the content in the form of objects, but it is always presented as a tPerson object.
  
  See you soon,.
  Peter

  Subtype attributes are stored as columns hidden in your table of people.

  If you choose to user_tab_cols rather than describe, you can see:

  select
  column_name, data_type, data_length, hidden_column, qualified_col_name
  from user_tab_cols
  where table_name = 'PERSONS'
  ; 
  

  [url http://download.oracle.com/docs/cd/E11882_01/appdev.112/e11822/adobjadv.htm#CHDCFBJI] Documentation tells you about the types of objects are stored.