Table of clusters to CSV

Similar Questions

• Table of clusters and the cluster is a bar counter, how can I change the color individually?

  Table of clusters and the cluster is a bar counter, how do I change the color of the bar individual meter for each element of the array?  I just realized that you cannot change the properties of an element of the array without changing everything.  For scale, I had to make digital for each graduation of the scale indicators so that each measure meter in the table in the cluster has individual scales.  I also had to do some calculations for each barmeter to display the correct proportions of 0 to 100% on the scale.  Now, I'm stumped on the color of the bar counter.  Basically, if the value exceeds a set value, the meter bar should turn red.  It must be in a table to be infinitely scalable.

  Thank you

  Matt

  And yet anothr approach...

  Right click on the bar of > Options to fill > maximum fill.

  

  The fill color of the same color as the background color, then make the background color transparent.

  Drop a box of color BEHIND the bar and the size correctly.

  He has this strange background 3D with flat bar, but what the Hey, his relatives. If its important a custom color box.

  Ben

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• SQL Loader loading data into two Tables using a single CSV file

  Dear all,

  I have a requirement where in I need to load the data into 2 tables using a simple csv file.

  So I wrote the following control file. But it loads only the first table and also there nothing in the debug log file.

  Please suggest how to achieve this.

  Examples of data

  Source_system_code,Record_type,Source_System_Vendor_number,$vendor_name,Vendor_site_code,Address_line1,Address_line2,Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Control file script

  ================

  OPTIONS (errors = 0, skip = 1)
  load data
  replace
  in the table1 table:
  fields ended by ',' optionally surrounded "" "
  (
  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"
  Record_type tank "ltrim (rtrim (:Record_type)),"
  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  )
  in the Table2 table
  1 = 1
  fields ended by ',' optionally surrounded "" "
  (
  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"
  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"
  Address_line1 tank "ltrim (rtrim (:Address_line1)),"
  Address_line2 tank "ltrim (rtrim (:Address_line2)),"
  Address_line3 tank "ltrim (rtrim (:Address_line3)).
  )

  the problem here is loading into a table, only the first. (Table 1)

  Please guide me.

  Thank you

  Kumar

  When you do not provide a starting position for the first field in table2, it starts with the following after a last referenced in table1 field, then it starts with vendor_site_code, instead of $vendor_name.  So what you need to do instead, is specify position (1) to the first field in table2 and use the fields to fill.  In addition, he dislikes when 1 = 1, and he didn't need anyway.  See the example including the corrected below control file.

  Scott@orcl12c > test.dat TYPE of HOST

  Source_system_code, Record_type, Source_System_Vendor_number, $vendor_name, Vendor_site_code, Address_line1, Address_line2, Address_line3

  Victor, New, Ven001, Vinay, Vin001, abc, def, xyz

  Scott@orcl12c > test.ctl TYPE of HOST

  OPTIONS (errors = 0, skip = 1)

  load data

  replace

  in the table1 table:

  fields ended by ',' optionally surrounded "" "

  (

  Char Source_system_code (1) POSITION "ltrim (rtrim (:Source_system_code)),"

  Record_type tank "ltrim (rtrim (:Record_type)),"

  Source_System_Vendor_number tank "ltrim (rtrim (:Source_System_Vendor_number)),"

  $vendor_name tank "ltrim (rtrim (:Vendor_name)).

  )

  in the Table2 table

  fields ended by ',' optionally surrounded "" "

  (

  source_system_code FILL (1) POSITION.

  record_type FILLING,

  source_system_vendor_number FILLING,

  $vendor_name tank "ltrim (rtrim (:Vendor_name)),"

  Vendor_site_code tank "ltrim (rtrim (:Vendor_site_code)),"

  Address_line1 tank "ltrim (rtrim (:Address_line1)),"

  Address_line2 tank "ltrim (rtrim (:Address_line2)),"

  Address_line3 tank "ltrim (rtrim (:Address_line3)).

  )

  Scott@orcl12c > CREATE TABLE table1:

  2 (Source_system_code VARCHAR2 (13),)

  3 Record_type VARCHAR2 (11),

  4 Source_System_Vendor_number VARCHAR2 (27),

  5 $vendor_name VARCHAR2 (11))

  6.

  Table created.

  Scott@orcl12c > CREATE TABLE table2

  2 ($vendor_name VARCHAR2 (11),)

  3 Vendor_site_code VARCHAR2 (16).

  4 Address_line1 VARCHAR2 (13),

  5 Address_line2 VARCHAR2 (13),

  Address_line3 6 VARCHAR2 (13))

  7.

  Table created.

  Scott@orcl12c > HOST SQLLDR scott/tiger CONTROL = test.ctl DATA = test.dat LOG = test.log

  SQL * Loader: release 12.1.0.1.0 - Production on Thu Mar 26 01:43:30 2015

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 1

  TABLE1 table:

  1 row loaded successfully.

  Table TABLE2:

  1 row loaded successfully.

  Check the log file:

  test.log

  For more information on the charge.

  Scott@orcl12c > SELECT * FROM table1

  2.

  RECORD_TYPE SOURCE_SYSTEM_VENDOR_NUMBER $VENDOR_NAME SOURCE_SYSTEM

  ------------- ----------- --------------------------- -----------

  Victor Ven001 new Vinay

  1 selected line.

  Scott@orcl12c > SELECT * FROM table2

  2.

  $VENDOR_NAME VENDOR_SITE_CODE ADDRESS_LINE1 ADDRESS_LINE2 ADDRESS_LINE3

  ----------- ---------------- ------------- ------------- -------------

  Vinay Vin001 abc def xyz

  1 selected line.

  Scott@orcl12c >

• Table of clusters with graph - scale change event Y

  Hello everyone

  I have an array of Clusters with a graphic within each cluster. I need raise an event when the user, type a new value to the scale of the graphs Y and press "Enter" to apply the change. Any ideas how to trigger that?

  I am not considering event 'mouse enter' because I have other events related to that already.

  Thank you

  Dan07

  Given that the graph is in a table, you must dynamically record the event of change of scale. Typical static records are not allowed for the elements of the array, and it is not a good reason why they cannot be admitted, that's why I created an idea for allow static event registration of items in the array. I hope you go to the exchange of ideas and vote for this idea.

  

• Control of "tab" on the keyboard in the table of Clusters

  I'm trying to Polish some of my LabVIEW user interfaces so that my users can work faster in them and so that they follow more "user Windows interface standards" (or other).

  I have an array of clusters.  The cluster has 3 digits.

  When a user "focuses" on the first digital in a cluster and press the tab key, it moves the focus to the second digital.  Press tab again, and he climbs to 3rd digital.  Hit the tab key a 3rd time and it jumps to the first digital in the cluster.  I want to do is for the focus to move to the first digital in the element next to the table.

  I started playing with the case "Key Down" event that has a conditional looking for "TAB" and then check the 'FindCtrlWithKeyFocus' with the last digital.  My probes in this event show that detection of keys "TAB" works, but the "FindCtrlWithKeyFocus" never invoke a REAL output of the output of "CtrlFound?" of the node.

  Even though I didn't know if the tab has been pressed in the last item, I know right how to move the focus to the first digital within the next cluster of the table element.

  A table behaves appropriately.  I was able to get the program to work as I want with a 2d numerical values table.  However, each digital has different data entry parameters and there is also a loss of "free documentation.  I would like to find a solution because it came with another, more complex, Bay of clusters that would not be solveable with an array of 2d from a base type.

  Seems too complicated for me.

  Bonus question: the default my digital is 0.  When my user clicks on a digital the cursor is on each side of the value 0 and the user must remove 0 before their seizure.  When a number is entered through the Tab key, the entire field is selected.  When the whole field is selected, all user entries will replace the '0' original, which has been in the field.  In any case, to have all of the selected field when the user uses the mouse?

  Sorry for the post wall-of-text (and the hell of the preposition).  Thanks for your comments.

  and a snippet of code, if it is more useful for some:

  

• Problem updating a table of clusters that contain some gauges

  Hello

  I have problems when I write to an array of clusters that contain some gauges.

  I wrote an example program to illustrate the problem.

  [I create a digital, digital picture].

  I have complete 4 elements of the array with the data.

  If I shoot each element with a function Index Array and write the data in 4 indicator groups independently, I have no problem.

  If I have the wiring of the table of 4 elements in an array of clusters, the needles on the gauges redraw correctly.

  However, simply by moving the mouse on the element table causes the display to redraw this element.

  I played a bit with synchronous display and reporter Panel updates, but they do not seem to affect this behavior.

  Any thoughts?

  A picture of the problem and the VI are attached.

  When something like this pops up I usually try covering the incriminated with a transparent 2D image control.  Controls overlapping sometimes cause problems, sometimes they solve them.

• Labview Newbie question: Table of clusters

  1: I am a student

  2: this isn't homework or a project classified

  3: I'm a programmer capable enough, but it is in the textual languages. ;-)

  I have a sensor that contains 4 channels of power. I need to keep all 4 active channels, but I want to choose one of them to the chart at any given time. The data from the driver OR hardware comes in form of table of 2 elements 1 x 4 clusters.

  Normally, I had just index for the item in table 1 x 4 and feed on this cluster to the right graphic tool, but I'm missing something. I had a display of the sample driver NI of VI element, but anytime I insert blocks between the stream and the graphic I get errors "bad connection".

  I've been googling and book-research for several days now, nothing helps, I'd appreciate any help in this matter.

  in the image to ( http://dl.dropbox.com/u/4286123/LabviewHelp.jpg ), this block can I insert in the wire highlighted in order to select and only one of the 4 data, a source-controlled channels integer graph?

  Thank you very much.

  Use the Index table funtion in the palette of Array.  Wire in the index number of the wave that you want to display.

  

• Coloring items in the table of clusters

  Hello

  I have an array of clusters.

  My goal is that each element (cluster) in the table will have a different background color.

  I tried to use the color property node, but it changed the color of all clusters (not only the desired element).

  How is it possible?

  (cliché of the attached table)

  Thank you

  Leonid

  Select the color box visit the reorganize (kind of refreshment of the icon, or press Ctrl + J ) and select move to the rear. You are finished.

• entering data in the table of clusters

  Hi guys. I have 2 table of the clusters tab. My cluster have elements of different types. I need get referance data entry.

  I can do it for a whole picture about the structure of dynamic event but cannot do it for others.

  My vi as an attachment.

  Can someone help me with the solution?

  Thank you.

  Kerem

  Why don't simply duplicate you the same for table 2? I don't know what is the real problem that you are facing, but duplication worked.

• By the way the table of Clusters with binary strings via adapter LabVIEW

  I need to go through LabVIEW adapter table clusters containing binary strings.
  These data will be subsequently stored in the MySQL database.

  I need to force the option "Binary string" for the ValBinary element, even if my output array is empty.

  Is this possible?

  Used versions: TestStand 4.2.1 + LabVIEW 8.6.1

  Attached file: valbinary2.vi containing the clusters of test output array.

  Howdy Jean-Louis,

  My apologies, I'm not quite your question. You're right that LabVIEW does not know that a string is a binary star strong; LabVIEW, chain stores in a format of Pascal, looks like all the strands in the same way. Because TestStand stores strings in the C type format, on the other hand, the null (0x00) characters can be confusing when interpreting strings in TestStand as you learned to understand. That is of course why TestStand offers the feature to interpret strings as binary strings.

  As Sylvie refers to his post, to illustrate his point I created within TestSTand an array of the same type of data customized to store past out of your valbinary.vi of test data. Test patterns, I also edited the outputsome constant values to the cluster VI. (See the following screenshot). Note that the last string (named ValBinary) in the cluster contains a hexadecimal string with a null character that is inserted as the 3rd on-screen character (before the actual end of the string).

  

  Here is a screenshot of the created sequence file that calls the VI and then displays the number of items in the table from the VI to the user.  Note that the Locals.MyTestData table is empty before the execution of the sequence.

  

  Finally, as the execution of the sequence, I opened the Variables pane to view the contents of the Locals.MyTestData table. Here, I have confirmed that the "binary" string of LV was successfully passed in and stored by TestStand.

  

  Finally, the popup message in the second step of the sequence shows indeed a message indicating there were two elements in Locals.MyTestData.

  This sequence has been able to run successfully even without manually specifying a size of Locals.MyTestData beforehand. TestStand dynamically allocated the necessary elements to store the results of test valbinary.vi.

• Table of clusters change an item in several loops

  Hello, sorry for my bad English.

  I have an array of clusters, clusters of other tables and controls.

  

  I want to access each control individually in the table, in several loops to avoid data loss. I know that I can refer to each control in the cluster and change its values, but he changes the values in the table too.

  

  Or I can access the cluster I want in the table, but I can't access each control individually.

  

  If I do something like this im going to given loose.

  

  So what can I do?. What is the most effective way to do it?

  Thanks in advance.

  Looks like you really need, it's a reference to value of data on the table.  Then, you use the Structure of elements in Place to access the array, the index of the item you want, and then ungroup by name to get the desired control.  Do the reverse to clean it up and save the data.

• Convert the appearance of the table of clusters to multicolumn listbox or vice versa

  Hi all.

  Attached you can see two different controls. On the left side, there is an array of clusters. On the right side, you can find a multicolumn listbox.

  Is it possible to change the appearance of each of them to be like others? I mean, is - can I change the appearance of the multicolumn list box to resemble the matrix of clusters (with the same cell border thickness, appearance of the cell, etc.)?, or vice versa?

  Furthermore, is it possible to add headers to each column in the table in the clusters? I wrote several headers, but they are separated from the table, just pasted text.

  Thank you
  Francisco.

  You can get a lot more close anyway, if not all the way there.

  On each field in the cluster, you can right click and replace it with a classic Simple of the string, that is not indented and is similar to designing of listbox. Play and I'm sure you can get very close this flat look of worksheet.

  You can probably also use a classic version of the bunch, but if replace you it seems to clear out, so you will need to copy the design of field to another.

  /Y

• Export all tables of database in CSV

  I use Oracle 10 g Release 2
  
  I need to export all tables of database on an oracle schema to it's corrosponding to the CSV files.
  
  Can I use 'EXP U_name/pswd GRANTS = Y TABLES = (table_A, table_B, table_C)'. ?
  
  All advice is a plus.
  Thanks in advance
  Jay

  PL post OS and database versions.

  If you have access to run the export to database utilities, and then use the parameter TABLES as you pointed

  exp - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_export.htm#sthref1927
  expdp - http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#sthref135

  HTH
  Srini

• Error creating table with clusters

  Hello
  I tried the following

  CREATE CLUSTER emp_dept (deptno NUMBER(3))

  Cluster is created
  
  Then I tried to create the table with the cluster above but giving error:
  

  create table emp10 (ename char(5),deptno number(2) )cluster emp_dept(deptno);

  The error is:

  ORA-01753 column definition incompatible with clustered column definition

  Could you please help me in this

  Your cluster is based on a NUMBER data type (3), while the emp10 table has a deptno column with a data type of NUMBER (2).