Table of waveform does not change with time
Hi all
I have attached the VI I'm working. I haven't done any progress with VI after watching a few tutorials and read. I probed the entrance to the waveform graph, and it is simply not chaning over time (x-axis). What should I do? Data works very well.
Sorry end that. Here, it's in 2010
Dynamic data wires are blue SNO - they can take almost all data - (some of us older users despise them as much as express screws) hang a DDT directly by a waveform chart to your question the WC provided by default Datatype DDT. Conversion of the scalar measure express vi everyone downstream forced to accept that the data was just a simple DBL.
Tags: NI Software
Similar Questions
-
Cursor does not change with the selection tool
If anyone has experienced this? My cursor suddenly does not change with the selection tools when working on the photos. Once I roll over the image, the arrow disappears and becomes a strange 3 little things, so cannot do any work with precision. Still using 7 PS in Windows 7. It wasn't a problem before. Already uninstalled and reinstalled and the problem is still there. I searched where this can be corrected. So far, no luck. Any suggestions?
Three cursors display in Photoshop, Bridge, and Camera Raw (Windows 7)
-
Peripheral USB take two tests at work and does not start with Time Machine drive connected
I have a 2015 mid Macbook Pro 15 "work (so I can't afford to take this service for a period of days). My specs are:
I am running the latest version of El Capitan, 10.11.4.
My problem is that USB devices - such as Logitech USB headsets, USB sticks, external hard drives, etc. - always and I always say, require two plugins to be detected by the system. It doesn't work the first time. I always have to connect once, remove it and plug it in again.
In addition, if I try to boot the system with my Time Machine/external USB HD drive, it won't start at all. Only if I reboot without all the devices connected it boot successfully.
My questions are: is it a software or a hardware problem? And someone saw this before? I think it's a hardware problem, although the last notes of patch involve the last update of OS may have addressed a similar issue with audio devices. (This would affect my Logitech USB headset no doubt, but it did not help). If it is a hardware problem that requires a fix of the motherboard, I can't do it, since the new it's a working machine that I can't part with for a long period of time, unless SHE is willing to trade me a machine on-site. It does not affect other most operation every day except that I need to plug devices twice, all the time.
Thank you, everyone.
Try this-
How to reset the NVRAM on your Mac - Apple Support
Reset the management system (SCM) controller on your Mac - Apple Support
-
X 220 pen orientation does not change with the rotation of the screen
I upgraded to SSD HDD so made a clean install of Windows 7 Pro and load all the drivers. But pen entry orientation remains in mode of landscape even after I flip for reverse Portrait/Portrait/Landscape screen inverted modes.
I tried to update the driver for WACOM pen several times without success. What I'm missing here?
I own the X201T, but since you have a clean install I'll probably try the following:
1 remove any drivers from Wacom/Lenovo/Windows (compressed ISD) touch panel--> programs & features
2. launch Windows Update and see if he can find a driver for you
3. If so, let it install and try if this is equivalent
If that does not work, remove all new and try the same thing with the Lenovo update utility. Usually, when either one detects that the tablet drivers are missing, they pick those most recent. Of course the most recent are not always the best, but... I had a lot of problems with the Wacom drivers and Lenovo, so I eventually leave Windows Update searching for me.
I lose the pressure sensitivity in Photoshop and ended up installing drivers from Fujitsu, but that's another story entirely.
-
Time Machine does not work with Time Capsule, after update of Yosemite to iMac 2011
My Time Capsule features all work except when trying to access files with Time Machine. It is new and can be linked to an update in Yosemite. Tried rebooting both without success.
You can mount the drive of TC in the finder?
The old backup Time Machine may be usable via a direct opening so the sparsebundle to give it a try.
If not, do you want to achieve... you want to migrate your files? Have you tried the migration assistant?
-
L420 screen brightness does not change with the function keys
I installed the last dryers and since then I am unable to change the brightness of the display using the function keys. I installed several driver updates from where it is difficult to know which driver is causing the problem. The pointers in this area would be a good help.
The latest driver Intel HD (from Intel) is originally this issue. Uninstall and reinstall the driver provided by Lenovo.
-
Hello world
A quick question... I hope someone can answer...
I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.
What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?
Kind regards
Jack
I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.
The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.
-
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
Get all the different values in a table - 'or array elements' does not work with I32
Hello
I just found out that "array elements or" does not work with a table 1 d of integer values. I didn't expect that.
I did a semi quick forum search and did not find a pointer to an effective solution. Can someone give me a hint?
Do not back my initial intention is to list all the values that appear in an array of integers.
I thought that if I converted the figures for powers of 2 and or I had solved the problem at hand - only to discover that the elements of array does not.
If someone could propose a different approach, I'd be happy too.
I should mention that the execution time is a factor here - I need a fast code, but any suggestions are welcome because they could help me get started.
Best regards Florian
Hi Florian.
try this:
"Function, it seems, the table of GOLD ' is polymorphic (as written in the context-sensitive help), but does not support arrays of I32. At least the error message means just that...
-
ACS 'Password change rule' does not work with telnet
Hello:
I am configuring users will have to change their password when they enter a network device, the first time they connect.
I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).
In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.
I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.
Thanks for your help,
Francisco
You can use GANYMEDE + to get the change of password to work.
Does not work with the RADIUS.
-
Fields on several Internet sites have been changed in another language. The browser is set to English, and this problem does not occur with Chrome. Specifically, a large part of Tumblr and Facebook menu has been changed in another language (Russian, I think). I tried reinstall Firefox, clear the cache and reset firefox to its default state. None of them helped. Any suggestions on how to fix this?
Hey again,
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
I hope this helps!
Curtis
-
I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6. Any suggestions?
Thank you
To work with iOS 9.2, you must update iTunes to 12.4 v.
-
Let's say I'm surfing a Web site. Any Web site. I type domain.com and start riding on the inside pages. "Domain.com" in the URL bar does not change.
Also, if I visit two sites in a row and both have some favicons, I'll be stuck with the favorite of the first icon.
They seem to be indications that the file that contains the details of the bookmarks and history is locked or damaged. This link should help - http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
I use LR CC on MAC OS-problem with removal of Spot, it is note all points but does not change things?
Hi bakhytz,
Could you please check if the opacity is set to the maximum value and feather is set to a lower value in your spotting tool parameters.
-
pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...
Wow!
So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.
Follow the procedure below:
- Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
- Make sure that there is no entry of Adobe on the inside.
- Then copy and paste the Hosts file in folder etc.
- We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
- When you are prompted, the authentication by password Mac,
- Be sure to select the option Replace ...
- Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
- In the affirmative. launch creative cloud application and load the list of Apps and check.
Maybe you are looking for
-
Satellite C50 - A - 16 c - screens went white
Hello I was wondering if someone could help me! I have a Toshiba Satellite C50 - A - 16 c.When I closed my laptop I clicked update and close.A while later I went to turn it back on and the screen is blank.It was on, but only in black. Then I turned b
-
To watch TV on the big screen, I installed a video card with HDMI output. (Sapphire Radeon HD6450)The software installed its own device driver (AMD Hi definition audio) but disabled my PC speakers (and the headphone jack).(The sound is displayed on t
-
Is Windows XP for me only or is it saved on the computer?
I bought a new computer and intend to give a man. I wipe the hard drive. Is it OK to use the disk provided with the computer the reintall stuff that was originally on the computer? She was registered in my name. Windows XP is registered to me or
-
2000-2312TU HP: updates to driver for Windows 10
Hey,.I just have a question on the driver updates...HP has released updates to driver for Windows 10 because I have a problem with my Wifi and its solution is likely to update my wireless driver...Any help will be appreciated!Kind regards Saboor.
-
removal of trojan:win32 / alureon.fo
How can I remove the trojan:win32 / alureon.fo of my computer it crashes all the time and this is the only problem I can find after scanning the computer