Is Windows XP for me only or is it saved on the computer?

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• In WIndows 8, the Google search for Firefox (only) appear in a column on the left side of the window.

  Firefox (25.0.1) and Google worked well together until the 26/11/2013 when a guest user searched on Google. Google search still works fine on IE and Chrome. The problem is that Firefox and only with Google. Bing, Ask, Yahoo, Wikipedia all perform and appear as expected. Installs any recent or upgrades. No other search engine returns the results in a column on the left. It's as if the guest user drags it results to the left column and the display became the default. I can't restore the previous view. I restarted Windows. I reinstalled Firefox, but that has not solved the problem. I have disabled all addons (I didn't have any) and run in safe mode, the problem persists. Aspect is default 25.0.1

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Windows Wireless Network must be started manually after you start the computer to the top.

  Have been able to automatically connect to my home wireless network for 3 years.
  All of a sudden the wireless connection fails to start. Right clicking and selecting 'Diagnose and fix' update option 'start Wireless Network '. By clicking on this solves the problem until the computer is restarted.
  So, how can I make it permanent as it used to be? (Note: bluetooth and WiFi lights are light up front and aftering diagnosis)
  Of course some service, etc. has changed, but I can't understand which should be set to 'automatic' or missing etc service/process.

  Notes:
  I put everything as advised by the site of Black Viper for Vista Ultimate SP1 standard (sevices.msc).
  Startup is normal (msconfig)
  Network and sharing Center is attributed to all (except password protected sharing)

  System: Dell XPS M2010 (no hardware changes - all original)
  OS: Vista Ultimate with XP1 update (not install them, re-installed original)

  Any advice greatly appreciated.

  Wayne

  Hi James

  Tried SFC/scannow - no problem found.

  I tried services.msc - noticed WLAN on manual, set to auto, rebooted, the problem seems to be solved.

  The big question is how does 'manual' - no account required to this idea is the only way that it connects to the home network and Internet.

  So just to let it auto update do its thing and reload the Windows updates that may have been cancelled.

  Grateful for your assistance.

  Concerning
  Wayne

• How can I get windows to remember my new password when I turn on the computer

  How can I get the computer to remember my password so that I should not put all the time that I am the only one to use it

  http://www.Lockergnome.com/Windows/2007/02/20/configure-Vista-for-automatic-logon/

  To do this, click on start and type netplwiz in the search field and press ENTER. When the user account control window appears, click on continue. In the window user accounts that appears, verify that your user account is enabled. Clearly, users must enter a user name and password to use this computer option, and then click OK. Provide the password to your user account when you are prompted, restart the computer. Vista will automatically log on with your user account.

  http://www.mydigitallife.info/2007/03/24/automatic-login-or-logon-to-Windows-Vista-without-clicking/

  A more detailed view of what you want to do.

  See you soon. Mick Murphy - Microsoft partner

• Updates Windows 7 fails to configure and restart on log on the computer.

  Original title: Windows 7 update and logon

  turn on - pc answers with, application update 1827 1827 - then, preparation configure updates of Windows - then, failure of windows updates/returning from changes - then, Shutdown - then start Windows - then, prepare to set up Windows - then, failure to perform Windows updates/revertting configuration changes - then sign on screeen and access.

  This happens at every opening of session since close to 10/10/2010.
  Help

  Hello

  Check Windows Update history, see what are updates installed successfully and which of them are pending or not. To search for updates follow the link

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  You will have to perhaps download and install the updates manually and check if that helps. Visit the link given below, download the updates that are applicable to your computer by using the KB article numbers.

  http://www.Microsoft.com/downloads/en/default.aspx

  Before installing the update set up your computer to clean the start state. To configure the computer to clean boot state follow the link below

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Only a few photos appear on the computer downloading cameras

  I have an iMac 2009 with an Intel Core 2 Duo 3.06 GHZ and 4 GB of memory.  I went to Mt. Lion El Capitan (it took 26 hours) and in a first time had trouble even finding my 20 000 photos.  A call to Apple support found hidden away but now when I try to upload pictures from my Canon 70 d and G7X only some pictures appear on the computer and the rest of the screen shows the contours of the boxes.  When I try to download even these pictures the computer says that they are trying to download, but they are not.  Any help would be appreciated because I don't have much computer knowledge (63 years old and still learning!).  If I need of more memory and my poor old computer just can't handle more pictures?

  How do you try to download the images from the cameras.

• Windows XP - error Windows-No disk but only when a disc is in the drive...

  I get this only when im trying to use a drive, it was working at does very well and ive tried everything I can think of, but nothing works...

  It is of the complete error:
  Windows - no disk
  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Everyone please PLEASE please help...

  Thank you very much...

  Hello Sweetlilwolf,

  Thank you for visiting the Microsoft answers community.

  I found another thread discussing this issue. Please take a look at this and there is information that has helped other people with the same problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/696fae8f-462F-4e08-8315-1dadc38f02f9

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 for slow LAN XP file transfer; but not the other way around

  I have two PCs connected via a Cat5 cable to a router Linkysys. A PC running Windows 7, the other XP SP3.  When transfer files from XP to W7 pc. I get 80 MB/s transfer speed.  However when W7 transfer to pc XP, transfer rate is about 1.5 MB/s.

  I did the following
  * netsh int tcp set global autotuninglevel is disable.
  * Disable remote differential Compression.
  * Disabled remote assistance.
  * Disabled ipv6.

  And have run the W7 pc in safe mode.  No change.

  Further reflection?

  Hello IAjason,

  Thanks for posting in the Microsoft Answers forum! Here is a link to a similar post that can provide a solution to your problem.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/c30f6649-a0d9-4f5e-8671-904a8f5469bb

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• After installing Windows Update for Malicious Software Removal Tool, continue to see the same update offered

  downloading of files from the internet, but does not install. Why?
  * original title - badly installed. version of software on my pc removal tool is October 2010. I want to update that from windows update

  Hi Joe_590,

  See the article following some possible troubleshooting:

  http://support.Microsoft.com/kb/910339

  I hope this helps!

• Why do I get a window asking for a new serial number or turn off a computer?

  I subscibed to creative cloud a week ago and have yet to use it. After the download and installation of Photoshop CS6, I am unable to open the program without a window to disable a computer or provide a different serial number. Why this is happening and how we can solve this problem? Help! I have some work to do. Thank you.

  Refer to this:

  Connect you or activation errors

  Mylenium

• cRIO only with switch ethernet connection and the computer

  Hello

  I use a cRIO-9073 connected via an ethernet switch and then to my computer and also connected to the corporate network. The cRIO connects fine (I can interact with the remote façade on the cRIO) using this method, but I can't view the remote façade when I connect just my computer for the cRIO via the ethernet switch. Where can I find the method of connection to cRIO by ethernet switch?

  Thank you

  Note: I configured manually my computer an arbitrary IP address and the subnet mask when you use only the ethernet, cRIO combo switch, no network. But I can't repeat the cRIO connection, there may be a step I'm missing.

  bermea,

  Hello! Let me be sure I understand your problem and then make a sugguestion.

  You have your PC and the cRIO connected to an ethernet switch that is also connected to your company network and you are able to see the cRIO to the MAX. However, when you have disconnected your network switch companies, leaving only the PC and the cRIO connected, you are more able to use the cRIO or see in MAX. Is this correct?

  It seems that you have indicated that you have setup your PC to have a static IP address for when it is disconnected from the network. If this is the case, you must also set the cRIO to have a static IP address. Here are some documents that can help you do this.

  • Choose a static IP address for your engine in real time
  • Why my controller cRIO not Show Up in MAX?