Table Partition 2003 server may be corrupt.

Similar Questions

• How to find tables partitioned, whose loading may fail with error ORA-14400

  Hello
  
  We have several partitioned tables. Sometimes when partitions are not created for this month, we get this error
  
  ORA-14400 does map to any partition inserted partition key
  
  May I know if there are any script or sql that I can use to discover arrays that may fail to load if DBA creates partitions in the next 2 weeks?
  
  Thank you
  Sarayu K.S.

  Of course, you can:

  1. look in DBA_TAB_PARTITIONS by nom_partition if you are using a special naming convention, where owner = and table_name = and nom_partition =

  2. without entering the name of the partition, you could use dba_tab_partitions and instead check that there is a partition to your table with a high_value you plan to use. Know that the high_value is a long data type, then you will probably need to convert it into a varchar2.

  3. before your big load, you can also insert a row into the table of destination with the new partition key that will be used and intercept errors with an exception handler. Roll it back if he succeeds.

  4. a number of partitions may be created in advance to avoid the constant surveillance of the new partitions.

  5 or you could also consider switching to interval partitioning if you're on 11 g and get out of the business of having to manually create partitions.

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer

• Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

  Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

  Hi BarbaraWolfe,
   

  There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.
  Re-install the driver by downloading it from the link given:
   
  Universal Audio Architecture (UAA) High Definition Audio class driver version 1. 0a available for Windows XP, Windows Server 2003, and Windows 2000
  Additional reference on:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Check if that helps.

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• Satellite M100-180: where can I find drivers for Win 2003 Server?

  We bought a Microsoft Windows 2003 server. I have install then on our laptop Toshiba Satellite M100-180 PSMA1E-02Q00WRU.

  With the laptop, I found Windows XP CD and Express media player recovery CD Reanimator. No disc drivers there. May be dealer lost drivers disk? If that - where can I get new CD of drivers (I am from Russia, Smolensk)

  I try to download the drivers from the web (toshiba.com.ru), but they are very large (I have a dial-up internet). Then I download driver modem (4M). Installation of the works, but no modem appear after that. And no serial port too.

  I plug the USB-serial converter and install Standart Modem (USR external). Then I have to connect to the internet and try to download the drivers with windows update. No results...

  HEEEEEEELP ME! :)

  PS Sorry for my English :)

  Hello

  : D the dealer nothing lost! The pilot tools & utilities can be created in the Windows XP operating system that came with the laptop.
  With the help of Toshiba, you will find a Protect & Fix tab and the option to create a driver disk ;)

  Further, all the XP drivers are placed on the page of the Toshiba driver. But unfortunately, nothing for Win 2003 server.
  Maybe test it works for XP drivers also on Server 2003

  To find the driver download page please go to
  http://EU.computers.Toshiba-Europe.com->-> support-> suport homepage & Downloads Download drivers

• Re: Qosmio F60 - 14 days: Win 2003 Server Enterprise Edition 32 bit installation

  We have sub notebook and need to install the W2003Server Enterprise Edition 32-bit operating system.
  Have someone handy and software for this action?

  Hello

  Operating system of the server on a laptop?

  May I ask why you want to do this? I don't see a reason for this and portable isn't designed for server systems.

  In addition, Windows 2003 Server is based on Windows XP and Qosmio F60 and XP no driver available is. It supports Windows 7 only
  Therefore, search all the drivers yourself on external pages if you really want to do this.

• Extremely slow CHKDSK on external Drobo B1200i connected to a Windows 2003 Server)

  (I have a Drobo B1200i related to an unresolved external server) windows 2003 Server), with 9 x 4, double redundancy to discs. The scoreboard shows that all drives are healthy. The player has 2 LUNs. One of the units is 16TO and used to store data, some are small files and some are large files. We found errors when you try to save this logical unit, which prompted running chkdsk. Run us CHKDSK G:/x/f/r it was launched on 22 may at 18:00. He ran steps 1-3 to 25 may, making hundreds of repairs (deleting entry index... recovery of file... orphans replacing non-security IDS valid... Insert the attribute data to place...)

  He has been blocked since May 25 (for 3.5 days) 60% of the step 4 of 5, moving very slowly. Currently, it reads "(14191283 of 20660608 processed files) all 60 percent" the number of processed files remains to be the same number of hours and moves upward then 5000 files and then a few hours left in the same issue for others... At this rate, it may take 3-4 months at the end!

  My questions are the following:

  1 - is it normal to take this amount of time with the large disk like mine (16 TB)?

  2. is there a risk of data loss if I stop it now?

  3. is there a chance that what has already been solved during the early stages is all that was needed, and that interrupts it the process now will be harmless?

  4. If I stop the process now and errors persist, and I decide to run CHKDSK again, it run faster for the early stages and get to the current point faster than the 6 days it has taken to get this far? or it will take another 6 days to join the current point?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• installation of Windows 2003 server on machine existing windows7

  IAM planning to install Windows 2003 server OS on the machine having windows7
  I would like to have a dual-boot setup where I can start/start any one of the
  operating system and start work
  Please note that I will not disturb existing OS i.e, windows7
  Please suggest...

  Assuming you want to install Windows Server 2003 on an empty hard disk or a partition:

  You can start the installation from the installation of Windows Server 2003 to start media. When you are done, follow the steps in this article to repair the boot sector: Windows startup is no longer after you install an earlier version of the operating system in a dual-boot configuration

  For additional tips for Windows Server, please post in Forum Windows Server.  Thank you!

  Carey Frisch

• P2v Windows 2003 Server

  I have a Windows 2003 Server physical that we would like P2v, but drive C has only about 100 MB remaining.  Drive D has 25 GB.    My preference is to install Converster on this server and run locally, but as the C drive is low on space, it may be better to do it remotely.   However, I was wondering if there is a way to always run locally if I install the converter on the D drive.  Is this possible?

  With only 100 MB on the left, I highly recommend you free disk space before you do anything else to avoid problems (not only related to the converter). What I did in the past in such situations, is to configure the location of the page file to the server, which will release usually a few GB (depending on its current size).

  André

• How can I fix error of muse "some files on the server may be missing or incorrect."?

  I created a separate page out of php, one for the Office site for the mobile version of the Web site.

  There is No error message when you use the desktop version of the Web site (SESSION TIMES) However, there loading the mobile version (SESSION TIMES)
  

  I changed the message to something else, but the original was "some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I don't want to remove this error because I've already tried looking for missing files, etc.

  The "missing" file was found when using the '? muse_debug = true' after the url, this can be seen in the following two tables. This file is located in the main public_html as well as I did in other sup files

  as I tried to get the script to find somewhere I thought putting it anywhere would be an option.

  

  )

  What I want to know is this is a bit of php, html or js that I can add to make it disappear and stop the pop up of projection, no patch solves the problem but it ignores

  Thank you

  Dale

  That's the problem with Muse. It's for people who don't want to mess with the code. But it seems that you or whoever created the site for you made a lot of tinkering with the code.

  I don't know how Muse structures pages and assets, but by looking at the error message, this is the style sheet that is missing.

  There are two ways I think you might be able to solve the problem. The first method I suggest is to include a link to the style sheet. For now, you link only the master styles.

  http://avocabeachpicturetheatre.com.au/phone/CSS/session-times.CSS"/ >

  If the page is not correctly displayed, delete the link to session - times.css and modify the script at the top of the page to remove session - times.css of the list:

• Table Partitioned parallelized vs

  Hello
  (11.2 server, OS = OL5)
  
  I have a table that contains more than 50 million lines. I created this table with option 'parallel degree (x).
  
  It seems that the time required to execute a query on this table does not change when I share that, for example partition range dividing the table to 3 partitions.
  
  (access the request a unique index in the table and the query criteria match exactly one of the partitions)
  
  the question:
  1. What is the difference of strategy parallelism between «Parallel degree...» "and the"Division "?
  2. which of them are better in what scenario?
  3. is it better to use PARALLEL_AUTOMATIC_TUNING?
  4 and especially why the performance doesn't change even with a local index on the partitions?
  
  Thank you
  SMSK.

  >
  It seems that the time required to execute a query on this table does not change when I share that, for example partition range dividing the table to 3 partitions
  . . .
  (access the request a unique index in the table and the query criteria match exactly one of the partitions
  . . .
  @Adam Martin: thanks, but I was explained to question 4 that the performance does not change when I toggle locality index.
  >
  I do not see why it would be necessarily change just of partitioning. What is your reason to think so?

  If the index access is used it is basically to get the IDENTIFIER of a line of interest. The line can then be retrieved using the ROWID. The recovery time will be essentially the same way regardless of the line in a partitioned table or non-partitioned table, and regardless of whether the line of partition. This is because the ROWID is (simple explanation here) a FILE ID (which file?), a BLOCK number (relative block in the file) and a LINE NUMBER (which line in the block. It doesn't matter if the segment that is the block is a segment of the table, partitioned table segment, segment index, etc.

  It is the only factor that COULD change the time of the query when the index is used if the access of the index itself is more effective when the table is partitioned when the table is not partitioned.

  Clearly if it is an overall index, there is a change since the index access itself will be the same.

  The only factor now that MIGHT change the time of the request is so if 1) the index is changed locally and 2) the local index has a different structure than the old index that allows to find the best performing required index entries.

  You have not published information on the index of structure, so let me give you an analogy which shows a scenario where it is clear that the access to the index would not change.

  Assume that the overall index is analogous to a catalogue of cards with 26 entries - one for each letter of the alphabet. My query accesses the entries beginning with the letter 'F' As discussed above in table access to aid a ROWID obtained from the index will be the same, if the table is partitioned or not.

  So now I have the partition table and have 26 partitions - one for each letter of the alphabet.

  With the help of the global index of the access to the partition of 'F' will be the same.

  Now, if I create a local index (instead of global) it's almost as if I now 26 index, one for each letter of the alphabet. The first entry for the 'F' in the global index can be found by reading the root node and perhaps one or two other nodes - then that an index scan can be performed.

  The first entry for the 'F' in the local index is at the beginning of the index - no need to jump or to do a binary search to ignore the 'A', 'B', etc. entered.

  This time difference is microscopic.

  Once I found the first entry for the 'F' either in the overall index, or local 'F' remaining entries in the index are consecutive, so access time will be the same.

  I don't know if there is a structural difference between the indices and the that you tried, but the above should show if the structure (order) has not changed it would not be a noticeable difference in access.

• ADFDI-05577: could not retrieve the data table on the server.

  Dear all,
  
  My use case is, when I opened my excellent work book, I have this error message is out ' ADFDI-05577: could not retrieve the data table on the server line "and when I click on the button 'OK' of the error message I can recover all the data on the server. Please help me how to solve this error?
  
  
  Concerning
  KT

  Thanks much Sireesha Pinninti, John Stegeman, Arun.

  Yes, my problem is of subquery. I found a solution from this site.
  http://www.DBA-Oracle.com/t_ora_01427_single_row_subquery_returns_more_than_one_row.htm,
  http://srinisboulevard.blogspot.com/2010/04/ora-01427-single-row-subquery-returns.html
  http://StackOverflow.com/questions/3804850/erroneous-ora-01427-single-row-subquery-returns-more-than-one-row / / the answer is the last line

  Before change (error subquery)

  CheckingEO.BO,
  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO) NTR_NO
  To archive the CheckingEO

  Edit it like this

  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO and Rownum = 1) NTR_NO
  To archive the CheckingEO

  Concerning
  KT

  Published by: KT on 23 May 2012 15:35

  Published by: KT on 23 May 2012 15:48

• EBS R12 - Win 2003 Server R2 Standard Setup error

  Hi Experts,
  
  It's my 8th attempt to install EBS R12 and got the same error.
  OS - Win 2003 Server R2 Standard.
  used CYGWIN, MS Visual C++ 2010 and Strawberry Perl.
  Used Oracle E-Business Suite R12 installation Windows XP steps followed all the steps... Finally even error...
  
  http://www.mediafire.com/?najx7zk8zl780x8
  
  in the link above, I've added all the screenshots of th and the log files.
  1. can I use MS Visual C++ 2010?
  2. can I use strawberries Perl?
  
  Can someone help me please... Please let me know if you need any additional info or any other file of log...
  
  Thank you
  DK

  I tried again, installation with perl 5.x and Visual c ++ 2008. And got the same error... think you can change the operating system from Win 2003 to Win 2008?

  It may be useful, but I can't confirm that, until you try the operating system.

  For the moment, I see two options-
  try to use oracle enterprise linux,
  Deployment Oracle VM model...

  I would recommend OEL.

  Thank you
  Hussein

• Windows 2003 server ASM backup

  Hello
  
  (New in ASM). I want to use ASM to manage the database on a Windows 2003 server. I looked on the information and understand I need to partition disks to raw spaces, name them, and then during the installation of Oracle, I have Oracle get all that disk space.
  
  Now, my question is: what should I use for a backup? RMAN? Export?
  
  Any ideas?
  
  Thank you
  
  VIC

  You can use FRA for RMAN backup. Create a separate FRA diskgroup and store RMAN backups, archivelogs and also flashback logs. If you are able to store your backups in the Storage Manager, you can then run RMAN backups in Storage Manager.