P2v Windows 2003 Server

Similar Questions

• Virtualization of a physical Windows 2003 Server Standard live by Ethernet

  I intend to virtualize a Windows Server 2003 server standard of Ethernet based field.

  I am currently using the VMware Workstation 10.0.1 and I noticed/hear about the possibility of using "Virtualize a physical machine" to create a testmachine identical to one of my physical servers to clients.

  The physical server is running on a network domain, and it is quite critical.

  Can confirm them, it is possible to virtualize a Windows 2003 Server?

  Is it not possible to virtualize the server for example, live by Ethernet, without disturbing it?

  Best regards, Reynir

  Your physical Windows Server 2003 machine is a domain controller or a member server standalone field?

  If your server is not a domain controller, you can do a P2V from this machine without stops services, but there are always recommend stop all non Microsoft and no VMware services before starting the conversion, just to be course, there is any alteration of the data and other services like antivirus train killing the process of converter.

  For P2V recommended, please visit: KB VMware: best practices for using and troubleshooting VMware Converter

  And for the video tutorial of the P2V with VMware: VMware KB: convert a physical machine to the Fusion, Workstation or Player using stand-alone converter

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• M70-159: need graphic driver for Windows 2003 Server

  Can someone tell me wheather I can install windows 2003 server to series M70-159 .
  I am trying to download driver for sound card and many other cards, but I'm not able to get one for windows 2003

  Hello

  AFAIK, this device was shipped only with Windows Xp. In this case only the driver for this OS are available.
  Windows 2003 server edition is not a common operating system, and unfortunately, I do not know if you will find anywhere the right Toshiba drivers for this operating system of m.

  Good bye

• RAID drivers that support Windows 2003 server for Qosmio G30 - 153

  Hello
  Where can I find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153)
  Thanks in advance.
  Haquette

  Hello

  Windows Server 2003 must support the XP drivers.
  Then, try to search RAID XP drivers!

  cordially :)

• can I install Windows 2003 server in my computer hp laptop pav14-v021tu

  Hai

  My system came with windows 8, when I bought.

  But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)

  As I have not super-hotel with this stuff,

  some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work

  Thank you

  Hello:

  The technician is correct on the sata drivers are needed.

  The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.

  Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset.  Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.

• Windows 2003 - server problem

  When I try to connect my windows 2003 Server service, it gives below error:

  12029 - unknown error.

  On the internet I can find that 12029 - could not establish a connection to the server.

  Legacy code is written in VB6.

  Code:

  objXmlHttp.open "POST", modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "WSURL"), False
  objXmlHttp.setRequestHeader "Content-Type", "application/x-www-formulaires-urlencoded.
  objXmlHttp.setRequestHeader 'Permission', modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "Release")
  mfurlxml = "SERVICE = VALIDATE & DATA =" & URLEncode (objDom.xml)
  "objXmlHttp.send"FUNCTION = VALIDATE & DATA ="& URLEncode (objDom.xml)
  objXmlHttp.send (mfurlxml)

  I tried all ways below to make it work. Yet my request does not reach the server. Can someone help me please?

  1 has changed the default Web site to use IP addresses (all unassigned)

  2. clear firewall problem

  3. not controlled all three boxes under Internet options-> connections-> lan settings

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Extremely slow CHKDSK on external Drobo B1200i connected to a Windows 2003 Server)

  (I have a Drobo B1200i related to an unresolved external server) windows 2003 Server), with 9 x 4, double redundancy to discs. The scoreboard shows that all drives are healthy. The player has 2 LUNs. One of the units is 16TO and used to store data, some are small files and some are large files. We found errors when you try to save this logical unit, which prompted running chkdsk. Run us CHKDSK G:/x/f/r it was launched on 22 may at 18:00. He ran steps 1-3 to 25 may, making hundreds of repairs (deleting entry index... recovery of file... orphans replacing non-security IDS valid... Insert the attribute data to place...)

  He has been blocked since May 25 (for 3.5 days) 60% of the step 4 of 5, moving very slowly. Currently, it reads "(14191283 of 20660608 processed files) all 60 percent" the number of processed files remains to be the same number of hours and moves upward then 5000 files and then a few hours left in the same issue for others... At this rate, it may take 3-4 months at the end!

  My questions are the following:

  1 - is it normal to take this amount of time with the large disk like mine (16 TB)?

  2. is there a risk of data loss if I stop it now?

  3. is there a chance that what has already been solved during the early stages is all that was needed, and that interrupts it the process now will be harmless?

  4. If I stop the process now and errors persist, and I decide to run CHKDSK again, it run faster for the early stages and get to the current point faster than the 6 days it has taken to get this far? or it will take another 6 days to join the current point?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Impossible to activate my trial version window 2003 Server 360 days

  Impossible to activate my trial version window 2003 Server 360 days

  error: product key is not valid

  You have already posted this somewhere else - no matter where you post the answer will always stay the same - no Windows operating system has a 360-day downloadable trial available.

  FC

  http://answers.Microsoft.com/message/fcabf370-9489-4c8a-AAED-ecb578fd00ca

• How to set up SFTP on window 2003 Server?

  I have FTP on a Windows 2003 server.  How could I implement SFTP on it?

  Thank you

  Michelle

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• Windows 2003 Server keeps stopping every hour on and saying that he must run the Setup program to create a domain controller.

  WINDOWS 2003 SERVER STANDARD EDITION

  HELLO TECH TECHNICAL SUPPORT ENGINEERS.

  WE HAVE WINDOWS SMALL BUSINESS SERVER 2003 STANDARD EDITION,

  WE HAVE EVEN INSTALLED AND CONFIGURED IN A WORKING GROUP, WE DO NOT WANT TO CREATE A DOMAIN CONTROLLER,

  BUT OUR SERVER IS BLOCKING DOWN IN ANY ONE HOUR AND SAY TO RUN THE SETUP PROGRAM TO CREATE THE DOMAIN CONTROLLER.

  PLEASE SUGGEST, AS WE DO NOT WANT TO CREATE DOMAIN

  CONCERNING

  DECCAN TEAM

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Cannot delete a file locked on a Windows 2003 Server

  Try to delete a file on a Windows 2003 server, but it shows "it is used by another user or program.
  Try searching for the user who opens the file but nothing found under computer management | Shared folders | Open the files.
  Able to locate the file opened using OpenedFilesView freeware but not able to release the file using the utility.

  No idea how I can remove the open/locked files?

  Thanks in advance.

  Hello HKLPG,.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.