Table set

Similar Questions

• execution of stored procedure in sql developer/sql more with a table setting?

  Hello

  I create a package with a procedure which has a cursor ref as output and a type as an input parameter.  Here is my definition of the package

  PACKAGE 
  -------
  CREATE OR REPLACE PACKAGE TEST
  As
    TYPE RefCursorType IS REF CURSOR;
    type intTableType is table of varchar2(50) index by binary_integer;
    
    PROCEDURE GETDATA (
            P_RECORDS OUT RefCursorType,           
             YEAR_LIST IN intTableType
    );  
  END;
  
  
  PACKAGE BODY
  -----------------------
  
  SET DEFINE OFF
  CREATE OR REPLACE PACKAGE BODY TEST
  AS 
  PROCEDURE GETDATA
  (
    P_RECORDS OUT RefCursorType,  
    YEAR_LIST IN intTableType  
  )
  AS 
  iYearList  IDTableType;
  BEGIN 
    --GET ARRAY COUNT
    IYEARLIST := IDTABLETYPE();
    IYEARLIST.EXTEND(YEAR_LIST.COUNT);
    
    --LOOP THROUGH LISTS AND POPULATE ARRAY
    FOR I IN YEAR_LIST.FIRST .. YEAR_LIST.LAST
    LOOP
    IYEARLIST(I) := IDTYPE(TO_CHAR(YEAR_LIST(I)));
    END LOOP;
    
     OPEN P_RECORDS FOR 
     SELECT CITHTML AS FORMATTED
      FROM dbTest.FORMATTED_HTML
    WHERE YEAR IN (SELECT * FROM TABLE(IYEARLIST))
    ;
    END GETDATA ;
  END TEST ;
  /
  
  

  I want to perform this procedure from the sql or sql developer more to see if it works properly.   The year field dbTest.FORMATTED_HTML is defined as varchar2 (20 bytes).  He has many years as well as text.

  I've used this in the past with simple stored procedures, but not those with a table setting

  var r refcursor;

  exec GETOLDDATA(:r,40);

  print r;

  How can I modify this to allow him to run my stored procedure?

  Thank you

  Just declare SQL, not type of PL/SQL:

  CREATE OR REPLACE

  TYPE Str50TblType

  AS THE TABLE OF THE VARCHAR2 (50)

  /

  CREATE OR REPLACE

  THE TEST PACKAGE

  IS

  GETDATA PROCEDURE)

  P_RECORDS ON SYS_REFCURSOR,

  YEAR_LIST IN Str50TblType

  );

  END;

  /

  CREATE OR REPLACE

  TEST OF PACKAGE BODY

  IS

  GETDATA PROCEDURE)

  P_RECORDS ON SYS_REFCURSOR,

  YEAR_LIST IN Str50TblType

  )

  IS

  BEGIN

  OPEN P_RECORDS

  FOR

  SELECT CITHTML AS FORMATTED

  OF dbTest.FORMATTED_HTML

  WHERE YEAR IN)

  SELECT *.

  TABLE (YEAR_LIST)

  );

  GETDATA END;

  END TEST;

  /

  SY.

• The part of report of a report region table setting to fill the region

  I need to make them with any part of the report, the section of report fills the width of the region, the column spacing all also in the entire region.

  The screenshot below shows the report occupies only a small part of the region. I need the region to this width to maintain the page layout consistency between pages.

  I can change the CSS so that it affects

  . Report-standard-alternatingrowcolors {}

  Width: 750px;

  }

  And then the same set the columns to specific width, but this application is displayed on a number of different resolutions, thereby affecting the specific widths is not all good.

  If I value percentage widths it does not.

  Any ideas?

  

  The following screenshot shows what I want to achieve, even if it made specific widths specifying, in px, which means that it is not scalable for different resolutions.

  

  The external table that contains the table of standard report also must be set to 100% width. Change the CSS rule:

  table[id^="report_"],
  .report-standard {
    width: 100%;
  }
  

• Creation of a value of Type Table set of 'EVERYTHING' as one of the value

  Gurus,
  
  My requirement is to create value together [table type] which would show the values [LOV] parameter of Conc Progr.
  So far, we have three these values to choose from, they are 'frozen', 'pending' and 'Test '. I managed.
  My question is,
  If the user wants to choose 'ALL' three values, how will welcome him in this game of table type values?
  Give the fourth option as ALL who would finally choose 'ALL' three values 'Frozen', 'Pending' and 'Test '.
  
  Thanks in advance.
  LDS-

  You can't have the UNION in the set of values.
  Try to create a view, which is to have the UNION with ALL.
  See the following links.
  Game table of values.
  ORA-00907 is missing a closing parenthesis in the value

  By
  VAMSi

• Help with the new Style of Table set in shape?

  I'm having all sorts of problems using the new table style trainer.  I'm not a RoboHelpHTML 8 experts (I better with version 5).  I am trying to create a table with 3 columns, of which the first is aligned to the left, the last 2 are centered.  The header (rank 1) is bold and centered.  Also I want all lines of the same thickness.  I created the table using the standard SimpleGridBlack... It is actually a line at the top... don't know what happened.  Then I ran WebHelp and the situation was identical to one here.  Then I duplicated the SimpleGridBlack and apply the new style to the table.  Then I started to make changes to the new style.  I chose the first line and made all columns centered and in bold. Because I want the columns 2 and 3 to be centered, I then selected columns even for change. He took care of column 2.  Then, I chose the last column of change. He took care of column 3.  However, the results were not what I expected. The upload does not quite show the image correctly.  The line under the "gg" is really there and the lines separating columns 1-2 and 2-3 in row 1 are really there.

  However, the first line of column 3 is not centered and lines A-B-C, D-E-F, A-D-G and H-E-B are thicker than the other lines.

  I hope that someone can help you.  It took 2 days and get a website made available for my use to get to the point that I am now.  It is a document that I am out of this week and I have a lot of tables to change.  Thanks for any help.

  Virginia

  8 HR tables are boring to say the least.

  First your alignment problems, you should take a look in the HTML itself to ensure that it is properly applied. The amoun of timers told me to center text and align and the HTML behind comes usually do. To verify here quickly.

  Regarding the double lines that you seem to be around the table, this may help, but I'm not sure that using your styles around them now.

  If you select the table as a whole, right-click right table properties > tab Table > table borders > turn off all borders of the table. Then go to this tab Table > cell borders > set the thickness to be used here, this applies to all round and will give you the lines you want.

  Good luck.

• problem with variable/table setting

  Hello

  in a flash model, I found several buttons with almost the same action script code. When you press the button a popup window with different text (for each button a single text).

  the following code in the code section, buttons, only the last two codelines are different for each button.

  (release)
  {
  _root.scrHEIGHT = 200;
  _root.scroller.scroller.gotoAndStop (2);
  _root.scroller._x = 100;
  _root.scroller._y = 90;
  _root. TM_title = "Info Box";
  _root. READ = 22;
  }

  so, I think that the entry of the single text for each button is managed in the last line '_root '. READ = 22 ".

  I also found the parts of text of belonging to the library. now, my problem is that I don't know where the connection is defined between the text and the variable READ/table. in this case, the connection is 22, but I find all well in the part of text or the property of the button when the connection is set to 22. I'm using flash cs4. anyone could help me?

  Thank you very much

  Pascal

  You said that you were able to locate the text elements in the library.  What about them implies numbers, you see?  Right click on them and examine their properties and Assembly.

  Also, what do you find in the _root.scroller.scroller framework 2?

• Table set in place to achieve separate Colomns

  How do you organize a table so that when it is opened in a spreadsheet, each value will be in a different column.  Currently have 8 'signals' incoming ' filter component Y ' enter 'build array' entering 'table in chain worksheet' with formatting % .3f.  So between a string of concanteneted so that I can add the date and time.  After that, sinking a string in the "write file".  Sorry if it's too much info, but I just want to know what I have to make adjustments.

  Thank you.

  For the "write to the spreadsheet file", there is an entry for "file path".

  If you do not connect no matter what (that you did not) it will ask for a file.

  Since you put this function in a loop, it continually will inspire you, which as you can see getting very annoying

  Right-click on the entry for 'file path' and click on ' create > control '.

  Then right-click on the control and go to "visible elements > Browse '."

  Then, you can browse a path.

  

  As for the rest of your code, I have a feeling that you get only one point at a time.

  Can you please attach your actual VI file to this topic?

  You need to create 8 shift registers.

  Use the function 'build array' to add the value y of each waveform to its respective displacement register.

  In the end, build a 2D of each table 1 d.
  Then pass this 2D array to the function "write in the spreadsheet file.

  Please let me know if I'm not explain well.

• cffunction table setting

  I have the code to get an array of jQuery to pass the MS SQL Server stored procedure for updating my next paintings.

  What is the proper way to access the passage function jQuery table?

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  < cffunction access = name 'MyFunc' = "remote" >

  < name cfargument = "MyData" type = "any" required = "true" >

  < isJSON cfif (arguments. MyData) >

  < cfset arguments. MyData = deserializeJSON (arguments. MyData) >

  < / cfif >

  < cfstoredproc procedure = "PSP" >

  < cfprocparam value = '#arguments. "MyData [1] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [2] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [3] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [4] #" CFSQLTYPE = "cf_sql_varchar" >

  < cfprocparam value = '#arguments. "MyData [5] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [6] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [7] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [8] #" CFSQLTYPE = "CF_SQL_LONGVARCHAR" >

  < cfprocparam value = '#arguments. "MyData [9] #" CFSQLTYPE = "CF_SQL_LONGVARCHAR" >

  < cfprocparam value = '#arguments. "MyData [10] #" CFSQLTYPE = 'cf_sql_date' >

  < cfprocparam value = '#arguments. "MyData [11] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [12] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [13] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [14] #" CFSQLTYPE = "cf_sql_varchar" >

  < cfprocparam value = '#arguments. "MyData [15] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [16] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [17] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [18] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [19] #" CFSQLTYPE = "cf_sql_numeric" >

  < cfprocparam value = '#arguments. "MyData [20] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [21] #" CFSQLTYPE = 'cf_sql_date' >

  < cfprocparam value = '#arguments. "MyData [22] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [23] #" CFSQLTYPE = "cf_sql_integer" >

  < cfprocparam value = '#arguments. "MyData [24] #" CFSQLTYPE = "cf_sql_integer" >

  < / cfstoredproc >

  < / cffunction >

  Additional remarks.

  (1) the suggestion ' MyServer.cfc? method = MyFunction " implies type: 'GET'.

  (2) the line of JQuery

  data: { argumentCollection: JSON.stringify ([$("#txtField1").val (), etc.])} implies

• The information in a table setting

  I created a form of a word document that contained tables.  After inputing 125 fields drop-down, I noticed that there is a formatting error in the word table.  Is there a way to fix this without having to redo the pdf form. ?

  Yes. Return to Word and make the corrections and generate a new PDF file (be careful not to overwrite the old!).

  Open the file and go to Tools - Pages - replace. Select the new file. This will import the content of pages, underlying maintaining the fields that you have already created. Of course, you may need to adjust their locations/sizes a bit...

• get the value of the attribute of Advanced Table &amp; set

  Hello
  
  I am a beginner in the OPS, that's why your help is very appreciated. _
  
  
  Can one advice me please how I can get and set values for the attributes in Advanced Tabel.
  
  I have an advanced array (dtls_advance_tbl) that contains 5 columns and I want to get the value of the attribute (class_1) and change the value of the attribute (class_1_image) on this basis.
  
  Please advice the code and what class / method I have to write it (I mean it is in the controller / VOImpl)?
  
  Thanks in advance.
  
  Kind regards... Ashraf

  No ok ok, so no need to go to rowreference or PPR.

  change the code below and the writeh in the PR of the extended controller method

  OAViewObject vo = (OAViewObject) getEmployeeSummaryVO1 ();
  Line EmployeeSummaryVORowImpl = null;

  This tells us the number of lines that were recovered in the
  Rowing together and away the extra lines as some of the
  other methods 'get County '.

  int fetchedRowCount = vo.getFetchedRowCount ();

  We use a separate iterator - even if we could scroll the
  the lines without it - because we do not want to influence the currency of the line.

  RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");

  If (fetchedRowCount > 0)
  {
  deleteIter.setRangeStart (0);
  deleteIter.setRangeSize (fetchedRowCount);

  for (int i = 0; i)< fetchedrowcount;="">
  {
  line = (EmployeeSummaryVORowImpl) deleteIter.getRowAtRangeIndex (i);

  For performance reasons, we generate ViewRowImpls for all
  Objects in view. When we need to get an attribute value,
  We use the accessors appointed instead of a generic string search.

  Number primaryKey = (Number) row.getAttribute ("EmployeeId"); / / Get two rows here at a time when you want to compare

  Number primaryKey = row.getEmployeeId ();

  If (make the comaprison here)
  {
  write your logic here
  break; only one selected line in this case
  }
  }
  }

  deleteIter.closeRowSetIterator ();

  Thank you
  Pratap

• a union with the top table setting query

  Hi all, I have a hard to write request.
  
  Something like this:
  
  Select b.SID, b.car, c.dog
  Al, bl b, cl d
  Union
  Select "name", f.dog
  FL f
  where f.dog_id = c.dog_id (using dog_id superior union)
  
  Is something like this? Or is there a better way to write it?
  Thank you very much

  Hello

  A branch of a trade UNION cannot make reference to the other branch.
  However, the two branches can reference the same subquery defined in a WITH clause, like this:

  WITH     abc     AS
  (
       SELECT      a.name
       ,     b.car
       ,     c.dog
       ,     c.dog_id
       FROM      al      a
       ,     bl     b
       ,     cl     c
       WHERE   ...
  )
  SELECT     name
  ,     car
  ,     dog
  FROM     abc
       --
      UNION
       --
  SELECT     NULL          AS name
  ,     NULL          AS car
  ,     f.animal     AS dog
  FROM     fl     f
  JOIN     abc          ON     f.dog_id     = abc.dog_id
  ;
  

  I hope that's what you want.
  If not, post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data (formatted, between------)

   tags).                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
  

• In case of substitution in a table setting fit

  Hi all

  With the help of TCS3 under Windows 7 64-bit. Specifically, the framework 10.0.0.388

  I'm having problems formatting and I hope someone can help me. I use tables in my document, with the CellBody paragraph tag for the text in the cells in a table (8pt Arial). However, in these cells, I also have references to other parts of a document. But these references are appearing in the body of text (Arial, 10 points). I created a character tag TableXRef with a font size 8 and applied references within these table cells, hoping that this would make the font sizes of reference of coherent picture with the rest of the text CellBody. And it looks perfect when I apply it. But - as soon as I save the document, close it and reopen it, these references are all back to being their text size original - as if the format TableXRef is deleted or replaced as soon as I open the document.

  Does anyone have any suggestions?

  TIA,

  Adriana

  I also have references to other parts of a document.

  No chance of cross reference definition format: has any in it?

  If so, delete.

  If not, add at the beginning of the definition of cross reference: could bypass everything that happens.

  I don't have the FM10 to test this and have never seen this problem on FM9 or earlier.

• Tables set the column width

  I took someone else's code and have problems with the width of the columns in a table for sizing.

  I have a table to create three columns of work. The table is 905px wide and I want column 140, 350, and the rest in width.

  If I put these values < td width = "140"... > etc., while they seem to be neglected, and the three columns are all the same width.

  It seems fine in design mode but not in Live View or published. Can someone help me to overcome this please?

  Thank you very much.

  1. Tables in HTML behave in their own way and you do not guarantee the width of columns
  2. Do not specify the widths of cell via (attributes) HTML).
     The width attribute in thetag is obsolete (the browsers are not required to support or to obey) and it was always a recommendation to the browser in any case, it was never a precise measurement are met.
  3. Learn how to your tables with CSS style

  See

  http://Veerle.Duoh.com/blog/comments/a_css_styled_table/

  http://www.ehow.com/how_2082412_style-table-CSS.html

  the http://www.google.com.au/Search?SourceId=navclient&ie=UTF-8&rlz=1T4ADFA_enAU351AU351&q=sty + tables + with + css

• Call the stored procedure to support bean w / table setting dimensional bi

  Hi all, I use jdeveloper 11g
  
  I have a requirement where instead of calling several times a "insert into" statement rather call a stored procedure, a table shipping two-dimensional bi as a parameter.
  
  The table must have size [n] [4] and [0] [0] = string and others must have numbers.
  
  This is because users will be inserting thousands of records at a time, remote sites, so the load of sending of a should be avoided.
  
  Any suggestions?
  
  Thank you.

  Miguel,
  If you use ADFbc (VO and EO sense), you can use batch insert for this archive.
  However, he must think about the user interface and how to transfer data from the client to the server taking the place of the insert.

  How you accumulate the data to insert into the DB?
  Are able to collect you say 1000 records a time and transfer them in a single segment on the server?
  How about data validation and exception handling while inserting into the db?

  I'm sure you can use a pl/sql procedure to do the Insert, but the questions above should always be answered.

  Timo

• Update table set months = the next month?

  How can update next month
  
  For example
  
  My current date = July 1, 2009 I want to this update with August 1, 2009
  
  
  Concerning
  
  
  Therese

  Hello

  You can use the ADD_MONTHS function for this.

  UPDATE  SET  = ADD_MONTHS(, 1) ;
  

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.