Table showing the history of the setting change... fact or fiction?
Guten TagI understand there's a table/view/object dictionary that changes made to the values of the parameters of database, but I can't seem to be able to find it.
Collaboration worked mentioned that the information is available in OEM so I thought there must be a table somewhere that it stores.
References to documentation or ideas are welcome.
Thank you very much!
-gary
Hello
Reference of database 'DBA_HIST_PARAMETER shows historical information about initialization settings that were in effect for the instance.
Tags: Database
Similar Questions
-
IOS XR - How to show the complete changes before committing?
In IOS XR, there is an order to see the complete changes before committing? For example:
RP/0/0 / CPU0:INET #show running-config prefix-set MYPREFIX
Mon Oct 24 15:06:16.288 ARBUE
all of the prefix MYPREFIX
the 10.0.0.0/8 32,
172.16.0.0/12 32,.
192.168.0.0/16 32
end-set
RP/0/0 / CPU0:INET #Configure terminal
Mon Oct 24 15:06:30.427 ARBUE
RP/0/0 / CPU0:inet (config) #no set prefix MYPREFIX
RP/0/0 / CPU0:inet (config) #show the configuration
Mon Oct 24 15:06:38.767 ARBUE
Building configuration...
!! Configuration of the IOS XR 6.1.1
!
no set prefix MYPREFIX
endBut I want to see the full content of all of the prefix before validation, something like this:
RP/0/0 / CPU0:inet (config) #show configuration?
no set prefix MYPREFIX
! the 10.0.0.0/8 32,
! 172.16.0.0/12 32,.
! 192.168.0.0/16 32
! - coverDitto for the political course and for the BGP neighbors. Thank you.
You can get a diff of the changes, like this:
lab01(config)#no prefix-set MYPREFIXlab01(config)#show commit changes diffWed Oct 26 15:56:21.322 CESTBuilding configuration...!! IOS XR Configuration 5.3.4 !- prefix-set MYPREFIX- 10.0.0.0/8 le 32,- 172.16.0.0/12 le 32,- 192.168.0.0/16 le 32- end-setend
-
Table shows the value of another class
I'm in the midts of this app, and it seems that when I pass in an array in a class and try to place the same object in a different context on the stage. He recalls the settings in this GPO to the previous class, even though I assign as a new instance. Talk magazine
the table looks like this
_meta:array = {category: loader_object};
My document class
_firstview = new FirstView();
_firstview. Object = _meta [0] .category; It is placed by an access modifier
_secondview = new SecondView();
_secondview. Object = _meta [0] .category;
Class FirstView()
addChild (_object);
Class SecondView()
addChild (_object);
The object from the first screen disappears now and that it appears on the second screen, but it should appear on both screens
I tried to copy the table and the object, the instantiated to new charger, but it is still giving me the same results
No explanation why there is this glich, how can an object that is not copied correctly, if they are stored in private within the class variables
I tried:
_meta. Concat();
_copyArray = _meta;
Any ideas would help
I agree with kglad... Your image loader problem is due to the same misunderstandings about object oriented programming that caused the problem in your original post.
When you instantiate a variable in AS3 (or any other oopl) you are really creating a reference or pointer to an object that is created by using the keyword 'new '.
for example, when you say:
public var myVar: ObjectType = new ObjectType();
try to think of two things happening. 1. you create a new instanmce object and 2 - you create a pointer to that object. myVar is not the object, it contains the address in memory that the new object is in. so, if at this point, you say:
public var anotherVar: ObjectType = myVar;
you assign the reference to the original object to anotherVar. Each variable points to the same object, and any changes made to one will be the effect on the other. It's when you use addChild with your two variables diff., makes the object to jump from one to the other. Boths vars pointed at the same object, so you were effectivly call add a child on the same object twice, resulting in as3 to feature new and wonderful "reparenting".
In your last post you use this code:
_categoryImg = new Loader();
_categoryImg = ImageLoader.getloader (_metaObject.category.imageLoader);
and to say that "it shows the same container loader object. It is ebcause first, you create a variable named _categoryImg and he point to a Loader object. But then you change to point to the loader found in your imageLoaderobject. I'm not sure exactly what you're trying to do, I don't suggest any code, butI think that you should look into the difference between a shallow copy and deep copy and maybe some of your frustrations will disappear.
-
The doc for the function of the subset of the table shows the extensible function
In LabView 2010 the doc for the function of the subset of the table shows that the function is expandable with indexes and multiple lengths. I can't expand the function for multiple indexes. How can I do this?
Is the documentation for the function by mistake, or is there another function of a subset of the table somewhere that can do this?
Subset of table details
When wire you an array to the function, the function is automatically resized to display entries index for each dimension of the array. If wire you a table 1 d to the function, the function displays the index for an item entries. If wire you a 2D to function, the function table displays the entries index for a line and column, respectively. If wire you a 3D through the nD to the function, the function displays the index for a page entries.
-
Query to show the organizational changes
Hello
In our discoverer set up, we have an assignment folder which contains related fields in the employees role/job e.g. fields such as pension etc., rank, organization, place, name of the job. This field has a start date and assignemnt. This beginning and date is registered for one of the fields that begin and end in this folder, for example if an employee changes job, the dates are saved in these areas and an employyes of grade chnags dates are saved in these same firelds.
Does anyone have any ideas of how I can create a report that brings back only the records that have had a change of organization? If I base it on the field of start/end it brings back employees who have had any field in the modification of this folder. Is there a condition that I can put on the report who can tell if the organization changes to an employee?
Any help will be appreciated.
Thank you
SarahHello
One way to proceed is to use a group on the ground of the organization. For example, create a report that includes the area of the Organization, the employee, min (start_date), max (end_date) identifier and max of all the other fields that you want. This should create a report that contains a single record for all employees who did not have Organization and several records for employees who.
Then create a calculation Analytics County partitioned by employee. This should return 1 for all employees who have not changed organization. You can then create a condition using this calculation, org_count > 1 to return all employees with more than one organization.
Rod West
-
ADF LOV->; UI: main table showing the fields ID and not the search values
Hello
I am very new to the development of the ADF and will have a simple question that I can't solve.
Using Oracle JDeveloper 11.1.2.0.0 I create my views and objects of entity without incident. I have an entity object that has several "search values" (these are all optional references to foreign keys to tables 'children'). Objects and relations are perfectly mapped the ADF.
In the views of child object I created the list UI tips
-Type: Combo box with list values
-the "selected" column is the "description" of the research
in the editable display object, I traced the fields 'id' to use the predefined LOVs.
This works as expected in the user interface, I created with an ADF table can be updated.
However (here's the noob question), the "id" is displayed in the search on the table column. When I click the menu drop-down I can see the description, etc, but for a professional user when they look at the table, they see an unfriendly identification number.
How can I get the part of the LOV display to show the description, while remaining linked to the ID of the parent entity.
for example, it shows
while I want to display:Country LOV1 LOV2 LOV3 United States 15 18 2
If this has been answered several times or walk through there, sorry for the redundant question, I simply can't find a solution!Country LOV1 LOV2 LOV3 United States Washington Seattle Rain
Hello
There are several ways to do this, you simply need an additional outputText next to the lov component field to display the value of the description.
If you search the forum or adf blocks, you'll find several implementations.
And here's one: http://andrejusb.blogspot.com/2010/06/lov-description-text-with-groovy.html
Gabriel.
-
What table shows the tablespace in read-only mode or read / write.
Hi all
Can someonoe help me find which table shows if a tablespace is read-write or read-only mode.
Thank you
NaveenDBA_TABLESPACES - STATUS column.
http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/statviews_4157.htm#i1627812
-
Select the set of facts to compare as a guest of dashboard
Hello
We have a requirement like this, and I don't know if this is possible in OBIEE.
We have 11 facts:
YTD actual
Expected for a YEAR
One year of the previous year
CDA - 2 prerequisite
Forecasts for the full year
Overall plan of the year
Full year last year
Round 2 years before
Round 3 years before
Round 4 years before
Round 5 years before
On a dashboard, we have 5 (for each organization) bar charts comparing the facts (for example real CDA, planned for a YEAR, full year forecast)...
However, a user wants to select any 3 of the above facts and he wants these 3 facts to account for all the 5 bar graphs in the dashboard.
Something like a selector column but based on facts (no dimensions) and as a guest of dashboard controls, rather than a report.
Any ideas on how to achieve this?
Thank you very much
Ash.Hey Ash.,.
I think that it is possible to create something like that, but in a different way.
I would create a report, with a view of column selector and a pivot table view.
In your column Chooser, you add three columns with all measures.
Then, you change the pivot table display.
The area of sections, you must add the organization.
Then you need only display the PivotTable list.
The result is a ranking by the organization.
In the composed layout, you can put the display of column selection and the entire pivot table view selector.Kind regards
Stijn -
Put the data of the set point in a waveform graph
Hello
In a graph of measure, which is the result of a waveform, I would add data of the set point as well. How can I add this data to set for the chart value?
In a control loop system, the output is controlled by a labview program. I would like to see the point of this system as well as in the graph, these thresholds are changed at random times, so I don't know how to create a waveform of these data. Should I create a waveform of the setpoint, or y at - it another option to show the set value in the chart?
See you soon,.
Rolf
That can make it much more difficult.
At one point an array of 1000 points need to be assembled (obviously). How do depends greatly on your structure. Synchronize the time of the two signals can be very difficult. It would be easy if the set value only changed once a cycle of 1000 point.
You may want to read the SP as an analog input, so you get 2 samples of the material here. In this way the two will always be synchronized. But I'm done alleady assumption, like this, the signal is an analog input (and the target value of one analogue output). What equipment do you use?
I think always need you a loop to get data and a loop to set the SP. The two loops will be more parallel execution GLSL and synchroniseent. The trick is to synchronize, or for the deterministic timestamps in two loops. If you can make that happen, you 80% there. You could do loops timed loops (using the same clock). Then you get the timestamps in two loops. The MS loop has the queue changes, pushing the value and time. Then the loop of data can use values and hours to create examples of sp 1000.
-
How to add the link change in the detail view of the interactive report?
Hello
I use APEX 5.0 on 11g XE.
I have an interactive report displaying multiple records with a column of link which is one of to an edition for the registration page. All the standard stuff 'wizard generated. I have also created a layout of the detail view. It all works very well.
However. I want IR to show detail discovers all the time and hide all Toolbar IR. How can I show the link change in the detail for each record view?
Y at - it an easy way to do this by adding a column reference (something like: #LINKCOLUMN #?) or do I need to create it manually with an < a href... > tag. I guess that this method would require me to generate a checksum with apex_util.prepare_url?
Nick
Nick4 wrote:
Good point. I agree, however, I want to keep it as an interactive report that I must keep my options open as showing the data... every customer is different, I can change my mind.
Other options are available for this. Compilation options to be exact... create IR and parts of standard report and determine who gets deployed by setting the build on the export options.
I was hoping there was an easy way to display the IR link column in the detail view, but looks like I need to create one manually in the HTML "for each line" in the detail view section.
It works, but no checksum complains...
EDIT So have added as a column in the query:
APEX_UTIL. URL PREPARE_URL('f?p=&APP_ID.:14:&session.::no::P14_CONTACT_ID:#CONTACT_ID#:', NULL, 'SESSION')
and this for the HTML:
But the URL is always wrong... #CONTACT_ID # always ends after the checksum...?
You are mixing HTML/model and SQL syntax. #CONTACT_ID # does not substitute for CONTACT_ID value in the query. The column value should be included in the URL before calculating the checksum:
... apex_util.prepare_url('f?p=' || :app_id || ':14:' || :app_session || '::NO::P14_CONTACT_ID:' || contact_id, NULL, 'SESSION') url ...
Note that substitution integrated always strings need to be referenced as bind variables in SQL to avoid unnecessary analysis.
-
Device not detected, I lost the sound. It is said that the material change
original title: device not detected
Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.
Hello! I have Dell Inspiron 1545e and I lost the sound. It is said that the material change. But I looked at the problem. But it only shows the hardware changes. Please I need help.
Have you visited the suport Dell and drivers download page for your system (by serial number would be better) and download the driver for audio and install it?
-
Purge of the records of the Table and the size of the data file
11.2.0.4/Oracle Linux 6.4
We want to reduce the size of the DB (file size of data), so that our RMAN backup size will be reduced. So, let's create stored procedures that will purge old data in huge tables.
After you remove records, we will decrease the tables using the:
change the movement line of table ITEM_MASTER enable;
change the waterfall table retractable ITEM_MASTER space;
ALTER table ITEM_MASTER deallocate unused;
The commands above will reduce the file size of data (see dba_Data_files.bytes) or it will reduce the size of the segment?
Only the segment formats will be reduced. Oracle has never reduced the sizes of data file automatically. You would have to reduce them. You may not be able to reduce the size of data file if there are extensions to the 'end' (highwatermark) data files. In this case, you will need to create a new tablespace and move all the objects for the new tablespace OR export, drop, create tablespace and import.
Hemant K Collette
-
Looking for table of the physical limits on ESXi 4.1
Hello
I searched for some kind of table showing the difference between the editions ESXi 4.1. But I always got the data from version 5 instead of 4!
I am particularly interested to know the limit of memory for each virtual on ESXi 4.1 computer free and paid editions. Well, my vSphere client tells me that my free license gives me 256 GB limit on the host hardware. That's more than enough. But what about memory for each virtual machine? What limit?
If someone is able to find this table, I appreciate it.
TIA
Ah, gotcha.
Fortunately, vRAM payments do not exist in vSphere 4 in all. This goofiness is new in vSphere 5.
-
Picture of detail showing the first main key documents during the loading of the form
Hello
I have a form of creation with a secondary table. The form and the table are two your focus on the entity with an Association between the EOs and a link between the your. When loading the form, the detail table shows records from the first main key. For example, is that master is Depts and retail employees. Primary key of the departments is deptno and deptno is a field of employees. When the form is loaded, the employee details table shows the records for the dept first in the Employees table. I want the form and load the secondary table to be empty on the form. The form is blank, but the secondary table is not. Can someone please? Thank you.See: 2.13.4 control if the data appears initially in the ADF Developer's Guide:
http://download.Oracle.com/docs/HTML/B25947_01/devproc013.htm#sthref80
-
Where is the setting to change to show when you lock shift or stopped
Original title: caps lock displaywhere is the setting to change to show when you lock shift or stopped
Hello wgkg,
It should be in the keyboard properties.
1. open the control panel
2. click on the keyboard icon
3. in the keyboard properties, click on settings in the key
4. scroll to the option of caps lock and highlight it.
5. click on the button Configure (below the list of available keys options menu)
6. in the caps lock set up a window, place a nect check mark (tick) for the "show state lock shift on the screen..." and then press the Finish button.
You will see only the option above, if you have installed the relevant keyboard/mouse drivers. If you don't see these options, that is, the options key parameters, check with the manufacturer of your keyboard, see that you have the correct drivers and 'no' the standard Microsoft drivers generic like the one provided with windows.
If her you've seen before a prompt on the screen for you say that the cover lock is enabled or disabled, but you don't see it now you probably disabled the option at some point in the past.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
Maybe you are looking for
-
Satellite U series: Question about bypassing the battery when connected on AC
Hi, I am a bit newbie to PC Toshiba laptop (series U) and I was wondering if my laptop has this feature where it bypasses the battery when it is fully charged and the power supply cable is connected?I see the battery blue led is on even when it is fu
-
Web Cam is not working on Satellite L300
Can't get webcam to work and can't find anything on the control panel to indicate how to proceed - someone help please. My laptop is Toshiba Satellite L300.
-
Wenig im DataFinder in *.tdm Datenformat Suchergebnisse
Hallo, Wenn ich in meiner Installation (SP1 10.1 DIAdem DataFinder 1.4.0.2854) mit dem Datafinder in Diadem-Datensatzen nach Regeln suche, habe ich sehr distinct results: Found werden Einträge in Dateien im *.dat Format sehr gut. (Datensatz-comments,
-
Why my laptop off at halfway but a session
Windows Vista 4 years
-
E4310 does not recognize the DVD after installed WIN7 drive
My wife has an E4310 who was no longer necessary to his office. She knows that I like to tinker with computers and the machine seems to be a decent unit. The hard disk has been removed for commercial reasons, so I installed an SSD without any hitch.