Table statement fails inside the class

When I try to run the following code, I get the error:
1120: access of undefined property myArray. for lines 4, 5, 6 and 7.
This code is copied from the Adobe documentation and works if it is placed directly in a frame. Declare a new object will fail in the same way inside the class. But another class of upper level new Date works as expected. What I'm missing here?

variable declarations are doing inside a class definition. variable assignment must be made within the constructor of the class that you are missing...

{Classes package
public class TryArray {}
var myArray:Array = new Array (); \
public void TryArray (): void {}
myArray.push ("one");
myArray.push ("two");
myArray.push ("three");
trace (myArray);
}
}
}

Tags: Adobe Animate

Similar Questions

  • call the statement box inside the case statement

    I am writing a program which requires me to run a statement box inside another case statement. Although this sounds like a simple thing, I need to be able to call the case statement using a sequence structure, where s1 sends the true value to the case, s2, a fake. Then I need to record the results of this instruction box in a text file. Attatched is a simplified version of what I'm trying to do. Please note that the way my program runs may not call the case statement without using a sequence structure, two nesting box instructions is not feasible. I hope someone out there can help me because I was stuck trying to find this for awhile.

    Thank you

    LVStudent wrote:

    [...] I can't call the case statement without using a sequence structure

    Yes you can.  You just need to be smart.

    LVStudent wrote:

    I don't think I can use a state machine to fix this.

    I think you probably can.

    With respect to your original post. What are these s1 and s2 are you talking about?  My opinion on the matter, it is that you want to select a case based on the values of several controls Boolean.  If this is correct, I do this:

    Build your Boolean controls in a table, convert the table number and insert it into the structure of your business.  No button pressed = 0, s1 = only 1, s2 = only 2 both = 3.   This works for Boolean values as much as you want and is an easy way to make a decision that depends on many entries.

  • java.sql.SQLException: JDBC LLR, table check failed for the table ' WL_LLR_ADMI

    Hello

    I am trying to install OSB in a different domain. I already have a suite of soa running.

    This is the directory structure
    Middleware/user_projects/domains

    (a) soa_domain
    (b) osb_domain

    Who, from the administration server for the BSO, I get error below.


    Error: -.
    < server failed. Reason: Last forest resource [JTAExceptions:119002] failed during initialization. The server cannot start unless all configured logging last resource (LLRs) initialize. Fault reason:
    javax.transaction.SystemException: weblogic.transaction.loggingresource.LoggingResourceException: java.sql.SQLException: check table JDBC LLR, failed for the table "WL_LLR_ADMINSERVER", line ' JDBC LLR field / / server ' record had an unexpected value ' soa_domain / / AdminServer' expected ' osb_domain / / AdminServer'* ONLY the domain and the server that creates a table original LLR can access *.



    I see the solution in https://blogs.oracle.com/epc/entry/technical_table_verify_failed_for but I have no doubt here.

    When I run

    Select RECORDSTR in the WL_LLR_ADMINSERVER where
    XIDSTR = "field of LLR JDBC / / server ';"

    I get the result like-> soa_domain / / AdminServer


    If I change it to osb_domain / / this AdminServer, will affect my soa_domain server... ? Please advice

    Published by: user10720442 on December 11, 2012 11:54

    Hello

    There are two possible solutions to this problem:

    Solution 1:

    To solve this problem reconfigures the basic information database of Point differently for each domain, if you have more than one domain. That, to change the port of the database and the name below two files in the field

    In the setDomainEnv.cmd (or .sh) file inside directory change DOMAIN_HOME/bin Point base port number and the name of the comic.

    Set POINTBASE_PORT = 9094
    Set POINTBASE_DBNAME = weblogic_eval2

    JDBC:PointBase:server://localhost:9094 / weblogic_eval2

    In the file wlsbjmsrpDataSource - jdbc.xml inside change DOMAIN_HOME/config/jdbc directory under entries with port of pointbase database updated and the name (this will be in two places in the file).

    Solution 2:

    If the domain name has been changed and do not want to change the database properties, then an update to the WL_LLR_ADMINSERVER table is possible:

    that is to say:
    Update SCHEMA_SAMPLE. Set RECORDSTR = WL_LLR_ADMINSERVER ' base_domain / / AdminServer' where XIDSTR = "JDBC LLR field / / server ';"

    Kind regards
    Kal

  • Create table statement will hang the State... in ODI... in the BI database

    Our development team is trying to create an external tabe in the database of another schema. ODI is to create the inside connection bridge. I don't know how. But whenever they get from this request, he'll hang on State. When in the same code works fine in a different database.

    Users whereby they are connceting to the source in the fire database this query have the same privileges.
    For a database, it works fine that the table is created in the target database and in the correct schema but for another, it doesn't work and hung... (not giving any results)

    Databases are used to the BI work and having almost the same configurations.
    I checked the view target database v$ session. It gives me < enq: PS - contention > event
    and three rows are back with < PX Deq: table Q narrow > event for others following two lines...

    is - can anyone shed some light on this? What should I do now. like killing the session blocking is not solve problems


    Here is an example of the executed query:

    CREATE TABLE SCHEMA_NAME. C$ _0ODS_JDE_F0004
    (C1_DTSY, C2_DTUCD1, C3_DTRT, C4_DTJOBN, C5_DTUPMJ_DT, C6_DTMRTY, C7_DTDL01, C8_DTPID,
    C9_DTMRCT, C10_DTLN2, C11_DTCNUM, C12_DTUSEQ, C13_DTUSER, C14_DTCDL, JRN_SUBSCRIBER, JRN_FLAG, JRN_DATE)
    EXTERNAL ORGANIZATION
    (TYPE oracle_datapump
    THE DEFAULT DIRECTORY DIR_SCHEMA_NAME
    LOCATION ("X58030417C$ _0ODS_JDE_F0004_1.EXP", ' X58030417C$ _0ODS_JDE_F0004_2.EXP ')
    )
    2 PARALLEL AS
    SELECT
    NVL (TRIM (F0004. (DTSY), ' ') C1_DTSY, NVL (TRIM (F0004. (DTUCD1), ' ') C2_DTUCD1, F0004. DTRT C3_DTRT,
    TRIM (F0004. C4_DTJOBN DTJOBN), J2DT (DTUPMJ, DTUPMT) C5_DTUPMJ_DT, NVL (TRIM (F0004. (DTMRTY), ' ') C6_DTMRTY;
    TRIM (F0004. DTDL01) C7_DTDL01, TRIM (F0004. DTPID) C8_DTPID, F0004. DTMRCT C9_DTMRCT, F0004. DTLN2 C10_DTLN2,
    F0004. DTCNUM C11_DTCNUM, F0004. DTUSEQ/10 C12_DTUSEQ, TRIM (F0004. C13_DTUSER DTUSER),
    F0004. DTCDL C14_DTCDL, ' ' AS JRN_SUBSCRIBER, 'I' AS JRN_FLAG, SYSDATE AS JRN_DATE
    OF SCHEMA_NAME. F0004 F0004 WHERE (1 = 1)

    -Best regards,.
    Saha

    scratched...

    -saha

  • Lint trap fails with the Classes of LV

    LV2013, LVRT 2013, Win7

    I'm working on a large (1600 + screw) of the project, for a few years now.

    Long ago, I created a program of "lint filter.  Here's what it does:

    1... make a list of all the files in all of the LLBs in the project folder and subfolders.

    2... to read a file of EXCLUSION and remove screws specified in the list.

    3 open... all HAND screw for programs (one by one).

    4.. remove this VI from the list.

    5... find out all subVIs called by this main VI. Remove them from the list.

    6... find out all subVIs called by THESE subVIs.  Remove them from the list.

    7... repeat 3-6 until all screws are covered.

    All that is left is "Lint" - live have any appellants.  If it's a dynamically called VI, I put in the EXCLUSION list and run again.

    The point is the discovery of false starts and screws I created, but not a not end up using.  I can then delete those and keep the code free of lint.

    Everything works beautifully for years, until I started to use objects (LV).  For the last month, I was including a descendants of class and severel parent in the project.

    The project works.

    However, it has generated a lot of fluff.  Some of the old code has been replaced, and I made a few false starts, he didn't screw is not used.

    The problem is - the lint filter reports now over 200 lint screws, some of them I know are really. (If I remove one, the main VI is broken).

    I traced the problem to the fact that the Classes appear to be invisible.

    Here's some code that continues the screw and subVIs, etc.. :

    The problem is - the exit CALLED this property node does not list all the LVCLASS elements, or any screws that take an entry CLASS.

    Even a simple test cases, and with a constant of CLASS and a CLASS VI, will not be displayed.

    Any normally called VI is in the list, but if it is related to a class, it is forgotten.

    Anyone have any ideas on how to make lint filter works in this case?

    Technical support comes through (thanks, Chris!) with a response:

    Given a reference of VI, there is a method (call the node) called GET VI RELATIONSHIPS that can be used.

    There are all sorts of options, which must INCLUDE all OVERRIDES THEM.

    I guess that will always leave a substitution that I wrote, but never actually call.

    Yet, this is a great step in the right direction, and it is MUCH faster than through the chain myself.

  • How to specify the tablespace for a India primary key in create table statement

    How to specify the storage space for a primary key index in a create table statement?
    Does the following statement is true?
    CREATE TABLE 'GPS'||TO_CHAR(SYSDATE+1,'YYYYMMDD')
                ("ID" NUMBER(10,0) NOT NULL ENABLE, 
                "IP_ADDRESS" VARCHAR2(32 BYTE), 
                "EQUIPMENT_ID" VARCHAR2(32 BYTE), 
                "PACKET_DT" DATE, 
                "PACKET" VARCHAR2(255 BYTE), 
                "PACKET_FORMAT" VARCHAR2(32 BYTE), 
                "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP, 
                 CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") TABLESPACE "INDEX_DATA"
                 )            
                 TABLESPACE "SBM_DATA";   
    Thank you

    Published by: qkc November 9, 2009 13:42

    As orafad noted, you can use the documentation using ESCALATION clause, i.e.

    SQL> ed
    Wrote file afiedt.buf
    
      1  CREATE TABLE GPS
      2              ("ID" NUMBER(10,0) NOT NULL ENABLE,
      3              "IP_ADDRESS" VARCHAR2(32 BYTE),
      4              "EQUIPMENT_ID" VARCHAR2(32 BYTE),
      5              "PACKET_DT" DATE,
      6              "PACKET" VARCHAR2(255 BYTE),
      7              "PACKET_FORMAT" VARCHAR2(32 BYTE),
      8              "SAVED_TIME" DATE DEFAULT CURRENT_TIMESTAMP,
      9               CONSTRAINT "UDP_LOG_PK" PRIMARY KEY ("ID") USING INDEX TABLESP
    ACE "USERS"
     10               )
     11*              TABLESPACE "USERS"
    SQL> /
    
    Table created.
    

    Justin

  • Casting table PL/SQL for the type of existing table and back ref cursor

    Hello



    I have the problem of casting a pl/sql table for the type of an existing table and turning the ref cursor to the application. Casting a ref cursor back and number of pl/sql table works well.



    Declarant

    < strong > TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities >

    within the stored procedure, fill in a table of this type temp_table_name and returning the ref cursor help

    < strong > results OPEN to SELECT * FROM TABLE (CAST (temp_table_name AS type_table_name)); < facilities >

    generates an error. type_table_name is unknown in this distribution. According to me, this happens because of the declaration of the type locally.



    Statement type_table_name inside the package specification does not work neither. Incredible, cast to the said dbms_sql.number_table to specify ref cursor back and dbms_sql package works very well!



    < strong > CREATE TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities > deals without any error but creates an invalid type complain a reference to package_name.table_name



    I don't want to declare every column in the table in type_table_name, because any change the table_name table would result in an inconsistent type_table_name.



    Thanks in advance!

    Edited by: user6014545 the 20.10.2008 01:04

    In any case you are right that there is a problem around anchorage (or maintaining) types of objects persistent to match the table structures, they may represent.

    In the case you describe, you might be better off just open the refcursor immediately the using one of the techniques described in the http://www.williamrobertson.net/documents/comma-separated.html to manage the delimited list.

    In the more general case where the line of treatment is necessary, you may make the pipeline functions.

    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    
    SQL> CREATE TABLE table_name
      2  AS
      3     SELECT ename column_name
      4     FROM   emps;
    
    Table created.
    
    SQL> CREATE OR REPLACE PACKAGE package_name
      2  AS
      3     TYPE type_name IS TABLE OF table_name%ROWTYPE;
      4
      5     FUNCTION function_name_pipelined (
      6        parameter_name IN VARCHAR2)
      7        RETURN type_name PIPELINED;
      8
      9     FUNCTION function_name_refcursor (
     10        parameter_name IN VARCHAR2)
     11        RETURN sys_refcursor;
     12  END package_name;
     13  /
    
    Package created.
    
    SQL> CREATE OR REPLACE PACKAGE BODY package_name
      2  AS
      3     FUNCTION function_name_pipelined (
      4        parameter_name IN VARCHAR2)
      5        RETURN type_name PIPELINED
      6     IS
      7     BEGIN
      8        FOR record_name IN (
      9           SELECT table_alias.*
     10           FROM   table_name table_alias
     11           WHERE  table_alias.column_name LIKE parameter_name) LOOP
     12
     13           PIPE ROW (record_name);
     14        END LOOP;
     15
     16        RETURN;
     17     END function_name_pipelined;
     18
     19     FUNCTION function_name_refcursor (
     20        parameter_name IN VARCHAR2)
     21        RETURN sys_refcursor
     22     IS
     23        variable_name sys_refcursor;
     24     BEGIN
     25        OPEN variable_name FOR
     26           SELECT table_alias.*
     27           FROM   TABLE (package_name.function_name_pipelined (
     28                     parameter_name)) table_alias;
     29
     30        RETURN variable_name;
     31     END function_name_refcursor;
     32  END package_name;
     33  /
    
    Package body created.
    
    SQL> VARIABLE variable_name REFCURSOR;
    SQL> SET AUTOPRINT ON;
    SQL> BEGIN
      2     :variable_name := package_name.function_name_refcursor ('%A%');
      3  END;
      4  /
    
    PL/SQL procedure successfully completed.
    
    COLUMN_NAME
    -----------
    ALLEN
    WARD
    MARTIN
    BLAKE
    CLARK
    ADAMS
    JAMES
    
    7 rows selected.
    
    SQL> ALTER TABLE table_name ADD (new_column_name VARCHAR2 (1) DEFAULT 'X');
    
    Table altered.
    
    SQL> BEGIN
      2     :variable_name := package_name.function_name_refcursor ('%A%');
      3  END;
      4  /
    
    PL/SQL procedure successfully completed.
    
    COLUMN_NAME NEW_COLUMN_NAME
    ----------- ---------------
    ALLEN       X
    WARD        X
    MARTIN      X
    BLAKE       X
    CLARK       X
    ADAMS       X
    JAMES       X
    
    7 rows selected.
    
    SQL>
    
  • VMware SRM Reprotect fails with Peer table ID provided in the SRM of entry is incorrect

    I have the following Setup

    Site-a.

    VMware vCenter 5.1 U1

    VMware SRM 5.1.1

    NetApp SRA 2.0.1P2

    FAS3140C - Data ONTAP 8.1.2P4

    Site-B

    VMware vCenter 5.1 U1

    VMware SRM 5.1.1

    NetApp SRA 2.0.1P2

    FAS3140C - Data ONTAP 8.1.2P4

    I created a Protection Group based at the A Site containing a single VM with a single vmdk disk on an NFS volume.

    The NFS volume is synchronous to the Site-B

    I can perform a migration scheduled to Site B, and then reprotect an another planned migration back to Site A, but then when I try to restore the reprotect again so that I am ready for an another Site-B recovery fails in the first step, configure storage for reverse Direction with " " - Failed to reverse the replication for impossible on the devices. SRA command 'prepareReverseReplication' failed. Peer table provided in the entry MRS. ID is incorrect check the newspapers RS to verify the correct peer array ID. "

    I see nothing on the files or the newspaper of SRM server logs to indicate that it is.

    This occurs for each Protection Group, I create this is not isolated to just this one volume.  I also tried with VMFS iSCSI volumes and get exactly the same results.

    If I create a Protection on the Site-B group I can get back to the Site-A and will not restore to fail to Site-B.

    Initially, I look that the issue I saw is that I could do a backspace, but could not perform a second reprotect because the SnapMirrors were left in the State of evil, but now I see that the problem is that I can't make a reprotect from Site A to Site B.

    I completely uninstalled SRM in both places, removed from the SRM database on both sites and started again but always get the same question.

    I actually IBM N series-N6040 controllers and uses IBM Data ONTAP and SRA. brand got a call open with VMware and IBM but not very far.

    Has anyone seen this problem before and got a solution?

    Now, I've identified what causes this problem and can work around it until there is a fix of NetApp.

    The issue was the name of the file on the recovering Site Server had the same name as the file server on the Site protected with a prefix to the subject, which in my case the recovering Site go was named NSERIES01 and the protection of the Site was DRNSERIES01.  Don't forget that I had already performed a failover and restoration for the protection of the Site was my original recovery Site, so yes give it the site protected for this Protection Group is DRNSERIES01 and the recovering Site has NSERIES01 on this.

    Using the task Reprotect is the first step is to call the SRA with the command prepareReverseReplication, which calls reverseReplication.pl, which is trying to verify the SnapMirror is broken.  It gets the status of all the SnapMirrors run on the recovering Site, which in this case NSERIES01.  It then goes through each of them looking for a match of the local-spin-name section: volume-name of the source of the snapmirror, for example for my test group was trying to match NSERIES01:NFS_VMware_Test, at this stage of the source of the SnapMirror is DRNSERIES01:NFS_VMware_Test which is correct, but because the script uses a pattern matching test it corresponds to NSERIES01 : NFS_VMware_Test to DRNSERIES01:NFS_VMware_Test as NSERIES01:NFS_VMware_Test is contained in DRNSERIES01:NFS_VMware_Test. It then checks if the destination of the snapmirror corresponds to the peerArrayID (that is, in this case DRNSERIES01) he does not like the destination, properly, is NSERIES01, and then reports that the peerArrayID is incorrect. If there is no match on the local-spin-name: volume-name of the source of the snapmirror, then he continues to check the destination of the snapmirror, and when it finds a match, it checks if the peerArrayID is the source of the SnapMirror, and if it checks the State of the SnapMirror is broken off.

    I've never touched the issue with the first reprotect because DRNSERIES01:NFS_VMware_Test is not contained in the source of the SnapMirror (NSERIES01:NFS_VMware_Test) and so it will be the next test of verification of the DRNSERIES01:NFS_VMware_Test in the destination of the SnapMirror, that he finds and then checks the DRNSERIES01 against the destination which is also to and finally confirms that the relationship of SnapMirror is broken-off.

    I had changed the volume on DRNSERIES01 a while ago because I thought that the question could have because of the volume being names the same, but I had changed with a suffix of _Repl on the end and so the script was always corresponding to NSERIES01:NFS_VMware_Test to _ReplNSERIES01:NFS_VMware_TestDR.

    I have now set my group of test as follows:

    Protected site

    Name of the file server = NSERIES01

    Volume name = NFS_VMware_Test_HMR

    Recovery site

    File name = DRNSERIES01

    Volume name = NFS_VMware_Test_EWC

    I can now get on the Site recovery, Reprotect, restoration, Reprotect and Fail-over again and continue achieving recoveries and reprotect again and again as often as you can re - save on VHS of Scotch tape!

    If the file on the Site B server had a suffix on its name instead of a prefix, for example, it was named NSERIES01DR, or had a name completely different then I would never hit this bug in the SRA.  I'll wait for NetApp fix SRA.  In the meantime I will be renaming all my volumes on the site of recovery as well as to avoid this problem.

  • BUG: CheckBox inside the table (ADF 11.1.2.1) colum

    I find a bug using box inside the table, these are the steps to get the bug.


    1. create a database table view object.
    2. create a view object clause where clause
    3. create a form of parameter (using where clause)
    4. create an editable filter enable table

    -AFTER THE TEST, ALL WORK

    5 convert inputText to af:selectBooleanCheckbox

    -AFTER TEST GET THIS ERROR:
    Data and tabla 1-Filter adf is ok.
    2. apply a filter by using the shape parameter and the same filter adf: time table. (The data are wrong.)


    As I say it happened only when I change my inputText to af:selectBooleanCheckbox.

    With inputText work well, with bad job booleanCheacBox...


    Anyone know if it's a bug in 11.1.2.2?

    Once you have converted the text, checkbox, you drop the attribute on the box again. It will ask you to map to a text with boolean value. You should have something like this in the pagedef. The filter of the table can then take these string values (true/false). Remove the validator/converter within the checkbox tag.

  • Rename the table require re-run the stats?

    OS: OEL (last) 64-bit
    DB: 11 GR 1 material

    I need to create a copy of a large table A in production (call of the new table B). The data are the same, but the physical layout of the tables is different (different partitioning scheme is used between table A and B).
    When I go to move table B to replace table A (which will be eventually abandoned), should I raise his stats on table B?

    It's
    (1) table to become A_OLD
    (2) table B becomes table A

    I have to raise its stats on table A in step (2)? Is there something else that needs to be done?
    (I do this to limit the impact to the GUI that uses this table - the name of the final table does not change so the GUI should not be affected).

    See you soon!

    user601798 wrote:
    Yes, I have to raise his stats on the 'new' A table even if it has the same data and the name (after renaming) but different partitioning scheme (physical model)? It seems to me that the answer would be 'yes '.
    Otherwise, not the optimizer does not fail to recognize the new partitioning?

    (1) Board toys (all data) and table Toys_New (empty)
    (2) the Toys_New table is loaded with toys data table (the two tables have the same data - only difference is partitioning)
    (2) the toys table is renamed table Toys_Old (this will be served at a later date)
    (4) table Toys_New is renamed table Toys

    And I was thinking - I forgot to talk about first-hand - Toys_New will have the same indexes, but of course the clues will have unique names from toys (to avoid the error "object already exists".

    Given that the last note, I am convinced more than stats must be run on Toys_New after step (4)

    See you soon!

    Yes, you must.

    Name of your new table is 'Toys', but this new table is totally different than the old toys. If you need to analyze the table again.

    Concerning

    Grosbois

  • Node property of a control inside the cluster within a table

    I created a control that has a cluster to a Boolean, a string, and a digital.  Then, in my front, I created a table of these custom controls.  I wish I had access to the property of the controls inside the cluster in the table.  That is to say, I want to change the color of the Boolean or blinking, or "disable and gray" text box.  I think I'm on the right track, or maybe I'm on the wrong track.  I joined and example VI (testtray.vi) and control that I use (UUT_Display.ctl).  Please excuse the use of a flat Structure of the sequence, I know it is bad programming practices, but I just wanted to throw something together.

    Any help would be appreciated.

    Kevin

    Items in a table can have different values, BUT each element of the table share the same properties.

    "Blink" is a property when you make one in tha table blink you will all Flash.

    This restriction does not apply to clusters.

    So in theory, you could develop an XControl that has a data type is an array, but the display is actually a cluster that resembles a table. But write an XControl is not a trivial task.

    Ben

  • Change the State of all the Image inside the list view toggle button when a list is tap

    Hi, please help, is there a way to change the State of a toggle button to image inside the listview where in when you type a list, the toggle button in the list state change and the other toggle button will be set to their default image? the list has a defined Image toggle button to check both...

    
    ListView {
    
                        layout: GridListLayout {
                            cellAspectRatio: 1.4
                        }
    
                        id: denominationList
                        dataModel: _model.denominationModel
    
                        listItemComponents: [
    
                            ListItemComponent {
    
                                id: component
                                type: "item"
                                CustomListItem {
    
                                    id: itemRoot
                                    dividerVisible: false
                                    highlightAppearance: HighlightAppearance.None
    
                                    Container {
                                        id: fieldContainer
                                        topPadding: 5
                                        leftPadding: 10
                                        rightPadding: 10
                                        bottomPadding: 5
                                        //maxWidth: 270
    
                                        layout: DockLayout {}
    
                                        Container {
                                            id: amountContainer
                                            //topPadding: 
    
                                            layout: DockLayout {}
                                            background: Color.create("#ffffff")
                                            horizontalAlignment: HorizontalAlignment.Center
                                            verticalAlignment: VerticalAlignment.Center
    
                                            ImageView {
                                                id: amountBorder
                                                preferredWidth: 400
                                                imageSource: "asset:///images/flux/amount-border-other.png"
                                            }
    
                                            Container {
                                                horizontalAlignment: HorizontalAlignment.Center
                                                verticalAlignment: VerticalAlignment.Center
                                                layout: StackLayout {
                                                    orientation: (!(ListItemData.name > 4) ? LayoutOrientation.TopToBottom : LayoutOrientation.LeftToRight)
                                                }
    
                                                Container {
                                                    horizontalAlignment: HorizontalAlignment.Center
                                                    verticalAlignment: VerticalAlignment.Top
                                                    visible: (ListItemData.name.length > 4)
    
                                                    preferredHeight: 60
    
                                                    Label {
                                                        id: loadPromoName
                                                        textFit.mode: LabelTextFitMode.FitToBounds
                                                        //multiline: true
                                                        visible: (ListItemData.name.length > 4)
    
                                                        textStyle{
                                                            fontSize: FontSize.Medium
                                                            fontWeight: FontWeight.W300
                                                            color: Color.create("#b9babe")
                                                            textAlign: TextAlign.Center
                                                        }
    
                                                        text: ListItemData.name
                                                    }
                                                }
    
                                                Container {
                                                    verticalAlignment: VerticalAlignment.Center
                                                    topPadding: 8
                                                    rightPadding: 0
                                                    ImageView {
                                                        visible: (ListItemData.name.length <= 4)
                                                        preferredHeight: 40
                                                        imageSource: "asset:///images/flux/pesosign-amount.png"
                                                    }
                                                }
    
                                                Container {
                                                    verticalAlignment: ((ListItemData.name.length > 4) ? VerticalAlignment.Center : VerticalAlignment.Bottom)
                                                    horizontalAlignment: HorizontalAlignment.Center
                                                    leftPadding: 0
    
                                                    Label {
                                                        id: amountLabel
                                                        textFit.mode: LabelTextFitMode.FitToBounds
    
                                                        textStyle{
                                                            fontSize: FontSize.XLarge
                                                            fontWeight: FontWeight.W300
                                                            color: Color.create("#b9babe")
                                                            textAlign: TextAlign.Center
                                                        }
    
                                                        text: ListItemData.amount
                                                    }
                                                }
                                            }
                                        }
                                    }
                                }
                            }
                        ]
                        onTriggered: {
                            var selectedItem = dataModel.data(indexPath);
    
                        }
                    }
                }
    

    link the button to a property of an element, and then change all the elements in the datamodel. ListView reflects these changes.

  • Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

    When I run pdf reader applications, I get this error:

    Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

    Hello

    1. you remember to make changes to the computer before this problem?

    2 are you able to open files from other Adobe programs?

    Follow these methods.

    Method 1: The problem is that by default, when the PDF program is used as a COM object, then it cannot be activated by the following accounts:

    (a) a Director

    (b) system

    (c) interactive

    How to solve this problem is to change the DCOM settings for the Application'S object.

    Configure DCOM

    a. click Start, type run in the start search field.

    b. type DCOMCNFG , and then press OK. (This will load the "Component Services")

    c. navigate to Component Services, click computers, my computer, DCOM Config application PDF.

    d. right-click and select Properties.

    e. Select the Security tab.

    f. in "Launch and activate permissions" select personalise and press change.

    g. press the Add button to select the "Network Service" account

    f. click on the OK button, and then test your application, it should work fine now.

    Method 2: If this does not help, you can uninstall and reinstall Adobe reader software and check.
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    You can download the latest version of Adobe reader from the following link.
    http://get.Adobe.com/reader/

  • ODI - 1228:Task Load Data - LKM File to SQL-fails on the connection target: table or view does not exist

    While performing a mapping (present in the package) that loads the file to table data, my mapping is being failed in the step - LKM file with above mentioned SQL error.

    This task is running for 30 candy Mint and loading data about 30 to 40 million for the temporary table of C$ ODI.

    Before the completion of the task is to make failure and also C$ table is also get deleted.

    Any possible resolution for above mentioned the issue?

    Problems have been solved.

    In our case, the prefix of all the data store name has been SRC_ so the nickname of all the data store became SRC, and the table name C$ depends on the daatastore Alias.

    So for executing two mapping tables $ CAN have been getting dropped by other mapping due to the same table name $ CAN.

    Change the Alias name giving it a unique name solve the problem.

  • ADFC-10001: failed to instantiate the class "oracle.apps.fnd.applcore.patterns.ui.managed.AboutPageRecordingBannerBean".

    Hello

    I have created a Web application and project UI I just create an empty page (file jspx) who use the "UI Shell" model and run in Integrated Weblogic Server, but I got under exception always. Is there advice as appropriate?

    The JDeveloper version is 11.1.1.7.5.

    ......

    Root cause]] of ServletException.

    javax.faces.FacesException: javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: failed to instantiate the class "oracle.apps.fnd.applcore.patterns.ui.managed.AboutPageRecordingBannerBean".

    at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:261)

    at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)

    at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.createComponent(UIXComponentELTag.java:267)

    at javax.faces.webapp.UIComponentClassicTagBase.createFacet(UIComponentClassicTagBase.java:537)

    at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:766)

    Truncated. check the log file full stacktrace

    Caused by: javax.faces.FacesException: oracle.adf.controller.ControllerException: ADFC-10001: failed to instantiate the class "oracle.apps.fnd.applcore.patterns.ui.managed.AboutPageRecordingBannerBean".

    at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:197)

    at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:192)

    at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:873)

    at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:111)

    at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)

    Truncated. check the log file full stacktrace

    Caused by: oracle.adf.controller.ControllerException: ADFC-10001: failed to instantiate the class "oracle.apps.fnd.applcore.patterns.ui.managed.AboutPageRecordingBannerBean".

    at oracle.adfinternal.controller.util.Utils.createAndLogFacesException(Utils.java:189)

    at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:192)

    at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:873)

    at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:111)

    at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)

    Truncated. check the log file full stacktrace

    Caused by: oracle.jbo.JboException: ADFContext Houston-29114 is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-.

    at oracle.apps.fnd.applcore.common.ApplSessionUtil.getSessionPrivate(ApplSessionUtil.java:1402)

    at oracle.apps.fnd.applcore.common.ApplSessionUtil.getNamespaceAttribute(ApplSessionUtil.java:2094)

    at oracle.apps.fnd.applcore.common.ApplSessionUtil.getSessionAttribute(ApplSessionUtil.java:2046)

    at oracle.apps.fnd.applcore.common.ApplSessionUtil.getSessionAttribute(ApplSessionUtil.java:2023)

    at oracle.apps.fnd.applcore.patterns.ui.managed.AboutPageRecordingBannerBean.getRecordingTime(AboutPageRecordingBannerBean.java:773)

    Truncated. check the log file full stacktrace

    ......

    Thank you.

    UIShell requires today a meeting of applcore be available.  Doc for this: http://docs.oracle.com/cd/E51367_01/fa_lcm_gs/OADEE/sec_usession.htm#OADEE181

    Try adding the following to your web.xml file:

     
      ApplSessionFilter
      oracle.apps.fnd.applcore.common.ApplSessionFilter
     

    ...
     
      ApplSessionFilter
      Faces Servlet
      FORWARD
      REQUEST
     

    I hope this helps!

    Oliver

    Fusion applications Developer Relations

    https://blogs.Oracle.com/fadevrel

Maybe you are looking for