tables and tabs accordions

Similar Questions

• Easy to change the owner of the TABLE (and according to indexes and views) available?

  I want to change the Owver from a TABLE (and the owner of all VIEWS and INDEXES in function).
  The only way that I know so far is something like
  
  CREATE TABLE < newschema >. < table_name > select * from < oldschema >. < tablename >;
  
  Then, slide old TABLE
  Recreate it possible all the CLUES and the views.
  
  It is kind of bulky.
  Especially when I don't know what indexes exist for a certain TABLE.
  When I investigate this and I have found 4 indexes so much work needs to be done.
  
  Is there a shorter, smarter way to accomplish the task.
  I prefer a SINGLE task of all-for-statement
  
  :-)
  
  Thank you
  Peter

  Hello
  export of diagram a (exp or expdp)
  import in diagram B (imp or impdp)

• Problems using the tools of accessibility on PDF interactive with complex tables and fields in form (in AcroDC)

  Hello

  Although I worked earlier in the accessibility check (will be abbreviated as "axs" later) before using the Checker axs documents, what he used Windows and Acrobat XI a year ago. I am now responsible for creating interactive forms that are available on a Mac (platform I prefer), that have been designed only visually in InDesign, then transferred in Acrobat X or XI where someone placed the form fields and then handed to me to settle the tab for end-users order and make them accessible to people with disabilities (Government org). Problem is, some of these documents are extremely dense arrays, in which each cell of the table is a checkbox or a radio button I have several questions:

  (1) the order of reading has something to do with the tab order? (I spent hours to get the tab order works the way it should and do not know if by clicking any axs tool that will change and cancel all my work.)

  (2) I need to mark an entire page, more or less, as a table but when I am in reading of editing tool (TURO), I get the crosshairs of hanging around that object, but when I go to playback control panel, and then click Table, everything is deselected and nothing else happens. My goal is to get to the table to label the lines headings and column editor, etc. What is going on? What I have to do all this in the Panel tags instead?

  (3) in the Panel tags, I see a table with 30 lines, which is what I have visually, but when I select the TRs and TDs nothing gets selected on the form, so I don't know how to get the content of the form "in" these TDs... it is a very complicated document and I'm getting confused. " Not a lot of experts out there on Axs AND Acrobat DC dealing with this and I'm frustrated! There's a guy on Lynda.com including videos watched re: similar topics, but in his case, he got a table which is just text and it is small, and his method is by selecting each cell of the table with the cross and he the tags labeling a 'cell', and then go in the Panel and work on the appropriate type / # Table elements slide autour stuff in the appropriate lines etc. My picture has lines 30 and 13 columns, and approaching the fields of interactive form in most of the cells... This is not practical, but do not know if there is a quick/accurate way to get the table recognized otherwise?

  Any help is appreciated...

  Sorry,

  Very frustrated

  Yes, treating large complex tables can be the chore of accessibility PDF much time and frustrating. First question - these tables of data or layout tables? Several forms are organized visually using layout tables, but do not really present data organized in rows and columns. Marking this content in a table would be run against failure condition Matterhorn Protocol 15-004, "content is marked as a table of information that is not organized in rows and columns. Instead, work in the Tags pane, drag all the elements of content out of the structure of the table and re-tag/organize according to the needs. The Suite of PDF/UA reference has an example of form (document 10) that you can refer to-although its layout tables is relatively low. A simple structure, detroit forward should be easier to fix at a large table and also easier for a user to read assistive technology.

  However, if these are legitimate data tables... I find the reading pane to be worse than useless. The Tags pane sets the reading order for assistive technology. Something that I find useful is to break down a complex table into manageable pieces, clean up the subtables can recombine. You can also consider assessing NetCentric CommonLook - I do not use it, but it has a good reputation for working with arrays. I don't think it's available for Mac, however.

• Show my windows and tabs from last time does not not in 14.0.1

  Last week, the functionality of Firefox to display the tabs from last time has stopped working. He can't have worked earlier.
  I can't find any reference to what is a matter of news, but according to the existing guidelines and what I tried, it should work.
  Any ideas?

  It is possible that there is a problem with the sessionstore.js and sessionstore.bak files in the Firefox profile folder.

  Delete the sessionstore.js file possible sessionstore-# .js files with a number and sessionstore.bak in the Firefox profile folder.

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Delete sessionstore.js will cause App Tabs and tab groups and opened and closed the tabs (back) to get lost, so you will need to create them again (take note or bookmarks).

  • http://KB.mozillazine.org/Multiple_profile_files_created

• Despite instructions from the help to get Firefox to show my windows and tabs from last time, when I close Firefox and reopen it, my windows and tabs are not there. What can I do?

  Whenever I close Firefox (when I'm leaving for a few days, or when the office closes from one day to the next day for some reason toher) and reopen it, the tabs that I got at the last session (usually calendar Google and Facebook) not open automatically. Google gmail tab is there - and I am sure that I always have to login.
  The indications 'Aid' Firefox says (1) close by clicking the Firefox button at the top of the window, then clicking on "exit". To open, click Firefox at the top, click on 'Options', select 'Général' and select ' show my windows and tabs from last time. " The option 'Show my windows etc.' was already there, but I clicked OK, then closed according to the instructions and open - Firefox to not see any tabs and windows but Google gmail.

  Previous Session Restore appears only on the homepage by default - Subject: House - not on the old Firefox Google start page - http://www.google.com/firefox or any other user defined homepage.

  There is also a menu item in the history of previous Session Restore, which does the same thing as on the subject: homepage.

• I'm reading the data (speed rate and flow) of a table and it plot in a graph.

  I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

  There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  

• Problem of sorting of tables and... Using the functionality of the case

  OK, so im do this bit of code that solves the linear equations of 3 x 3, I have most of the code actually lack just 2 small pieces for value of ascetics, garlic try to describe them as detailed as I can, no matter what type of advice or advice with any of them would be greatly appreciated

  Some details of the program:

  Equation MUST be entered in a string and not must (and probably should) be able to do some difficult fixing

  It will be limited to the +'s and-'s signs

  Problem 1.

  I don't really know how to 'sort' my equation according to their variables, example:

  User input: - 2 y + 1 * x z - 1 = 2

  I can make it look like: - 2 y + z - 1 x 1 = 2

  I want what it looks like: 1 x-2 y - 1 z = 2

  I can handle sort the equation, IF I knew the order the user will add variables, the only thing that comes to mind is turning them into a table and make a case for each (x, y, z - x, z, y - etc.) and by using some kind of process of elimination to choose the table 'longer or shorter', I really haven't got much if this because it seems like a stupid idea , but it's the only thing it comes to my mind.

  Problem 2.

  So as im fixing the spaces between characters, at least, I find a '10', I don't want one "1 0", very roughly, I managed to work around this problem by using a "find and replace String", but I'm having trouble making a "case" for her, as in, I can't understand the entry of 'right' to a string of cases. " example:

  User input: 1 x-2 y - 1 z = 12

  

  The result inside the box is correct and resembles a '12', but as I don't know the correct entry, obviously my default case is empty, and it passes through, so the result on the outside is a '1 2 '.

  Any link for someone who fixed a similar problem or guides would be great, I'd also like to announce that 3 weeks ago, I've not even knew what was "LabVIEW", if you can 'dumb down' a little explanation would be greatly appreciated.

  You can try to use php code Analyzer to help analyze. The joint was a quickly hacked together solution that makes several assumptions (a big one being that the entry is correct and equal to is the last thing). This isn't really a complete solution.

  Sorry I didn't have the time to comment on it. If it seems odd, I was using money orders that got lost, when I recorded it for the previous version.

• Recon trust AD didn't write not shooting data in USR table and console UI.

  Hello

  When we AD Trusted reconciliation, IOM pulls all the information and write it in the UD_ADUSER table, but does not fill in USR table and the IOM UI console.

  I checked the Lookup.ActiveDirectory.UM.ReconAttrMap.Trusted and the Lookup.ActiveDirectory.UM.ReconAttrMap, these searches have all mappings.

  Should I check?

  any help would be appreicated.

  Thank you

  I refreshed the reconciliation profile by clicking on the button create a profile reconciliation in reconciliation of the Console Design tab.

  After that I may jobs recon... it perfectly pulled all the attributes.

  Thank you

• Alias table and column aliases

  I'm new to the discoverer. I have some confusion.

  
  

  1. If it is possible use different aliases for the same table during the creation of spreadsheet?

  Need to produce different joins.
  

  for example:

  SELECT C1. Name, C2. Remarks

  CLIENTS C1,.

  C2 customers,

  Ticket T,

  Sale S

  WHERE C1. Client_Id = T.Client_Id AND C2. Client_Id = S.Client_Id

  2. How can I use the Alias column to show as a custom in the worksheet column heading?

  for example:

  SELECT Client_Default_Name AS name OF customers
  

  
  

  Thanks in advance.

  Hello

  first question:

  the sql worksheet is always structured according to the EUL (the end user layer). If you have used two customer tables and created a join of tables then the sql is generated according to your requirement. There is no way we can have discoverer create a sql like this. If you are interested with the sql. You can create a custom in the business district folder and paste the sql code and create a report on the top of the custom folder.

  second question:

  You can always change the topic in the discoverer more filing cabinets according to your requriement

  hope this helps

  -N.S.

• You enter a value and tab out of af:inputListOfValues displays an incorrect value

  Hello. I have a problem with the autosubmit and tab off af:inputListOfValues in my code.

  Problem: When I type in a valid value and tab out of the field, it ignores the value, I entered and displays everything the first list in the result of the query instead regardless of the value that I typed.

  My code snippet. What it does is simply a search for employee LoV unattached to an attribute of the entity, and depending on selection, it displays the name of the employee within the page. (it also retrieves a table view what employee number came into office)

  < af:inputListOfValues id = "empNoId".

  popupTitle = "search and select: #{bindings." EmpNo.hints.label}.

  value = "#{bindings." EmpNo.inputValue}.

  label = "#{bindings." EmpNo.hints.label}.

  model = ' #{bindings. " EmpNo.listOfValuesModel}.

  required = "#{bindings." EmpNo.hints.mandatory}.

  columns = "#{bindings." EmpNo.hints.displayWidth}.

  shortDesc = "#{bindings." EmpNo.hints.tooltip}.

  Binding = "#{workLocationBean.txtEmpNo} '"

  partialTriggers = "id1".

  valueChangeListener = "{bean.onEmpNoChange}" "

  autoSubmit = "true" >

  < f: validator binding = "#{bindings." EmpNo.validator} "/ >"

  < / af:inputListOfValues >

  Other things to note:

  When I enter a valid employee number and click anywhere on the page (not TAB), it behaves properly.

  I tried to figure this out for days. Even my valueChangeListener Gets an incorrect value (when I do System.out) when I tab out, so I do not know where to catch them and replace it with the correct value.

  Thank you.

  This happens usually when the primary key is not defined in the view object used by LOV.

  Dario

• Conversion tables and the entries in the table

  I'm working on a conversion table for our former products of FM unstructured to DITA. I understand the basic concepts, but I'm having a problem with the table cells.

  I have P:CellBody in my conversion table, in the first row, mapped at the entrance with a cellbody qualifier.

  I also TC mapped at the entrance.

  The same applies to P:CellHeading, and Th.

  Therefore, my text is wrapped in two input elements. The context tab to show the item says:

  entry

  entry

  line

  TBODY

  tgroup

  Table

  body

  NoName

  NoName

  I'm sure it should be the same as above with the input only one element (and of course with the fixed NoNames which I think I know how to do; I just have not had here yet).

  How to avoid get my cells wrapped in two input elements?

  Thanks in advance,

  Marsha

  Marsha,

  I don't understand what you're trying to do, or what is exactly in your conversion table. Be aware, however, that FrameMaker will always create elements for the basic elements that occur in your tables. The table of conversion that you give little control of how these items will be marked, but not question whether elements will exist.

  If your conversion table contains lines such as:

  P:CellBody	entry	cellbody
  TC:	entry

  You will get the nested input elements. External is the cell of the table itself and inside is the paragraph. FrameMaker does not have a valid document to use the tag of the element itself to a cell and a container, so aside from the results is not what you wanted, they are not correct in FrameMaker.

  If your table cells contain simple paragraphs and you don't want the elements for cells and paragraphs, your conversion table didn't even need to mention paragraph CellBody and CellHeading tags. Indeed, if your table formats using CellBody as paragraph format for cells in the body of a table and CellHeading as the paragraph format for the cells in the table, your ESD header didn't even apply the paragraph formats.

  Another alternative is to include a paragraph tag in a table row of conversion for a table cell by combining TC: and P: to match table cells containing such paragraphs. For example:

  TC: P:CellBody

  entry

  creates items named cell entry of table cells containing paragraphs tag CellBody. The paragraph in such a cell is not encapsulated in an extra element.

  One final note is that TH: in a conversion table refers to the position of the entire table. his children are header lines. The analogue of table of TH body: to:, not TC.:

  -Lynne

• using plsql table and ref cursor in oracle's 10 g

  Hi all
  Can someone give me an example of a scenario where we need to create a form manually based on a stored database procedure.
  And in this process, I created a pl/sql table and a Ref cursor at the database level.
  
  CREATE OR REPLACE PACKAGE SCOTT. TYPE BONUS_PKG IS bonus_rec
  IS (RECORD
  EmpNo bonus_EMP.empno%TYPE,
  Ename bonus_EMP.ename%TYPE,
  employment bonus_EMP.job%TYPE,
  SAL bonus_EMP.sal%TYPE,
  Comm bonus_EMP.comm%TYPE);
  
  TYPE b_cursor IS REF CURSOR RETURN bonus_rec;
  TYPE bontab IS TABLE OF bonus_rec INDEX DIRECTORY.
  
  PROCEDURE bonus_refcur (bonus_data IN OUT b_cursor);
  PROCEDURE bonus_query (bonus_data IN OUT bontab);
  END bonus_pkg;
  
  
  CREATE OR REPLACE PACKAGE BODY SCOTT. BONUS_PKG IS
  PROCEDURE bonus_query (bonus_data IN OUT bontab) IS
  II NUMBER;
  CURSOR bonselect IS
  SELECT empno, ename, job, sal, comm bonus_EMP ORDER BY empno;
  BEGIN
  OPEN bonselect.
  II: = 1;
  LOOP
  Look FOR bonselect IN
  .EmpNo bonus_data (ii),
  .ename bonus_data (ii),
  .job bonus_data (ii),
  .Sal bonus_data (ii),
  .comm bonus_data (ii);
  EXIT WHEN bonselect % NOTFOUND;
  II: = ii + 1;
  END LOOP;
  END bonus_query;
  
  PROCEDURE bonus_refcur (bonus_data IN OUT b_cursor) IS
  BEGIN
  Bonus_data OPEN to SELECT empno, ename, job, sal, comm bonus_EMP ORDER BY empno;
  END bonus_refcur;
  
  END bonus_pkg;
  
  I want to fill in the data in the forms manually is not using Forms data block Wizard and by program.
  
  Please answer...

  Can someone give me an example of a scenario where we need to create a form manually based on a stored database procedure.

  In general, you will use a block of proceedings based when you have a collection of data from several tables presented in a form and your username must be able to update the information displayed.

  In your sample code, looks like you are using Oracle Support document "Melting a block on a Stored Procedure - examples of Code [ID 66887.1]". If this is the case, continue to follow the document - it guides you through all the steps. There is no need to manually configure things that the data block Wizard will work for you!

  I want to fill in the data in the forms manually is not using Forms data block Wizard and by program.

  Why? Let the wizard block configuration data of your block based on a procedure for you. There is no need to manually browse the data! I did what you're trying, and it's more work needed. Leave forms to do the work for you. :)

  If you absolutely have to do things manually, I recommend that you use the PROCEDURE bonus_query (bonus_data IN OUT bontab) instead of bonus_refcur (bonus_data IN OUT b_cursor) . Then, in your code create a variable of type BONTAB, and then call the bonus_query procedure. Then, it's a simple case of a loop in the table of records returned by the bonus_query procedure. For example:

  DECLARE
     t_bonus    bonus_pkb.bontab;
  BEGIN
     bonus_pkg.bonus_query(t_bonus);
  
     FOR i in 1 .. t_bonus.count LOOP
        :YOUR_BLOCK.EMPLOYEE_NUMBER := t_bonus(i).empno;
        :YOUR_BLOCK.EMPLOYEE_NAME := t_bonus(i).ename;
        :YOUR_BLOCK.EMPLOYEE_JOB := t_bonus(i).job;
        :YOUR_BLOCK.EMPLOYEE_SALARY := t_bonus(i).sal;
        :YOUR_BLOCK.EMPLOYEE_COMMISSION := t_bonus(i).comm;
     END LOOP;
  END;
  

  This code example shows the basics, but as is the sample code - you will need to adapt to your situation.

  Also, I highly recommend that you look at the article inol listed. It is a very thorough debate on the REF CURSOR. If you have set up using a procedure based on the data source - it is more effective to spend the record table to your form that it must pass a ref cursor Using a ref cursor, you might as well just using a standard called cursor and loops on your named cursor. The effect is the same (a line returned at the same time creating lots of network traffic). Using the table of records is more efficient because the data set is returned if the network traffic is reduced.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• on a table AND a base view a datablock

  Hi all. I'm on developer suite 10 g.
  I want to start a block for some items on a table and some points of view.
  I would like to make a join condition in the where clause of the block and in the query data source name property I put tables and views separated by commas.
  When I go the duration I cannot run a query error.
  How can I do this from the table block and the view?
  Thank you for the collaboration,
  Fabrizio

  You can base an Oracle Forms on a join block, but you must qualify completely each element for forms know what table/view, the element also belongs. Take a look at Oracle Forms block based on a join of white paper for more information.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• DBMS_FGA.add_policy... How to handle multiple tables and multiple users

  Dear all,
  
  My database is 11 GR 1 material and Linux is the platform.
  
  I have over 50 very important tables and about 15 users database.
  
  I want to implement an audit fine-grained on these important tables.
  
  This is how I will implement:
  
  SQL > START
  () DBMS_FGA.add_policy
  object_schema = > 'Scott ',.
  object_name = > "SAL."
  POLICY_NAME = > "SALARY_CHK_AUDIT"
  audit_condition = > NULL,
  handler_schema = > 'imran.
  statement_types = > 'SELECT, INSERT, UPDATE, DELETE.
  audit_column = > NULL);
  END;
  /
  
  What is I have several tables of several users and object_schema in handler_schema.
  
  I hope I'm able to clear my question, doubts please let me know.
  
  Best regards, Imran

  Hello

  object_schema - the schema of the object to be audited. (If the value is NULL, the schema of the current user is supposed).
  in case if you want to audit for multiple users - then make a test taking a value null and test access important tables - where relevant audit records are generated according to your requirement or not. I have not tested... try it

  -Pavan Kumar N

• Multiplication of the columns in the table and displays the result

  Hello Experts!
  With the help of Jdeveloper 11 g Release 1:
  I have a situation where I have a two tables showing the relationship of the master / detail. Now the main table shows the available quantity and the unit price and will then multiply to show the total price.
  The Details table does the same thing but has an additional column (added manually) with another text entry that requires the 'quantity' and then I need the total price with this value as well. So overall, the user has the option to select a quantity that is less than or equal to the quantity available (from the main table) and then to calculate the new total price based on user input.
  How can I go about it?
  All of the suggestions! ?
  s =

  I apologize in advance if this does not work for you, but here's my point of view.

  (1) add QtyDesired as a transitional editable column with a set of expressions Qty.
  (2) make your transitional column TOTALCOST an expression of QtyDesired * UNITPRICE.
  (3) according to how your page is set up, your QtyDesired may need to raise a contextual event. Otherwise, it might be enough to assign partial release of your TotalCost your column QtyDesired column to allow a partial page refresh. I do something similar by editing the line of my table in a popup, and then when the dialog box closes, it refreshes the table with the new values.

  Hope that helps. Just throwing some ideas out there. AutoSubmit and partial triggers seem to trouble many of my problems of refresh.