Tables do not align at the top of the text block

Similar Questions

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Text wrapping will not be in the text block

  I am changing the content on a block of text in Illustrator using a JavaScript file.

  My method is as follows:

  changeLayer = doc.layers.getByName(textKeys[t]);

  changeLayer.textFrames.getByName(textKeys[t]).wrapInside = true;

  changeLayer.textFrames.getByName(textKeys[t]).contents = textArray [textKeys [t]];

  Basically, I set wrapInside to true and then I replace the content of the block of text with a string.

  However, rather than the text as you wish, Illustrator print everything on one line expands the size of the text block (and sleep) to adapt the text on a single line. Even when I put explicitly the width and height of the image in the script, it shrinks the text to fit on a single line in the rather enveloping framework. If I explicitly set the size of the police he then extends the framework once again, but only on a single line. Any ideas? Thanks in advance.

  Good evening

  Don't forget that you have different types of linked text frames. In vba, you can find the property THAT allow you to show that read only 3 types of text frames aiAtraText, aiPathText and aiPointText

  Patrice

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• Master Page does not work for the text block

  What I am doing wrong?

  I create a master page.

  It's a given size, 6 X 9

  It has a margin.

  It has a text box with a heading for chapter headings.

  So far so good.

  At least I have substitute her in the following pages, it seems fine.

  However.

  I want a footer (for page numbers) so that I place a footer on the bottom.  Let's say it's an inch of height.  Right now it has nothing in it.

  I want a block of text that falls between the header and the footer, so I can run inside without having it encroach on header or footer.

  The header seems protected.  But.

  No matter how much I try and do all that I do, "foot" does not appear on the following pages.  Nor does the text box.  The header area is "taken", but the rest of the page is at stake.  Not "foot".

  Help, please.  It's driving me crazy.

  Thank you.

  Thanks, Willi.  I thought about it.  Sometimes I'm so tired of banging my fool head against a wall.  I wanted to have coherent text blocks in my pages.  I didn't think I didn't NEED them.  The footer has appeared in the following pages as soon as I put SOMETHING in the chassis.  A variable.  When it is empty, the space is considered as unoccupied.  Duhhhh.  Time to go to sleep!

• Some content of cells are not aligned at the top of the cell

  I tried to get a simple table with 3 cells to align correctly. In the first cell is a vimeo video, text with an image in two cells.

  The video is aligned correctly, and the other two cells are not.

  I would really appreciate any help you can give me.

  Here is the code for the table and the image of what it produces. Below that is the CSS code for blogholder and cellborder styles. Really simple things, but I can't understand why he does not align correctly. I'm inexperienced in trying to implement a video vimeo.

  Thanks in advance for clues to what is in my way.

  

  CODE:

  < div class = "blogholder" >
  < table width = "918" border = "0" cellpadding = "10" >
  < tr valign = "top" >
  < td colspan = "3" > < hr / > < table >
  < /tr >
  < b >
  "< td width ="300"height ="306"align ="left"> < iframe src ="http://player.vimeo.com/video/57555762"width ="280"height ="282"frameborder ="0"> < / iframe > < table >"
  
  < td width = "280" align = "top" valign = "top" class = "cellborder" >
  "< img src="Images/HomePage/dd-mandala.png "alt ="Logo of office of David"width ="108"height ="101"/ >
  Office of David strong > < p > < < / strong > < / p >
  < p align = "left" > < em > < strong > #69 Zombie Apocalypse < facilities > < /em > < br / >
  < strong > by David Spangler < facilities > < / p >
  < p > having had several years where the vampires were the cultural day monster, it now seems that the zombies have their turn. "Books, games, TV shows and zombie movies are multiplying... < a href ="http://lorian.org/davidspage.html#gpm1_2 "> < br / > < u > read more < /u > < /a > < /p > < table >"
  
  < td width = "300" align = "top" valign = "top" class = "cellborder" > < strong > < img src = "blog - mandala2.jpg ' alt ="Blog by Tomas Mandala"width ="100"height ="100"class ="textwrap"/ > John < facilities > community views
  
  < p align = "center" > < em > < strong > #69 Zombie Apocalypse < facilities > < /em > < br / >
  < strong > by David Spangler < facilities > < / p >

  < p align = "left" > after having had several years where the vampires were the cultural day monster, it now seems that the zombies have their turn. "Books, games, TV shows and zombie movies are multiplying... < a href ="http://lorianblog.wordpress.com/">."
  < u > read more / < u > < /a > < /p > < table >
  < /tr >
  
  < tr align = "center" valign = "top" >
  < td colspan = "3" > < hr / > < table >
  < /tr >
  < /table >
  < / div >

  CSS CODE:

  {.blogholder}

  border-left-style: none;

  border-left-color: #FFFFFF;

  padding: 10px;

  vertical-align: top;

  border-top-style: none;

  border-right-style: none;

  border-bottom-style: none;

  border-bottom-color: #FFFFFF;

  border-right-color: #FFFFFF;

  border-bottom-color: #FFFFFF;

  }

  {.cellborder}

  border-left-width: thin;

  border-left-style: solid;

  border-left-color: #000000;

  }

  Found the problem. You have the below css defined in the head section of the page. He said: align the content of the base line, which is what he does!

  TD, th {}

  vertical-align: baseline;

  }

• WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  Hi, we get this error in an independent ADR on Grizzly implemented.

  August 14, 2014 09:59:05

  oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or a table has not been found in the schema:

  APEX_LISTENER

  Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

  internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  defaults.xml "XXXXX" designate removed for safety, front of post

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

  < key "cache.caching entry" = > false < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < key = "cache.duration entry" > days < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.type entry" > lru < / entry >

  < key = "db.hostname entry" > XXXXXXXXX < / entry >

  < key = "db.password entry" > XXXXXXXXXXX < / entry >

  < key = "db.port entry" > XXXX < / entry >

  < key "db.sid entry" = > XXXXXX < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < key "log.logging entry" = > false < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < key = "misc.compress" / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key "misc.enableOldFOP entry" = > true < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < / properties >

  Complete log

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: NOTE:

  Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

  August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

  August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

  August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u00/home/oracle/ords/ords

  Configuration properties for: apex

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = XXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_PUBLIC_USER

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

  August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

  INFO: Oracle REMAINS initialized data Services

  Version of REST Data Services Oracle: 2.0.8.163.10.40

  The Oracle Data Services REST server info: Grizzly/1.9.49

  August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

  INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

  August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

  INFO: http://localhost: 8080/ADR / began to.

  Configuration properties for: apex_al

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = BXXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_LISTENER

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

  at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

  at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

  at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

  at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

  at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

  at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

  at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

  at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

  at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

  to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

  to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

  ... more than 33

  DBA has forgotten to run apex_rest_config.sql Doh!

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• Table header row gets cut off from view when the text block is resized

  I'm designing a table that has a header row, 6 body rows and 5 columns. I want the header skewed to 20º and rotation type of needles from the same angle. Knows someone who worked with tables, it is not possible to rotate the text to this value via the parameters of the cell, but the job is to split the table into two blocks of text. The lower sash will be the body lines, but the Executive must have the header where it gets skewed to the specified angle. The text must be created in separate and then cut and paste frames in each column header and then it can be rotated.

  The problem I have is when I try to drag the bottom of the text block to the top while the header remains visible, the header gets cropped view. The only way to prevent it from is Cup is I leave the first line in the frame, but then it gets skewed is not what I want. It seems that the block of text ignores the header still exists. The screenshot below has two tables. The top version is the one that I want to apply the effect to. The bottom has the effect, but his top line is a line of body (not a header).

  

  I don't think that it is possible to have a heading row without at least a body line in the framework...

• alignment of the text in landscape mode domestic xperia

  I installed xperia home 8.1.A.0.8 (later for me, not preinstalled with lollipop 5.1.1 so far no update of 8.0.A.1.2) pitcher my Z3, but mode landscape, there is problem with the alignment of text (or envelope). text (app name) is covered by another icon of app´s.

  

  

  The cause for the missing items, sometimes at a Xperia has been found and it will be corrected in a future update to the phone. Thank you for providing us with the newspapers and the video!

  Is the alignment of the text always like this or is it when the search and menu items are missing?

• Need help with the alignment of the text

  I don't know the answer to this question is simple, especially since I have no chance of finding the same question asked previously.  I want middle align text so that it is centered between the top and bottom of the box / text field created using the "text" tool  Frame on the left is simple: I just click on the button "align left" on the text panel.  There is no button to the top, in the Middle, or align at bottom.  In fact, when I'm done with this question, I'll go ahead and present it as a new idea!

  I also need to do the same with the text I add the vertical menu widget (menu manual buttons)... If there is a big difference in the way in which this is done, please let me know.

  Here is an example of what I'm willing to do.  Yes - the bottom image is a composite, then please ignore the spaces at the beginning of the text.  I also wanted to "align middle" instead of "align center".

  

  Thank you!

  If you want to center align text vertically, use top padding spacing Panel and change the desired number of pixel values (depending on the size of the text block).

  Also, you can use whole pixel values absolute for all major (i.e. 16 px) values rather than the values of percentage (120%) that are managed differently in different browsers.

  Here's a screenshot of the sample with settings that worked for me in my case where the text appears to be centered in all major browsers.

  

  You can also watch follows her thread that should answer most of your vertical alignment related research.

  http://forums.Adobe.com/thread/996101

  Thank you

  Vinayak

• Wrong with the alignment of the text because of the Bounding Box (SC6)

  I'm fighting to properly align the text because the selection boxes are not centered around the text.  Why, when I try to align on another object, it is turned off.  I use CS 6 and, as a general rule, the point tool and type.  I have read other forums that suggest that it could be the type of policy (which perhaps they are 'bad' fonts), but apparently not any type of police I use.  The framework encompassing always has extra space under the text, even when you use a very standard font such as Times New Roman.  Anyone can shed some light on this?  Thank you very much!

  Sarah

  Sarah,

  1. in the preferences, select "use Preview Bounds."

  2. Select the text you want to align.

  3. go to effect > path > describe the object.

  4. align

  Peter

• pictures page Firefox does not only show the text and links

  New office (not this one) with windows 8.1 Pro, 29 of Firefox, Norton Internet security. When I go to a lot of these images of pages of Firefox are not displayed, only the text and links. This is true for the addons page of 'get '. I can search for Add-ons, but when I try to install one, the installation fails. Will there be a security setting in windows or NIS blocking facilities as well as images of Firefox? Installing Firefox went well without error. Other sites do not have this problem.

  Another user has reported that this was due to a problem of time system. In particular, the date and time is correct, but day was set a day earlier. You can see that?

  Cannot open the view youtube. The plug-in module did open in simplified display only some images. Why?

• Change the alignment of the text in the Center.

  FO some reason, the forum search returns 0 results for me no matter what I enter.  I'm sure this has been asked before, but how to change the alignment of the text of point to Center?

  Even if it's at a point, he treated the same as text in the box. The following books

  var docRef = app.activeDocument;
  
  var textRef = docRef.textFrames[0];
  
  //textRef.textRange.characterAttributes.size = 28;
  
  var paraAttr_0 = textRef.paragraphs[0].paragraphAttributes;
  
  paraAttr_0.justification = Justification.CENTER;