Table header row gets cut off from view when the text block is resized

Similar Questions

• Text to be cut off from buttons

  Would be grateful for any help anyone can offer.  Have created a drop-down list (create a MovieClip and then inside to create the drop down on the next section) everything is great, until the appeared as a movie when the text gets cut off and then at the end.  I tried what actually more small etc, but not joy.  Any notice received with gratitude. I thank you in anticipation Ani.

  

  If the text fields was created manually and then simply increase its width manually... sometimes the size of the text change a little bit the runtime...

• Cursor images are cut off 20%-80% of the height, has been very good in 34

  On our Web site, we have a slider with about 10 images that have always worked. Now, users who have installed the update of Firefox to 35.01 cannot see the full images. Instead, some images are cut off 20%-80% of the way down on the cursor, while others are intact and completely visible. Image size/type has no effect.

  Everyone knows this?

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• I can't get my Powerpoint to view through the projector. It only shows my office.

  I can't get my Powerpoint to view through the projector. It only shows the desktop image and not my slides.

  You have mirrored screen checked? If this isn't the case, you must drag the PowerPoint window on the desktop appears on the projector.

• White screen when resume from hibernation when the graph is active (DM4)

  I configured and purchased a HP DM4t with 512MB ATI Mobility Radeon (TM) HD 5450 switchable graphicst.  My problem is that when the laptop goes to sleep (for example when I close the lid), it will sleep for a while (I think his suffering at 6 p.m.), after which she'll take back and hibernate itself (hybrid sleep option).  I like this feature because it allows to save battery power, however, when I try to resume from hibernation when the ATI Radeon graphics card is active, all I get is a black screen.  I can connect using the fingerprint reader, (I hear Windows making the connected to the carillon), but I don't see anything on my screen.  If I do this same scenario using the Intel graphics card, I will not have this problem.

  I called HP tech support and their solution was to disable hybrid sleep feature.  I was not satisfied with this solution, because it does not save the battery of the laptop must sleep for a long time.  My solution is to disable auto graphics card change, and I just go to the ATI Radeon manually if necessary.  The problem with my solution is that it forces me to remember to turn off the discrete graphics when I'm actually (I tend to forget).

  Is there a solution to this problem that will allow me to use the gfx ATI card AND the hybrid auto sleep function?

  I was finally able to update ATI graphics driver on my laptop.  This seems to have solved my out of the hibernation problem.  The version of the driver that I'm on is 8.741.1.1000 with a date of version of 21/06/2010.

• Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

  I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

  Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• How to get the text block, given anchor (~ a)

  I need to dynamically position anchored with anchor text blocks (but the relative position will be different for each anchor). If I grep ~ i can get the anchor marker - how to get the text block once I got this marker?

  Thank you

  The marker "anchor" is a character of "simple".

  So you can do the following if you have identified the character (and in this example selected it):

  //Start with an "Anchor Marker" selected:
  var myCharacter = app.selection[0];
  
  if (myCharacter.texts[0].textFrames.length == 1){
  
  var myAnchoredTextFrame = myCharacter.texts[0].textFrames[0];
      //do something with the anchored text frame:
      myAnchoredTextFrame.fillColor = "Yellow";
  
      };
  

  You can set the myCharacter variable differently, if you know the index of the character according to his history of parent.

  Or if you have found the character as part of a search GREP or TEXT by ExtendScript (JavaScript).

  Uwe

• How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  You must change your page design if the link does not occupy the full screen of your content.

  Neil

• How can I get audio to not start when the button is clicked?

  I am new to adding audio to slides, buttons, click boxes.  Import the recorded voice on the overall slide of files sounds easy enough.  However, there are several buttons that display a legend I want audio to not start when the button is clicked.  I added audio just for this button, but it starts when the slide begins.

  How can I get audio to not start when the button is clicked?

  Hello

  Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.

  Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to make a table header row to repeat when the table extends to another page?

  I have a table that breaks (spans) on another page.  I want that line of table headers to repeat (as in Word).

  If the header line is a true header row, it repeats automatically.

  To add a header row:

  1. On the table menu, select add rows or columns.
  2. Select Add 1 rank.
  3. Select this option for the title.
  4. Click on Add.
  5. Remove the false header line.

• White space removed while the text is cut off from its position

  Hello

  I am facing a problem in InDesign CS4 or later demand.

  I have a text like:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  {{1 AQ}}because these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  When I cut the text {{AQ 1}} of the paragraph, the space before the text is deleted and becomes as below:

  "The physical state in which a polymer may exist can be idealized by first examining a string of very long, regular polymer. .

  The reasonis that these properties are dominated by the extreme length and chain - like structure of these molecules and not by their actual chemical composition. »

  Can I get any solution for this problem.

  Thank you

  Gopal

  In text preferences, check that this preference is turned on: adjust space automatically when cutting and pasting words.

• Get specific information from executives of related texts

  Hi all

  So here's my question. I need to get information from text within a thick layer. The layer contains images and text and the text is the information that I need, which looks like this:

  (4) L attest 1,2,3,4

  (13) XL 5,7,8,9,10,11,12,14,15,17,19,20,21 bolt torque

  (4) bolt torque 22,23,25,27 XXL

  (1) XXXL 34 bolt torque

  I need to do three things: the number that represents the number inside the parenthesis, the size that it is the next set of letters (L, XL, XXL, XXXL) and the list of numbers (I need not "# s" characters), and information storage together to know for example that size L has a 4 number and numbers are 1,2,3 and 4.

  If someone could point me in a direction to achieve this I would really appreciate it. I'm working on CS6.

  Thank you.

  This is not EXACTLY how I described above... but this is the one I tested with. It doesn't have the conditional statement about whether she should use asterisks or peren and me have just pre-programmed the chain of the textFrame. It worked for me. It will be perhaps more useful than this wall of text and attempts at explanations...

  function getRoster()
  {
      var roster = {};
  
      var text = "(4) AL #'s 1,2,3,4\
      (13) AXL #'s 5,7,8,9,10,11,12,14,15,17,19,20,21\
      (4) AXXL #'s 22,23,25,27\
      (1) AXXXL #'s 34\
       \
      TOTAL: 22"
  
      var lines = text.split('\n');
  
      roster["sizes"] = {};
  
      for(var a=0;a5 && lines[a].indexOf(":") == -1)
          {
              var qty = lines[a].substring(lines[a].indexOf("(")+1, lines[a].indexOf(") "));
              var size = lines[a].substring(lines[a].indexOf(") ")+2, lines[a].indexOf(" #"));
              var nums = lines[a].substring(lines[a].indexOf("s ") + 2, lines[a].length);
              nums = nums.split(",");
  
              roster["sizes"][size] = {};
              roster["sizes"][size]["quantity"] = qty;
              roster["sizes"][size]["numbers"] = nums;
          }
      }
      return roster;
  }
  var theRoster = getRoster();
  

  This script returns the next object and saves it under theRoster:

  var theRoster = {
       "sizes" : {
            "AL" : {
                 "numbers": ["1", "2", "3", "4"],
                 "quantity" : 4
            },
            "AXL" : {
                 "numbers":["5","7","8","9","10","11","12","14","15","17","19","20","21"],
                 "quantity" : 13
            },
            "AXXL" : {
                 "numbers": ["22","23","25","27"],
                 "quantity" : 4
            },
            "AXXXL" : {
                "numbers" : ["34"],
                 "quantity" : 1
            }
       }
  

• How to make your table force widths to the width of the text block?

  Hello

  Is there a way to save a lot of time by forcing the tables to redistribute the column widths (by percentage or otherwise) depending on the size of the text box?

  Currently, we resize each column individually.

  See you soon

  Ben

  If your table is on a single page, you can enter the lower right corner (with the type tool selected) to resize all the columns proportionally. (you will see a two-headed diagonal area when you are on the right place to catch)

• defining the development from stage to the text field

  I am writing a program that asks that a user enters a word in a text field that appears when a button is pressed. Text entry is then compared to an array of words. It works fine, however if the step .ciblent going from the stage to the text field so that there will be a ready blinking cursor in text box o receive the contribution of the users, the input Word will not be considered against the table. The program will not work. the mytextfield.focus works to the point where the cursor is in the field of the tet and receives text etc. but it and says that the word is not in the table. It fails to check it properly. IM 3 days trying to sort and the only way it works is that if the user has to click in the box which is what I don't want. Also is there a way to show the white background textfield without having an error on this subject?

  You are welcome, please mark the thread answered if you have what you need.

  Good luck!