Tables with text boxes

Hi I'm new to Flash and trying to output number, I put in the text boxes with a button.

My code so far:

var myArray: Array = new Array();


myArray.push(Number(textbox1.text))
myArray.push(Number(textbox2.text))
myArray.push(Number(textbox3.text))

button1.addEventListener(
  MouseEvent.MOUSE_UP,
  function(evt:MouseEvent):void {
    trace(myArray);
  }
);

I did 3 text boxes and a button, I run the present, and when I've entered information in these text boxes and click the poster 0,0,0 as it does not read the numbers that I entered in the text box.

Any thoughts?

Thank you in advance x

A table will be fine if you need a place to store the values, but you must wait until the text boxes have values.  You can create in your button code, assuming that the button gets clicked after entries are made...

var MonTableau: Array = new Array();
  
function mUp(evt:MouseEvent):void {}

myArray.push (Number (textbox1.text));
myArray.push (Number (textbox2.text));
myArray.push (Number (textbox3.text));
trace (myArray);
}

Button1.addEventListener (MouseEvent.MOUSE_UP, mUp);

Another way, you could do this is to add event listeners to the extfields.  If you add an Event Listener. CHANGE you can have the same function used for all three textfields...

var MonTableau: Array;

function addToArray(evt:Event):void {}

myArray = [];

myArray.push (Number (textbox1.text));
myArray.push (Number (textbox2.text));
myArray.push (Number (textbox3.text));

}

textBox1.addEventListener (Event.CHANGE, addToArray);

TextBox2.addEventListener (Event.CHANGE, addToArray);

TextBox3.addEventListener (Event.CHANGE, addToArray);

function mUp(evt:MouseEvent):void {}

trace (myArray);
}

Button1.addEventListener (MouseEvent.MOUSE_UP, mUp);

Tags: Adobe Animate

Similar Questions

  • Please help with text boxes

    Can someone help me wit hmy problem. I have a Fisher with plenty of tables in it, some cells of the table are text boxes, or at least they were when I developed it. Now I need to modify some cells and for some reason I can't do because the cell is not a text box, but became (untitled < draw >) I can't change its return type to the text. Can someone advise what to do whitouh retype the text again in the new cell.

    Thanks in advance

    Hello

    Looks like the cell has lost its identity. I'd be inclined to objects in the name that you develop the form because it makes the script easier and less likely for LC/Acrobat to become confused.

    All I can suggest is that you select a good cell and then click the XML Source tab select the 'good' XML from ... to... . Then paste this in the XML for the damaged cell.

    Word of warning, tinkering in the XML Source tab can severely hurt your form - work on a preliminary version!

    If it works, rename each object (certainly within lines) to unique names.

    Good luck

    N.

  • Is it possible to create a form with text boxes of "adjustment" to the participants to answer the questions?

    Is it possible to create a form with text boxes of "adjustment" to the participants to answer the questions? Questions are open to everyone, so asking narrative responses.

    Hi landon39843319,

    You can have fields flowing / more dynamic in a PDF of LiveCycle Designer form, but not in an AcroForm (only created in Acrobat).  LiveCycle Designer is a program completely separated used for are delivered with each purchase Acrobat Acrobat XI has been release.  Now you must buy separately.  But LiveCycle Designer PDF forms are wrapped in a shell of PDF so that they will be displayed and can be filled in the free Acrobat Reader DC and earlier versions.

    If you do this in Acrobat with an AcroForm, you have as much information typed into a field that the user wants, but he's going to show everything on the screen.  Displays only the text that fits into the field, then a + sign will appear in the field to indicate that there is more text in this field, you can scroll down to read.  You can also set the automatic font size so that as more text is entered in the police becoming smaller and smaller to adjust the text, but that is usually not desirable for many forms.

    Hope this helps,

    Dimitri

    WindJack Solutions

    www.pdfscripting.com

  • Annoying problem with text boxes

    I want to create a text box with the white fill color and black text. The entire box is an opacity of 0% in normal mode and in overturning it would be 64%. Everything works correctly if the text font is Helvetica for example. But if it's Chin (what I want) it does not at all. The box is an opacity of 100% in all modes. Then I turn it on in Helvetica and it works very well... again. No other changes (!) Now, I really want to know what is happening with that.

    Corbel is a web font or a font for the Web. This is why it must be converted into an image when released.

  • Script with text boxes that must be compiled together

    Hello guys, I am new in the Adobe community. I do a jsx file to obtain their diploma.

    To complete this file, it must perform an operation such as the html file shown below:

    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
 <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
 <head>
  <title></title>
<script language="JavaScript" type="text/javascript">
/*<![CDATA[*/
 function Repeat(source,target){
 source.form[target].value=source.value;
}
/*]]>*/
</script></head>
 <body>
<form >
<input type="text"  onkeyup="Repeat(this,'fred');"   onblur="Repeat(this,'fred');" />
<input name="fred" type="text"  />
</form>
</body>
 </html>

    With two text boxes in a jsx file, as follows, for Illustrator CS5:

    #target illustrator
//#targetengine session
 var ppage= app.documents.add(DocumentColorSpace.RGB,600,300);
 var area_1 = ppage.pathItems.rectangle( 250, 10, 200, 100);
 var content_1= ppage.textFrames.areaText(area_1);
 content_1.paragraphs.add("first");
 var area_2 = ppage.pathItems.rectangle( 250, 300, 200, 100);
 var content_2=  ppage.textFrames.areaText(area_2);
 content_2.paragraphs.add("second");

    Someone can / know help me?

    Thank you all!

    Any suggestion will be appreciated!

    (SORRY FOR THE BAD ENGLISH, I'M ITALIAN)

    Salve, devo realizzare UN file jsx, by the laurea.

    Per completare questo file, esso deve does one ' operation simile al html file posted by sotto:

    <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".

        " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD "> "

    " < html xmlns =" http://www.w3.org/1999/xhtml "XML: lang ="fr"lang ="fr"> ".

    < head >

    < title > < / title >

    < script language = "JavaScript" type = "text/javascript" >

    / * < ! [CDATA [* /]]

    function Repeat (source, target) {}

    source. Form [target]. Value = source. Value;

    }

    /*]]>*/

    < /script > < / head >

    < body >

    < form >

    < input type = "text" onkeyup = "Repeat (this, 'fred'); "onblur ="REPEAT (This, 'fred'); "/ >

    < input name = "fred" type = "text" / >

    < / make >

    < / body >

    < / html >

    Con due caselle di testo, come segue, by Illustrator CS5:

    #target illustrator

    #targetengine session

    pPage var = app.documents.add (DocumentColorSpace.RGB, 600, 300);

    var area_1 = ppage.pathItems.rectangle (250, 10, 200, 100);

    var content_1 = ppage.textFrames.areaText (area_1);

    content_1.paragraphs.Add ("First");

    var area_2 = ppage.pathItems.rectangle (250, 300, 200, 100);

    var content_2 = ppage.textFrames.areaText (area_2);

    content_2.paragraphs.Add ("second");

    Qualcuno Può / her help?

    Grazie infinite a tutti!

    Although I'm not CarlosCanto

    try adding these lines:

    var input = prompt("For both textareas","input");
content_1.contents = content_2.contents = input;

alert("done");

    (But I do not know if I understand you right.)

  • Master pages with text boxes

    Hey,.

    I would have thought it would be easy to find, but I can't seem to.

    I have a master page and you want to have an empty text box in the same place for a new page is created each time. When I do that on the master page, of course the text box is not on the newly created page, I must just be missing something?

    Do you use the master with the text block? What makes you think he isn't here?

    Text blocks master really designed to arise text, which replaces automatically. If you want to type or paste the text in there you need to override their first manually.

    Hold down the Shift-Ctrl/Cmd and click on the frame to substitute it.

  • Help with text boxes

    Can I have a text box in a form that could be developed to adapt the content and thus to push the rest of the form down and possibly on another page? If it's gibberish, sorry example, if, after the section: 'Equipment will be used' he could go line 1 or 2 pages, but the rest of the form must retain the format? that is, footers and all other notes below the expansion box and could continue to page numbers?

    Shaun

    Try the following steps to test...

    Copy the data file (expand.xml) to a folder
    Launch of LiveCycle Designer ARE and open the form ExpandField.pdf
    Select the range of "Data View" and right-click on "DataConnection.
    Select "properties of the connection.
    Click "next".
    Navigate to the location where you saved the file 'expand.xml'.
    Click on "Finish".

    In addition, confirm the following...

    File > form > overview > view Type > interactive form

    To display the form with the data, select the tab 'Preview PDF'

    Concerning

    Steve

  • Problem with text box on the Page Master application to other pages.

    I've done this before with success, but maybe I'm missing something and don't have the time to waste on this one there...

    I applied a text box to the master page. I applied the master page to all the other pages, but on each page, the text box will appear like this:

    Picture 1.png

    I can not type in the text box or select or something. I have a go back to the Page Master and the text box is a-okay.

    What I'm missing or doing wrong this time?

    Me once again and I have the solution!

    1. place the text boxes where you want on your Master.

    2. go in the 'Pages' Panel and highlight all the pages.

    3. in the "Pages" options of the sliding panel, choose "replace all Master Page items.

    Now, all your pages have a floating text box!

    See you soon!

    Mikey

  • RH2015 problem with text box placed remaining in Place on the Image

    Using RH2015 I find a text box placed over an image and set a trigger of the text in the content to the top of the image page to display / hide the (effect) positioned text box when you click on. The issue I see is that the text box is not positioned compared to the image on which are superimposed. Is the placement of a text box positioned compared to the outbreak, in this case, rather than the image you like? I use a reagent HTML5 output would therefore have a solution that would elapse from the position of the image and the changes in scale, remaining anchored.

    Hello

    What is the ultimate goal? Click on the image and see the text?

    I ask because there may be a better way to achieve the goal.

    Personally, I have never had anything but bad using positioned text boxes.

    See you soon... Rick

  • Mount the frame to the content with text box problem.

    Hello

    Even if the vertical justification of my text box is set to "low", the box adapts content to the top executives (all the time) when I 'fit frame to content'! It's really annoying. InDesign CS1 didn't do. Now I use CS3.

    Is there a way to fix this?


    Thank you!

    Chris.

    You're right, is not, but you can double-click on the handleon of high sizing in the center of the frame and it will crumble down.

  • Auto fill a table with text cell

    I'm a long-time FrameMaker user who starts to become familiar with InDesign (CS5.5). I have a question about tables.

    In FrameMaker, I create a table of 2 column 1 row style to create a formatted Note style. The cell on the left uses a paragraph style that contains the Note text: in the field auto-numbering format (see screenshot).

    fm_paragraph_designer.png

    In other words, when I add the table to a document, the text Note: is automatically added, formatted according to the paragraph style.

    I tried the following approach in InDesign:

    I created a new table style (column 2, 1 line)

    I created a style of cell to the cell to the left. This refers to a paragraph style with put it in place in bullets and numbering section.

    ID_paragraph_designer.png

    However, the text "Note:" does not automatically appear in the cell with the left hand, unless I get a letter, number or a character, what beats rather the object. I guess there is a way for InDesign to do what I want, but I just have not found? Pointers appreciated!

    Mark

    Peter Spier says:

    ..  a character style nested within the 1 space that applies color, custom underline and new type size and leading...

    No, attack will not work in this case; you need a bit of vertical offset to get the characters from the bottom of the 'box '. Other than that, it works just dandy, after changing the underlining and rule above up to what all right (values that work for you will be different from mine, because of other policies, the size and leader etc.):

  • Questions about tables in text boxes

    When I convert the text to a table, there is a small space between the text block and the table. I have two questions about this:

    1. Is it possible to remove this gap? I put the text block options set spacing to 0 and gutter to 0 and spacing of table before and after to 0.
    2. Is it possible to create a table that is not in a block of text, especially when converting text to a table?

    Attached is a few screenshots that I hope will be useful. In the first image, East of the limit of the framework text in magenta and the structure of the table is in light blue. The gap between the blue magenta and light vertical lines on the left, that's what I want to remove.

    Screen shot 2012-05-11 at 11.45.46 AM.pngScreen shot 2012-05-11 at 11.50.47 AM.pngScreen shot 2012-05-11 at 11.53.05 AM.png

    Tables are always in a text frame, and in fact, they are part of a paragraph, so I would check the assigned to this paragraph paragraph style and see if there is a left indent applied, or perhaps a paragraph alignment is set to something other than the left.

  • How do I Center tables with text centering them in the elements?

    OK, so this bug has been hesitant to my brain for a while. When I create a table and Center it, all the text inside the table also focus warrant (output and preview, but is not visible in the HTML editor), whatever the justification for cells, the cells will justify always as the table is justified.

    I have Robohelp ver.8

    In the editor

    p1.PNG

    Output

    p2.PNG

    See using RoboHelp 8 on my website.

    See www.grainge.org for creating tips and RoboHelp

    @petergrainge

  • Problems with text boxes appear in the browser as image files

    Instead of text, I can highlight, I get photo files on my site. . PNG to be exact. I'm not sure what I'm doing wrong in the muse. www.logicstreamnews.com is my site, it's getting close or ready, always ongoing. Any help would be great appreciated.

    It's because you are not web fonts, but the system that are displayed as an image online.

    When you use your font in muse, you have here the categories: web fonts, standard fonts, system fonts.

    Do not use the system more, if you want to have blocks of real text on the Web site.

  • Text boxes are available in iPhoto 9.6.1?

    I have not yet upgraded to El Capitan.  I'm saving up for a new MacBook Pro.  I did a last yer picture book, but could not fins out how to insert text boxes.  I want to make a family history book so you will have to put a text with images.

    Most themes book photo Photos allow to use text boxes.

    You do not separately add text boxes, you simply choose the page layout a layout with text boxes.

    A page where you want to add a text field, and then click the layout button and select a layout with a text field:

Maybe you are looking for