tablespace expdp 10g default ORA-31626 31633 - ORA ORA-06512 ORA-06512 ORA-01647
Hello
I have currently a database 10g running on a server, AIX, one of its tablespace (CTSPRODDOC) data files located in two places;
1 /doc/ctsproddoc.dbf
2 /image/ctsproddoc_01.dbf
As he tried to export the tablespace for help after a command;
Directory of cts/cts expdp = tablespaces dumpfile = CTSPRODDOC.dmp dmpdir1 = CTSPRODDOC
It fails with following error messages;
ORA-31626: there is no job
ORA-31633: could not create the main table 'CTSPRODDOC. SYS_EXPORT_TABLESPACE_05 ".
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
ORA-06512: at "SYS." "KUPV$ FT", line 863
ORA-01647: tablespace "CTSPRODDOC" is read-only, cannot allocate space inside
I was able to export a different tablespace with success of the same database to the same directory. But I'm unable to export CTSPRODDOC.
Can someone please advise.
Thank you
Hem
Hello
I suspect that the default tablesapce for the user of the CTS is CTSPRODDOC. You can change this something else? or do some export under a different name that has a different default tablespace?
See you soon,.
Harry
Tags: Database
Similar Questions
-
[10g XE] ORA-01652... Can I change the tablespace?
My apologies if the questions to ask to seem silly... I'm not used to manage a database; I'm really only familiar with a database query, but I XE (10g) installed on my local machine as my test environment, and I came across a problem today that I have not been able to understand yet on my own like...
There, I created a username for me to use, so I wasn't just connecting as sys all the time. (I hear this is a bad thing, but for a small test environment of XE, I don't know how important that is.) Earlier this morning, I tried to create a table such as selecting a remote (via a database link) when I got an ORA-01652 error. He said, 'impossible to extend segment by 1028 temp in the SYSTEM tablespace. I didn't know why he tried to use the SYSTEM tablespace, but I took a peek, and it turns out that all the tables I have create under my username gets stuck in the SYSTEM tablespace.
I did some research and found:
to create a tablespace, so I did that, it's 1 GB, but then I couldn't figure out how to make my username use always this tablespace.CREATE TABLESPACE mytbs1 DATAFILE '/u01/oracle/data/mytbs01.dbf' SIZE 500M EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO;
Also, I saw that I have a file temp.dbf, which is only 20 MB, and I wanted to make sure that my user name that was used as its temp tablespace, so I found this piece of code:
and tried to use it for my temp temp tablespace, but I got ORA-00922: missing or invalid option (with SET indicated that the problem).ALTER USER <user_account> SET TEMPORARY TABLESPACE <temp_tbsp>
In addition, moreover, if I find that 20 MB is not big enough for my temp space, how to extend that?
Thanks in advance!Hello
user11033437 wrote:
SYS@XE 09-23-2010 09:08:01> alter user myusername set temporary tablespace temp; alter user myusername set temporary tablespace temp * ERROR at line 1: ORA-00922: missing or invalid option
Search for the correct syntax in the SQL reference manual. (Lose 'SET').
Get used to using textbooks.
You can memorize the syntax for the commands and features that you use every day, but there's always a lot of things you do only from time to time. (You'll probably be creating or editing users only from time to time.) -
Need help with expdp to resolve ORA-39127: unexpected error of appeal
Hi all
My environment is--> Oracle 11 g Database Release 1 on Windows 2003 Server SP2
Requirement is-> data pump works must be completed without any error message.
I'm tryring to export a schema data pump
Command used-> expdp = directory = data_pump_dir dumpfile scott schemas = scorr.dmp version = 11.1.0.6.0
Export log show that details his completed by 2 error messages
;;;
Export: Release 11.1.0.6.0 - Production on Saturday, April 23, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
;;;
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
Return of FLAME activated automatically to preserve the integrity of the database.
Start "SYSTEM". "" SYS_EXPORT_SCHEMA_01 ": System / * schemas = scott directory = data_pump_dir dumpfile = scorr.dmp version = 11.1.0.6.0
Current estimation using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error of the call to export_string: = SYS. DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newBlock)
ORA-37111: unable to load the OLAP API shareable library: (the specified module cannot be found.
*)*
ORA-06512: at "SYS." DBMS_CUBE_EXP', line 205
ORA-06512: at "SYS." DBMS_CUBE_EXP', line 280
ORA-06512: at line 1
ORA-06512: at "SYS." Dbms_metadata", line 5980processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Object type SCHEMA_EXPORT/TABLE/TABLE processing
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Object type SCHEMA_EXPORT/TABLE/CONSTRAINT/treatment
Object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS of treatment
Object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS treatment
ORA-39127: unexpected error of the call to export_string: = SYS. DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newBlock)
ORA-37111: unable to load the OLAP API shareable library: (the specified module cannot be found.
)
ORA-06512: at "SYS." DBMS_CUBE_EXP', line 205
ORA-06512: at "SYS." DBMS_CUBE_EXP', line 280
ORA-06512: at line 1
ORA-06512: at "SYS." Dbms_metadata", line 5980
. . "exported"SCOTT" DEPT' 5,945 KB 4 rows
. . "exported"SCOTT" EMP' 14 ranks 8,585 KB
. . "exported"SCOTT" SALGRADE' 5,875 KB 5 rows
. . "exported"SCOTT" ACCTYPE_GL_MAS' 0 KB 0 rows
. . "exported"SCOTT" BONUS' 0Ko 0 rows
Main table 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 "properly load/unloaded
******************************************************************************
Empty the file system set. SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR. DMP
Work 'SYSTEM '. "" SYS_EXPORT_SCHEMA_01 " completed by 2 error (s) at 13:40:08
Please help me solve this problem.
Thank you
ShanPL see the solution in MOS Doc 852794.1 (schema EXPDP fails with ORA-39127 and ORA-37111)
HTH
Srini -
EXPDP fails with ORA-39125: worker unexpected fatal error in MAIN $
Hi friends,
Oracle 10.2.0.4.0 on Sun OS
Im trying to metadata_only using EXPDP export
Faced with the below error
ORA-39125: worker unexpected fatal worker error of $ MAIN. UNLOAD_METADATA when calling DBMS_METADATA. [FETCH_XML_CLOB]
ORA-31642: failure of the following SQL statement:
BEGIN "SYS." "DBMS_RULE_EXP_RULES." SCHEMA_CALLOUT (1,1,1, 10.02.00.04.00 "") END;
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 86
ORA-06512: at "SYS." Dbms_metadata", line 907
ORA-00942: table or view does not exist
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
ORA-06512: at "SYS." "MAIN $ WORKER", line 6307
--------------------------------------------------------------------------------
PL / SQL Call Stack
--------------------------------------------------------------------------------
the line object
serial number of handle
51bf5dc20 15032 SYS package body. MAIN $ WORKER
51bf5dc20 6372 SYS package body. MAIN $ WORKER
51bf5dc20 2396 SYS package body. MAIN $ WORKER
package body SYS 6944 51bf5dc20. MAIN $ WORKER
51bf5dc20 1314 SYS package body. MAIN $ WORKER
51c7e8650 anonymous block 2
====================================
Results:
I check the status of DBMS_RULE_EXP_RULES
STATUS OF OWNER OBJECT_TYPE OBJECT_NAME
--------------------------------------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
DBMS_RULE_EXP_RULES VALID PACKAGE BODY SYS
SYS DBMS_RULE_EXP_RULES PACKAGE AVAILABLE
DBMS_RULE_EXP_RULES PUBLIC SYNONYM VALID
Dbms_metadata & DBMS_SYS_ERROR packages are valid.
======================================================
Error in the alert:
The value of MAXTRANS parameter ignored (30).
kupprdp: master the DM00 process started with pid = 25, OS id = 6506
to run - SYS. KUPM$ MCP. HAND ('SYS_EXPORT_SCHEMA_01', 'SYS', ' KUPC$ C_1_20120908075037', ' KUPC$ S_1_20120908075037', 0);
kupprdp: work DW01 process began with worker id = 1, pid = 26, OS id = 6633
to run - SYS. WORKER OF $ MAIN. HAND ('SYS_EXPORT_SCHEMA_01', 'SYS');
When I check the trace file, find the error below
ORA-04063: package Ann body. "" COLLECTION "features the errors
But when I check the condition of the packaging, it is valid.
Thanks for your help
KSGSalvation;
ORA-04063: package Ann body. "" COLLECTION "features the errors
You can try to compile this object? If it gives the error which is error message?
Respect of
HELIOS -
Impdp deliver oracle 10g express - ORA-39002, 39070 29283, 06512 29283
Dear all,
I have the following problem, try to import a dump:
D:\COSMOS_BATCH_RUNNER\Automation_oracle\Scripts\IMPORT DMP > impdp ses17/ses17 di
rectory = DMPDIR dumpfile = ses17.dmp
Import: Release 10.2.0.1.0 - Production on Friday, November 26, 2010 09:45:10
Copyright (c) 2003, 2005, Oracle. All rights reserved.
ConnectΘ α: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORA-39002: invalid opΘration-> invalid operation
ORA-39070: opening of the impossible logfile-> could not open the log file
ORA-29283: invalid opΘration on the file-> invalid operation on file
ORA-06512: Α 'SYS. UTL_FILE", line 475
ORA-29283: invalid opΘration on the file
I created a DMPDIR and issued read and write right to ses17 of the user before importing the dump.
When I have a look at the security of the folder referenced by DMPDIR, I must also have read and write access to it. (in windows when I right click on the folder-> properties-> Security (reading and writing are crossed).)
No idea how to import the dump file?
Thanks in advance,
ThomasAre what OS you on.
On Windows server, it may be that the user cannot write to this directory because of the restrictions of the user.
The error is generated because he wants to write a log file to the location of the DIRECTORY.Check also if UTL_FILE_DIR includes the directory entry (post its value here)
Workaround solution:
-Move the file to another directory and work from there
-
expdp fails with ORA-31693 and ORA-01555
Hello
I use Oracle Database 10 g Enterprise Edition Release 10.2.0.4.0 - 64bi under hp - ux
I export the DB as follows:
password/expdp system.
Full = y.
dumpfile = backup_dir:expdp_$ ORACLE_SID.dmp.
logfile = backup_dir:expdp_$ ORACLE_SID.log.
exclude = statistics-
estimate statistics =.
flashback_time =-"TO_TIMESTAMP\ (\ ' $DATE_EXP\ ', \'YYYY-MM-DD HH24:MI:SS\'\) \" "
It has always worked well, but this morning I received an error message:
ORA-31693: Data Table object "DFE". "' TGV_CONTROLE ' failed to load/unload and being ignored because of the error:
ORA-02354: Error exporting/importing data
ORA-01555: snapshot too old: rollback segment number 1 with the name ' _SYSSMU1$ ' too small
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
ORA-06512: at "SYS." TIMESTAMP_TO_SCN', line 1
ORA-00604: an error has occurred at the SQL level recursive 3
ORA-08180: no snapshot found on the basis of time specified
no idea what that sometimes causes this error?
Thank youThe time that you specified is mapped to an invalid SCN, a SCN beyond the current retention policy used.
You can try more big parameter UNDO_RETENTION or flashback for the more recent time and start again. -
Transport of Tablespaces in 10g
Hello
I want to carry a complete database of one OS to the other. I can't use RMAN CONVERT DATABASE because the endian format are different. I do with expdp and impdp.
One of the most important restrictions is that I can't carry the system tablespace and it is obviuos according to the naturalness of this procedure.
The important question is... I want to keep everything for transport statistics. With the old export & import utility, we had a setting to control this problem but with Data Pump, I do not see a similar setting...
Thank youHello
By default the Datapump export records statistics. Extract from the book of public services , you can find this explanation:
STATISTICS This parameter is ignored because statistics are always saved for tables as part of a Data Pump export operation.
Otherwise, it is possible to export/import statistics using the DBMS_STATS package too:
http://download.Oracle.com/docs/CD/E11882_01/server.112/e16638/stats.htm#PFGRF94753
Hope this helps.
Best regards
Jean Valentine -
Recovery of the space in a file of data/tablespace in 10g
We have a tablespace of 30 GB, made up of 15 data files of 2 GB each. However, there are only 5 GB of data in the tables within this space of tables.
This occurred because the database kept growing (so the new data files have been added) until it was discovered that a single journal table occupied almost all the space. When this table was truncated, he left more space free, but "fragmented" across all 15 files given.
I'm trying to reclaim the space in the data files to be able to go back to the OS (there is no reason to keep more than 7-8GB to this tablespace).
From what I've read, the "alter table xxx move" command must relocate the tables to new segments to the 'before' of storage space, and then we should be able to delete the empty data in the end.
However, when I run this command on a test table, nothing appears to change everything.
I am running:
ALTER table AAFDTCRC move;
ALTER index RM. Regeneration of the PKAAFDTCRC;
exec dbms_stats.gather_table_stats (ownname = > 'RM', tabname = > 'AAFDTCRC', estimate_percent = > null, method_opt = > 'for all THE COLUMNS of SIZE AUTO', degree = > 6);
However, when I ask the dba_extents table, is to show the table always distributed in different data files. I use the "alter table" command incorrectly, or is the table dba_extents not up to date with new information?
Any help would be appreciated. Thank you!user11198894 wrote:
Measure sizes might be a problem. Looks like that the previous data files use a size smaller than those created after measure. And I have naven can't able to find much information about what "alter table... move" when a tablespace has more than one data file. Maybe it does work in this situation?You will not be able to reduce the number of files in a tablespace; so if that's your goal, you will need to create a new tablespace and move objects inside. In addition, you will not be able to avoid a performance impact, unless you use the dbms_redefinition package to move tables because the MOVE command makes the unavailable table and requires you to rebuild indexes.
There is a note that I wrote some time back - with a pointer to a helpfuil script - which gives you a few ideas of how Oracle behaves with management space with multiple files when you move objects: http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/
If you want to keep the same tablespace you can try something roughly like this:
Run my script to report on the current use of space
Reduce as much as possible all the files
Move objects more big are reaching the end of the files
Repeat as necessary to step 1
Concerning
Jonathan Lewis -
ORA-39070: unable to open the log file, while using expdp
Hello
Please notice why I get ORA-39070: unable to open the log file.
When you run the expdp against the default directory: the expdp DATA_PUMP_DIR is completed successfully.
-current direcory on the Linux file system:
-Create directory and grant of read/write on it$ pwd /log_files/oracle/cdl1
-Verify the existence of the directory:$ sqlplus sys/xxxx@cdl as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Wed Feb 22 16:36:01 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> create or replace directory EXPTEMPDIR as '/log_files/oracle/cdl1'; Directory created. SQL> grant read,write on directory EXPTEMPDIR to system; Grant succeeded.
Check for permission to write to the directory:QL> select * from dba_directories; OWNER DIRECTORY_ DIRECTORY_PATH ---------- ---------- -------------------------------------------------- ... SYS EXPTEMPDIR /log_files/oracle/cdl1 ...
-try to expdp:[/log_files/oracle/cdl1]$ touch 1 [/log_files/oracle/cdl1]$ ls -l total 0 -rw-r--r-- 1 oracle oinstall 0 Feb 22 16:38 1
expdp system/xxxx@cdl FULL=y DIRECTORY=EXPTEMPDIR dumpfile=expfull220212.dmp Export: Release 11.2.0.3.0 - Production on Wed Feb 22 16:38:33 2012 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39070: Unable to open the log file. <<<<<<<<======= ORA-29283: invalid file operation ORA-06512: at "SYS.UTL_FILE", line 536 ORA-29283: invalid file operation
Post pl OS details - it's an RAC instance?
Error ORA-39002 ORA-39070 ORA-29283 ORA-6512 when you use Export DataPump (EXPDP) [ID 1305166.1]
Export DataPump (EXPDP) triggers errors ORA-39002 ORA-39070 ORA-29283 ORA-6512 on RAC Instance [1317798.1 ID]HTH
Srini -
ORA-39065: error unexpected procedure master expdp.
Yesterday, I exported my schematics using the below command
nohup expdp x/x@ORADB DIRECTORY=DATA_PUMP_DIR DUMPFILE=schemabackup_xltcconv_14july2010.dmp logfile=schemabackup_xltcconv_14july2010.log SCHEMAS=CNVOPRO8,CNVOPRO4,CNVREFO3,CNVREFO5,CNVAPPO1,X11DBSECO,CNVAPPO3,CNVREFO4,CNVREFO2,CNVOPRO2,CNVREFO6,CNVAPPO8,CNVAPP1,XDBSECO,CNVAPPO2,CNVPPO6,CNVREFO7,CNVOPRO3,CNVOPRO5,CNVAPPO7,CNVOPRO7,CNVOPRO1,CNVAPPO4,CNVAPPO5,CNVREFO8,CNVREFO1,CNVOPRO6 &
ORA-39065: exception of unexpected master process in KUPC$ QUEUE_INT. PUT_STATUS
ORA-39079: unable to queue message DG, KUPC$ S_1_20100714231902, MCP, 7152, Y
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 86
ORA-06512: at "SYS." ' KUPC$ QUE_INT ', line 969
ORA-23603: enqueue interrupted due to the low GAS STREAMS
ORA-39097: Data Pump job encountered the error unexpected 39079
What could happen?user9131570 wrote:
Yesterday, I exported my schematics using the below commandnohup expdp x/x@ORADB DIRECTORY=DATA_PUMP_DIR DUMPFILE=schemabackup_xltcconv_14july2010.dmp logfile=schemabackup_xltcconv_14july2010.log SCHEMAS=CNVOPRO8,CNVOPRO4,CNVREFO3,CNVREFO5,CNVAPPO1,X11DBSECO,CNVAPPO3,CNVREFO4,CNVREFO2,CNVOPRO2,CNVREFO6,CNVAPPO8,CNVAPP1,XDBSECO,CNVAPPO2,CNVPPO6,CNVREFO7,CNVOPRO3,CNVOPRO5,CNVAPPO7,CNVOPRO7,CNVOPRO1,CNVAPPO4,CNVAPPO5,CNVREFO8,CNVREFO1,CNVOPRO6 &
ORA-39065: exception of unexpected master process in KUPC$ QUEUE_INT. PUT_STATUS
ORA-39079: unable to queue message DG, KUPC$ S_1_20100714231902, MCP, 7152, Y
ORA-06512: at "SYS." DBMS_SYS_ERROR', line 86
ORA-06512: at "SYS." ' KUPC$ QUE_INT ', line 969
ORA-23603: enqueue interrupted due to the low GAS STREAMS
ORA-39097: Data Pump job encountered the error unexpected 39079What could happen?
Check metalink note below:
* Expdp fails with ORA-39065, ORA-39078, ORA-23603 [ID 785104.1] *.
His average if you use 10g then increase sga_target else you use 11g memory_target increase also increase the streams_pool_size initialization parameter then try againPublished by: Alex on July 14, 2010 21:27
-
ORA - 29857:Domain index and objects secondary exists in Tablespace
Database: 10.2.0.4
OS: Windows
While dropping the tablespace, I'm getting ORA-29857.
I understand that I must remove indexes of area on the tablespace, and also to find secondary objects in this tablespace and drop them.
Please provide me with step by step troubleshooting (query) for this error.
Thank you
Alokdamorgan, one of our As Oracle answered this question even a couple of years. He is Director of Oracle ACE and Oracle self-taught over 12 years at the University level - http://www.morganslibrary.org/)
ORA-29857: domain indexes and/or secondary objects exist in the tablespace
As he hinted after the accurate results of the applications after using the name of your tablespace
SELECT * FROM v$version; SELECT COUNT(*) FROM dba_segments WHERE tablespace_name = 'yourTableSpaceNameHere'; DROP TABLESPACE yourTableSpaceNameHere INCLUDING CONTENTS AND DATAFILES;
This query will show you the objects
SELECT owner, segment_name, partition_name, segment_type, segment_subtype, relative_fno FROM dba_segments WHERE tablespace_name = ''yourTableSpaceNameHere'';
Those are the objects that you will lose if you drop the tablespace.
-
Hi all
I can't shrink a tablespace. I'm getting ORA-12916.
Here are the details
sys@ORA2 > select * from database_properties where property_name like ' % PERMANENT % ';
PROPERTY_NAME
------------------------------
NAME
-------------------------------------------------------------------------------------
DESCRIPTION
-------------------------------------------------------------------------------------
DEFAULT_PERMANENT_TABLESPACE
DEEPAK
Name of the tablespace permanent by default
sys@ORA2 > select extent_management in the dba_tablespaces where nom_tablespace = "USERS".
EXTENT_MAN
----------
LOCAL
sys@ORA2 > alter tablespace users shrink space;
alter tablespace users shrink space
*
ERROR on line 1:
ORA-12916: impossible to reduce permanent or dictionary managed tablespace
sys@ORA2 >
sys@ORA2 > view the compatible parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
compatible string 11.2.0.1
sys@ORA2 >
sys@ORA2 > select * from v version $;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
AMT for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
sys@ORA2 >
Please specify.
Thank you
Deepak
The explanation of the error posted by Aman (which you could have gotten for yourself) is quite explicit.
Rather than SHRINK TABLESPACE, you should RESIZE the underlying data files. You will not be able to resize below the HWM.
-
ORA-14313: value 'Limit' does not exist in the partition DATASET_OTHER
Hi friends,
OS: Linux
Database Version: 10.2.0.2.0
I wanted to add a partition to one of my partitioned table "mapping". Then when I tried to reverse the partitionwith the command below... I got the error ora-14313 code.
Command Used: ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other);
Please suggest what to do and what is the reason for this? coz of some other partition spilit command executed successfully.Error : ALTER TABLE MAPPING SPLIT PARTITION dataset_other VALUES ('CAP') INTO (PARTITION dataset_CAP TABLESPACE TBS_MAPPING_CAP, PARTITION dataset_other) * ORA-14313: Value 'CAP' does not exist in partition DATASET_OTHERERROR at line 1:
Concerning
UmeshUmesh Gupta wrote:
Here are a few recent records in table
select table_name,partition_name,tablespace_name,high_value,partition_position from USER_TAB_PARTITIONS order by partition_position TABLE_NAME PARTITION_NAME TABLESPACE_NAME HIGH_VALUE PARTITION_POSITION MAPPING DATASET_NAP TBS_MAPPING_NAP 'NAP' 379 MAPPING DATASET_MAP TBS_MAPPING_MAP 'MAP' 380 MAPPING DATASET_SAP TBS_MAPPING_SAP 'SAP' 381 MAPPING DATASET_OTHER TBS_MAPPING DEFAULT 382
Have you checked other values of 378 score very carefully. (Normally) you get the error message means that the value exists somewhere else already.
You could also point out the high_value_length, just in case where the high_value isn't really what it looks like (e.g. some backspaces hide certain content).Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
Author: core Oracle -
ORA-23621: Operation corresponding to the A054C12CF4BE8ECFE040A8C005022F script
Hello
I'm currently implementing an upgrade online from 32-bit/10r2.0.4-a 64-Bit/11R2.0.2.0-Environment on Redhat 5.4.
The 32-Bit/10R2.0.4 database is named STRM with strmadmin_src STREAMADMINISTRATOR
The 62-Bit/11R2.0.2 database is named STRM11 with the STREAMADMINISTRATOR strmadmin_tgt
According to the document in [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17069/ap_strmnt.htm#CIHGICAA] deciding if configure Oracle Streams directly or generate a Script
I always get the following error message:
where/home/oracle>sqlplus strmadmin_tgt/STRMADMIN@STRM11 SQL*Plus: Release 11.2.0.2.0 Production on Thu Apr 7 16:00:54 2011 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production With the Partitioning, Real Application Clusters, OLAP, Data Mining and Real Application Testing options SQL> DECLARE 2 empty_tbs DBMS_STREAMS_TABLESPACE_ADM.TABLESPACE_SET; 3 BEGIN 4 DBMS_STREAMS_ADM.PRE_INSTANTIATION_SETUP( 5 maintain_mode => 'GLOBAL', 6 tablespace_names => empty_tbs, 7 source_database => 'STRM', 8 destination_database => 'STRM11', 9 perform_actions => TRUE, 10 script_name => NULL, 11 script_directory_object => NULL, 12 capture_name => 'capture_strm11', 13 capture_queue_table => 'strmadmin_tgt.strm11_cqt', 14 capture_queue_name => 'strmadmin_tgt.strm11_cq', 15 apply_name => 'apply_strm11', 16 apply_queue_table => 'strmadmin_tgt.strm11_aqt', 17 apply_queue_name => 'strmadmin_tgt.strm11_aq', 18 bi_directional => FALSE, 19 include_ddl => TRUE, 20 start_processes => FALSE, 21 exclude_schemas => '*', 22 exclude_flags => DBMS_STREAMS_ADM.EXCLUDE_FLAGS_UNSUPPORTED + 23 DBMS_STREAMS_ADM.EXCLUDE_FLAGS_DML + 24 DBMS_STREAMS_ADM.EXCLUDE_FLAGS_DDL); 25 END; 26 / DECLARE * ERROR at line 1: ORA-23621: Operation corresponding to script A054C12CF4BE8ECFE040A8C005022F2A is in progress. ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86 ORA-06512: at "SYS.DBMS_STREAMS_MT", line 2607 ORA-06512: at "SYS.DBMS_STREAMS_MT", line 8163 ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 2876 ORA-06512: at line 4
What have I done wrong?create public database link STRM connect to STRMADMIN_SRC using 'STRM'; and -- Create the user create user STRMADMIN_TGT identified by "" default tablespace STRM_TS temporary tablespace TMP_STRM_TS profile DEFAULT password expire quota unlimited on strm_ts; -- Grant/Revoke object privileges grant execute on SYS.DBMS_AQ_BQVIEW to STRMADMIN_TGT; grant execute on SYS.DBMS_DATAPUMP to STRMADMIN_TGT; grant execute on SYS.DBMS_FLASHBACK to STRMADMIN_TGT; grant execute, read on directory SYS.OSC_ALERT_DIR to STRMADMIN_TGT with grant option; -- Grant/Revoke role privileges grant connect to STRMADMIN_TGT; grant datapump_exp_full_database to STRMADMIN_TGT; grant datapump_imp_full_database to STRMADMIN_TGT; grant dba to STRMADMIN_TGT; grant exp_full_database to STRMADMIN_TGT; grant imp_full_database to STRMADMIN_TGT; -- Grant/Revoke system privileges grant unlimited tablespace to STRMADMIN_TGT;
Help, please!
hqt200475(1) check the note bewlo how to create the strmadmin
Note: 786528.1 how to create STRMADMIN user and granting of privileges
Note: 259688,1 Grant streams user privileges to administrator using DBMS_STREAMS_AUTH packageconnect
/ @STRM1.NET as SYSDBA create user STRMADMIN identified by STRMADMIN;
ALTER USER STRMADMIN DEFAULT TABLESPACE USERS
TEMPORARY TEMP TABLESPACE
QUOTA UNLIMITED ON USERS;GRANT CONNECT, RESOURCE, s/n, AQ_ADMINISTRATOR_ROLE to STRMADMIN;
Run DBMS_STREAMS_AUTH. GRANT_ADMIN_PRIVILEGE ('STRMADMIN');
(2) see also
How to set up replication stream using DBMS_STREAMS_ADM. MAINTAIN_ * set of procedures [864973.1 ID]If the procedure is completed successfully, execution (see the example above of the output), then replication is and ready, if not, that the following views can be used to solve the problems:
DBA_RECOVERABLE_SCRIPT
Details on the operations of recoverable, shows the currently running script and the block that is running and the total number of blocks.DBA_RECOVERABLE_SCRIPT_PARAMS
Details of the recoverable operating parameters used to run the script.DBA_RECOVERABLE_SCRIPT_BLOCKS
Details about recoverable script blocks, shows more details on each block and exactly what tasks are achieved by running each blosk.DBA_RECOVERABLE_SCRIPT_ERRORS
Details showing errors during execution of the script, you can check to find more information about an error.Published by: user596799 on April 17, 2011 08:36
-
ORA-01652: unable to extend temp segment
Hello
Chat support told me that I need to connect this question here...
My cloud trial database service is running out of storage
ORA-01652: unable to extend segment temp of 128 in tablespace APEX_ #.
ORA-01653: unable to extend table YZJMXMYGKBNK. 128 in tablespace APEX_91669423895621749 CPC_STATEMENT
I have 15 tables:
Tablespace megabytes
CPC_CONFIG APEX_ # 0.06
CPC_CONTROL APEX_ # 0.06
CPC_DEBUG APEX_ # 10.00
CPC_EXTERNAL APEX_ # 0.81
CPC_INDEX APEX_ # 0.13
CPC_INPUTS APEX_ # 0.06
CPC_STATEMENT APEX_ # 2.00
CPC_STUDENT APEX_ # 0.06
CPC_STUDENT_PAY APEX_ # 0.06
CPC_STUDENT_STATEMENT APEX_ # 0.06
DEPT APEX_ # 0.06
EMP APEX_ # 0.06
PAYPAL_SESSION_MAP APEX_ # 0.06
PAYPAL_TRANSACTIONS APEX_ # 0.06
RETURN APEX_ # 0.06
How can I see what is using my storage?
Thank you
Steve
Thanks Shema informing me run: Purge Recyclebin;
My database is down to a low as 60 MB used.
Maybe you are looking for
-
problem syncing iCloud: Photos on Mac OS x, do not sync with the iPad, iPhone
I pay 200 GB of storage iCloud, available are still 139 GB. My photo library is 93,25 GB in size. While my two iPhone6 and my iPad seem to be reasonably in sync, the photo library on my MacBook Pro is anything but in phase: there is an inconsistency
-
Z330 randomly resets / accidents
So my phone restarts randomly. Sometimes during calls sometimes when using the app or just lying on my desk doing nothing. It's only 2 weeks. This would be a case for a replacement unit or is it a software error?
-
Hi all My acer 5749 flashed a blue screen while I was loading some film from a blue screen USB files is one of those blue screen of death but he went off so fast that I didn't have time to read. The laptop, then stop. I tried to restart and got a bla
-
How to erase a CD - R disc in drive D?
Hello I have files on a CD - R disc and erase the content. I insert in the D drive and it opens the files it contains, but I don't know how to clear this content. What should do? I hope I have the correct Windows themes shoes. Anne
-
PDF of Smartphones blackBerry torch open used files
Hi can you please help me. I want to open PDFs on my torch. the documents were donloaded to my laptop. Please help me by answering my email. Thank you. Frédéric.