Acer 5749 does not start

Similar Questions

• Acer laptop does not start after the blue screen

  After I got a blue screen (flashed by too fast to see the error message) when I try to reboot my acer 5610Z laptop computer with vista home edition, usually nothing happens at all. sometimes windows is trying to run the Startup Repair tool, then crashes and only a cursor flashing at a black screen.  Tried to open the case and clean the Fan & Heatsink heat to air without effect.

  The blue screen came a few days after I started using a new USB mouse, but the fan seemed to get high a few days earlier.

  But I noticed it will make the road to startup repair only if the battery is in, and never if only the power cord is attached.  Also, if I let the computer sit for several days, it is more likely start (even though he never passed from the Startup Repair).

  1. try the system restore.

  2. try to do a startup repair disk.

  3 acer Recovery Options.

  4. contact Acer.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Acer.com/worldwide/support/index.htm

  Support &

  See you soon.

  Mick Murphy - Microsoft partner

• Acer 8930G - does not start after the start screen

  Every afternoon, I have an Acer 8930 G, he knocks over a few years (approx. 7ish) and this is the first problem I have had with it. When I turn it on, the normal Acer screen looks and where it would normally load just Windows then off. Power exists that all the lights still work, and there is a white-ish light that looks like inside the base of the screen. I looked on the web and have tried the flashlight on the screen and also removal of battery / power supply cable and press the power button for a minute and reconstruction and try again, but nothing helped. I am able to get on the BIOS screen and it looked like the boot in position 1 device is the BD player, I moved this back to the hard drive but still the same thing... Anyone have any ideas on what could be the problem? Thank you very much in advance Ross

  If you have important data inside the HARD disk, I suggest you create a media DRIVE or a bootable CD Hiren boot cd .iso

  http://www.hirensbootcd.org/download/

  then boot from the serious media and choose mini-xp in the options, once in the Office search on your HARD drive and save your files on a USB key or external HARD drive.

• My ACER laptop will not start Vista

  My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to reinstall Vista on an Acer:

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• New Acer desktop PC does not start

  Original title: Please help! New Acer desktop PC does not start and the Acer Support is useless! 

  Have desktop Acer running Vista.  When turning the power on, screen stops at a black screen with "American Megatrends" and "press Delete to enter Setup or F12 for BBS Popup.  Bed features but cold stops at Auto detecting USB storage devices.  Have you tried typing Delete on startup and F12 also.  Also tried F8 and F10 control.  Nothing seems to work.  Sometimes when I hit Delete or F12 at the power, subsequently will pass on their corresponding monitors but it takes literally hours sometimes.  I downloaded a Vista Recovery of Neotech and tried to have the start of the DVD system, but obviously, it didn't work.  Had the same problems when I had to restart.  Please help had only 1 month, is going to launch windows soon!

  Hello

  You have serious hardware problems and need to file a complaint with Acer.

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• TC - 705 crashed. does not start. error message

  My sucks TC-705 crashed.  It does not start.  error message saying lack driver DVD player.  At the beginning I was not too worried because my recovery is on a USB key.  He went through the installation process, but the re-boot did it again.  Endless loop.  I tried all repair options without success.  I went to the command prompt and run the scan and repair.  Scanned very well, she could not make the repairs.  If nothing worked the hard drive may be damaged, said a source online.  I put a new disc in, but there was no improvement.

  Where should I go from here?

  Ironfly,

  I downloaded vanilla but after I extracted it I could not make heads or tails of it.  The Readme went on and on the forums running with it but not said me something about how to launch it.  I have a question on how to launch online, but the first statement, I had was to open my WOW file.  I knew then that I had wandered in some elses universe.  After reading more later, I realized that he was playing.

  All of this is moot right now because my DVD drive and all my usb ports are dead.  There is nowhere where ever I go except in the bios.

  At this point, I don't think that there is nothing I can do.  The computer is still under warranty and I have a one year protection plan so I'll let Newegg and Acer deal with reclamation.

  I wish I could give you a hundred Bravo for all your efforts.  Thank you and all those who participated.

  unktim

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• just installed sp3, xp does not start, gores in safe mode.

  I installed Windows XP pro sp3 today.  When I try to restart or start my acer aspire laptop Windows XP does not start and the computer goes to the safe mode screen

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• does not start the last bars of microsoft, PAGE_FAULT_IN_NONPAGED_AREA windows vista system

  Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:

  -bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)

  -tried to restart, all options on F8 does not.

  -No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)

  -recovery disk proven system of point of sale without success.

  -every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.

  -System is an ACER EX4630-4126

  -BSOD popped up all while surfing internet

  -is the new software installed spybot s & d

  -can not run memtest because it does not start up vista

  -tried running the memory diagnostic tool but it shut down on me before completing the diagnosis

  Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.

  Ainjel Hello,

  This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.

  You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:

  Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".

  http://support.Microsoft.com/kb/939720

  Do a restore from WinRE system:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards

  Savan Microsoft technical support.

• Keyboard Microsoft Wireless 1000 and a Microsoft wireless optical mouse 2000 - my computer does not start.

  Hello.

  I have Microsoft Wireless 1000 keyboard and an optical mouse wireless Microsoft 2000, they worked fine on my old computer with XP.

  Now, I bought an Acer Predator G3620 with Windows 7 and my computer does not start. He stops and beeps when it says "Press DEL to enter setup", this continues to the repeat. When I use the wired Acer keyboard and mouse the computer starts normally.

  When I inserted the original CD with the drivers, it gave an error of compatibility with this version of windows. So I downloaded the drivers and everything seemed fine. But when I start the computer (or reboot) I have to disconnect the transmitter/receiver or the computer stops and beeps.

  Once the computer is turned on, I can reconnect the transceiver, and it works fine.

  Find it me hard to believe that it has to bee like that.

  I have to buy a new keyboard and mouse?

  Brgs,

  Robert

  Go into the BIOS of the ACER and set it for legacy USB, USB mouse, USB keyboard, or along those lines...

  Then, go here for the drivers...

  http://www.Microsoft.com/hardware/en-us/downloads

• Newly purchased Dreamweaver does not start

  Hi, everyone, hope, will help here, as do not have access using Dreamweaver simply because it does not start... Just purchased the program yesterday and today installed with Photoshop, but Photoshop is correct and just showed Dreamweaver pop with the Preferences file and Windows has reported an error and closed Dreamweaver... Again he started later... Tried to uninstall and install again and it's always the same, what can I do? Really frustrated at that... and my laptop meets all the conditions...

  Have you looked in the Dreamweaver FAQ? There are here, both of which may help you:

  • CS4 installation issues
  • Dreamweaver crashes at startup

  If your computer is an Acer, the answer is in the second.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.