Tablet is dead. -Venue 11 Pro (7130). -Now what?

Similar Questions

• Venue 11 Pro 7130 w / vPro - rate issues

  This just started this weekend.  Of course, I had the unit for 10 days, so it could have been a problem before today and I noticed that just now.

  My 11 Pro coming loses so that connected battery life and charge it at night while he was off , gave a load of only 15%.  I use 24w charger provided with the original cable.  I have my Dell Power Manager Express load value.

  When I boot into the BIOS and click on battery with the plugged adapter information, he says it's an adapter of 3w.  It is obviously a problem.  I unplugged the adapter and plugged back into the micro-USB port.  He said then it is a 23w adapter and begins to load.  Large.  Until I realize that the '' correction '' lasts a few minutes, and my coming 11 Pro is to drain its battery while plugged in.

  Everyone knows this?  Can I have a defective BIOS? Faulty hardware?

  Well.  There is something wrong with the Mobo or port.  I tried a new charger with the same result - drains battery while that trendy, 24w adapter detected as 3w in the BIOS.  If I can't get Dell to a maintenance operation (unit refurb, apparently someone else still "owns" in the Dell documents), I'll have to send it back.

• Windows 10 build 9926 unusually heavy use of CPU on the venue Pro 7130 i3 11

  Define how the other owners of 11 Pro 7130 meeting places had good success in the management of the Windows 10 preview, I conducted today a place in upgraded from 8.1 to 10 build 9926 (the one with the Continuum, which is great), but I'm having the issue of constant between 50 and 99 percent high CPU load , with no guilty in the Task Manager. Before you go to format and do a clean install I wanted to ask if anyone knew this problem.

  EDIT: the unusually high load seems to be triggered by a process called Windows Driver Foundation - user, whose executable mode driver is wudfhost.exe.

  A complete reinstallation did not help.

  EDIT 2: If someone experience the problem, disable completely the service named "Windows Driver Foundation - user-mode driver framework" helped, with seemingly no ill effects, although after weird restarting it may need to be disabled later.

  As a warning, I note how in general, it is never a good idea to go mucking in services.msc.

  Some information about my experience with the Windows preview 10, the two pre - and after Cortana on a Dell coming Pro 11:

  1. Builds before the last Technical Preview 9926 looked much more like Windows 8.1
     1. They shared the same start menu and app store. It was almost like 8.1 with all it's bugs ironed out - and a few goodies in. Really worked well on my V11P.
  2. 9926 build adds many new features - but also adds tons of bugs.
     1. Look around the net and you will see common problems that are corroborated by many users of the technique of the preview. You will have to take the good with the bad.
  3. Upgrades (from 8.1 to 10) on-site are problematic - ESPECIALLY with the most recent Technical Preview 9926
     1. My installation of the latest version of Win10, migrate my settings 8.1 resulted in an installation with tons of questions. My Active stylus barely worked - sensor HID driver will fail to load and having problems. He would go to the mode standby and never go on low power, draining my battery. He had 100% fail still to wake up from its sleep - I would get a black screen that requires a hard shutdown and reboot. I also had the CPU usage very high with the WDF service. As mentioned above.
     2. Overall, a lot of things online really as you can imagine - and this is frankly not worth it to upgrade on site.

  So, with that said - what was the solution?

  New installation.

  Here are the steps to get the best Windows 10 installation on a coming 11 Pro (I know - in my experience).

  1. Download the version of ISO - installation of a USB disk with the utility in Rufus 
     1. Boot on it by pressing volume up several times during boot up until you get the boot menu. Then use volume up to move to the bottom of the list - low volume to select the highlight boot device.
     2. After the installation of the key USB - copy the most recent copy of Dell Wireless driver for your Intel/Dell Wireless card, a copy of 7-zip, and a copy of the latest Dell cabin Pack for the 7130 file in a directory on the USB drive (make one, name drivers or something).
  2. Install the Windows technical overview 10
     1. Delete all partitions on disk 0 (or whatever your SSD) until you have one unpartitioned space - and install it.
  3. When you first - start your screen will be slow/choppy as all hell!
     1. This is mainly due to the fact that there are very few compatible drivers cooked in Windows 10.
  4. Do not start to install the drivers from the Dell site - many will prove to be obsolete.
     1. Only install the drivers from Dell/Intel Wireless to obtain network connectivity and the internet
     2. Then install 7 - Zip and extract the CAB Driver Dell file in a directory on your C:\ called "C:\Dell.
  5. Now you have a network connection - start Windows Update
  
  
  1. Windows different Intel chipset - including video device drivers will begin to download.
  2. It will ask to reboot - let him.
• Now - if your tablet is something like mine - after it restarts, it will start flickering like hell.
  1. This is the video driver Intel panic hell. Tablet may hang - just persist through the pain and continue.
  2. I found mine to panic more with the help of the touchscreen - so I plugged a mouse.
  3. Mine has been fixed by disabling "Auto Refresh Panel" in the Intel graphics options menu (click Law Office, Graphics Options). This setting can be found under the section power options.
     1. Do it and restart. My flicker ceased thereafter.
• At this point - I expected and wanted things worked, but open Device Manager
  1. (Start menu - type "Device Manager") - or-(Start Menu-> Control Panel-> Device Manager)
  2. There was a last device without driver SM Bus controller. Click - Update right driver and point it to the directory of D:\Dell you have extracted the CAB file.
  3. It was't until what I installed the driver for the device that he would go to sleep properly connected.

Now - a word of warning. Unlike earlier versions of win 10 - my Eve connected sessions drain about 1, 500 MW/h. That's what I saw in 8.1 Win no matter what I tried - I wonder if there is some sort of driver problem - and replacement needs. My sleep study reports show some offenders - everything works for less than 1% of the sleep cycle, but the material is not a descendant to C3 to sleep, which is where the power drain is. Looks like a driver chipset of a certain type of malfunction - I'll do a trace and try to isolate the problem.

Apart from that-, all has been MUCH more stable. Sleep (although draining the battery) are coherent rock, I have the high utilization of the processor in the stronger WDF service, and the active stylus works exactly as it should.

I'll stop it between uses for now - and keep stable and see if there is a driver chipset or something that solves this problem.

• Games on a venue Pro 7130 11 8/256?

  I've taken over a 'exit - new' Pro 7130 coming 11 8/256 last week (dock keyboard and stylus too) and I'm crossing my fingers that there not any question that I saw posted here, especially in the 'Freeze' huge wire. If she has any questions I can do some troubleshooting, but probably will return it before my 30 days are up. I can't afford to be stuck with a defective Tablet this expensive and be unable to return.

  In any case, my world is perfect with a 11 place works perfectly, I would like to make some plays of light on it. I have a ton of available older games I've bought over the years on Steam, Humble Bundle, GOG, etc., which I think could run. For example, games like Baldur's Gate 2, Defense Grid, FTL, Kingdom Rush, etc.

  Recommendations for this table/CPU can manage well? I don't mind reducing the necessary resolutions game performance.

  Has anyone connected a X 360 controller? If so, the problems with him?

  I recently had the chance to try the same coming 11 Pro model and I can answer your questions for you safely. Intel HD 4200 of the vPro model isn't exactly hardcore gamer material but it will get the job done admirably well more often expect naturally. It is more than enough for one of the applications on the Store. It can also play several games of office before 2008 at the higher and somewhat more modern settings with medium or low settings. Referring to my own experience and that of other securities experienced, there is the series half-life series Jedi Knight, Star Wars Battlefront, Quake 4, Call of Duty 2 and Fear just to name a few.

  Some recent games like Civilization 5 cannot be read to quick, but without fear. They are still able to work with low settings very well. If you are unsure if a game will work, just look to see if the minimum specifications specify if it can be played on a Radeon X 1950 XT (sometimes referred to as "Radeon X 1950 series") or the Geforce 7900 GTX (sometimes referred to as "Geforce 7900 series"). The reason why both of these desktop graphics is more old cards about position until, or offer the same performance as the Intel HD 4200. In any case, your tablet will be able to make the deal if one does.

  I am pleased to say also that the Xbox 360 gamepad works well. As long as the game says that it supports a Xbox 360 controller, it will work on your Tablet coming 11 Pro.

• 11 pro 7130/7139 venue: 'windows 10 not supported on this device.

  

  on the dell support page place 11 pro 7130/139, a banner told me that "windows 10 operating system not supported on this device".

  I spent about 1600 euros less than a year ago... is one of the products high dell of the page on the store today... and I can't update windows 10?

  This is the way THAT DELL takes care of its customers...

  DELL, well done... ever... NEVER buy another dell in my life...

  We will post a BIOS updates and drivers for Win 10.   They aren't out yet.

• Venue 11 Pro BIOS / Intel Management Engine problems

  Hello

  Recently my Tablet Dell place 11 Pro 7130 (vPro) with Windows 8.1 x 64 has had problems applying power. He would have before start in 20 seconds or so, and now it may take a minute or more before you post what whatsoever.

  In the Device Manager Windows "Intel Management Engine Interface" shows an exclamation point and wrote:

  "The device cannot start. (Code 10)

  STATUS_DEVICE_POWER_FAILURE ".

  The research forums, I tried to update the drivers of the IME by using different versions. I tried to Dell website, as well as Intel. They all fail to install with the same error as above.

  Here are the most recent driver Dell tried support:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=PRRRC&FILEID=3339487189&OSC

  When I tried to Flash the BIOS of the A12 A13, it gives me no errors, loin very well until he decided to restart. After the reboot happens exactly as previously having never run the BIOS flash.

  I reached out to Dell support and they tried to install the same driver over and over again (about half a dozen times or more) before they me just reinstall my OS based on what forums suggest.

  So what I asked of them is a replacement motherboard, I get not anywhere, but I feel that it is all related to these problems:

  http://en.community.Dell.com/support-forums/mobile-devices/f/4586/t/19542362?pi239031352=4

  http://en.community.Dell.com/support-forums/mobile-devices/f/4586/t/19589473

  Can someone enlighten us more on this topic? I don't think a reinstallation of the operating system will solve this, and my current thoughts are I'm stuck without being able to Flash the BIOS thats why IME is bad mood against me.

  I'm not tense at this point, all hope based on the forums that I will get this tablet in good operating condition, and once the dell technical support suggested I ignore the error it lead me to believe that I'll buy a new Tablet 8 months in possession of it.

  Thank you.

  Unfortunately, you will need to return the unit to the deposit to this fixed.   Once a unit is in this State, it is not possible to update the BIOS via the customer facing tools.   Deposit use a special tool which allows to overcome and correct state.   Apologies for the inconvenience.   Note that the most recent BIOS version have fixed ME Intel which should avoid this problem again.

• Venue 8 Pro and Vidoe photos at the store on SDHC card instead of the hard disk

  Have a coming Pro 8 with 32 GB of storage and want to have pictures and video store on the SDHC card instead of the hard drive.  Is this possible and if so, how?

  Yes ok... I'm not too much the same. I take not compressed w / my photos so I did not notice the problem. I think I've seen cela somewhere in one of the forums of dv8p. I'll see what I can find if someone beat me to a solution.

  Edit to add...

  OK, back here... found what could be useful info to the Tablet PC forum, maybe it by wire gives a looksee

  http://Forum.TabletPCReview.com/threads/how-do-i-change-where-my-venue-8-Pro-stores-images.61453/

• Reference Dell place 11 Pro 7130

  Hello

  I recently buy the renovated site of Dell pro 7130.

  The Tablet is absolutely fine and works very well it was preloaded windows 8.1 pro version.

  But in this tablet, my camera does not work when I start windows's default camera app that it says please connect your camera. See nothing in Device Manager, I tried to manually switch the unit Imaging section but failed each time, I haven't updated all the latest drivers from Dell still no luck, also check that the camera is turned on in the BIOS.

  Can anyone please help and give me the driver for this device. or doe which means my camera died completely?

  Hello

  I have EXACTLY the same problem AND I tried EXACTLY the same things you did... you found a solution to this problem?

• Bought 11 5130 Pro place but Dell told Envoy held 11 Pro 7130 and send me a replacement

  I bought the "Dell place 11 Pro 5130" with the processor Atom Bay Trail and 64 GB on May 27, 2014. The item was delivered to me on May 30, 2014. The item arrived defective and the serial number indicates the element as "Dell place 11 Pro 7130" (see photo below - description of the object shows 5130 and 64 GB of storage)

   After talking to the agents and technicians, the specialist resolution Sandra, regimental 112383 says that she has checked and verified that Dell sent me the wrong item, but she would not give me a replacement or fill in the correct order. She seemed rude and appears discriminatory and also told me that I can do what I want, but it will only refund me the money and do not send me a replacement at any price.

  Dell cannot sell me a bad product and forcing me to return the unit and replace with the right pair. It is not only unethical but also illegal to sell something wrong and does not offer a replacement on your own terms and conditions.

  

  

  Just a tip, you can search on the support page of 5130 directly rather than rely on the service tag for the updates. http://www.Dell.com/support/home/us/en/19/product-support/product/Dell-venue-11-Pro/drivers

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Hi I recently transferred my mini iPad iPad pro data now all my game data is lost on both devices. It starts from the beginning of the games. Consedring I played all the games for 2 years, it's really sad. Any advice?

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro. Now all my game data was lost. All of my achievements and waiste game purchases. All my games is in the stages of early on both devices any help?

  Blazeyboy wrote:

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro.

  How do you transfer the data? Do you have the old iPad to backup and then restore this backup Pro iPad? Have you followed these steps?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Venue 8 pro update Atom Z3000 crashes system

  During the process of downloading the latest chipset update on the Dell Support site, the screen on my coming Pro 8, completely erased and I can't recover.  Any suggestions?

  My HW: Venue 8 Pro; 5830 chipset

  System BIOS: A.14

  OPERATING SYSTEM; WIN 10

  Update: 5830_Chipset_Driver_14P9K_WN32_603.9600.1000.61123_A06. EXE

  Version: 603.9600.1000.61123, A06

  mj100

  I forgot to mention was unable to turn off the system during the power failure.  However, I was able to solve the problem by allowing the battery to empty completely and recharge. The system was able to boot and operating system was available.

• Venue 11 Pro Ethernet Controller does not not at Gigabit speed

  Hello

  I got a place 11 Pro 7130 with the office computer docking station.  I'm having the same HDMI DVI issues that everyone else is having, however I have also another problem with him where I can't connect to the Gigabit speed network, even if it is announced as having a Gigabit Ethernet card.

  Dell Reference number that was on my order is part # 332-2364, which shows a number of part physically on the dock as model "K10A.

  In Device Manager, it shows my network card, which must be a 6 AX88772C USB 2.0 to Fast Ethernet adapt.  Fast Ethernet card I can say only means that it supports speeds of 10/100 MB, while according to the specifications for the dock it shows clearly that its supposed to come with a card Gigabit.  Here is a link to the job description:

  I also have this connected to two different network switches supporting the two Gigabit speeds and none of them will negotiate Gigabit speeds.  On the properties of the adapter in the Device Manager, it shows the highest speed that I can force the adapter is 100 full duplex MB.  When I connect my laptop E6520 to one of these same connections, it immediately detects GIgabit.

  As another test, I plugged a USB31000S Startech USB 3.0 adapter Gigabit Ethernet and that will also establish links to Gigabit speeds.  As by chance also a network ASIX adapter this adapter has, which is a reference number different and is described as an adapter Gigabit Ethernet in Device Manager.

  So, what's the problem with the network card in my desktop dock or is - this false advertising, or y at - it an update of the driver or something?

  Thank you.

  The NIC dock is only 10/100.   Unfortunately, the web page that you reference has incorrect information.   A request was made to change this, earlier when it was caught, but obviously that has not yet arrived.   I'm going to submit another application.    We will soon have a dongle available Gigabit, but he didn't intend to offer gigabit in the current desktop dock.

• I bought anytime windows Pro and now I have no update update file and cannot download add-ins

  I bought anytime windows Pro and now I have no update file to use to reload my OS and you can't download XP, I have no ID and product with no files, I paid $90 for nothing (need copy paper)

  I'm tired of trying all the fixes.

  There is no way of contacting microsoft without having to pay a tax to support!

  Can I get credit towards a full copy of windows 7 pro

  What was the original version of Windows 7 you have before using the "upgrade" Anytime   Whenever the upgrade cannot normally upgrade to XP.  It simply allows the upgrade of Windows from a lower to a higher level:

  Home--> Home Premium---> Professional---> Ultimate.