Dell coming Pro 8 with 10 Windows, all of a sudden not in tablet mode on-screen keyboard

Similar Questions

• Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

  Hello..

  I just received my upgrade to windows 7 in the mail and I installed it and all is well...

  But if I run a game that is not in the same as the computer screen resulution is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works very well.

  Some games may be put to the resulution have this computer.

  How can I do then come in full screen?

  Thank you

  Hello

  Have you tried to update the display driver? Maybe you have an older version that is not fully compatible with Windows 7. Just check the Web from Toshiba site to get the latest version:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally for mode full screen in games you choose the native screen resolution of your screen there.
  Check this box!

  And it would be interesting to know in what games this problem exists

• Wireless Xbox 360 Controller for Windows all of a sudden not connect into any USB port

  Original title: Wireless Xbox 360 Controller for Windows issue.

  Hi, I bought this back in 2008 and it has been flawless since today... I tried to use it and the controller is unable to connect to the receiver.

  There is no light on the receiver, even when I plug it into a different USB port there is still nothing... I even tried another computer. I assume the receiver is nakered?. Can anyone shed some light on this?

  If the receiver is so broken, can I buy this receiver on its own and that it will be compatible with my wireless controller Xbox 360 instead of having to buy another expensive controller...

  Thank you very much.

  Hello

  I suggest you to post your questions or comments about the Xbox 360 Forums, so that you will be provided with the assistance of your Xbox 360 product.

  Link: http://support.xbox.com/en-US/xbox-360/browse?xr=shellnav

  Hope this information helps you.

• Windows 10 on Dell coming Pro 11 32-bit Installer

  I'm trying to install WIndows 10 on Dell coming Pro 11 of 32 bits of the USB tablet. A key USB with Rufus and also media creation tool downloaded from Microsoft.

  From the USB on the Tablet brings the configuration for Microsoft Windows 10 with the language configuration menu. This is how far it goes. I can't select something in language settings, it does not it is stuck, I think. Tried 2 tablets 5130 but same result. Tried to format it in fat32 for uefi boot key and tried nfts. With fat32, is to show the Setup language screen, but noting happens does not not on the two tablets.

  If anyone has installed WIndows 10 shelf Dell coming Pro 11 5130 of 32-bit Windows USB 8.1 and how?

  Ahhh that looks the same then. I have a docking station, so I was able to connect a mouse and do it this way.

  I just downloaded the 64 bit version and installed. touch screen works even in the installation process!  give that a try!

• Have a problem with the Windows XP where he did not finish the boot.

  Have a problem with the Windows XP where he did not finish the boot. Ran remote console and @ the c: > guest tried to run chkdsk/r/p and received the error message "invaild drive. I put the drive in the argument?

  Hello Tmagic,

  Thank you for your message.  The correct format is below:
  chkdsk volume: (switches, e.g./r/p)
  
  
  example: chkdsk c: /r /p
  
  
  If these results find but cannot fix all the mistakes, you can also check with the manufacturer of your drive and possibly download a utility that will check the errors and repairs.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team at the 800 448 custom

  Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team customer to 800 448 1642 for assistance. my credit card is already loaded, but not received numbers.please series suggest

  Hi Kunal,

  If the problem still persists, can you please contact the support for this issue through https://helpx.adobe.com/support.html#/top_products.

  Please do not hesitate to me message in person if assistance is needed.

  Concerning

  Stéphane

• Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Have you tried to restart the iPhone by pressing and maintaining the sleep/wake and home buttons?

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• Dell coming Pro 8 doesn't wake up not the mode standby

  Twice now, when I leave my only DV8P and it goes standby mode, I can't do the wake him up.  The first time I had this problem, I could close it in connected state and it reboot.

  Both times, the battery was almost at full capacity.  It is not a battery problem.

  To my knowledge, I have updated the latest drivers.

  When I got my DV8Pro I had no problem with the sleep/power button.  After the installation of windows updates and dell updates my DV8Pro would not wake from sleep.  I had to hold the power button to the low during at least 10 seconds release the button and press it again and then it might start up.  I tried to uninstall the updates one at a time and that has not fixed the problem.  Has decided to start again and went to "Recovery Options" and select "Get Started" from the "all delete and reinstall Windows.

  My BIOS has been updated as a step to try to cure the problem of sleep and any withdrawal does not have to uninstall the update of the BIOS.  I mention this because maybe that helped my question because the re - install windows has been done with the latest BIOS. If you encounter this problem, maybe you want to update the BIOS before the re-installation of windows.  The BIOS, I used is A04.  (if you want to check your BIOS in the type of research "run" charm. Press enter on the key board, and then in the box that opens type "msinfo32" and click ok.  Look at the entries and you will find the version of your BIOS).  The latest BIOS for the DV8Pro is on the site of dell under support.  I think that I have also updated the update of the firmware on the chip before I re-installed windows.

  During the re-installation of windows, I have selected custom set upward and chose to not allow windows to update automatically.  The next step was to install all updates to the Dell web site DV8Pro.  After that all Dell updates have been installed, I went the updates of windows and installed every update, one at a time manually. After each update, I checked to see if the sleep problem reappeared.  This process took some time and I don't know what would happen if you installed just them all at once.  I know that from the top of the list and the installation of each of them individually has fixed the problem.   I still have my defined not updates have it automatically installed and today, there are 3 more updates.  Each of these one at a time, I installed and it still works.  Internet connection is also good, I checked after each update also.  I have not changed a new wifi again.  All this was done at home.

  Look well, it is a very frustrating problem and I almost all upset but I like the device so I gave him a good try to make it work.

• My MacBook Pro is running extremely slow all of a sudden. Help, please!

  My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

  Details: MacBook Pro (13-inch, late 2011)

  Processor - 2.4 GHz Intel Core i5

  Memory - 4 GB 1333 MHz DDR 3

  Storage - 500 GB SATA (264.44 498.88 free GB) drive

  OSX - El Capitan 10.11.5 version

  I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

  Back up all data immediately, as the internal drive may be failing.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite Pro M30 won't start all of a sudden

  I'm looking for assistance with feeding issues.
  For some reason my M30 Pro Sam wants not start all of a sudden.

  When I press on, the light blinks for a milliseconds and then nothing happens outside the DC flashes orange.
  I tried to start on battery only and DC only and nothing seems to work.
  I can't get anything to work - ideas?

  Think you that adapter, AC power or internal battery is dead?
  I only just got it repaired a month or he is before the end of the warranty but its all done now so have that support.

  see you soon

  Hello

  This looks like a motherboard problem and not a battery or an AC adapter problem.
  The LED provides an error code which can be read by a technician for laptop.

  Generally, the warranty covers the part repaired for about 6 months.
  If the defective part has been fixed then a month ago and the same part failures again then the warranty should cover the replacement.

  In this case, you must call the ASP in your country and should explain the issue

  Good luck

• Printer all of a sudden not to communicate with the laptop and cannot print, possibly because of antivirus software?

  All of a sudden I can't print from my laptop, wireless or via the USB port.  I get an error message "the printer does not."  I did the dx/repair and was able to print a test page, but that's all.  I would like to know if it would be because of my antivirus/firewall software?

  I use Windows 8 on an HP laptop.  Security software is Norton.  This has never happened before and I "ve been using this Norton subscription for at least 8 months, maybe longer.

  Is there something I can do in Norton settings to solve this problem?

  Thank you.

  Well, do not know what is happening in the cosmos, people, but it is printing again, but only with a USB cable, not of wireless.  Sigh.  Here, I'll still.

• All of a sudden not authentic Windows 7 prof

  I received a computer laptop gateway by my brother in law in last November. It worked perfect until a month ago, when suddenly the screen went black and a message appeared in the corner saying windows was not authentic. I ran virus/malware and it comes up with nothing. I don't understand why it isn't authentic all of a sudden. last week he began to have greater problems; super slow, refusing to open the system recovery, open new downloads and won't let me not sign as an administrator. my brother-in-law would never give me a pirated version, and it was fine for months then I don't understand what went wrong. There must be malicious software that is not be picked up by the scan, but I can't try to disassemble anything because it now cannot me access to recovery, or important files. Help!

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100
  License data-->

  Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.
  you have an activation exploit called RemoveWat installed.
  Office status: 103 blocked VLK

  Microsoft Office Enterprise 2007 - 103 blocked VLK
  your office is not genuine.
  which version and edition of windows is indicated on your COA?

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer