Take out the key not working

Similar Questions

• Envy 17: Keyboard Flex, the keys not working not properly, a fan failure

  I bought my computer laptop last January 2014 to JB HiFi, I already noticed that the keyboard flexes, but they told me that it is normal and the keys work well anyway.

  Move to the last month, I noticed that the bottom surface of my laptop keeps splitting open whenever I have fold to the top of my screen to turn it on. If it can be repaired by pressing gently to close again, it seems to have caused the laptop to ask a fan failure notice every time that I turn it on, asking me to press the Enter key to continue or wait 15 seconds so it will turn off.

  I searched on youtube on how to solve this problem and I discovered that blowing fan can solve this problem quickly. I tried several times the breath of the fan before turning on the laptop but it does not always work for me. Fan failure screen always displays at startup. I could not work long hours because I noticed that my laptop has been overheating a lot, probably because of the failure of the fan. I had to turn off for a few minutes let cool and start to work again, thus breaking any momentum of work I.

  Then, five days ago I realized that Fan failure screen is not displayed, but things just got worse. Left keys do not work correctly more for example. If I press 'e', it will enter "qe", "2" will enter the '13' and so on. Now this made me suspect that the space in which the keyboard flexes a lot and the fan failure overheating left hand side of the laptop were the cause of the keys with a malfunction, maybe condensation or so.

  Please help me out here, I use my laptop for my studies and I can't afford to buy a new.

  Kind regards

  Hi K N R K,.

  I tried your method three times, but the keys are still faulty. This is the current behavior I get:

  F5 - turn on the backlight with ' + '.
  F7 – lowers the volume with ' - '.
  F8 - increases volume with ' / '.
  2. does not show '2', but active random dialog boxes (depends on the active window)
  NumLock - types "5 [---].
  w active entry
  Shift + w - paste from Clipboard
  Enter - 'L';
  4 entries "14".
  5 entries "25".
  6 - entries '+ 6'
  -entries + '+ 6'
  x - entries 'x 25 '.
  1 entries "14".
  2 entries "25".
  3 entries '3 '.
  CTRL + v - entered "s".
  FN - inputs + 6
  SPACEBAR - entered '25 4. / »
  Up - entries '.on '.
  -Scrolling and entries "14".
  0 - entered "0" and enter
  . -entries '.» 3. "

  If ever the keyboard will work properly again, you have any recommendation with the intrados cleavage whenever I have bend toward the top of the screen to turn on the laptop.

  Kind regards

• Microsoft Security Essentials - the planned-out scan does not work.

  In addition to the question about the scheduled scan output after upgrade to Windows 7 to McAfee.Microsoft Security Essentials series instead of McAfee. The scan-out plan does not work.

  Support McAfee tried to straighten my computer of conversation I understood the problem of the update disc. I want to ask a question to the update command:? many problems were very pushed us all after your update. How now to get out of this dung under the name Toshiba upgrades?

  Hey Buddy,

  To be honest I don t know what you re talking about exactly. What has to do with Microsoft Security Essentials McAfee?

  As far as I know it s recommended using a security program only. You must use a Microsoft or McAfee, but not both!

• Aspire the s7 - 392 fn keys not working do not: airplane mode and switch poster

  Hello

  I read messages on the other fn keys not working do not, but can't find anything about these two (fn + q and fn + e). I just reinstalled windows 8.1 (and spin the dual boot ubuntu) and now these two keys have no effect.

  Does anyone know that drivers are responsible? Or have any other ideas?

  Thank you.

  Yes, if you look in the applications section of our manuals and drivers, you can download the Acer Launch Manager. Good starting point, but I'm not 100% on what software is required for the keystrokes, and not all software can be downloaded (in reason of the royalties and other legal issues).

• Dell Inspiron brightness (FN + F4/FN F5) keys not working only not on the operating system Windows 7 (64-bit)

  Hello.

  I bought a Dell Inspiron N5110 for my son who has vision problems. The laptop has been brilliant, but now he is suddenly unable to use the keys FN + F4/F5 to turn down the brightness. The F4 main movements only 1 level of maximum brightness and it has meant he is unable to use the laptop because it's too bright. I tried to re install different drivers from the Dell Web site without success.

  I hope someone can help out us here as the laptop is crucial for the education of my son, especially given his eyesight problems.

  Thanks in advance to anyone who can help me.

  Hello.

  I just managed to solve the problem. I uninstalled Teamviewer and the FN keys began to work properly.

  I then installed the latest version of Teamviewer and the keys still work very well.

  Thank you very much for all your help resoling this issue.

• some keys not working is not on the keyboard

  Hello

  I have a question on the keyboard of my 7537 15. b n. space downstairs left right and 2 do not work. I tried something like remove the battery and press and hold the Start button in 15 to 20 seconds, or remove the keyboard, but nothing has changed. Please give me some advice.

  Hi Acm06

  Nice day.

  Please write to us.

  When the issue started? There was no incident of liquids lately?

  Please try an external keyboard and see if all the keys are working.

  You tried a power cycle and also re-sitting on the keyboard, there is nothing we can try now, except on an external keyboard.

  If all keys work on an external, then it is a problem with the internal keyboard.

  Please PM US system tag #.

  Concerning

• Fn keys not working not not on my Satellite P200D-127

  Function keys not working not not on my Toshiba Satellite P200D-127

  I try to find the drivers for the keyboard, but not luck :(

  I'm trying to solve this problem since I bought this laptop.

  Can someone help me with this problem?

  P200D-127 is part of the PSPBLE series.
  The Toshiba European page doesn't provide the drivers XP especially for this series.
  But there are a few other P200 series and XP drivers were already released.

  Then why you n t check the hotkey Utility released for other laptop P200 series.
  Maybe it will work, if not, then there is nothing to do but wait until the drivers have been released.

• TV out button does not work on my Satellite Pro M30

  Hello

  I installed Windows XP SP2 and all drivers for M30 but the "TV out" button does not work although I have also installed the tool "Controls Button from Toshiba" (continues to ask to be assigned to a program), it worked before installing the new.

  I also noticed that the "Fn + F5" also does not work too (eg. do not send the signal to the TV).

  Can anyone help?, thanks in advance.

  Hi Karim

  Write about you? :)

  In any case, try to install TOSHIBA common Modules again. Maybe it helps!

• Special function keys not working not not on Satellite C50 - Windows 8.1

  Hello

  Please could someone help me.

  I have a Toshiba Satellite C50-A0393, I received a few months ago with already installed Windows 8.1 (64-bit). Today, I got a message saying that I had to watch the PC health, a blue message Toshiba about that the access agreement and I noticed that there are three updates that needed to be done, the only one, I remember being the Toshiba Video Player. I think that another had to do with the light of the charger?
  I do not know.

  But once I rebooted my laptop after the update I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc..). Then, I went to the Toshiba Office help and in Control Panel and select the keyboard tab. I did as the setting for the special function mode has been selected.

  Now, when this setting is in place, some keys work but for F3, F5, F6, etc. and when I want to use special features that the volume up and down work when pressing 'Fn', but the special function mode is still selected? These two work only, not the mute or the flightmode or bluetooth, which was operating normally before the updates.

  I googled but can't find something specific to 8.1, or not covered do not upgrade to 8.1. I can't find the flashcard utility and do not want to try something where I don't know what I'm doing. How can I get these special function keys working again normally? Sorry for the long message, but I wanted to give as much information as possible.

  Thank you very much

  Melanie

  Hello

  It seems strange to me that an update of Toshiba (Toshiba Video Player, etc.) would have an impact on the key features of function.
  However, the function key (F1 - F10) can be used in combination with or without the FN key. It depends on the special function key mode.

  In case you want to use the F1 - F12 functions without the FN key, the key mode of function must be enabled (should be set to the special mode of operation)

  Full details here how it works:
  https://APS2.toshiba-tro.de/KB0/HTD2503B90001R01.htm

  Now it these buttons would not work even if pressing the FN key, then there is a problem with the software.

  First of all I would recommend allows you to set the default BIOS because this mode key function can be changed in the BIOS too.
  After this, check if the key would work. If not, reinstall
  Key feature of Toshiba utility

  And the driver for the Toshiba system

  You can also check if the essential service has not been disabled.
  Start the Task Manager and go to start a number of questions. You must activate all Toshiba apps, services and then restart.

• MBP 15 "Early 2011: some keys not working not

  Hello Experts,

  I'm on a MacBook Pro 15 "early 2011 10.11.3 on OS X El Capitan.

  Now, some keys on my keyboard doesn't work anymore, only F1 - F9 (F10 - F12 still works fine) and the right SHIFT key.

  I read some other threads about this here, tried SMC-reset, reset PRAM, no change at all. (After reset the SMC he worked shortly, but after about 15 minutes even error.)

  FN + F1 - F9 does not either.

  Also, I checked my console to find errors, that's what I get when I press F1/F2.

  ATTENTION: assert (-1! = internal) failed in the function-[DeviceGammaContext isInternal]: 2096 in file /Library/Caches/com.apple.xbs/Sources/AmbientDisplay/AmbientDisplay-58/Sources/ DeviceGammaContext.m

  This error no longer appears.

  I have to say, I got my Logicboard exchanged 1 week ago by an Apple Technician due to the graphic problem common with the older MBP.

  Can it be a coincidence? It has something to do with the keys without work?

  Thanks in advance for your help

  Chyllie

  EDIT: There was no liquid spilled on the keyboard, or something similar, also when I plug in an external keyboard (non-apple) the right shift is working on it and also the buttons Play/Forward.

  It was a bad connection to the logicboard, for all who have the same problem!

• ZBook 15 G2: Brightness keys not working not

  I performed a clean installation for 10 windows on a ZBook 15 G2.  I installed the drivers from HP. The question is shortcut keys to change the brightness does not, however, all other functions of the key fine work.

  You can try the link below to fix this problem

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7343205&swItemId=ob_142323_1&swEnvOid=4132

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• I had a HP with XP Media Edition on this, got angry and destroyed someday drive hard, but always have the key, the key will work on another form of XP?

  As I said, I always have the key for it. But does not know if the key will work on just a normal copy of Windows XP? Also cannot find a download of XP? Guess that's what happens when you wait 17 years to ask about it.

  If your computer was HP and it came with this version of Windows installed, then you probably have an OEM of Windows version.  An OEM key does not work for a retail install the version of Windows.  To reinstall Windows without owning a set of install CD/DVD from HP, you will need to contact HP for help as they regulate the licenses Windows installed on their products.

  HTH,
  JW

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• 17 - e153sa - Win7 - brightness keys not working not

  Hello

  I recently bought a HP Pavilion e153sa 17. I installed Windows 7 on it and after some work can see only one thing that does not work - the function of the keyboard (except the key wireless works) keys. I don't know about the action key setting in the BIOS and I tried install software Quick Launch bar frame and even the HP Wizard, but in vain.

  Thank you, Jamie

  Hi JamieKitson,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook 17-e153sa and the function of the keyboard does not. I recommend to uninstall the keyboard in the Device Manager, then restart the computer. It must be reinstalled the drivers for Windows 7 and keyboard. I was wondering what version of Windows 7 do you have installed?

  I hope this helps.
  Thank you.

• Filters Photoshop CS6 Gallery is visible (not grayed out) but does not work.

  Filters Photoshop CS6 is visible (not grayed out) but does not work.

  I opened in 8-bit RGB jpeg.

  I can use the options of fluidity and blur, but nothing in the Gallery of filters (for example cutting).

  I am running on a MBPro CS6, recently restarted, 16 G of RAM, OSX 10.11.1

  I get no effect for smart objects or rasterized jpegs.

  You will notice the cut filter is selected, but has no effect on the picture.  There is no error message.

  It looks like I could use the filters a month ago.

  Thank you.

  Jeff

  

  The preview is enabled.

  Click just to the left of the opening.