Taken T60 supported CPU, s

Similar Questions

• ERROR: No supported CPU installed, HP P6310F

  HP p6310F

  Windows 7 Home Edition

  ERROR: No supported CPU installed

  CPU replacement

  Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9xxe/8xx (Deneb).  My understanding has always been that "9xx" means any phenom II in the class of the 900 series.

  I bought a retail Phenom II X 4 965 Black Edition, part HDZ965FBGMBOX number, installed and get the error message: CPU support is not installed message.  After searching and reading about the error message and other messages, it seems it might be due to the 'black edition' and/or because it is 125 watts.  It was the answer to a few others in the same situation as me.

  Can you please tell me why this CPU is not compatible and please help me with a list of compatible CPU?

  This is also in the 9xx series, but is it at 125W

  HDZ955FBK4DGM AMD Phenom II X processor 4 955 - Quad Core, 6 MB of Cache L3, 2 MB L2 Cache, 3.20 GHz, Socket AM3, 125W, fanless, OEM

  This lies in the 9xx series and is 95W

  AMD HDX945WFGIBOX Phenom II X 4 945 Quad Core Processor - 3.00 GHz, 6 MB of Cache, bus front to 2000 MHz (4000 MT/s), retail, Socket AM3, processor with fan

  The stock processor is an AMD Athlon II X 4 630, 95W

  I can provide any other information you may need, thank you very much!

  There is no AMD Black Edition CPU that are compatible with any PC HP desktop.

  That's what the problem is related to. Black Edition CPU are special processors who have discovered the multipliers for amateur quality motherboards. You could not access the multipliers to overclock the CPU with the motherboard you have installed it anyway.

  Even if you choose, buy and install one of the microprocessors in maintenance & service Guide there is no guarantee HP which will be exploited.

  You should also be aware that installing a different CPU than your office has been delivered with the warranty.

  Sorry to bear bad news.

  The good news is that the processors listed in the maintenance department & guide reputable reports of upgrade in discussions in the forum, to run.

  Best regards
  ERICO

• Why isn't the Xbox HD player - always taken DVD supported by the Xbox console?

  Why isn't the XBox HD player - always taken DVD supported by the XBox console?

  Hello

  See the XBox Forums.

  Rob - SpiritX

• Taken MIB supported by RVS4000

  Someone at - it a list of versions taken MIB supported by RVS4000? I could not find anywhere in the product packaging or the cisco Web site.

  Please check this.

  https://supportforums.Cisco.com/docs/doc-10276

• Satellite A110-293 taken supported CPU

  Hello

  If anyone can be good to enlighten me? I want to upgrade the CPU to a Satellite A110-293 of the current, [Intel Core Solo T1350 | http://ark.intel.com/Product.aspx?id=27243] to an Intel Core 2 Duo. This model has him [Compal HTW20 | http://www.pc920.com/upload/dede8953_20100103051533_13.pdf] motherboard. Is it possible or not?

  Thank you!

  Hello

  Check out this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• FT on the non supported CPU

  Is it possible to activate CVS on a host in a cluster has no a taken CPU supported by changing masks CPU? This is a laboratory, not a production system. All hosts are the exact same processor brand/model/no no, but CVS does not illuminate because it correctly detects the CPU. The custom mask CPU thing works for CVS?

  VCA is not related to FT.

  Both methods require certain characteristics of the processor, but they are different.

  VCA is only for VMotion 'friendly' on the model of different processor (but in the same family Intel or AMD).

  If your hardware does not support CVS, you can always do it manually using CPUID mask on each virtual machine (see VMware KB).

  FT is to have a virtual machine in waiting that is synchronized with a computer master virtual and ready to run if the ESX hosts the primary fails.

  André

• Support CPU Tecra M1

  Hi all fans of Toshiba and the users of the forum.

  I would like to get to know what are the processors supported for the Tecra M1 laptop computer product? Given that or what version of bios is required etc. It is a pity that the BIOS download page provides no further information on this subject.
  I would be happy to receive all responses,

  Sincerely yours

  Jens

  Basically, the upgrade of the processor is very limited. If you are installing a processor that does not recognize the BIOS, the CPU cannot operate at full speed or it does not start, or it may cause damage or overheating.
  Your best option would be to look at other Tecra M1 models and determine that we have the fastest CPU. That the exact CPU should work in your M1 with the latest version of the BIOS.

  In addition, I found this page on the Toshiba site, explaining the upgrades: http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm

• Presario CQ5320F: upgrade the processor 'not supported CPU.

  I was looking to upgrade the CPU on my Presario CQ5320F, for most popular processors in the list on the HP site for my computer. So I bought one, actually two, of the AMD Phenom II X 4 processors (Deneb). When I installed it, them, I get a message saying that the CPU is not supported. I don't know how I got it done, but it does not work. I bought two of the processors by mistake. The code on the processors that I bought is "HDZ955FBK4DGM", which seems to be the processor in the list of compatible processors on the HP website.

  -AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  -AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  -AMD Phenom II X 2 5xx (Callisto)

  -II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  -AMD Athlon II X 3 4xx/4xxe (Rana)

  -AMD Athlon II X 2 2xx/2xxe (Regor)

  -AMD Sempron 1xx (Sargas)

  I'd appreciate any help.

  Thanks in advance,

  nashville_bill

  Thank you for giving me the answer. I guess it's time to look for a new motherboard now.

  No doubt, it would be nice if someone let HP know this, so people like me would not try to use this processor with the motherboard.

• Support CPU for Satellite Pro 4600 series

  I tried to find out if I can pass the CPU on my satellite 4600. It is running a PIII 800 MHz, but what is the maximum that can support the system board?

  Hello

  Like chris said there is no way to upgrade CPU. You can upgrade the RAM. The maximum memory for your laptop model is 512 MB.

• Satellite A500-1GH - what this laptop supports CPU load

  Hello everyone.

  Does anyone know which processor is supported for this laptop?
  I mean the exact models because I know what Intel I5 installed.

  Or maybe if you know the best processor that can be installed in this laptop.
  Are there documents for this laptop because I can not find the drivers in the toshiba site?

  Thank you.

  Hello

  The laptop supports the * Intel (R) Core i5-430 M * processor
  All details can be found on the page of Intel:
  http://www.Intel.com/consumer/products/processors/Corei5-specs.htm

  > Or maybe if you know the best processor that can be installed in this laptop.
  > Here are all the documents for this laptop because I can not find the drivers in the toshiba site?

  Usually the CPU upgrade not is not supported by Toshiba... but if you use the CPU of the same family of CPU (i5 - 520 M, i5 - 540 M), then you should have a good chance that the laptop would be compatible with this CPU... but I would not recommend these updates.

  Why?
  (1) you will not see any performance gain
  (2) you will lose the warranty

  Welcome them

• Acer 6935G: taken max supported capacity of the HARD drive?

  Hello

  The original WD 320 GB died in my old Acer 6935 g, I bought WD7500BPKX 750 GB 7200 RPM 16 MB Cache SATA 6.0 GB / s 2.5 "(http://www.newegg.com/Product/Product.aspx?Item=N82E16822236561) for the replacement." But with this drive, the laptop started restarting after different periods of time. Question - is this ability to support? Googling the problem found that only 500 GB is taken in charge information. Maybe it is connected to the power consuming too, but I would just do not forget that the HARD disk controller is supported by this player.

  Thanks in advance

  I can tell you that we shipped this system with 120 GB of hard drives of 320.

  The system chipset is Chipset Mobile Intel® GM975/PM975 Express.

  Unfortunately, due to the age of the system, this is all the information I have.

  I don't see that we have tested all additional hard drives in the system.

• HELP ME REMOVE! Error 0 x 80004002: no such taken nterface supported

  Hello. I downloaded files, but the program has been slow down my computer so I completely removed my computer while it was downloading. now when I search all download files that not appear again and not can not be deleted. I tried but it gives me an error of error 0 x 80004002: no such nterface taken in charge. How can my computer back to normal so I can delete these files?

  Might be interesting to try to do a system restore
  at a time before you downloaded the files:

  How to restore a Windows XP system
  | a previous state using system restore
  http://bertk.MVPs.org/

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  Good luck...

• Hyperic support CPU / hard drive temperature?

  Dear all,
  

  
  

  Is Hyperic supports followed by CPU / hard drive temperature?

  
  

  -

  Sree
  

  Hello

  Unfortunately hyperic is not supported for this metric.

• Support CPU LAHF/SAHF in Long Mode

  Hi guys,.

  I try to install esxi on a HP DL380 G4 5 (I know its probably not supported, but it's just for learning). When I run through the installation program, the message I get is:

  the system has found a problem on your machine and cannot continue. VMware ESXi cannot run this processor. VMware ESXi requires a 64-bit processor with support for LAHF/SAHF in long Mode.

  So I tried to install ESX 4 on this machine that I was sure there 64 Bit CPU. ESX 4 successfully installed which means the processor is capable of 64-bit.

  Any ideas how I can get this to work?

  Thank you

  DrYv

  DL380/DL360 G4 models have XEON 64-bit processors. However, these processors do not support Intel VT as well as other features of the new generations of processors. Also, I have some of these models in my lab and run ESXi 4.1 on them (with guests from 32-bit only). Looks like that ESXi 5 requirements that cannot be met by these XEON Processors however. BTW. the last supported version of ESX (i) for G4 models was ESX (i) 3.5

  André

• ESXi 4 Installable U1 + taken VMware supported SD cards?

  I searched the Forum a bit ( http://communities.vmware.com/message/1476000#1476000 and http://communities.vmware.com/message/1471521#1471521 for example) and really have not found a good (or official VMware) answer the question of SD cards supported in versions installed ESXi user.  My biggest concern is the support.  Are the supported user installed SD card? For now, I'm setting up a new R710 with SD reader module internal and my support is through VMware and not Dell.  I was told (by Vmware sales) that VMware does NOT support install ESXi SD card, unless it is installed through the OEM directly.  But it seems strange.  I have the Essentials, so I don't get taken in charge unless I paid $300 per incident anyway. But I want to just make sure that if I called VMware they cling on me because I use a SD boot ESXi.  I really like installation on flash/SD because I think the management is far superior to the disk HARD local installs (as mentioned in previous posts).   Unfortunately, now I do not know what to think about the support... There is no mention in the HCL of Flash cards or SD recommended or taken in charge.  This seems to be a really horrible exclusion IMO since the ESXi 4 U1 install documentation refer to the HCL for Flash devices are supported.

  Seems like there is a lot of confusion on this issue from the perspective of support.  Can someone clarify this once and for all the GOLD offer some guidelines that wanted to keep me supported by VMware? All I found was this article (http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1010574) that references the USB flash devices.  This kind of logic applies to the SD cards as well?  I bought the kit SD from Dell (Dell's SD map - which seems to be a generic Kingston 1 GB).  If someone can offer comments/insight I would really appreciate it.  Thank you...

  Hello

  I was almost in your situation some time ago. In any case, I will share with you my thoughts. Maybe help you.

  I was evaluation install ESXi 4.0 for free in some IBM M2 x 3550 servers in internal USB flash

  As you say this KB is therefore clear: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1010574

  Install esxi (built-in) USB is supported only if is done by the supplier of OEM (HP, Dell, IBM and Fujitsu-Siemens). Is also supported an ESXi installable install by the user by using the provider OEM USB flash devices supported (and local support for hard disks).

  The statement above apply to the SD devices.

  If I am mistaken, HP Dell not install the embedded version of esxi in an internal SD and is fully supported by vmware. Don't forget vmware has a agreement with all this OEM provider to fully support their esxi facilities incorporated.

  For example, think about this hypothetical situation. If the full SD/USB support dies and your virtual environment is partially/fully down, it's a good idea to have a SD/USB backup to get up the infrastructure as quickly as possible. Is this not supported? I don't think so

  In any case, if you want to be 100% sure, purchase the material supplier Server esxi embedded wirh installed and maybe get a backup supported (provider) SD

  Hope this long answer helps you

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!