Talk to the two devices at the same time.

Similar Questions

• two device to listen to music online at the same time

  I have only one subscription, but I can't listen to music online of my two devices at the same time... If I buy the family pass... could do?

  Thank you, Diego

  Hello desorejonaremos,

  Thank you for using communities of Apple Support.

  If I understand your message that you are not able to listen to your music on two different devices at the same time. With an individual membership of Apple's music, you can play music online 1 device at a time. It also allows you to play your music offline for up to 10 devices. If you want to listen to your music online from multiple devices at the same time, a family membership will give you this ability for up to 6 devices.

  This article presents additional information on the operation of Apple's music with a family membership:

  On the Apple music

  With a family membership at Apple music, families of up to six people can enjoy all the benefits of Apple music, each with their own library.

  To use a family membership, you must first set up sharing of family. Then, when you join Apple music, choose a family membership. When your family members join music Apple, they must use the same ID share Apple they used to join the family. After they join Apple music and you connect with Apple ID them, they will automatically be added to your family members.

  You can also change for a family membership when you you affiliate.

  Best regards.

• How to put in place two sound devices and make two of them work at the same time?

  I am on Windows 7 Ultimate and I have a problem...

  I downloaded the SRS Audio Essentials software that improves the sound quality

  And I have Realtek audio device which is an audio driver that come with bulit in sound card

  But the problem is that I can choose only one of them as the default audio device

  When I was with Windows Xp, two of them worked at the same time...

  He is the captain:

  http://www.Flickr.com/photos/96392754@N07/8812378555/

  Help, please!

  PS: Sorry for my bad English... ^_^

  Hello

  Unfortunately this does happen, as it is by design,

  Here, a single device can be marked as default device, follow these steps below for more information.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Bluetooth connection with two devices at the same time? (on TX)

  I have a Palm TX and am trying to connect to the Palm Bluetooth keyboard wireless AND my cell phone of Nokia (Internet, etc.) at the same time.  The TX works very well with each device individually.  However, when I try to use them together, it won't work.  If I connect the keyboard first, then try to connect to the phone for internet access, it automatically CUTS the keyboard; and vice versa - any order of connection, it will cut the previous when it is connected.  (If the keyboard is connected and I use a fast connection button to go directly to the internet, when he tries to connect it will say that the port/cable is bad and can not connect.)

  (I know generally that a bluetooth device can support up to 7 other devices in its network and I've read where people supposed to logged keyboards and phones to the TX before I bought the keyboard).

  Any help is appreciated!

  fitnessdr wrote:

  Thank you for the information.  So if I had to return the new bluetooth keyboard, should I get the 'Palm 3169WWZ Wireless Keyboard", or y at - it another model I should look for?  (From what I can tell, I think he will use IR)

  Thank you!

  Well, that's the one I use.

  Don't forget to download the driver for the more recent (1.13) for the keyboard in the Palm Support pages for the keyboard:

  http://KB.Palm.com/wps/portal/KB/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_en.html

  Do not install the driver provided with the device on the disc - 1.13 is designed for the TX and fixes a bug that existed in the original pilot.

  WyreNut

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• Can I acquire at the same time HAVE two cards of different acquisition installed on the same computer

  Here's my question:

  I have two different cards installed in a PC. Specifically, PCI-6224 and PCI-6254. I need to acquire 50 analog inputs (real time). Can I use two cards to do? I mean I can synchronize these two cards and acquire simultaneously several channels at the same time?

  Thank you

  Alessandro

  Yes. You can use a RTSI cable between them. See the examples of the expedition. If you are using LabVIEW, look at several Synch - Analog Input - Cont Acquisition devices.

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• Use two assistants for the acquisition of data at the same time

  Hello

  I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

  I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

  How does this work?

  Kind regards

  Allard

  You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

• Is it possible to have the audio from two different sources and routed to separate outputs at the same time?

  I currently have a string of the guitar signal electric-Rocksmith Real Tone cable - ASIO 4 all help IK Multimedia Amplitube 3.   I would like to know if I could also watch DVD with her while the implementation of the programme of Amplitube with sound.  It would be great that I use the DVD for guitar and play at the same time.   I don't have the signal of two merged as one.  In my mind, I should be able to disable the ASIO devices and use them with DirectX as usual.  I could send the ampitube signal to the headphones and use external speakers for the guitar signal, and use the lessons of speakers for the DVD (or maybe YouTube) laptop on board.

  Is this possible?

  How can I do?

  Toshiba Satellite X 205-S7483

  Jeff

  Yes.  For example, I have my Skype phone calls go to my helmet (normal just plugged in the headset) while my media player plays my speakers.  You can choose your default communication or multimedia devices with a right click on the volume control icon and choosing "playback devices".

  Other programs can also be built to be "to the output current" and allow you to choose the output too.

• Can I save a RMAN database using 2 devices (tape drives 2) at the same time by setting OB_DEVICE?

  Hi all

  Can we backup RMAN database using 2 drives at the same time by setting OB_DEVICE?

  In case of increase the performance of backup on 2 tape drives?

  I know that the possibility to use OB_DEVICE_1 and OB_DEVICE_2 to specify the number of copy of backups in duplex.
  

  But what I want is to run backup on disk 2 of databases for a single copy!

  Your response is much more appreciate.

  Thank you and best regards,

  Kathya

  Hello

  Just spend two-channel SBT is implicitly:

  CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 2 BACKUP TYPE TO BACKUPSET;
  

  or explicitly block execution:

  RUN
  {
    ALLOCATE CHANNEL c1 DEVICE TYPE sbt;
    ALLOCATE CHANNEL c2 DEVICE TYPE sbt;
    BACKUP DATABASE PLUS ARCHIVELOG;
  }
  

  Kind regards

  Mitja

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• Two virtual machines running at the same time

  Fussion 1.0, I remember being able to use two virtual machines at the same time, and each me each own IP without worrying if I used the bridged network configuration or address NAT. With the Version 2.0.1 (128865), only one will get an IP address and the other, the two XP SP3, visit account disabled NETWORK card. Any recommendations?

  Yes, it's tru, but I updated the vmx file to have another MAC. NIC I get this error when I try to boot the secondary machine (which otherwise boots fine solo).

  As I mentioned in the linked post, there are several unique identifiers that MAC address. Fusion has a UUID, and Windows has a SID. All must be unique (my guess is that it's the SID).

  The network bridge on/dev/vmnet0 of the device does not work.

  Which will result in network bridge does not work. The only suggestion I have right now is to try to restart the host, but demand around other people seem to be seeing this as well.

• Y at - it re Hello Forefox ability to make multiple calls at the same time as the Conference call? Talk to the whole family together?

  Great love to the people behind this wonderful addition! I also want to be able to call my family threw away and we all in the conversation together. It seems right now it's just a one called. Will there be the ability to have several people on a call at the same time?

  Hi, when firefox Hello usable only for a conversation between two people.

  multi-party videoconferencing is on the roadmap to long term, but it will take a lot of Engineering (Hello firefox is based on the webrtc standard which is a peer-to-peer protocol between two machines-multipart calls can be a rather difficult thing to understand on this basis).