Impossible to download Skype after system restore
My brother did a system restore thinking that would help the computer somehow and now I can not download the latest version of Skype, it says 1603 error code and I have went to the Board of Directors and got the reflection to check for problems and he said that everything works well, and then I try to download it again and I still get the same error code
Try to download the Skype 7.1.0.105 currently being using this Setup program:
http://download.Skype.com/MSI/SkypeSetup_7.1.0.105.msi
Take note of any error message when installing reseived.
Tags: Skype
Similar Questions
-
Impossible to uninstall Symantec Endpoint Protection after system restore
Hello
a program has been uninstalled (Symantec Endpoint Protection)
After have rebooted and still have problems to install a newer version, I decided to do a system
Restore prematurely, I uninstalled the original version.
(Since I couldn't find the installation files or my license info)The old version worked again. Now I am able to start the
new version, the old version will not uninstall.It just sits there in a small box with a bar saying Windows of progression
in the configuration of Symantec Endpoint Protection and it remains as it
for as long as I left, at least 25 minutes.I thought that the system restore would put things back exactly as they
have been, but it's apparently not the case.OT: Impossible to uninstall after system restore
Any ideas on that?
The OS is Windows 7 Pro 64 bit 64-bit.
I found this, but have not yet tried.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-usI was able to cirumvent the problem by a selective startup in Msconfig.
I disabled all startup items, all services not MS, restarted and then uninstalled
successfully. However, I met another strange problem.
After uninstalling old version, I rebooted (the system was still selective
startp) I put a new restore point and installed the new version successfully.
Later, realizing msconfig has been arrived at "selective", I went and
has tried to return to Normal startup. However, when you select normal
and hit 'apply', it immediately jumps to selective. I have never seen it before.
I didn't know how to solve.
Instead, I uninstalled the new version of the AV program, jumped to the restore point
I did before I installed, rebooted, open Msconfig and have been correctly set up
In normal mode. Then reinstalled the AV.
Everything is OK now.
You ever heard of this problem of msconfig before?
-
Impossible to download SKYPE. It is said is not compatible
Impossible to download SKYPE. It is said is not compatible
Hi samfell
1. what operating system is installed on the computer?
2. which version of Skype you trying to install?
Check out the link below to identify the operating system installed on the computer.
If you have Windows 7 installed on the computer, then you can refer to the below link to the Compatibility Center provided and make sure that the compatible version of Skype -
For Windows Vista you can check the Compatibility Center link provided below and tick-http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Skype
I hope this helps.
-
NEED DRIVERS AFTER SYSTEM RESTORE
HP Pavilion g6-2128tx Notebook PC
Serial number: 5CD2231LJF{Information}
After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!
Hardware ID
Ethernet controller:
PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05
BCM20702A0
USB\VID_0A5C & PID_21E3 & REV_0112
PCI device
PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01
PCI Simple Communications controller
PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04
SM Bus controller
PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04
(USB) Universal Serial Bus controller
PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04
I run on Windows Ultimate-64-bit
Help would be GREAT
Hello
Download and install the following.
After this Setup is complete, restart the laptop.
Intel Management Engine Interface.
Intel USB 3.0 Host Controller Driver.
Kind regards
DP - K
-
Impossible to uninstall Creative Suite after system restore
Recently, I did a system restore on my windows machine 8. This brought my creative suite 5 which I already uninstalled. Now I can't remove it because the uninstall program seems to have problems. He doesn't show me any items of uninstall, therefore, I can not delete all products in the group. Is there another way to uninstall the product? Thank you!
The uninstall program could have corrupted by the missing files. Run the cleaner of the Creative Suite from Adobe tool: http://www.adobe.com/support/contact/cscleanertool.html and delete the files from there.
Once removed, remove the files(Run->%temp%) temporaires et videz la corbeille aussi bien.)
Check if this is useful.
-
DV6 - 6153cl drivers for biometric devices missing after system restore
Hello
I have a HP Pavilion dv6 - 6153cl Entertainment PC with Windows 7. I used the fingerprint reader, since I have my laptop. The scanner has stopped working.
Background: two weeks ago, I downloaded the latest version of Norton 360 (Version 21.1.1.7), which caused my laptop to keep crashing every few hours. After much time consulting technical support, I did a system restore to a few days before the new version download then downloaded the version of Norton 360 and active. This solves the problem of crash.
Problem: After restoring the system, my fingerprint reader no longer works. By control panel > all Control Panel items > biometric devices, "Windows do not have the biometric devices on this computer. You will need to attach your device or install device drivers. "Can someone tell me what are the correct drivers that I need and where to find them?
Thanks for your help!
Hello
First of all, download and reinstall the driver Validity Sensor on the following link.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55109.exe
Once completed, restart the laptop.
If it still not works, you may also need to reinstall HP SimplePass on the link below.
http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54680.exe
Yet, when it has installed, restart the laptop.
Kind regards
DP - K
-
Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.
This may be of some use for you guys:
Value of the property
Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
Status 0x0180200a started
Blocking problem 0 x 00000000 (0)
Service IntcAzAudAddService
Blocking capabilities 0 x 00000000
Config flags 0x00000000
Class MEDIA
Manufacturer Realtek
Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
HDAUDIO\FUNC_01VEN_10ECDEV_0888
HDAUDIO\FUNC_01VEN_10EC
HDAUDIO\FUNC_01
Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
Location internal High Definition Audio Bus
Bus number 0x00000000
Name of the enumerator HDAUDIO
Description Realtek High Definition Audio
Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
Name of the object physics \Device\000000a2
Number of UI 0x0000ffff
BusType GUID {41203534-2037-3144-2042-422044362041}
Former bus type 0x00000005
Type of device 0x0000001d
Installation state 0 x 00000000
The device address 0 x 00000301Oem2.inf of device Configuration file
CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
AssociatedFilters Wdmaud, swmidi, redbook
Pilot RtkHDAud.sys
InfPath oem2.inf
InfSection IntcAzAudModel
InfSectionExt. NTx86
ProviderName Realtek Semiconductor Corp.
DriverDateData 00 40 18 67 CA 01 E7 D7
DriverDate 17/11/2009
DriverVersion 5.10.0.5983
MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
DriverDesc Realtek High Definition Audio
SetupPreferredAudioDevicesCount oneClass MEDIA
Audio, video, and game controllers
Installer32 MmSys.Cpl, MediaClassInstaller
MmSys.Cpl, MediaPropPageProvider EnumPropPages32
Troubleshooting-0 hcp://help/tshoot/tssound.htm
Icon 3004Thank you!
You can try to contact support from Realtek:
http://www.Realtek.com.tw/contact/
Also, try to run this fixit:
-
lose the connection to the net after system restore
I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)
There is no problem with the connection that the net works with other PC not mine
When first I used the net all the me I connect the Caron and its automatic execution
so why it dosent run now the files make me lose the file how to fix
When you did the system restore you have lost the connection to the network.
Create a new connection
Dale may
-
Windows Vista - what should I do after system restored?
My home edition vista recently will not start. After I turned it on, it loads for a while and stops automatically. I tried pressing some buttons for example F2, F8, F10 function for repair and recovery, and it is able to load the previously saved startup page. After that I turned it off, it cannot start again. I tried twice on the recovery of reparation and restored successfully, but now the repair and recovery seems no longer works.
(1) what should I do if I managed to open the start page?
(2) what could be the cause of it? In any case to restore so that it will work like new?
Hello
See if that helps you.
Startup Repair options.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Reinstall options.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
___________________________________
And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Them or us ask the right sequence of key.
___________________________________
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
critical error after system restore and windows updates
I cleaned up my old computer and did a system restore. Subsequently, I have install windows to perform automatic updates. The computer detected 37 windows updates and install them. After a successful windows install update, the computer said I had to reboot so I did. Now the computer tries to start but then comes a blue screen with a bunch of text and then said: critical error. I tried to do a system restore, and when I get to the part, he begins to restore and gets to 13% and then says critical error and I have tried to try again, but nothing happens. Stuck... Please advise.
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a repair system restore / boot:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Dell V313 does not print after system restore
My apologies if I should have posted this elsewhere.
I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.
I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...
My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!
I moved that pesky IE11 updated again, but this does not solve the problem.
When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.
I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)
Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.
I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.
Instead, it adds the work in file print, which then comes out after a reboot.
The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.
Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.
Thanks for reading,
Matt
Matt,
Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.
Start, Control Panel, Manager of devices.
Go to the section USB controller, and then click the plus sign +.
Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.
Restart your computer.
--------------------------------------
Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.
Rick
-
My seagate backup more external hard drive not recognized after system restore
I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?
It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?
Hello Neil,.
First of all, we apologize for the late response.
- What happens, do not install the updates?
- What is the complete error message you get, when the update installs?
- What is the update kb article number?
for problems with windows updates, run the tool in troubleshooting Windows Update:Open the Windows Update troubleshooting toolFor the problem with the external hard driveCode 28 shows, the drivers for this device are not installed.Error codes in the Device Manager in WindowsLog in as administrator and then try to install the driversHow can I connect as an administrator?S eaTools for Windows
http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/
Additional information:"Access denied" or other errors in the access to or work with files and folders in WindowsI hope this helps. Please get back with the results. -
Hello
Before that I brought my computer - not that I tap on now - in a shop three weeks back, I did a system restore to this subject with two Windows 8 recovery disks. While the computer was that I heard bad things about the shop of my neighbours, which course is the repairman recovered data on his computer and put a virus on his desk. In any case, I'll be back the computer tonight and even if I did the factory restore before you import it in, I did another one with the same two tonight recovery disks. After the installation is complete, I decided to turn the computer off and continue the download of applications, etc., tomorrow, but it would not turn off:
Instead, I got the following message and wonder what it means, especially if the same computer repairer could put a virus on my desk as he did my neighbor.
He said that he could not close because it detected EXCEPTION UNKNOWN SOFTWARE and he gave the number according to 0xe0434352 saying that it occurred in the location 0x170389cc
Anyone know what these numbers mean? I now do another reset of my computer, but this time of the computer itself, not the recovery disks.
How can I find out, once again, if a virus has been on the registry office, etc., while the computer is out of my care?
Thank you
Thanks for the information. I did another restore of factory and the machine booted correctly without these messages; However, I can make the safe mode boot / clean anyway. Never understood why go in safe mode allows, but will try.
Thank you
-
Could not open the cloud creative app after system restore
I tried to re-download creative cloud after having to perform a system restore and now since that time it says I can't open it because its is missing or broken. and tells me to re-download.
so, when I try it. He said exactly the same thing.
uninstall all cc including the application of cc office.
clean your computer of files cc by http://www.adobe.com/support/contact/cscleanertool.html
Restart your computer (do not skip this)
Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud
Use the desktop application to install your programs and the cc events
-
CC is not opening after system restore
I have download before and it worked fine, then I have system restore and re installed, no luck I tried to erase the files, nothing I tried to make a new profile and downloading there, nada this my third time here also last time someone said if they can take control of my pc to fix my pc died im here now some can please help me I want to open .it installs fine only when I delete the files the last time I installed it but it's not open, I just fix that Yes this versions trail - help please
Try once with the steps below:
Adobe end all processes from the Task Manager.
Uninstall Adobe Creative Cloud app.
Using creative cloud | Uninstall the creative cloud desktop application
Step 1:
Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".
Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.
Step 2:
Navigate to C:\Program Files (x 86) \Adobe.
Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]
Impossible to remove? Rename it to Adobe Creative Cloud trees.
Step 3:
Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.
Type below command and press the enter"" key.
AppData
Then go to the Local > Adobe.
Open the Adobe folder and delete folders named AAMUpdater and OOBE.
Step 4:
Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.
Then, download and install the Adobe Creative Cloud app and check.
https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe
Maybe you are looking for
-
I can not connect a turtle beach px51 to my Apple Tv
I can connect my iPad and iPhone to my Bluetooth of turtle beach headset but on my generation of Apple tv 4 it does not connect. He gets up and sees the device, but when I go to pair, he wants to put me in an access code quickly then comes up with a
-
Moving old iMac to newer model
I have a 2007 24 "iMac running 10.5.8 at home and just bought an iMac 27" 5K new. I used Time Machine to back up my old Mac via a USB 2.0 drive, but I'm not sure about migration anything over the old to the new. I would like to have all my files avai
-
I was wearing my watch the other day and I heard a rattling noise and when I looked at my watch face had completely lost the steel case. Has anyone ever heard of this happening before? Rich
-
Card wireless Stick as a network drive?
I apologize if this has been asked before. I tried to configure my 16 GB Stick wireless as a network Player Windows 10. The only problem is that he isn't report to the correct size, and I also get a weird error trying to move on all documents. I just
-
Problem with headphones 9320curve blackBerry Smartphones
Hello the volume of the headphones during calls is down, can not adjust. The volume of the speaker is OK, can adjust. No idea what is the problem and what is the solution