VMWare Fusion 6.0.5: Could not open/dev/vmmon: no such file or directory.

Similar Questions

• VMware Workstation 9: could not open/dev/vmmon: no such file or directory

  I'll have a plethora of problems installing and get VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0 - 26-generic).

  I experienced exactly the same process on my laptop and it works perfectly, while on the desktop, it seems that everything breaks. Could someone give me some kind of help / advice on how I can do to get this working. I tried full uninstall / reinstall of the software, headers of the kernel, kernel images, different kernels, patches here on fresh installs of everything I can think of. Here are the issues I encounter in the order of importance (or so I think):

  (1) whenever I try to open my new (and virtual) machine, I get the error sequence of:

  "Could not open/dev/vmmon: no such file or directory. " Please make sure that the "vmmon" kernel module is loaded. '--> 'Failed to initialize the device monitor. "->" cannot change the power state of VM: could not find a valid peer to connect to '

  
  

  (2) every time I try to run the following command to configure the modules on a completely fresh setting (reinstalled kernel, vmware) I get the following output:

  sudo modconfig vmware - console - install-all

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmmon-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  Using 2.6.x kernel build system.

  make: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only»

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmblock-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c: in function 'ExecuteBlockOp ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:285: warning: assignment of incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:296: warning: passing argument 1 of the "putname" incompatible pointer type

  include/Linux/FS.h:2052: Note: expected ' struct filename *' but argument is of type ' char *'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/inode.c:49: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:38: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c: in function 'DentryOpRevalidate ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: warning: argument passing 2 of 'actualDentry-> d_op-> d_revalidate' makes whole pointer without a cast

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: Note: expected 'unsigned int' but argument is of type ' struct nameidata *'

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  Warning: "putname" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  CP f vmblock.ko. /... vmblock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmci-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmci-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  CP f vmci.ko. /... VMCI.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vsock-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  CP f vsock.ko. /... vsock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  Starting VMware services:

  Virtual machine monitor failed

  Virtual machine communication interface failed

  Family of VM communication interface socket failed

  File system is blocking

  Virtual Ethernet failed

  Demon of authentication makes VMware

  Cannot start the services

  (3) I often get the Ubuntu "this program has planted" messages on "/ usr/lib/vmware-installer/2.1.0/vmis-launcher" "' (this message of crash always occurs when you run the"vmware-modconfig"above command on a new installation.

  (4) at different times during Assembly and have VMware workstation on my system I get Ubuntu hangs on "/ usr/lib/vmware/bin/appLoader" and even "/ bin/su" (especially when you are trying to install - su NEVER blocks anywhere else).

  Thoughts / ideas on what is happening on earth / what could have caused this all go so downhill / how to go about fixing?

  Thank you

  Solved.

  The problem is that for another program I used gcc - 4. 4 instead of later. Restore the (by update-alternatives - config ) for gcc, g ++ and CPC - bin.

  Not a very graceful exit to have a version not valid I would say, maybe some sort of basic check could be added to ensure that the correct versions are present?

• "Could not open/dev/vmmon: no such file or directory." Please make sure that the "vmmon" kernel module is loaded. »

  I installed vmware Player on a linux Open Suse (32-bit), the supplied file .bundle machine. It worked very well, and I could load my file of virtual machine very well. Then, my machine had a random failure. When it restarts, I could no longer use my virtual machine, always get the error:

  "Could not open/dev/vmmon: no such file or directory."

  Please make sure that the "vmmon" kernel module is loaded. »

  I look in / dev, and of course, there is no vmmon. I see a lot of archived messages stating that you must run the script ' vmware - config.pl '... (more specifically the following link: ) http://blog.solutionperspectivemedia.co.UK/?p=6 )

  but I do not have it. It seems that maybe it was a part of the installation (no-bundle) more old?

  What should I do? Is this a known problem, as indicated in this Web site? Or random failure caused something? I'm quite confused.

  Have you tried to uninstall as root? Otherwise I think it won't work.

  With respect to your original problem, I got it, too, and that's what I did:

  sudo mv/usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old

  vmware-modconfig--console--install-all--appname sudo = 'VMware Player' - icon = 'vmware-player '.

• Error when you try to run vmplayer 7.1.2 on CentOS 7-"could not open/dev/vmmon: no such file or directory."

  I am looking for working on CentOS 7 vmplayer.  I ran the .bundle as root and then when I try to create a VM it fails on with the error "cannot open/dev/vmmon: no such file or directory."

  CentOS 7 is not supported?

  In my research, I did not see any fix.  I think he just doesn't...

  vmplayer 7.1.2 works for me on CentOS 7.

  The problem was the secure boot must be disabled in the BIOS.

• Get ' could not open/dev/vmmon: no such file or directory.' error

  Im trying to open VMware Fusion Pro 5.0.5 on my Mac, and it continues to give me the following errors in the order:

  1.

  2.

  3.

  I would be extremely grateful if anyone knows how I can solve this problem and access my fusion I need emergency to use some software it contains.

  I did a "collect information of technical support" (attached), but unfortunately this means absolutely nothing to me. Post edited by: Carla15

  Hi Carla15and welcome to the VMware communities!

  Your Mac has been upgraded to Yosemite (OS X 10.10), but 5 merger is too old to be compatible with Yosemite.  You must upgrade to 6.0.5 Fusion or Fusion 7 for compatibility with Yosemite.

  See you soon,.

  --

  Darius

• Impossible to run virtual machines (could not open/dev/vmmon)

  Currently, I can't open one of my virtual machines. I get a dialog box appear saying "couldn't open/dev/vmmon: no such file or directory".

  I'm 10.11.4, on a current model Mac Pro under VMWare Fusion 8.1.0 on OS X.

  Can any ideas on how I fix?

  The following lines are written to the console when I run VMWare Fusion:

  07/04/16 com.apple.kextd [53 5:43:20.108 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.209 PM]: JMicronATA.kext has no Info.plist file.

  07/04/16 com.apple.kextd [53 5:43:20.224 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.239 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.245 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.278 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.284 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.xpc.launchd [1 5:43:20.303 PM]: (Menu com.apple.xpc.launchd.oneshot.0x10000007.VMware [1012]) initial merger Service came out with abnormal code: 1

  07/04/16 com.apple.kextd [53 5:43:20.406 PM]: unapproved kexts are not allowed

  07/04/16 com.apple.kextd [53 5:43:20.406 PM]: ERROR: invalid signature for com.vmware.kext.vmci, does not load

  07/04/16 com.apple.kextd [53 5:43:20.425 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.431 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 5:43:20.445 PM EET [368]: failed to SecTaskLoadEntitlements error = 22

  07/04/16 com.apple.kextd [53 5:43:20.481 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.487 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.599 PM]: unapproved kexts are not allowed

  07/04/16 com.apple.kextd [53 5:43:20.599 PM]: ERROR: invalid signature for com.vmware.kext.vsockets, does not load

  07/04/16 com.apple.kextd [53 5:43:20.609 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.615 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.663 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.669 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.776 PM]: unapproved kexts are not allowed

  07/04/16 com.apple.kextd [53 5:43:20.777 PM]: ERROR: invalid signature for com.vmware.kext.vmnet, does not load

  07/04/16 com.apple.kextd [53 5:43:20.787 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.793 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.838 PM]: cannot create the kext: invalid CFBundleVersion entry cache identifier 209 input.

  07/04/16 com.apple.kextd [53 5:43:20.844 PM]: cannot create the kext: invalid CFBundleVersion entry cache 11 identifier input.

  07/04/16 com.apple.kextd [53 5:43:20.948 PM]: unapproved kexts are not allowed

  07/04/16 com.apple.kextd [53 5:43:20.948 PM]: ERROR: invalid signature for com.vmware.kext.vmx86, does not load

  07/04/16 5:43:23.458 VMware Fusion [936] PM: failed to SecTaskLoadEntitlements error = 22

  07/04/16 5:43:23.458 VMware Fusion [936] PM: failed to SecTaskLoadEntitlements error = 22

  07/04/16 5:43:23.458 VMware Fusion [936] PM: failed to SecTaskLoadEntitlements error = 22

  07/04/16 5:43:30.000 PM syslogd [51]: sender ASL statistics

  Hello

  First thing I would try is a reboot, but given the error, I would not hold my breath on this binding.

  The error messages seem to suggest that some drivers are corrupted. The only way to solve, which is by uninstalling VMware Fusion 8, restart OS X (ensuring that no driver remains persistent), then install VMware Fusion 8 again.

  Note, that this will not delete your virtual machines (with additional backups is always a good thing if)

  --

  Wil

• VMware Converter failed % 2: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  This is the result of that port TCP 443 is blocked?

  Nope

  More likely, the system of the source (172.19.129.10) cannot reach the host ESX by DNS or TCP Port 902 is stuck between them.

  HA - nfc: / /------Corcus [storage2] / [email protected]:902

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Adobe Reader could not open or download the pdf files

  I can't open or download the pdf files. I used to be able to, but for some reason it stopped working. Adobe is updated and I am on Windows 7. Nick

  Have you tried other pdf files? to check for malware.

  Download the free versions of these tools. First check the updates and then run a full scan with each.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SpywareBlaster
  http://download.CNET.com/SpywareBlaster/3000-8022_4-10196637.html

• Reception: Z:\Preboot\utils\spi\spilib.pyc could not be copied; Error 1392 = the file or directory is corrupted or unreadable.

  Using Win XP Pro. While trying to make a backup on external USB disk, using rescue & recovery I get the message above. I've recently upgraded to rescue & recovery to the current version 4.21; The USB driver has been installed using the original version 1.00.00 RnR; Then this cause above corrupt or unreadable file or directory?

  Please, I beg you! can someone can help me with this? I would be grateful, thanks; HDS

  HeinrichDS

  Rescue and Recovery is, in my view, a Lenovo/IBM utility. Contact their tech support for help with their program; It is not part of Windows. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 Ult running VMWare Fusion on an iMac - will not open the Medal of Honor-Allied Assault

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  In order to be able to run PC games on my iMac using Fusion-VM, I was obliged to purchase Windows 7 like Windows 7 on my PC was an upgrade. Despite the fact that the Ministry of HEALTH ran under Fusion using Windows XP, which is entered on my PC, now when I try to run MOH I'm greeted by a message indicating that Windows has encountered a problem (not identified), but will seek a solution. It was more than four weeks ago but still no word from Microsoft. Oh yes, Age of Empires is running, you don't know.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What is the exact error message when you try to open Medal of Honor?

  Medal of Honor-Allied Assault is compactable with Windows 7. The issue seems to be the installation of the program. I suggest you to reinstall the game Medal of Honor on your system and check if you face the same problem.

  You can check the link below to uninstall the program under Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install a program see the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  You can also post your question on the link below.

  http://Forum.EA.com/eaforum/categories/show/190.page

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not open the doc or docx files

  Since the last OS X update cannot open doc or docx files.  What is the solution?  Thanks, Harry

  You right click on a doc or docx document and open it in any version of Pages, preview, TextEdit, or LibreOffice.

• Could not open the desktop icons - this file doesn't have a program (see details).

  original title: when I do a shortcut on my desktop and try again later and access the site by clicking on the shortcut I get the following text "this file doesn't have a program (see details).

  When I click on the registered Web site shortcut it does not work on my desktop & I get "this file has not a program associated with it for performing this action. Create an association in the Folder Options Control Panel. It's ok if you know what that means. I did as he said and got totally confused on what to do and what information I should include. In the end I gave up and now go to my browser and access to the Web sites of this way. His long-winded, but it works! I miss using my shortcuts! Help!

  Hello

  Click Start, Control Panel, add/remove programs
  Click Set Program access and Computer Defaults
  Click Custom and select your web browser, and then clickOK.
  Screenshots: http://msdn.microsoft.com/en-us/library/windows/desktop/cc144162(v=vs.85).aspx

• Could not open the cc 2014 illustrator file after the update in 2015

  After you open the file, I see layers in the layers palette, but nothing is rendered on the screen. Help?

  OK found a solution: I disabled the GPU performance, and now I can see my items in the file.

  

• Could not open the mk:@msit store file: c: \

  This message appeared today after compiling a Microsoft HTML project on one of my RoboHelp projects

  .  I have compile daily as a chm file and switch to a network drive for our work from home employees.

  I tried everything I know to do.  I've compiled another project that I use for testing.  I can see this project without an error.

  I deleted the .cmd file and recompiled.

  Any suggestions?  Dare create as WebHelp (decisive primary provision on call center support)?

  • I can view all previous versions of chm projects on the disk.
  • Ran RegSvr 32
  • Only the project is assigned.
  • Project is located on the local disk.  I copy hard disk shared after compilation.

  • Running Windows XP Professional

  • RoboHelp 8

  Thank you

  Holly

  Maybe try to create a new presentation according to this thread:

  Error fatal file CHM in RoboHelp 7 compilation

  http://forums.Adobe.com/message/855467#855467

  Make sure you do new page layout, not duplicate layout that would be copy to corruption.

• Could not open the Nikon D300 raw files in camera raw in CS3

  Is there a solution to this?

  The D300 is supported in CS3.  The latest version of Camera Raw compatible with CS3 is 4.6.  If you have installed correctly, you should have no problem.  Your camera has been supported in at least one previous version, I don't check real closely.  But you need to install and use 4.6.