Target and slots

Similar Questions

• Lack of cRIO 9154 in the add targets and devices dialog box

  Hello again all you lovers forum useful!

  I have an existing LabVIEW project which includes a Hypervisor PXI real-time target.  One of the devices that target is a chassis cRIO 9114.  I now need to add a cRIO chassis additional 9154 so according to a conditional disable signal, I can modify my code to talk to the old chassis or the new chassis, which keeps my modular code across different hardware.

  However, I write my code update on my regular computer which is not hooked to the target, so when I right click on the target of the hypervisor in my project and select new-> "targets and devices...". ", I can not select the" existing target or device "to be detected automatically.  Instead, I click on the 'new target or device' to add just anyway, and I expand the CompactRIO there, and... no 9154.  I have a bunch of other cRIO features (see screenshot), including the 9114, but no 9154.

  I guessed that maybe my LabVIEW installation (2012 SP1) know not this chassis when it was released last year, so I tried to install the latest drivers from device with discs on developer LabVIEW 2013 that I just got, but he hung up during installation (the first time at 0% the second time at 27%, listed as "Validating install" for long, long before I was abandoned and cancelled).  I restarted my computer, but no change to this problem.

  Does anyone have any ideas as to why I can't choose a newer chassis to insert in my project without that it is actually attached to my computer?  And I was too quick to renounce installation of the driver, not that I don't know if that would have solved the problem anyway?  : PEI

  Thanks for your help, as always,.

  -Joe

  

  Hello Joe,

  The 9154 NOR is a RIO MXI-Express chassis that's why it should appear under the section of chassis MXIe-RIO.

  

  For installation if you are concerned that it has not installed correctly, you can try run a repair on the NOR-RIO software and look at MAX to see if you have RIO 12.1 or 13.0.

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• Signals and Slots

  Try to test something after that someone wanted to help with the signals and Slots sorta. I know there is an alternative to this, but I'm trying to understand why this does not work when doing it this way.  It relies, it works but it does not fly... I mean this isn't the trigger of the SLOT feature... Not even sure if she sends a SIGNAL...

  Thanks in advance.

  file:

  // Default empty project template
  #ifndef Testme_HPP_
  #define Testme_HPP_
  
  #include 
  
  namespace bb { namespace cascades { class Application; }}
  namespace bb { namespace cascades { class TouchEvent; }}
  namespace bb { namespace cascades { class Container; }}
  namespace bb { namespace cascades { class ImageView; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class Testme : public QObject
  {
      Q_OBJECT
  public:
      Testme(bb::cascades::Application *app);
      virtual ~Testme() {}
  public slots:
      void handleTouch(bb::cascades::TouchEvent* tEvent);
  private:
      bb::cascades::Container* rootContainer;
      bb::cascades::ImageView* imgView;
  };
  
  #endif /* Testme_HPP_ */
  

  .cpp file:

  // Default empty project template
  #include "Testme.hpp"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  
  Testme::Testme(bb::cascades::Application *app)
  : QObject(app)
  {
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      QmlDocument *qml2 = QmlDocument::create("asset:///Testingme.qml").parent(this);
  
      // create root object for the UI
      AbstractPane *root = qml->createRootObject();
      // set created root object as a scene
      app->setScene(root);
  
      if (!qml2->hasErrors()) {
          rootContainer = qml2->createRootObject();
  
          if (rootContainer) {
              imgView = rootContainer->findChild("imgView");
  
              if (imgView) {
                  bool res = QObject::connect(imgView,                                        SIGNAL(touch(bb::cascades::TouchEvent*)),
                          this, SLOT(handleTouch(bb::cascades::TouchEvent*)));
                  Q_ASSERT(res);
                  Q_UNUSED(res);
                  fprintf(stderr, "Height: %f and width: %f\n",
                          imgView->preferredHeight(),                                        imgView->preferredWidth());
              } else {
                  fprintf(stderr, "No ImageView\n");
              }
          } else {
              fprintf(stderr, "No root container\n");
          }
      } else {
          fprintf(stderr, "QML2 has errors\n");
      }
  }
  
  void Testme::handleTouch(TouchEvent *tEvent)
  {
      fprintf(stderr, "Touch Touch Touch\n");
  }
  

  hand file. QML:

  // Default empty project template
  import bb.cascades 1.0
  
  // creates one page with a label
  Page {
      Container {
          layout: StackLayout {}
          Label {
              text: qsTr("Hello World")
          }
  
          Testingme {
              id: testingMe
          }
      }
  }
  

  File Testingme.QML:

  import bb.cascades 1.0
  
  Container {
      objectName: "rootContainer"
      horizontalAlignment: HorizontalAlignment.Center
      verticalAlignment: VerticalAlignment.Center
      background: Color.create ("#262626")
  
      ImageView {
          objectName: "imgView"
          imageSource: "asset:///belligerent.png"
          preferredHeight: 200
          preferredWidth: 200
      }
  }
  

  The main file is the one you get when you create a new project of Cascades Standard default. So, what's wrong with this picture? Or of images, other than the fact that I use the png of bellicose blocks file...

  -Edit (this and some formatting).

  I'm using the Simulator, so don't know if it would make a difference. BTW, I even tried to use a checkbox, and which does not trigger anything.

  Well, it works eventually got. I'm still not sure where to check signals during debugging, however.

  Although there are two files QML, the first main QML object is one that should be used. I used the 2nd QML file object that was wrong, even if the image is in the 2nd...

• dynamically change the targeted and untargeted application icons

  Hi all

  In JDE 4.7.0, can I dynamically change icon application targeted and untargeted.

  My application connects to a server once a week and draws new content and 2 new icons.

  Can I use the icons drawn recently to replace the existing icons.

  Thank you.

  My glance, you have codes is about right.  Note that you will need to provide the images you downloaded as Bitmaps.  There are a number of discussions on this Forum dealing with requirements to download the files and convert them to Bitmaps, so have a look round for help with that.

• All share storage iscsi connect same target and volume

  Hi Alls,

  I have openfiler and do 1 iscsi volume share in two ESX hosts with even described as iscsi target.

  So a (first) ESX have dynamic config discover iscsi target and the format of finishing, so ESX block size have new data store come from iscsi.

  Another ESX must sign in with the same ip address of the iscsi target and even target iqn. then discover iscsi and rescan datastore have see the name of name identical to that found on ESX first data store.

  (Note for second ESX is not block format size but rescan HBAS/VMSF found eponymous store data like first ESX)

  Issue.

  1. for iscsi target that have one objective and correspond to a volume on openfiler can operate with 2 ESXs at the same time with the same target?

  2 if not, how to configure shared storage with openfiler that can used data volume on openfiler?

  Kind regards

  Bancha

  Like I said before, vMotion can saturate an uplink, so you will need to keep an eye on it. If you want to perform vMotion on the same vSwitch anyway, I suggest you create a group of separate ports with private IP (e.g. 192.168.x.y) addresses for her and let the two active vmnic for this group of ports allow failover in the event of an uplink failure.

  André

• Edge Animate: Detect if the 5 elements are dropped on their targets and display a message "Bravo."

  I was hopgin this would be pretty simple, but must still find a way to do it, or a tutorial that covers online.

  I initially followed the tutorial video of Paul Trani for drag / drop objects on a target, which is really userful, ()Drag and Drop in edge animate part 2: Multiple with Touch - YouTube)

  Now, I want to add code to detect the moment where all points are interrupted on their targets, and then show a simple "well done" text or graphics. That I had a post on StackOverFlow for about a year now without a valid answer.

  Thanks Resdesign, it is more useful

• The backup of Duplication without a target and recovery catalog connection-oriented

  Hello
  We need restore a database - it's now my idea of using replication backup without a target and recovery catalog connection-oriented (I don't want to disturb the source database and we do not use a recovery catalog).
  Backups are stored on tapes (by Omniback from HP).
  
  The syntax should be like this:
  
  duplicated to dup_db database
  until ' to_date (May 2, 2012 02:00, ' ' the HH24: MI: SS DD/MM/YYYY).
  SPFile
  location of backup '?
  nofilenamecheck;
  
  We must use the backup from May 2, 2012 - so it's my understanding that we need to use the clause "until" to_date (May 2, 2012 02:00, ' ' JJ/MM/AAAA HH24:MI:SS) "."
  
  But because the backup is located on the Strip I do not know the value of "backup location. I thought that the name of Omniback backup could be used, but that has not worked.
  
  Now my questions are:
  -is it possible to restore a database as shown with the option-double?
  - and does the job "until" in this case?
  
  Any help will be appreciated.
  
  Rgds
  JH

  Hello

  Unfortunately, you forgot to say which version of the database, it has a double option without a recovery catalog and without connection to the main DB was introduced with 11.2 (if 11.2.0.2).

  And as you can see here:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm

  you need a backup of disk based to use it.

  "A location of disk backup that contains all backups or copies for reproduction must be available for the destination host".

  Concerning
  Sebastian

• Target and maximum bit rate...

  Not finding much info on target and Maximum bitrate that is under video settings during export > Media.

  At the highest quality, my camcorder records to about 24 Mbps.

  I export to Youtube. I know that all of the settings to use.

  
  I wonder if I should choose the bitrate at which it was recorded, for my target and maximum.

  I am aware that higher the value, the larger the file is large.

  What are your thoughts?

  On another note. My HD camcorder JVC GZ-HM300, manual stipulates that all class 4 or higher SDHC card will work.

  I see some of the higher ranked cards higher bit rate transfer.

  Do I need to get at least a transfer rate of 24 Mbit/sec SDHC to get all the benefits of the record of 24 Mbps bit depth.

  Because I have got a standard 16GB class 4 Kodak SDHC for $20 Meijer's, here in Michigan (Meijer is pretty much just like Wal-Mart)

  http://www.Meijer.com/s/Kodak-16GB-class-2-SDHC-memory-card/_/R-187776

  Said description class 2, but he of the symbol of class 4 and works with my camcorder.

  What are your thoughts?

  A larger file or a less compressed file or a file with high throughput (those that are functionally equivalent) does not necessarily mean a more beautiful once downloaded video. In practice, a video that has the best eyesight will be better once YouTube through the ringer. My additions in 1080 p YouTube typically hover in the range of 10-12 Mbps, but they tend to be low movement videos, so they provide a compression well. If you have an animated video, it may be necessary to crank the bitrate up to what you keep most or at least more of the fidelity of the image. However, you will get to a point where you will just make an unnecessarily large file, with no perceptible difference as soon as YouTube do its dance on your video. I would guess that 25Mbps is unnecessarily high; the recommendation to use 15Mbps or thereabouts is probably sufficient. Test is the only way to know, as there are has no strict rules when it comes to video coding - and YouTube accepts all the accepted general practice and pouring them on their head.

  Re: target and the maximum flow: these come into play when using coders who use encoding variable bit rate (VBR). Rate target - as its name suggests - is the rate you want the encoder to pull to and use as an average relative. Flow binary maximum - no points for guessing - is the largest flow you'll let the encoder use in segments (usually in divisions called GOP or groups of images) where there is movement or a visual complexity (very detailed models, or fog, for example). If the encoder were to run full tilt boogie, the maximum bit rate would determine the size of the file; It is roughly equivalent to the use of the CBR or constant bit rate encoding. However, because you have selected a target bit rate (in general, a minimum below the maximum bit rate), the encoder will try to maintain this bitrate or lower throughout the video. For example, my 1080 h.264 encode for YouTube usually have a maximum rate of 15Mbps all about, but I put the target at 10 Mbps or less. Using 2-pass VBR, and given the nature of the videos I encode more often, my files usually average around 6 Mbps. That's what I have to deal with each separate code as its own entity - you can apply some principles, but in practice, anything goes.

  These Wikipedia articles could offer interesting ideas in different encoding, at least from a perspective of bitrate methods:

  Variable flow

  Constant flow

  Average throughput

  PS: No WAY is Meijer as Wal - Mart The Mitt, reprazent!

• Can not see half of my 'target' and 'Title drop-down' on own. Group of experts

  Half of my popup panel is grayed out.  I see that half of the drop target and the title and nothing of what lies to the right.  I'm unable to click and access the menu drop down.  I tried to restart DW and even move the properties panel.

  Should I reinstall DW?

  Hello

  This faq can help - http://forums.adobe.com/thread/446724.

  PZ

• Difference between ' target / "and"target SYS/change_on_install@PROD ".

  Hi all
  
  Please let me know the difference between the two commands to rman
  
  rman/rman@CATALOG target $ rman catalog.
  
  and
  
  $ rman catalog rman/rman@CATALOG target SYS/change_on_install@PROD
  
  and
  
  rman target $ /.
  
  and
  
  target of $ rman nocatalog /.
  
  It comes to the recovery Site and the commands work properly.
  
  Thanks in advance.
  
  Kind regards
  Bikram
  
  Published by: user11977214 on June 15, 2010 23:53

  Could you please specify what's that I use
  $ rman auxiliary sys/change_on_install@PROD

  then it will directly connect to the auxiliary or the database target (i.e. PROD) this means that it will bypass the catalog database and will use the target database control file.

  It will bypass the catalogue (nocatalog option uses) and connects to the auxiliary database. Auxiliary database is used to create a clone or standby database

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38

• After my last update to Vista, my usb and slot for cf card readers were not mapped. I need to access. Difficulty?

  I updated Vista Friday, 11/09/2011 with KB2533523, KB2468871 and KB2310138.  After the update, I lost my backup drive Seagate mapping and my maxtor drive and card slots on the front of the desktop computer.  Tried running the fixit Center and it crashed.  I can still get to my CF card of the Canon camera via USB connection software - is not acceptable.

  Hello

  I would say you can place the computer in a clean boot state and then try to install the updates that to and check if it helps.

  Note: after the installation of each update to restart the computer, so that we can confirm which updates is causing the problem.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual

  Hope the information is useful.

• QNX IDE target | Target and binary selected do not correspond to x 86

  I followed the guides and installed native Blackberry Playbook SDK and Simulator!

  However when I specify a target for my project I get the erro 'Selected binary and target do not match x 86. "

  Here is a screenshot:
  

  Someone at - it had the same problem?

  I am runing Windwos 7 64 bit, but the Simulator and NDK installed fine on the system and theire AFAIK the two x 86...

  Thank you

  Hi, Miguel.

  A little trick to streamline your workflow: prospects for development C/C++ has a little "hammer" toolbar of action that you can pull down (click on the black triangle next to it) to define and build the active configuration in one step, for one or more projects.  The icon to the right (it looks a bit like a sundial) defines the active configuration, but is not build.

  HTH,

  Christian