Target is temporarily in the State pending state.

Similar Questions

• 11G Grid control - target is temporarily in the State pending state.

  Hello
  
  I use 11G SGD, where at one point that I see several target unknown with the message "target is temporarily in the State pending state."
  
  There are different databases running on different hosts show the same error.
  
  Thank you
  KSG

  KSG,

  You can try to get the status & loading/reloading, last download time & target monitored under commands on agent
  Have also check in/etc/hosts to the agent host must be in format below
  hostname nomhote.nomdomaine

  Check ping telnet for connectivity between the agent & SGD

  Console HTTP port: 7789
  Console HTTPS port: 7800
  Download HTTP port: 4890
  Download HTTPS port: 4900
  Agent port: 3872
  Repository port: 1521
  Central Console port Enterprise Manager = 4889
  Central Enterprise Manager Port Secure Console = 1159

  emctl status agent
  emctl upload
  emctl reload
  emctl config agent listtargets 
  

  Thank you
  Ajay more
  http://www.moreajays.com

• Recon Trusted reconciliation event and target advertising stuck in the State of data received

  Hello

  Approved AD recon target job running successfully, but events are stuck in the data received State-is not related to any user.

  It happens for a particular job only.

  Because most users are not the IOM. How to remedy this situation.

  Any help would be appreicated.

  Thank you

  Your error says that your storage space is full and is not able to extend the table space. u can try pls check-in
  IAMEXT_OIM. Table IDX_RECON_HISTORY or delete some data after backup?

• To run the State and asynchronous control pending...

  I have a VI that I call asynchronously.

  When I run it, I record the refnum for her and watch her status to see if it stops running. At some point, the asynchrounous VI will run the pending execution. How can I see by using the State of the VI property node. I assumed, apparently incorrectly, that when a Subvi is "waiting to run" that he would be in a State of execution other "Running". Is there something else I should be looking? What works here?

  I'd certainly prefer this solution rather than an alternative such as send a user or view event since it places no restriction on the Subvi (i.e. the subvis connector plan).

  Thank you!

  As I do this is to use asynchronous Start using the call and Collect Call option.  To say that if the VI has finished, I use a wait on node for asynchronous call with a short timeout - if he stopped (returned), then the wait will succeed without error, as if she is still underway, the wait will be timeout, throwing an error I can trap and clear.  My routine of waiting and then returns a Boolean to indicate whether the asynchronous routine is back.  If so, I can stop the asynchronous routine using a target Abort VI.

  In a fairly large project in real time, I had about 5-6 asynchronous 'loops' running in parallel, completely detached.  When I was ready to stop, I used a VIG who has been wired for their stop indicator.  In my hand, I then called the wait routine on all my routines in a loop until they call returned as "stopped", then I really 'arrested' them by calling the option "Stop" (Abort VI) on each of them.

  Bob Schor

• Windows 8 apps is not up-to-day, continue to show "Pending" when I look at the State of windows applications update 8

  Dear team,

  I use the laptop dell inspiron with windows operating system 8. Apps Windows 8 does not get updates, continue to show "Pending" when I look at the State of windows applications update 8, I haven't downloaded or installed all the other apps, but I'm trying to update the applications integrated Windows 8 came with the computer dell laptop. I have high speed internet. I installed McAfee total protection subscribed when the purchase of the laptop.
  Please help free for applications update of Windows 8.

  Finally, I found a solution. Go to troubleshooting (press win + w > then type troubleshooting). a window now opens in the office. Click on "solve problems with windows updates. Now click Next. Windows will search for solutions, but he can't find anything. Then, windows will ask if you want to try in administrator mode. Click Yes. Windows will find and fix the problem. That's all.

• The attention of the State - "Generated" Question, please help.

  Hello

  I wonder what that means the staus 'product' refers to in OWS case Managment.  If you have counted all the alerts that you would understand "generated" when totaling or is it just a group void of alerts?

  

  It's just the name of a workflow state. In a default installation of UX, it is the name of the State of workflow [only] in the "Sentry case Workflow. (You can check this by opening the relevant workflow by using the case management application.) Therefore, all cases will be in the State "Generated" as OWS. In this scenario, you use only the alerts management workflows ['False positive', 'True Match', 'pending', etc.]

  If you want to remove this from the report, you can change the filter apply only to the "alerts".

  Thank you

  Nick

• Can not get the States of relaxation for work in the widget of blank publication of Muse

  Hello

  I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

  I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

  Any help with this will be greatly appreciated!

  Tania

  

  Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

• Photoshop button in the State of the asset returns to normal after turning over?

  Hello

  I work on a site of reference glossary in Muse and have hit a roadblock with my buttons in photoshop.

  I created the menu buttons in Photoshop that have two different States - an asset and working capital and another for normal and down (the button is actually saved with four layers/States, one for each, but for what the user sees, it's really only two options). I used these menu buttons as triggers of reversal for blank publications, and when the user hovers over the button, the page name will appear below and then disappears in slowing (otherwise the names ecaple and it would look very crowded).

  The issue I found is that when I preview the page in my browser, the buttons seem to work properly as they appear in the active state, which indicates that the page they are linked is one they are on.

  Initial view - homepage:

  

  .. .and when I reversal of the image of the page that I am currently on, the button displays the name of the desired page, like so:

  

  However, when I have the deployment, the button goes back back to the normal/down state, even if I'm still on the home page.

  

  Here is a screenshot of the composition settings that I set up for this widget. I tried the target 'hide' switching to zero, but as the target refers to the word 'Home', the word 'Home' has remained visible and more button remains in the active state, which is not what I want. I also tried selecting "triggers on Top", but the problem was solved not here either.

  

  What Miss me? How can I make sure that my button remains in the active state when it is on it is linked to the page?

  Thanks for your help!

  Rachel

  Looks like a bug that is the impact of the meaning overloaded state 'active '. 'Active' is the State used for an article with an applied hyperlink that points to the current page (or an anchor point in the current scrolling range on the current page) and the State used for a trigger or a sticker in a widget of Composition or a slide show that matches one element current assets of the composition or the slide show.

  It seems that we honor the hyperlink definition of 'Assets' on the loading of the page for a composition trigger with a hyperlink to the applied current page, but not to honor this definition of active when the transition to having no element in the composition active (or when presumable to transition to another element of the composition is active).

  The only solution that comes to mind would be the approach very tedious to reproduce this widget of composition on each page, delete the hyperlink on the 'active' trigger and put shaped manually its 'Normal' State for Quicken.

  I wrote the bug. However, it cannot be corrected immediately. (We tend to collect small bugs in a box and then answer all at once or when other changes are planned in this area, because of the overhead involved in the ramp up to work on a surface and completely redone the test after changes).

• Change the State of account reconciliation

  Hi Experts,
  1.) how can I read the value of OST_STAUS in JAVA?
  2.) can I change the value of OST_STATUS by a reconciliation personalized on-demand job inorder to change account status. If Yes, then how? If not, is there any other method by which I can change the status of an account for an instance of the application?
  I use 11 GR 2.
  Thank you
  Subin

  Usually you'd send configured, enabled or disabled as the status, but I guess that it would accept as those appearing in your resource object called "Definition of the State:" tab

  Commissioning
  People with disabilities
  Revoked
  None
  Activated
  Loan
  Put into service
  Provide information
  Pending

  Don't forget to click on the profile of reconciliation create after any changes however.

  -Kevin

• Adobe Muse doesn't let me change the States of thumbnails in a lightbox.

  Muse doesn't let me change the States of thumbnails for my lightbox. The only thing that it is allowing me to do the right now is to change the opacity of each State. I would like to than the 'normal' State of my nail of the thumb to be a solid color, the "Rollover" State to reveal the image that is displayed in the Viewer, the State of "mouse down" to be another solid color and the 'active' State of being of the same color together as a 'normal' State I changed the color, and I even tried to fill it with a real image with a solid color file. Nothing will work - the State remains just to display the main images in the thumbnails. I would appreciate help! I don't understand why it won't work. States work for everything else.

  Hello

  With startup, if you add a picture as a thumbnail then it could appear as hero image.

  We cannot install according to States with the thumbnails of the images, any image or fill added to the would be added as a background image. You can change the image of the active panel, but still we can not install different images with the States.

  Better idea would be to use the composition where you can set up reports for the triggers and the images separate targets.

  Thank you

  Sanjit

• Create table statement will hang the State... in ODI... in the BI database

  Our development team is trying to create an external tabe in the database of another schema. ODI is to create the inside connection bridge. I don't know how. But whenever they get from this request, he'll hang on State. When in the same code works fine in a different database.
  
  Users whereby they are connceting to the source in the fire database this query have the same privileges.
  For a database, it works fine that the table is created in the target database and in the correct schema but for another, it doesn't work and hung... (not giving any results)
  
  Databases are used to the BI work and having almost the same configurations.
  I checked the view target database v$ session. It gives me < enq: PS - contention > event
  and three rows are back with < PX Deq: table Q narrow > event for others following two lines...
  
  is - can anyone shed some light on this? What should I do now. like killing the session blocking is not solve problems
  
  
  Here is an example of the executed query:
  
  CREATE TABLE SCHEMA_NAME. C$ _0ODS_JDE_F0004
  (C1_DTSY, C2_DTUCD1, C3_DTRT, C4_DTJOBN, C5_DTUPMJ_DT, C6_DTMRTY, C7_DTDL01, C8_DTPID,
  C9_DTMRCT, C10_DTLN2, C11_DTCNUM, C12_DTUSEQ, C13_DTUSER, C14_DTCDL, JRN_SUBSCRIBER, JRN_FLAG, JRN_DATE)
  EXTERNAL ORGANIZATION
  (TYPE oracle_datapump
  THE DEFAULT DIRECTORY DIR_SCHEMA_NAME
  LOCATION ("X58030417C$ _0ODS_JDE_F0004_1.EXP", ' X58030417C$ _0ODS_JDE_F0004_2.EXP ')
  )
  2 PARALLEL AS
  SELECT
  NVL (TRIM (F0004. (DTSY), ' ') C1_DTSY, NVL (TRIM (F0004. (DTUCD1), ' ') C2_DTUCD1, F0004. DTRT C3_DTRT,
  TRIM (F0004. C4_DTJOBN DTJOBN), J2DT (DTUPMJ, DTUPMT) C5_DTUPMJ_DT, NVL (TRIM (F0004. (DTMRTY), ' ') C6_DTMRTY;
  TRIM (F0004. DTDL01) C7_DTDL01, TRIM (F0004. DTPID) C8_DTPID, F0004. DTMRCT C9_DTMRCT, F0004. DTLN2 C10_DTLN2,
  F0004. DTCNUM C11_DTCNUM, F0004. DTUSEQ/10 C12_DTUSEQ, TRIM (F0004. C13_DTUSER DTUSER),
  F0004. DTCDL C14_DTCDL, ' ' AS JRN_SUBSCRIBER, 'I' AS JRN_FLAG, SYSDATE AS JRN_DATE
  OF SCHEMA_NAME. F0004 F0004 WHERE (1 = 1)
  
  -Best regards,.
  Saha

  scratched...

  -saha

• Create a link to a State... why the State lacks Ahh!

  Hello

  I spent 1/2 day, trying to get a button link to a State that seems to be missing the interaction > choose target > the Application menu.

  I hit the 20 State max limitation and I have to now use States within the custom/generic components... but now when I try to link to them with one button to another component this subreport is missing. Here is a diagram showing what I'm doing... and I have to hurt?

  

  So... is the first question possible to link a button in a subreport to a subreport to another component. Subreport is perhaps not the right word... but I mean a State within a component.

  Any help is greatly appreiated. Thank you.

  Thank you

  Nick

  I suppose you want the buttons in the control panel (i) drop down to post a link to any other product in the following state information?

  Here are the basic things I did to make it work.

  In Flash Catalyst, I added an interaction to change the State of the main application of 'Room01Products' on (i). The rest changes to the project when done in Flash Builder.

  Once properly imported into Flash Builder, I open the Mani.mxml file, and then find the Room01Prodcuts component (Yes there is a typo in the name in, as I've never done this) I then gave this element an id attribute:

  Then, I open the Room01PanScrollingContentSkin.mxml file. It is located in the directory of the project components.

  In this file, we will find the event handler for the (i) that we added in Flash Catalyst.

  You should see the following line of code:

  mx.core.FlexGlobals.topLevelApplication.currentState = 'Room01Products';

  Add this line of code:

  mx.core.FlexGlobals.topLevelApplication.productInfo.currentState = 'Product28';

  You will see reference us the productinfo component in code and define its currentState to 'Product28' I had him show something else than the first State of the component. Now when you click on the (i), it will change the two States concerning the application and one for the component.

  Hope this helps,

  Chris

• CSS to bind the States?

  Hi-

  I'm writing correct css and html/semantic markup to bind the States.

  My goal is to have not visited links appear with no underlining and I think the css rule is text-decoration none; However, while underscore disappears, so also made the link. I want the link to stay, but I don't want it to be pointed out. I don't know if my syntax is wrong in the external style sheet and the html doc. Any ideas? Thank you.

  In my sheet, I currently have:

  
  {.linkstate}
  color: Brown;
  text-decoration none;
  }

  Li {}
  margin left: 40px;
  list-style-type: none;
  line-height: 1.5em;
  }

  In my source html/semantics document, I currently have:

  < ul class = "linkstate" >
  < li > < a href = "#" > item 1 < /a > < /li >
  < li > < a href = "#" > item 2 < /a > < /li >
  < li > < a href = "#" > point 3 < /a > < /li >
  < /ul >

  Nothing wrong with the syntax. It's just how you apply it.

  To style links, you must use the Pseudo-classes on the tag (which you are not currently).

  a: link

  a: visited

  a: hover

  a: active

  {.linkstate}
  color: Brown;
  text-decoration none;
  }

  The above selector is OK to target a specific area on your page, but you must then style the links in this area using Pseudo-classes.

  . LINKSTATE has: link {(= a link not visited within an HTML element with a class attribute = "linkstate")

  color: Brown;

  text-decoration none;
  }

  . LINKSTATE a: visited

  . LINKSTATE a: hover

  . LINKSTATE a: active

  See

  http://www.Projectseven.com/Tutorials/CSS/Pseudoclasses/index.htm

• Shows incoming calls to the United States instead of the city and the State

  IiPhone 6plus, IOS 10.  Incoming calls from unknown number of shows in the United States instead of / the State of the city. How can I fix this. Thank you

  Settings > general > language and region > region = 'United States'... assuming that is where you are.

• What is the State of BGR-smoothing of fonts on El Captain / Sierra in July 2016

  What is the State East of smoothing of the fonts for the BGR screens in July 2016 with the latest OS - like OS X 10.11.5, El captain and the macOS later Sierra?

  Question: I'm about to buy a screen 4 K - 43 "BGR and I want to use anti-aliasing of fonts because the DPI is rather low. (under 110 ppi to 43 in.). However, OS X do not officially support police BGR, smoothing, at least, that's what people are saying. I have to wonder; This information is always accurate? OS x not supported BGR screens? And you can manually force the font smoothing?

  Potential solution, but it works? Because OS X is waiting for your RGB (red green blue) screen, and no BGR, some have suggested that you make rotate your screen 180 degrees. I doubt that it really works. Perhaps developers have disabled automatically smoothing fonts if rotate you 180 degrees. I can't verify if it's true.  So, my question remains: OS X supports screens BGR; and if not, Apple plans to release a fix for the BGR screens? Can I manually force anti-aliasing of fonts with the terminal; If I can use the hack of 180 degree rotation?

  LCD smoothing screen fonts is supported less 10.11. To allow him to spend

   > Preferences > General

  Check use LCD fonts smoothing when available.

  What of the Sierra, any information which is not made public by Apple should aim to developers forum or the feedback tool that we cannot discuss or speculate about it here.