Task list: marking of an addiction to the tasks

Similar Questions

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Why my PP CC 2014 application does not close when I scroll on the video thumbnails in my library or when I put the marker on an item in the timeline?

  Anyone had problems with PP CC 2014 closing app when they scroll over a video thumbnail in the library or when moving the marker on a video clip in the timeline. If I change my opinion of the library of thumbnails in the list, the problem doesn't happen, but the marker on a clip in the timeline still cause the app close. Any ideas?

  Update your video driver.

• List of places calendar appears behind the window

  Recently, when I create an event in the calendar v8.0 and start to get into a place, the list of proposed locations appears behind the window of the event, so I can't display the entries of the first on the list. No matter where the event is located on the page, and it comes up with new events or by updating an existing event. Any ideas?

  

  Jac answered my own question but the display if someone else has this problem.

  I use the calendar view to full screen. Toggle mode FS fixed the problem, and he has not returned when return to the FS mode.

  Accumulate points for that?

• Sections black in the list of bookmarks when you move the cursor over the list.

  When I click to open the list of bookmarks and then move the cursor to the list I have sections of the list blackened, although the position of the slider is not blackened fortunately.

  I tried uninstall and reload, firefox restart Firefox, but nothing seems to help.
  Help please.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Toolbar Yahoo appeared without my consent. Can't get rid of it. Does not appear in the list of Add-ons or in the list of the programs installed for uninstall. (Win7; (FFx5) Please help me remove this annoyance.)

  I was asked to update Java. I had a YAHOO toolbar I made and do not want to. I can't get rid of it. It does not appear on the list of Add-ons, not in the list of programs (for uninstall). Could not find anything with Yahoo in the name. I don't want to use the view, as he returns to the display without my consent - I want not gone permanently.

  The Yahoo uninstall instructions help call for, click on the pencil tool (which tool is not found on this toolbar). Firefox instructions say go to the list of Add-ons, but the Yahoo bar is not there. There are several modules of Java, but I don't know what they are and what happens if they are uninstalled.

  Win 7; Firefox 5.0. Yahoo toolbar worm 2.3.8.20110620112826

  Maybe he is disguised as something else. If so please tell me what you need to uninstall.

  Open Firefox-> go in the Menu Tools-> Add-ons-> Extension section-> remove any add-on suspicious you-> restart Firefox

  If above solution doesn't work, try the following.

  Open Firefox-> go to Menu view-> toolbars-> UNCHECK any suspicious entry toolbar.

  Check if it works.

• To sort the list of files by time not the file name.

  Original title: created the new toolbar on the sort option for changing the taskbar.

  I created a new toolbar on the taskbar, and it is directed to a folder in my network. When I click the new button on the toolbar, it opens subfolders sorted by filemane. Then, open the sufolders with files sorted by filemane.

  I want to sort the list of files per hour not the file name. is it possible to change this?

  Here's what I did.

  I right click on the taskbar - selected toolbars - selected new toolbar - selected the folder on my network.

  When I click the double chevron right the new toolbar button, it opens the files in this folder, and then I select a subfolder and an another subfolder then the individual wave in this final folder files. There are more than 300 wave files in this folder. It sorts thenm by file name which is a randomly assigned file name by the used recording software. I want to sort the files by time instead of file name. is this possible?

  Hi Jeffrey,.

  How many computers are present in the network?

  You can follow this link & check id the issue persists:

  How to arrange files using folder views in Windows XP?

  Reference: The order of sorting files and folders whose names contain numerals is different in Windows Vista, Windows XP and Windows Server 2003, in Windows 2000

  Hope the helps of information.

• I have 4 Toolbars list. None of them offer the spelling corrector. where can I find a spell checker and how to settle?

  original title: spell checker

  I have 4 Toolbars list.  None of them offer the spelling corrector. where can I find a spell checker and how to settle?   Help please?

  If you are looking for a spell checker for Internet Explorer, try this one. It sits on the IE toolbar, so there is no need for more mess.
   
  ieSpell
  http://www.download.com/ieSpell/3000-12512_4-10208550.html

• PC Tools Performance Toolkit, removed from the list of programs recently used in the Start Menu and a new one is born not more

  I used the destructor of the demo feature PC Tools Performance Toolkit allows you to delete a directory that I couldn't take off any other way. At the same time used a few other functionlities software to clean my computer, the software promised to improve the performance of my computer (Vista). Then I discovered that the software deleted the list of programs recently used in the start which was not desirable. Now there is a list of recently used programs, and a new one is created either. How can I get the list to create again?

  Hello

  It is not recommended to use any cleaners/tune Up all registry program on modern operating systems.

  And they can do more harm to your any good operating system that they claim to be able to do.

  See if that helps you.

  Do a system restore, if necessary using the safe, before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Or follow this path:

  "Use the System File Checker tool to fix the files of system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  If SFC is erors that it cannot repair, you may need to do a repair upgrade installation.

  But, to a Microsoft Vista DVD, not the valorization of the disc manufacturer.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
  I hope this helps.

• Smartphones blackBerry Mark message as READ on the device after reading in Exchange

  After being a user of Windows Mobile for years and many devices, I stepped and passed to the tower. There are things that I love most about it and some of the things that I miss terribly. One of the things I miss is having read a message in Outlook, I don't want to be marked as read on the device.  The only way I can get it to work is to choose "Reconcile now" on the device and then all syncs well.  The weird part is that if I read something on the device, it will be immediately marked as read in Outlook without having to choose "Reconcile now".  I've seen a few posts about this, but none that really explain why it would be designed that way.  I hope there is something I can do or can I have my team do to fix.

  Here are some details of my configuration:

  • Using BES to the corporate network.  I don't know what version of BES we use, but I know that this isn't the last, because we don't get emails in HTML format.  We are about 4.4 or 4.5 and soon (as soon as I make a problem out of it) will be upgrading to the most recent which I HOPE will be changed.
  • OPTIONS/EMAIL MESSAGE RECONCILIATION: Reconcile wireless is enabled.

  Hoping that someone knows something or can explain why it would be designed like that.  There must be a good reason.

  Hi and welcome to the Forums!

  Under BES, you should be getting full reconciliation of read/two-way state - if you read on the device, it must mark it as read on the server (and Outlook). Similarly the other way around. There will be no instant - there may be delays, especially if you use Outlook in set mode cached... but I didn't have a delay that became so long the point of being problematic.

  If this does not work, you will need to get with your admins BES that something is wrong... and they are in control of it.

  Good luck and let us know how it goes!

• List of connection AnyConnect adds automatically the name of firewall internal

  I have a problem with running on our ASA5512 AnyConnect. The client adds the internal name of the firewall to the list of connection and makes it the default connection. When a user opens AnyConnect, they expect to try to contact the site asa5512 to expire before you change the selection to connect to.

  I tried to edit the files XML VPN-Users_client_profile and preferences_global in C:\ProgramData without result. I don't see the name of the firewall specified in any other file.

  When a user selects a server given in the drop-down list, it updates a local preferences file (by default, on windows) to:

  C:\Users\%username%\AppData\Local\Cisco\Cisco AnyConnect secure mobility Client\preferences.xml

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.

• The list of audio devices connected to the operating system has been changed

  Hello, I have a problem with rendering in Media Encoder CC. When I realized the video suddenly a message "THE LIST OF audio devices connected to the operating system was changed. Open Audio hardware preferences? "and rendering are collapsed by increasing the time until infinity.

  Any suggestion?

  Thank you very much.

  

  

  [Moved the Forum of the SOUL of the After Effects - MOD forum]

  Hmmm.  It's very strange.  For the experience, I tried to disconnect a sound card, while the SOUL is coding.  I get the message dialog box, but the encoding continues without stopping.  Eventually, this may be specific to certain sound cards.  What is your sound card that you have on your computer?

  For a workaround, could you try checking the "do not show again" checkbox in the message dialog box next time you see it?  Then, click no you should not see this message again and I hope that this problem would disappear.

• Marking 'ins' and 'out' to the Source, cutting footage of Timeline

  Hello

  I have a new error (since last week) that I've never seen before.  Whenever I have score a 'in' or 'out' in the Source window, it removes an element of my calendar.  I done all remediation work such as: updates, restart, attempt to erase 'ins' and 'outputs', trying to clear the markers (btw... those erasing options are grayed out, as if the Source window is not aware that the 'out' "ins" or markers are present).  Curiously, this error happens not all the time... but when it does, I'm dead in the water.  I find that if I reboot I can start cutting again, for a while, then it starts to glitch.  I'm practicing between GoPro and Canon sequences.   In addition, there is another thing that happens... When I type 'i' in the Source, the previously marked 'in' and 'out' of the Source makes this oddity as illustrated in the chiselled below image.  With the help of Windows 10 Pro - 2015.3 CC PP - 64 bit OS.  Any ideas?  Thank you!

  

  I see where you're going with this... I do it together.  Thank you.  I understand now. It now seems back to normal!