Task on the lens!   D:

Similar Questions

• Reflections on the lens for iPhone

  HHey guy

  IM thinking of buying a new lens of ollioclip 4-in-1 for my iPhone 5s. So I just want to know your opinion about that. Is it really worth? and will really give me amazing pictures?

  PS - I'm not pro-photographer. But, again, I want to take take pictures on my iPhone.

  Help me guys here.

  Thank you.

  Pictures are taken by the photographer, not the goal. The lens will help with technical aspects. Take good pictures now? If so, better lenses you can of your pictures a little better. But, if you can already take good pictures, working on that, rather than spending money on more gadgets.

• Last update of firefox has disappeared from my bar of task and the toolbar when on the internet. How should I do?

  After the last update of firefox toolbar at the top of the screen and the taskbar at the bottom of the screen no longer appear. How can I get back them?

  Wingfield said

  After the last update of firefox toolbar at the top of the screen and the taskbar at the bottom of the screen no longer appear. How can I get back them?

  I solved this problem by clicking the 3 horizontal bars (open the Menu) at the top right of the screen, then clicking on "Menu bar" in the options presented. All of a sudden my bar of task and the toolbar appears on the screen and remained.

• My "Task Scheduler" will not display the running tasks since the update to Firefox yesterday.

  When I use my task scheduler and select "Display all running tasks", I get "unavailable". The task successfully registered last history was immediately before moving to Firefox 23. What you've done!

  I uninstalled Firefox and installed after a reboot, and now everything works again with 23 installed Firefox. The real shame is that most users don't even know enough to even check their planner of tasks or the event viewer for the problems.

• When I open the camera back, there is a small point on the screen. Tjere is no visible scratches on the lens of the camera at the back. There is a scratch on the lens behind the protective glass?

  When the main unit is opened, a little tiny dot appears in the same place on the screen each time at and clicked too photos. There is no visible scratches on the lens of the camera. Could there be one on the lens within the lens glass on top?

  Consider Apple & will replace your unit with a new one if your unit is under warranty

• dust particles SE iPhone under the lens of the camera back

  Hi all

  I have my iPhone IS for about 5 days now and 2 days ago, I've already noticed a few dust particles under the lens of the camera back.  Went to 2 and yesterdays Apple store or 3 units of demonstration of different colors were particles of dust under the lens too.  I want to just ask if anyone of you guys this?

  You would need to take it to an Apple store, to do clean out or replace. Don't try to clean it yourself.

• Tecra S5 - 3 tasks in the center of my monitor that cannot be erased

  Hello... I have a problem, there are 3 tasks in the center of my monitor that cannot be erased.
  The spots are there only when a computer is turned on.

  [http://i496.photobucket.com/albums/rr326/sdtpantera/IMG_5917.jpg]

  Here is a link to a picture of dots on the screen.

  Please help... Thank you!

  Hi also

  Something is visible on the photo, but it will be interesting to see what it looks like in real life.
  Anyway, I don't think there is something that you can about it. Try contacting the service and show it to the technicians.
  I hope they can tell you what you can do.
  In the worst case the display much be replaced. :(

• Do you know how to copy certain tasks in the calendar and the past on different days?

  Do you know how to copy certain tasks in the calendar and the past on different days?

  This year, I even tasks to every month, so it is difficult for me to create new tasks for the same information. I can't find how to copy beyond the tasks, so if someone could help me I aprecciate it.

  Thanks in advance!

  Select, press COMMAND = C to copy it to the Clipboard; Select the date that you want a copy with the mouse, them press COMMAND\-V to paste. If you want a repetitive task, you can select the item and double-click it to open it, and then the pop up config, select repeat.

• Why does take so long to clear a task (with the DMA transfer) using the PXI bus?

  I am migrating from a system that has the habit of using a PCI-6133 (8 channels HAVE simultaneous) and PCI-6733 (8 channels AO) to one that uses a PXI-6133 and PXI-6733 mounted in a PXI-1033 chassis.

  In general, things seem to be working (synchronized I / AO to run near the maximum speed on both devices), with the exception that the compensation an AO task on the PXI-6733 takes always (the order of 20-30 seconds).

  Even when I try the generation of the sine wave for the PXI-6733 in MAX test Panel, it takes the same amount of time to stop the task. If I switch to the use of interrupts as transfer mechanism, it stops immediately.

  I tried to use the transfer mechanism of interruption on my more demanding set of synchronized tasks, but that does not produce good behavior (even if he doesn't give any errors).

  Is there a trick (or the best diagnosis) to help get my tasks working with DMA under PXI that worked very well on PCI?

  Thanks in advance!

  Thank you, Patrick. I tried on another computer (Dell T5400) and everything worked as expected. I think that the problems I have experienced on the first computer were due to a conflict with a PXI driver for another card I have not installed during my tests (and which I did not know was PXI, but he appeared as a PXI device in M & A once I put it in it should have a kind of PCI - PXI bridge internal?). So ultimately, pure card / slot / pilot shenanigans and everything seems to be fine now.

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• Is it possible to use the internal clock for meter tasks in the buffer?

  Hello

  Hardware: USB term mass 6251

  Software: LabView 2011 SP1

  I need to measure the angular lever position and speed of a carpet. For that I use two quadrature encoders. To accurately calculate the speed I use buffered from the measures of position using one of the available onboard counters. I understand that for this technique, I provide a sample for the meter clock. I wonder if it is possible to use the internal time base. Note that both of my counters are used so I can't generate a signal to clock with them.

  I found two conflicting pages related to my problem:

  1) http://digital.ni.com/public.nsf/allkb/EA7FFFEAFC3E1D85862572F700699530

  2) http://digital.ni.com/public.nsf/allkb/775290A3121D1FFC862577140074D3B3

  The first says that I can use the internal clock of 100 kHz, and the other says that I have an external clock.

  Comments/solutions?

  Javad

  Hi Javad,

  On your specific device, there is not a direct route from the time base of 100 kHz for the meter (according to the routing table of MAX):

  

  Yellow cell indicates that a route is possible but there is not direct (the "gate" terminal is used as sample clock for counters of the M series).  Mouse on the cell reveals yellow that make this route really requires the use of a counter (so it is not suitable for your application).

  On the line above "100kHzTimebase" you will notice it is called 'FrequencyOutput', which does not have a direct route to the door.  This would be the way to go if you want to route 100 kHz (or some other frequency) as your sample counter clock - you can set it up the same way to a standard meter output task:

  

  The output frequency doesn't have that many features like a meter output, but it is able to generate a continuous stable frequency.  There are only 32 different frequencies that can be generated using Freq Out on the 6251:

  {10 MHz, 100 kHz} / {01:16}

  Do not forget that the resolution of your measure of frequency by using this method will be equal to how many times you update the measure (hopefully, that makes sense).  In other words, if at the end of all the 1 second, you take the total number of charges since the last second, you would have a 1 per second equal resolution change in the number.  If you take the difference twice per second, you would end up with half the resolution.  You will be sampling the account register fairly quickly, but you will need only to do the calculation of the frequency after that all N samples in order to obtain a significant number.

  Another method that will certainly give a higher resolution in less time at typical speeds of coders is to set up a measurement of the frequency (the counter will count the internal 80 MHz base time period your external signal and the pilot calculates the frequency based on the result).  This method uses only a single entry - so you can just feed the 'A' your encoder quadrature signal (the method will not work if you are interested in absolute position or direction).  Without using signals A and B together, you will be susceptible to noise (which is common to have a quadrature encoder) that you want to delete (perhaps by setting up a digital filter).  Finally, you want to set a reasonable timeout on your reader calls (which will be blocked until a period of your external signal occurs), and the error-200284 handle simply report "0Hz" to make sure that your program is still sensitive even without an external signal present.

  Best regards

• Custom scale does not work in the task of the accelerometer

  I use a NI 9234 to measure acceleration. In the task of the acceleration, I set the sensitivity 1000 mV/g, and I try to use a custom scale to correct the actual sensitivity of the accelerometer (~10mV/g). The excitement is the internal value and 2mA. The input is AC coupled. When I run the task, the scale has no effect on the output values. With 1 G asked the accelerometer, the output remains ~.014G(pk) as a custom scale is used or not. This is normal behavior for a task of accelerometer?

  LabVIEW 2009 SP1

  NOR-DAQ v9.1.1

  
  

• Will be performing tasks VISA with a data acquisition (Dev1) in a VI block tasks with the second DAQ (Dev2) VISA in a second VI?

  Hi all

  I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008).  The second loop a set of writing with device 2 (another NI USB-6008) tasks.  2 VI has a massively slower than VI 1 time scale, which means that it must run in a separate loop.  Otherwise, VI 2 was created by copying and modifying 1 VI and variable names actions with him (though not, for example, global variables).  The two screws are meant to run at the same time on the same PC.

  However, if VI 1 is running at the same time as VI 2, any read operations or in writing to 1 VI 1 device are executed - but the VISA read and write operations to a serial device work.  When VI 2, all VI 1 functions work fine.

  Although I configured channels for tasks using the GUI DAQmx, I execute tasks using reading DAQmx write commands and have correctly defined the task 'create' and 'stop the task' live out the beginning and the end of my loop, respectively.

  Does anyone have suggestions for what could be the cause?  My thoughts so far:

  a. maybe it's some conflicts in the names of variables in memory between the two screws?

  b. LabVIEW for some reason any cannot read and write two devices on two separate screws?

  should c. I avoid to use DAQmx to configure these tasks (a sort of memory)?

  I know I can make it work if I have all together in a single massive VI, but for my application, it is much easier and better to do them in two separate screws.

  Thank you in advance for your help!

  In case anyone wondered, I found the solution:

  When I copied the original code for a new VI, it turns out that the structures of loop timed in the new VI had the same object name in the delivery structure of LabVIEW as timed in the original VI loop structures.  This prevents effectively regardless of the VI was executed the second execution of the timed loop.  (The serial number read/write suite to work because he was in a different timed loop.)

  I found this error when I ran the VI in execution of highlight mode and noticed that the output of 'error' on the timed loop flashed.  When I plugged it on my error stream, I found error-808, which explains the above problem.

  I have it set by right-clicking on the timed loop, change to a while loop, then change to a timed loop and plug the broken wires.  LabVIEW gave the new timed loop object a new name, and all was well in the universe.

• Restarting a task for the acquisition of data inside a For loop

  Hello

  I need iterate through my acquisition of data. Currently, I'm doing this through the creation, implementation and tasks for the acquisition of data inside a loop For which is iterated according to the needs of compensation. Unfortunately, the creation of these DAQ tasks slow down my code.

  I would like to be able to create the tasks outside the loop, pass them in and revive the tasks at the beginning of each iteration. Is there an easy way to do this?

  Otherwise, is there a way to make the standard DAQmx digital startup trigger trigger several times (so that it starts each pulse data acquisition in a long pulse rather than just the first pulse train)?

  Thank you!

  -Evan

  I whent before and created this example for you (and many others.)

  

• DAQmx: Outputs digital multiple tasks for the same card using the on-board clock

  I have a PCI - 6259 DAQ I'm programming with DAQmx. I want to create two tasks of digital output on the same card. A single task using on-board clock, continuous samples. The other task uses an onboard clock, finished samples and an external trigger with trigger Start.Retriggerable property = TRUE. Is this possible with my hardware and DAQmx? There will be a conflict if two tasks use the same clock source?

  This is not possible, you can have only one task timed materially by device.

  Best regards