TCP between Labview 6.1 and 8.5

Similar Questions

• TCP data labview n/b and c ++

  Hello

  I am trying to establish connection TCP LABVIEW n/b and program C++. Server is established in C++, while the client is implemented in labview. Even if the connection is established with customer success and the b/w Server, both are unable to correctly understand send/receive data between them. For example if I want to send a send_array of type int to the server, I use the 'send' like that standard WINSOCK function:

  Send (AcceptSocket,(Char*) send_array, 129 * 4, 0);

  but when this table was made by the client in labview, it shows unexpected values. As a customer, I used 'data simple client.vi' with a change as Envoy (129 * 4 bytes) data size has been set, only TCP read has been used.

  Same problem exists if I send data from client to server.

  Kindly help me

  Best regards

  It's probably a problem of edian big/small. If you use the flatten/Unflatten of string functions, you can specify which one to use.

• Need help to make the adjustments to TCP between Labview 2011 and webrelay

  Hello

  I'm using Labview 2011 and trying to establish communication with webrelay (X-WR-4R1-l) to control its relay.

  I downloaded a www.ni.com example but it does not work.  (he was tied with this thread as well)

  I did no changes in the example program, that I do not really understand much codes XML.

  I turned ON all 4 relays this webrelay, but in labview, it reads that the relays are turned OFF.

  and when I click the button on the front panel, it does nothing.

  There are several toolkits labview installed in my PC, namely:

  -labview development system

  -application builder

  -recording of data and control module

  -Database connectivity kit

  -internet Toolbox

  -report generation toolkit for Microsoft office

  I'd appreciate it if someone could guide me in this configuration process.

  Thank you

  OK, we're making progress...

  Something seems truncated. Is there something after realy4state in the received string? Because the string is longer, you will need to adjust the number of bytes read. It's more than the 157, which corresponds to the current setting.

  In all cases, their example LabVIEW is a unique feature of relay. You need to look at section 3.2 of the manual that you set for the correct orders. Now there is always a number between 'relay' and 'State' for example:

  1State = 1 for relay activate relay 1.

  You must do two things:

  Write a trainer who composed the correct channels based on the selected relay.

  Write a parser that retrieves the status of all four relays relay. (the offsets will be different, for example)

  I recommend you to treat the four relays as an array of four Boolean values.

• What is the differene between labview 6.1 and 2009

  someone is selling labview 6.1 without opening it first of all, I was wondering if it was legal and whether he would be completely obsolete.

  It's pretty much going to be obsolete.  You would have to use the old drivers and some current hardware will not be supported.  Also, it doesn't officially work on operating systems later (although I had it works great under Vista - haven't tried Windows7 yet).

  The differencesare too many to name.  Only, I come back and use it to support very old code. I'm now down to only a customer that still has their software in there and I don't have to do anything for them in a couple of years now.

  If you want to play with it, it might be worth if purchase is $100 or $200 dollars if you try to teach you or whether you want to carry out the full investment for the current version.  If they charge more than that, it's a scam and they are hoping to find someone who absolutely must have 6.1 and is willing to pay for it.

• Interface between LabVIEW and c#

  Hello

  IAM trying to send data to Labview via ithernet in a product that already have in c# .net. This means that data send LabVIEW must be posted in c#. Thus the Labview will act as the server and the product in c# will be serving the customer. I have serached in the forums to make the connection between Labview and c#. I saw a tutorial to make dlls in labview, in what they explained to hold tools > Build Application or shared Library.But I can't find in my tools although I version2009 of professional development.

  Can someone give me some instructions to send Labview data and display it in c#. IAM attaching the VI Server I made. The client in c# is a great product that has already done by others in c#. I have very less experience of programming in c#. Can someone give me some instructions or attach a few tutorials to make the connection between Labview and c#.

  
  

• Communication between Labview and Rn42 Bluetooth

  Hello

  I am currently working on a project that requires communication between a bluetooth equipment and my pc with bluetooth built-in. The bluetooth hardware is verfied working with Blueterm on android. However I'm unable to connect with my laptop blueterm. Is back a unabe to connect error. I use bluetooth vi without series or visa. This method is suggested? Thank you

  
  

• How to share a variable between the Mathscript Windows and a Mathscript node

  Hello

  I'm trying to share (just) a variable between the Mathscript Windows and a Mathscript node. I don't know why, but the use of the "global" Matlab function makes the mathscript node output formats change.

  I'm looking for a "Mathscript RT V9.0.1 module" as it may seem, there is. French technical support have some difficulty to find...

  Hi patrick33,.

  The code that you have attached should not report an error, so it seems that something has gone wrong with your installation of MathScript. My best guess is that it is the problem that is described in this knowledge base article. Your signature says that you use f3 patch, which is a good start. But the KB lists some other steps to take when you see errors about MathScript, impossible to compile. Can you try the procedure described in the article and let us know if that fixes the problem?

  Thank you

  jattas

  LabVIEW MathScript R & D

• Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

  Original title: cannot establish a network connection

  Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

  Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

  Diagnosis of IP Configuration
  Invalid IP address
  Info	Zero (0.0.0.0) detected IP address
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: reset the network connection
  action	Disabling the network card
  action	Activation of the card network
  Info	Successfully activated network adapter
  Info	Zero (0.0.0.0) detected IP address
  action	Repair Manual: Reboot modem
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  Info	Redirect the user to support call

  WinSock status
  Info	All base service provider entries are present in the Winsock Catalog.
  Info	Winsock Service providers strings are valid.
  Info	Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
  Info	Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info	Entry provider RSVP UDP Service Provider managed the loopback communication test.
  Info	Entry provider RSVP TCP Service Provider passed the loopback communication test.
  Info	Connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter
  Network location detection
  Info		Using the Internet connection at home
  Identification of network adapter
  Info	Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
  Info

  Ethernet connection selected

  State of the network adapter

  Info

  The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn

  FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  warn

  FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  error

  Could not make an HTTP connection.

  error

  Could not make an HTTPS connection.

  error

  Could not make an FTP connection.

  I found the problem (s), even if I am always left with a few questions.

  During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

  The solution:

  (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

  (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.

• LabVIEW 8.6 and LV RT 8.5?

  Hello

  I wonder if it is possible for LabVIEW 8.6 in interface with a target of desktop running LabVIEW RT 8.5? I'm having a problem with the interface between the two different versions of LabVIEW, at the present time, I'm unable to update desktop target to the new version of LabVIEW RT because a number of my students have not the new version of LabVIEW so that they must have LabVIEW RT 8.5 running on the target. I know it is possible to work on the labview 8.6 and save for the previous version of labview before you deploy it to the target, I wonder if it is possible to deploy the project directly without having to register for the previous version of LV

  Thank you

  The RT version on the target must match the version of the Module of RT on the host, or you will get an access denied error or incompatibility of Version or something like that.

• Site to Site VPN between Cisco ASA 5505 and Sonicwall TZ170

  I'm trying to implement a VPN site-to site between our data center and office.  The data center has a Cisco ASA 5505 and the Office has a Sonicwall TZ170.  I managed to configure the two so that the vpn connects.  Each of the firewall I ping the IP Address of the internet firewall on the other side and a desktop computer I can ping the IP Address of the firewall internal datacenter but I can't carry traffic between private subnets datacenter and desktop.  Can anyone help?

  The config below has had IPs/passwords has changed.

  External Datacenter: 1.1.1.4

  External office: 1.1.1.1

  Internal data center: 10.5.0.1/24

  Internal office: 10.10.0.1/24

  : Saved
  :
  ASA Version 8.2 (1)
  !
  hostname datacenterfirewall
  mydomain.tld domain name
  activate the password encrypted
  passwd encrypted
  names of
  name 10.10.0.0 OfficeNetwork
  10.5.0.0 DatacenterNetwork name
  !
  interface Vlan1
  nameif inside
  security-level 100
  10.5.0.1 IP address 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  1.1.1.4 IP address 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS server-group DefaultDNS
  buydomains.com domain name
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  inside_access_in list extended access permit icmp any one
  inside_access_in list extended access permitted tcp a whole
  inside_access_in list extended access udp allowed a whole
  inside_access_in of access allowed any ip an extended list
  outside_access_in list extended access permit icmp any one
  outside_access_in list extended access udp allowed any any eq isakmp
  IP DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp DatacenterNetwork 255.255.255.0 OfficeNetwork 255.255.255.0
  IP OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0 allow Access-list extended pixtosw
  pixtosw list extended access allow icmp OfficeNetwork 255.255.255.0 DatacenterNetwork 255.255.255.0
  outside_cryptomap_66.1 list of allowed ip extended access all OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 ip OfficeNetwork 255.255.255.0 allowed extended access list all
  outside_cryptomap_66.1 list extended access permit icmp any OfficeNetwork 255.255.255.0
  outside_cryptomap_66.1 list extended access allowed icmp OfficeNetwork 255.255.255.0 everything
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP verify reverse path to the outside interface
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Route inside 0.0.0.0 0.0.0.0 1.1.1.1 1
  Route OfficeNetwork 255.255.255.0 outside 1.1.1.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.5.0.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-aes-256 walthamoffice, esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto dynamic-map ciscopix 1 corresponds to the address outside_cryptomap_66.1
  Crypto dynamic-map ciscopix 1 transform-set walthamoffice
  Crypto dynamic-map ciscopix 1 the value reverse-road
  map dynmaptosw 66-isakmp ipsec crypto dynamic ciscopix
  dynmaptosw interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 13
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  lifetime 28800
  crypto ISAKMP policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 10.5.0.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 10.5.0.0 255.255.255.0 inside
  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd address 10.5.0.2 - 10.5.0.254 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 66.250.45.2 source outdoors
  NTP server 72.18.205.157 source outdoors
  NTP server 208.53.158.34 source outdoors
  WebVPN
  attributes of Group Policy DfltGrpPolicy
  VPN-idle-timeout no
  username admin password encrypted
  tunnel-group 1.1.1.1 type ipsec-l2l
  tunnel-group 1.1.1.1 ipsec-attributes
  pre-shared-key *.
  !
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  !
  context of prompt hostname
  Cryptochecksum:7f319172e5de9c0e550804a263f8e49e
  : end

  Mattew, obvious lack of education is the rule exempt from nat for your tunnel, your access list pixtosw is similar on this example, I assume that you have gone through this link, if it does not see the configs on both sides.

  Add the statement of rule sheep in asa and try again.

  NAT (inside) 0-list of access pixtosw

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml

  Concerning

• I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  Hello

  Main differences are:

  • Up to 12 hours of battery life with Powerbeats3, which use chips to W1 Apple energy-efficient (vs. up to 6 hours of battery life with Powerbeats2).
  • A quick charge of 5 minutes for a typical use of an hour (vs 15 minutes to load).
  • Improved ergonomic design.

  More information:

  http://www.Apple.com/shop/product/MNN02LL/A/powerbeats3-wireless-earphones-shock-Jaune

  http://www.beatsbydre.com/earphones/browse-earphones/wireless-earphones/ML8V2.ht ml

• How can I compare prices between iPhone Upgrade Program and refinancing?

  I wonder this for years, and it's how can I see how much is a new iPhone (say if I am refinancing a 6 s 16 GB iPhone), how much will cost each month and how much an iPhone cost in case of upgrade program. So if we are on the upgrade program, can OK, I buy it in the stores of carrier? What are the benefits of refinancing? Can I exchange a phone located to midway between the refinancing period and use the program to update iPhone and will I pay less each month? And after 12 months, what I have to pay the tax and the money to upgrade to a new iPhone, or is it just continue to pay $32 per month?

  Visit their Web sites. All the details are there for you to browse and decide what suits you best. Only you can decide.

• New window creates a gap between the Favorites (top) and tabs (bottom)

  19/12/14 bug Firefox began to occur:

  • When having only 1 window open and opening tabs behaves normally.
  • However, when you open a new window of the space between the bookmarks (top) and tabs (bottom) spans all windows. Its boring.

  So far only challenge is to just close and open 1 single window, or to use the module 'Classic theme restaurateur' and switch the tabs position from the bottom to the top, but all new windows will open the gap again.

  Image below.

  Unfortunately, none of these options works, so far, use 'CTR' and turn the legs up (default) allows the opening of new windows without gaps.
  Seems to be some sort of bug recently showing on CTR.

  You will need to find a way to contact the developer to let them know.

  EDIT: It seems to be resolved, seems a new version was released and the problem disappeared. Thank you very much for the help.

• Dropbox for bookmarks or downloads of the navigation bar adds space between the navigation bar and bar bookmarks.

  When I press the button edit bookmark or download the toolbar for navigation that a line of space appears between the navigation bar and the bookmarks toolbar. This problem is corrected when I start Firefox in safe mode, but not when I boot normally and disable all addons. Please tell us how to solve this problem. Reseting Firefox and install all add ons still causes too many problems, so I hope to be able to solve this problem without reset.

  [url =http://postimg.org/image/uwr2x6x21/] [img] http://S28.postimg.org/uwr2x6x21/space.jpg line / URL

  You can also try to delete the file localstore.rdf (resets the toolbar configuration) in the case of its corrupt.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Hello world

  just bought a new macbook pro 2015 and I can't transfer file via airdrop between the macbook pro and my iphone 6.

  Can someone please help me solve this problem?

  Thank you

  < re-titled by host >

  First check the steps to run the drop:

  Use AirDrop to send the contents of your Mac - Apple Support

  There are some work around to try airdrop work:

  1. Turn off Bluetooth on your Mac.
  2. Delete /Library/Preferences/com.apple.Bluetooth.plist
  3. Re-turn on Bluetooth

  You can find more info here:

  Transfer and AirDrop does not work in El Capitan

  If you do not see all of your device, it means that you are affected by the same problem, I have known, since the upgrade to OS X the air drop of Captain does not work.