TCP data labview n/b and c ++

Similar Questions

• TCP between Labview 6.1 and 8.5

  Computer 1 running Labview 6.1 and needs pass 'flattened chain' cluster of data, using the TCP ports, 2 computer which is be running Labview 8.5.

  On the computer 2 can unflatten 6.1 data cluster provided in his counterpart 8.5 cluster?

  Also, in inversion, 1 computer would be able to unflatten 8.5 cluster data transmitted to his counterpart of 6.1 cluster?

  You shouldn't have any problems spending flattened between versions of LabVIEW.  I don't know why Mark think it's suspicious; Flatten to string explicitly provides options for compatibility (see Help) dating back to 4 LabVIEW.

• TCP data flow is interrupted by recording data (text entry)

  Hello, I am currently working on a senior design project where my team is currently developing a control system for a small wind turbine. We are adding sensors and wireless systems to the turbine. The sensor data will be collected and sent over a TCP connection. The Labview will serve as the listener and display the values on the web.

  I have problems with the registration however data.

  I would like for where you put in the time, you the datalogger to be active, then press a button and the data logger records the incoming values on the TCP connection and create a CSV text file.

  Whenever the loop of data logging is running, stops the flow of data from the sensor so all my recorded values are the same for the duration.

  Any input would be appreciated.

  Thank you!

  
  

• LabView 8.5 and 2010 on the same computer running XP?

  Is it possible to install two version 8.5 and 2010 on the XP machine? And then work on some projects in Labview 8.5 and on other projects in Labview 2010 without a conflict?

  What about device drivers? What version of DAQ driver will work in both versions of Labview?

  Thanks a lot for any insite.

  Rita

  Always install older versions first. Some SDK don't play well with several versions of LabVIEW. With regard to the acquisition of data: http://digital.ni.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298

• What is the best way and to share data between a server and a Client app?

  Hello

  I'm trying to communicate a Client-Server application.

  In fact, I already have a simple data transfer via TCP/IP. However, I don't know yet, if TCP/IP is the best (and by that I mean, better, faster, safer, etc.)

  How to do.

  What are the cons and Pros between TCP/IP, STM and shared Variable?

  Do you recommend another type of communication in addition to these 3?

  Thank you

  Matt.

  In my view, that a general question cannot have a response says.

  Then, there is no way 'the best' for sharing data between a client and a server app.

  I like to use TCP/IP, but sometimes (when data loss is not critical) I use UPD (quick and dirty).

  I generally avoid shared variables, especially on embedded devices.

  Some other times I have I like to Exchange data in a database...

  A few other times I Exchange data using file...

  Marco

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• The application of health on my new 6s shows "no data" power, active energy and stand hours of rest.

  Health app shows "no data" power, active energy and stand hours of rest

  Hello, Mjalderman.

  Thank you for visiting the communities of Apple support.

  I understand that some application of health data is not followed.  Looks like you don't have a device such as an Apple Watch or similar tracker connected to your iPhone 6s.  You would need a type of source or fitness tracker to collect these data before it would show in these categories.

  Collect health and fitness

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch

  I have included a few options of our Apple store to give you an idea of what is needed to keep these categories.  You are not limited to these options.

  Fitness Tracker

  See you soon

• LabVIEW Analysis multicore and empty matrices in applications Applications Toolkit

  As well as several other toolkits, "in 2015 the analysis multi-core and Sparse Matrix Toolkit moved to the LabVIEW tools network."

  In previous versions of MASM tool, a runtime engine was necessary to the execution of applications applications used the Toolbox. With the move to network tools it seems not be any support for applications applications.  Builds work very well, but can not run on systems that do not have a LabVIEW development environment and the Toolkit of MASM installed.

  Everyone has tried to build a LabVIEW application in 2015 using analysis of Sparse Matrix Toolkit and LabVIEW Multicore?

  I contacted my local support staff and applied for online support, but until now I'm stuck on the first level of the AE group, and I really need to talk to a developer of the tool of MASM. Is there a developer reading this forum tool? Could someone at OR who reads this please pass it on to a suitable developer?

  Thank you!

  Matt

  Matt,

  We have published the installer of the MASMT runtime on the next page of the LVTN

  http://www.NI.com/gate/GB/GB_EVALTLKTLVMULTICORE/us

  You can click on "Download of FTP" on the section 'Download NOR LabVIEW Multicore analysis and Sparse Matrix Toolkit Run-Time Engine' to get the Runtime setup. We will know if you encounter any problems. Thank you!

• the TCP data

  I am putting together a VI to read data TCP with a 12 byte TCP wrap (the first 12 bytes of each TCP data packet), but I have problems when there is no TCP data.

  

  Is it possible to determine if there are TCP data for a specific device (IP address) before I try to read the

  TCP is used for each TCP packet envelope?

  Thank you

  0x20 is 0d 32 - that is the number of bytes in your package. If you type run your string of length 1 byte for a U8, you should get the size of the packets.

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• Is it possible to find in which case is run in LabVIEW VI programmatically and display it...

  Is it possible to find in which case is run in LabVIEW VI programmatically and display it...

  I have published earlier the plugin Quick Drop here - https://decibel.ni.com/content/docs/DOC-38903#comment-36562 there is more information on how install or use it.