TCP IP not enough memory

Similar Questions

• Not enough memory to complete this operation.

  I had a glance through the assignments to the title of this topic and no solution to the error that I am experiencing.

  My LabVIEW application runs on a windows 7 PC and receives messages from an application running on tha RT PC LabVIEW TCP/IP.  These messages from 4 k to 7 k bytes in length and reception are queued in the comms TCP/IP thread and removed and converted to the appropriate data type for display on the front panel in another thread (design of producer/consumer).

  After running for between 1 and 24 hours, one or more "not enough memory to complete this operation.' dialog boxes are displayed.  This interrupts the execution of the application, but these closing dialog boxes allows the application to continue running.  What I find strange is that if there is not enough available memory how is possible for the application to continue running. Windows resource monitor display shows that there is always some 1.1 GB available.  Also, what is strange is that there no noticeable change in memory is committed to my application.  I expect that if I had a memory leak which committed memory would slowly creep upward. If I need extra RAM in this PC or adding RAM will increase just enough time between errors?

  My system specs are as follows:

  Dell Optiplex XE Intel Core 2 Duo CPU 3 GHz / 2 GB RAM running Windows 7 Professional 32-bit

  LabVIEW 2010 SP1

  Any help would be appreciated.

  Kind regards

  Rob

  Dear Rob,

  Same problem, I was faced with one of my applications.

  Give some delay in your writing RT TCP loop. RAM is fine no problem with your RAM. If you connect to your data file, you found after some time, you get some unwanted characters on the TCP/IP Protocol these unwanted characters increase your data to read size. So to avoid this gives some delay in your cRIO TCP send loop.

• I can't open attachments generated in Excel or Word. Get an error there is not enough memory or disk space.

  MIcrosoft Excel cannot open or save documents more because there is not enough memory or disk space.
  To make more memory available, close workbooks or programs you no longer need.
  To free disk space, delete files that you no longer have need of the disc you save to.

  I have 4.75 TB of disk space available. I tried to close open programs and I can't always open attachments.

  I did a search on google and found some info that seems to suggest that it is a question of MS Excel /Word.
  Read the info on this link:

  • http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-Excel/Microsoft-Excel-cannot-open-or-save-any-more/961a153e-6c68-4b22-b896-94601a28d7e2?auth=1

  Two comments Anula D'Souza and Gus cops offer different solutions, so try both.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• not enough memory to download email, have removed many of the emails, emptied the trash, sent files help!

  It keeps giving me the message that it can not download my emails because there is not enough memory. I deleted more except the ones I really want to keep. I deleted trash, sent, what we can do. Except keep towards the top with download them every day. I use my Ipad for most. Or how can I get them to download on their own. I go to 'new' and scroll down to my email address to get new emails.

  I do not know how to compact files

  So I hope you read the article I linked to.

• I just noticed that at the bottom of the content library, it no longer displays "new playlist" that does not mean that I did not enough memory?

  When the new playlist is more to show what this means that there not enough memory left.  My hp desktop computer said I have only 931 GB left.

  The new playlist option is always available under the file menu or by using the CTRL + N keyboard shortcut do not know why the button was taken away in the last update of iTunes.

  

  You can also click anywhere on the bar of the left hand under your existing reading list if there is space, and you will see the option for the new playlist.

  I hope this helps

• Not enough memory

  I installed Skype, talked with people normally, but now I can't. I had to move my mouse around the Skype to make it visible and when I clicked on it somewhere that the error would pop up - 'not enough memory is available to process this command. " I hope you guys could help me

  You won't have much fun with the latest versions of Skype on your computer Windows XP obsolete, especially with only 502 MB RAM installed. The problem is with the graphic resources of handling.

  You can try to disable the display of animated emoticons.

  Open tools-> Options-> appearance IM. Uncheck the option: "show animated emoticons.

  If that still does not help, then uninstall the currently installed version of Skype and install the old version 7.5:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-7-6-crashes-on-startup/m-p/4031560#M35324...

• Tecra M9: not enough memory to run

  Hello

  I have a problem with an application that freezes with messagebox not "enough memory for the operation".
  I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.

  I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
  I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.

  Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?

  Thank you in advance

  Hello

  > Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  Hmmm, check if you can run Notepad with another RAM module removed.
  I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.

• Not enough memory to perform the operation

  Hello

  I tried to run the code below, but still I get the error "not enough memory to perform."

  I don't know why is so? Its simple operation that I am doing...

  Thank you very much...

  This is what you need:

  

  Note that may throw you / add 'steps' caused by the type of double cast in full.

  Another note: in light of your departure and the timeout value and the Delta_f, you will get 10495 steps. This seems quite high. For?

  Norbert

• Not enough memory is available to complete this operation

  Hi I have a problem with reading the data of Access database. If I want to analyze a product these datas on 6 months, for example, I got the message error "not enough memory is available to complete this operation"

  The line of code that makes this error is

  "aValues = RecordSet.GetRows (-1, 0, aColumnNames).

  I have 1 GB of RAM on my PC but I also tried on PC with 2 GB of RAM it does not help.

  Is this a problem with the Microsoft MDAC? I work with Win XP SP3 and MDAC 2.81 SP1.

  I have no idea more wa could be the reason...

  Someone has an idea or the same problem?

  Best regards

  Hi Suttema,

  I would like to try a request for Recordset buffered, instead of asking all records at once.  See if this example helps.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Can not open opening Adobe Photo DeLuxe 4.0 said not enough memory RAM

  Original title: opening Adobe Photo DeLuxe 4.0

  Does not open, says not enough memory RAM. I have 6 GB of RAM!

  Hello

  ·        What operating system is installed on your computer?

  ·        You did changes to the computer before the show?

  ·        What is the full error message that you receive?

  Try it out below mentioned suggestions and check if this may help:

  Method 1: Change the memory allocation for PhotoDeluxe Business Edition:

  a. start PhotoDeluxe Business Edition.

  b. Choose file > Preferences > discs to work.

  (c) in the use of physical memory section, change the used by PhotoDeluxe set to 75%, and then click

  d. OK.

  e. restart PhotoDeluxe Business Edition.

  Method 2: Rebuild and resize the Windows swap file:

  a. close all applications.

  b. right-click on my computer and choose Properties from the context menu.

  c. click on the performance tab, and then click virtual memory.

  d. Select the option 'Let Me specify my own virtual memory settings'.

  e. set the Minimum and Maximum virtual memory to a value equal to twice the amount of

  your computer's installed RAM, but it is not greater than 64 MB. For example, if you have 16 MB of RAM, the value

  the Minimum values and Maximum to 32 MB. If you have 48 MB of RAM, set the Minimum and

  A maximum of 64 MB. (Do not include any RAM for a RAM, such as Connectix RAM expansion utility

  Doubler).

  f. click OK, then click Yes in the dialog box confirm virtual memory settings.

  g. click close in the System Properties dialog box.

  h. click Yes in the dialog to change system settings to restart the computer.

  Contact the Adobe Photo Deluxe forum to get help.

  http://forums.Adobe.com/thread/360663

• EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  , can not send email - message says may be installed incorrectly and

  EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number

  ox80070002.   What to do

  See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com

  Steve

• try to install KB942288, get - message "not enough memory is available to process this command."

  KB942288 installation, get message "not enough memory is available to process this command."

  What storage speak?

  See...

  Windows Vista Help: Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

  Then...

  Open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  Vista Service Pack 1 (SP1) or SP2 installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP logon message... system couldn't open session... not enough memory is available to process this command.

  Windows XP has just received the last update.  If a user is logged on cannot pass between users because when do you a pop up and States opening message... "" the system could not log due to the following error: not enough memory is available to process this command "."

  -Have concerts and gigs of free hard disk space
  -Currently 2 GB RAM
  -He just started this
  -The system does not allow more than 1 user at a time to log in now
  -If you try to connect more than 1 user, it displays the error message and cannot connect again, even not the original user, you must restart the system.

  So what's happening?  Is it a mind foopah the latest patch XP?  Why can't connect more than 1 user on?  I used to be able to connect the whole family and switch between users!

  Remove your antivirus (Norton, Bitdefender 2010, etc.) and try to connect again.  It should work.  Then download Microsoft Security essential Microsoft and you shoul be ok.

  Vitin

• sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

  I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

  Hi superconfused123,

  This problem occurs because of a design limitation in the tape recorder.

  You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.