TCP/IP server

Similar Questions

• LabWindows tcp client server generic

  I did a program fom the customer sample in the example TCP file. Now, I want this program to communicate to a generic server that does not have labwindows running on it. Is this possible with only a few minor changes or do I need to start from scratch with a different sampling program?

  This is certainly not the case: I managed to connect a PLC siemens-like through the ConnectToTCPServer without major problems.

  Do you get errors when trying to connect or command is simply delay? If so, if you increase the time-out period you are able to connect?

• LabView to access the TCP/IP ESP8266 Server

  Hello world!

  I am an artificial intelligence system and must be monitorated on Wifi. I use a 12 ESP8266 to create a TCP/IP server. To test the server, I send data to port 80 and view by google chrome, the string is displayed correctly. The problem appears when I try to required data via TCP/IP client in LabView. I have tried a large number of ports with the same thing: held ESP account activity lights when LabView is trying to start a comunication and when timeout occurred. I'm a beast on communication networks, and for this reason, I'll have a lot of trouble in communication. Someone has an idea how to solve this problem? Thank you.

  I discovered the problem. When you configure ESP8266 to act as a server, it accepts only HTTP request, so a TCP/IP connection will get nothing. You need the GET HTTP range block, so that you can communicate ESP with LabView.

• use of the server for executable files VI

  Hi all

  I tried to find a good explanation and example usage of VIserver to launch executables on client PC (XP) via a LAN to a PC (Win7) process controller. Basically, what I found for the controller is specified in this code snippet:

  

  The following was placed in the .ini file of the target at the time of construction to allow VIserver using an executable file (?):

  Server.TCP.Enabled = True
  Server.TCP.Access = "' + * '"
  Server.TCP.port = 3364
  Server.TCP.ACL = "290000000A000000010000001D00000003000000010000002A10000000030000000000010000000000"
  Server.VI.Access =""
  server.vi.callsEnabled = True
  server.vi.propertiesEnabled = True

  If a reference to an instance of application LV is open on the computer command on a specified port, and then a VI reference target

  for the .vi file (another instance?) opens on the same target for manipulation of knot VI. So what was lost for me is the executable

  I am trying to run the file. May not be wired to the terminal way to "ref Open VI". This implementation requires the .exe version and the version of VI

  I am trying to run the code? I launched with success of executable files over a LAN using plink with a script file. Problem is that I can't find a way

  get the target executables once loaded. There is most likely a C solution for this (I'll take it if anyone knows!), but since has VIserver of tools

  to control the execution, I would use it. Also, I want to understand the version of VI of the programme and the .exe in this case (s) link

  Version. Any help would be greatly appreciated.

  lb

  Ben OK,

  Your messages made me a technique to load with distance and running an exe file, built in LV8.5:

  1. to load: the controller emits a "tasklist" command to a target. The objective produces an output file of tasklist which is read by the controller. If it concludes that the target is already loaded, the controller will execute it with an invoke command node 'run a VI '.

  2. If the target is not loaded, then a script file is executed on the target via plink of the controller. This command will also start running.

  3. all the subVIs must reside on the target, as you said, even if (as in my case), the target has no LV Developer Suite installed. I placed Traoré versions of files and folders to exe in the same folder.

  4. the .ini file in the compilation has changed as shown in the first post of this thread. No special settings were used in the compilation.

  This probably isn't the exact technique you had in mind, but it doesn't seem to work... Thanks again for your help.

  lb

• SPA112 & SIP122 - bytes of garbage sent using the SIP over TCP

  Because the port UDP 5060 is blocked in my case, the SIP over TCP is a good solution for me.

  But when I put SPA112 to use SIP over TCP, the server record is still broken.

  (I used the version of the firmware is latest: 1.3.3 but older versions has the same behavior.)

  After capturing packets, a problem is found:

  Each time before SPA112 has sent a message to register, there were 9 frames of data sent before him.

  Each frame has 20 bytes, and the content is the same.

  The 20 bytes has a motive: the first 4 bytes is always 00 01 00 00.

  So come with 4 * 4 bytes, for example, d8 22 6 b 17 d8 d8 d8 22 6 b 17 22 6 b 17 b 22 6, 17

  So, in the stream TCP, the register message is like:

  ....."k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. » k.. » k......"k.." k.. "" k... "k.NOTIFY sip:sip.callwithus.com:5060 SIP/2.0

  Via:...

  The server responded immediately "SIP/2.0 484 address incomplete."

  Then send SPA112 record message again, this time it succeeded and the server response "SIP/2.0 401 Unauthorized '.

  Seems good.

  Subsequently, SPA112 has sent a new message digest information register but the bytes of garbage appeared again.

  Is there any configuration on this bytes of garbage?

  It seems that you hit the Nice firmware bug. I can tell you what I see in captured TCP stream.

  Your client is connected to the SIP server, but it is not start sending SIP messages - it STUN via the stream instead. You caught "STUN Binding request" nine times before the first SIP package. And an another STUN is tried before the second REGISTER.

  This is a bug with doubt - STUN have nothing to do in the stream TCP SIP. As the switch waits for the SIP packets, it is confused by byte STUN causing packets SIP to be misunderstood and rejected.

  Unfortunately, I have no idea how to report a bug in firmware to Cisco, unless you are willing to pay for it.

  On the other side, it would be that hard to solve the problem. Just disable the STUN.

  Thread mark as answered if it solves your problem, it will help others to find solutions.

• ORA-12545 error when the connection to the remote server

  Hello

  Env: Oracle 11 2 Client (11.2.0.1) on Oracle Linux 5.8 GR 64 bit

  DB server: Oracle 11 g 2 (11.2.0.3.6) on Oracle Linux 6.2 64bits

  I have installed Oracle 11 GR 2 client on a server and created the tnsnames.ora with required entry.

  When I try to connect to the databases on the server of remote database using the suite in two ways, one of them give me error "ORA-12545". Do not know why.

  [oracle@server ~] $ sqlplus scott/tiger@proddb01

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:24:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@server ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:25:04 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name: scott

  Enter the password:

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  Enter the user name:

  Here's my env:

  [oracle@server ~] $ echo $ORACLE_SID

  PRODRD01

  [oracle@server ~] $ echo $ORACLE_HOME

  /opt/Oracle/app/product/11.2.0/Client_1

  [oracle@server ~] $

  Input TNS is:

  PRODRD01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = server.whatever.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = PRODRD01)

  )

  )

  I tried to replace the host name and IP address, I still got the same error. The host name of the server database and IP entry does not exist in the file "/ etc/hosts. Could this be the cause? I can't edit the file "/ etc/hosts" and I couldn't convince the sys-admin to add the hostname of Server DB and IP entry to this file.

  Clues please?

  Best regards

  user130038 wrote:

  Hello

  Env: Oracle 11 2 Client (11.2.0.1) on Oracle Linux 5.8 GR 64 bit

  DB server: Oracle 11 g 2 (11.2.0.3.6) on Oracle Linux 6.2 64bits

  I have installed Oracle 11 GR 2 client on a server and created the tnsnames.ora with required entry.

  When I try to connect to the databases on the server of remote database using the suite in two ways, one of them give me error "ORA-12545". Do not know why.

  [oracle@server ~] $ sqlplus scott/tiger@proddb01

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:24:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@server ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:25:04 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name: scott

  Enter the password:

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  Enter the user name:

  Here's my env:

  [oracle@server ~] $ echo $ORACLE_SID

  PRODRD01

  [oracle@server ~] $ echo $ORACLE_HOME

  /opt/Oracle/app/product/11.2.0/Client_1

  [oracle@server ~] $

  Input TNS is:

  PRODRD01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = server.whatever.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = PRODRD01)

  )

  )

  I tried to replace the host name and IP address, I still got the same error. The host name of the server database and IP entry does not exist in the file "/ etc/hosts. Could this be the cause? I can't edit the file "/ etc/hosts" and I couldn't convince the sys-admin to add the hostname of Server DB and IP entry to this file.

  Clues please?

  Best regards

  When '@proddb01' is not used, then sqlplus can only connect to a local database, & there is no local database on the client system

• Strange behavior of GUI

  Hi all

  I'm a software developer in a neurosurgical research, and we are looking in a good software package to perform analyses on our biomedical data (16 channels of continuous data for 14 days at 200 Hz)... (btw: Labview is the way forward?)

  Therefore, I try to evaluate the latest version of Labview 2012 64-bit, but I'm having a strange problem. After a few seconds to play with the GUI (adding items to the VI,) or just resizing of windows, he answers correctly. It does not show the menus more (they appear for a fraction of a second, then disappear). I have to close the graphical user interface in the Task Manager... It also occurs in the window Gettings started...
  I installed the latest patch of f3, but it solves nothing.

  Here are my details:

  LabVIEW 2012 (allocated memory: 57629K, TCP idle server, Version 12.0f3 (64 bit))

  Windows 7 Pro SP1 64 bit

  CPU: Intel Core i7-3630QM

  RAM: 20 GB

  GPU: NVIDIA Quadro K1000M 4 GB with latest drivers NVIDIA

  I'm only using LV on a fairly normal installation of windows 7. Reboot does not change, nor a restore/update of GPU drivers doesn't change anything...

  In the meantime, I could save a simple vi, with only a few items and I open it as well, but I can't work with it for more than a minute...

  UPDATE: everything by typing this message, I tried to disable certain things, and at the moment, it seems to be resolved by disabling NVIDIA nView Desktop Manager (v 136.53), which I use for my setup dual monitor... I'll keep you updated if this really solves the problem...

  RESOLVED: I now use LV over 20 minutes with no problems... now I'll see if it can meet my needs...

• Data transfer Ethernet fails on deployed Application RT

  I wrote a TCP/IP client that interacts with a TCP/IP server on a LAN (cable). I've developed this during a few months on LabVIEW 2014 (no SP1) targeting a cRIO9068 chassis.

  Development went very well, never had any problem Ethernet flaky with LabVIEW. Once I got all the balls I have deployed and went out of the factory.

  Ethernet connects at the factory, but no data is transferred. Puzzled, I reconnected my LabVIEW Development for the chassis machine, opened the project from which the application has been deployed and ran from the project. This works. I see this behavior on the original chassis also, so I have two chassis, which work with the development environment but do not work when it is deployed.

  What's up with that? All ideas appreciated, I can't on this topic in these forums or a general search on Google.

  Thank you

  Bill

  The problem was caused by the execution of the first level VI is the reentrant value framework. I put it to not reentrant.

  With the help of the key has been

  netstat - a

  I saw that demand had several ESTABLISHED connections where alone should be possible.

  Along the way I cleaned up my code a little, but the root cause was multiple instances of the application currently running on the cRIO. If the boot vi is reentrant and then you get an instance when the material starts or restarts, then you get another instance when you launch the front panel on the web. Instead of the Panel connection to the program running, another one is started.

  During the execution of the development environment, that this does not happen. The development environment requires a single run on the top-level vi.

  A shout-out to the people of software OR: a small warning: 'several instances of the program can execute because the first level VI is reentrant' to the start of construction, and add something Panel documentation as "Connect a remote panel based on the web in a VI environment level a second copy of the top-level VI will call" would have saved me a day...

  See you soon,.

  Bill

• Lookout Modbus Ethernet driver for-More PLC?

  I see that automationdirect is now out with a CPU of PLC of more that uses material from DirectLogic 205. Their documentation indicates that the new CPU Ethernet port communicates with the protocols that include:

  Modbus/TCP Client (master) and

  Modbus/TCP (slave) Server

  This will be contacted by the Modbus Ethernet Lookout driver?

  Yes, Modbus driver support ethernet

  We we the ECOM-100 "and" bridge MB

• Open a command of the vi of high level for an executable

  Hello everyone

  I was wondering how you would open a command remotely for the first level vi in an executable?

  I created a LabVIEW application and tested opening remote control when it is running as a result of labview full development - it all works very well. I'll just exploit > connect to remote control and enter the address of the server, the port (8000) and the name of vi in the format of ' My Project.lvproh/My Computer/main.vi ' path.

  However, if I can build this application into an executable file that I don't seem to be able to open a remote panel - it may be that I'm just in the name of VI incorrectly.

  with VI or VI = "main.vi" name name = "C:\builds\main.exe\main.vi" and the exe file. running, I get the error:

  Connection to the server remote panel...
  Asked that VI is not loaded in memory on the server computer

  But I don't know how I would be.

  The main.ini has the following configuration:

  server.app.propertiesEnabled = True
  Server.OLE.Enabled = True
  Server.TCP.ACL = "0800000008000000"
  Server.TCP.Enabled = True
  Server.TCP.Paranoid = true
  Server.TCP.port = 6363
  server.tcp.serviceName =""
  Server.VI.Access =""
  server.vi.callsEnabled = True
  server.vi.propertiesEnabled = True
  WebServer.Enabled = True
  WebServer.TcpAccess = "" + c * ' "
  WebServer.ViAccess = "' + * '"
  DebugServerEnabled = True
  DebugServerWaitOnLaunch = False

  Both machines have LabVIEW 2011 Profesional Development System SP1 so I don't think it's a matter of limited remote access license.

  Any suggestions as to where I'm wrong would be very appreciated.

  See you soon

  John

  It seems that you can actually use remote panels within an executable file.

  The problem I had was that I had left the port of the web server for the panels of distance to the LabVIEW development environment. Which means that the main LabVIEW web server was in the path of the web server that was associated with my built application.

  With web application server on a different port and the VI in memory (and the file in a directory/external library to the exe if this is not the top level VI), you just need to specify the name of VI such as main.vi.

  Solved!

• SelectThreadIdealProcessor

  I use the LW/CVI FDS 7.0.  I have a programme of work to acquire data at the same time a data acquisition card and two serial devices. I now need to add another sensor that acts as a TCP/IP server.  I have worked successfully with the new sensor that communicates via TCP/IP using a test program. In my data acquisition program, I will acquire new data the main thread sensor because it is intensive reminder for TCP/IP communications and use a second thread for the existing DAQ card and two serial ports.  If the program is unable to obtain the data fast enough, I want to assign the second thread for the second processor on the computer. The white paper NOR 'Multithreading in LabWindows/CVI' says setting the preferred processor for a thread using the 'SetThreadIdealProcesssor' Win32 API function LW/CVI will automatically search the SDK Windows/for unresolved references after searching for the libraries of LW. When I try to compile the exe, I get an error in 'Unresolved Reference' linker for the function "SetThreadIdealProcesssor".  By examining the NEITHER provided the files 'sdkfuncs.txt' and 'sdkfuncs_base.txt', no reference to the "SetThreadIdealProcesssor" is located. I found the function prototype in the file "winbase.h. I was unable to find "SetThreadIdealProcesssor" in any file where LW/CVI is installed with the exception of a .pdf on multithreading file and the file "winbase.h.

  Is or is not the "SetThreadIdealProcesssor" included with LW/CVI FDS 7.0?  If Yes, where and how I reference to bind.  I have add "windows.h" and "winbase.h" as include files to try to resolve the problem without success.

  I saw a forum a few years ago, but there was no resolution.

  Are you sure that it is a mistake to link that you see and not a compilation error? The problem I see is that the function in winbase.h prototype has a guard preprocessor around it (probably because that feature was added only in Windows 2000). These guardians of preprocessor to protect against using the use inadvertently a function does not much sense, since what matters is the version of the operating system when you run your program, not the version with which you compile.

  In all cases, you should be able to work around this problem by adding the following to the top of your source code (before include windows.h):

  #define _WIN32_WINNT 0 x 0500

  After that, you should get is no longer a link error. Let me know if this isn't the case.

  Moreover, the implementatin function is in C:\Program NIUninstaller Instruments\CVI70\sdk\lib\msvc\kernel32.lib. You don't have to add this library to the project.

  Luis

• global functional

  Hi all.

  Having the application main and 4 under apps.  Each of the 4 under apps functional a global (or motor action) in which he writes and reads a cluster of app-specific data.

  The idea is that using a functional overall for each application data could be transmitted between all and APP of the hand.

  For example, I want to be able to drop the sub-app1 FG on the BD for sub-app2 and read all the data.  At the same time sub-app1 would update its FG on his own comics.

  This doesn't seem to work.  For example the FG1 is updated by sub-app1, BUT the instance of FG1 on the BD for sub-app2 is empty.

  None of the fivet is reentrant; That of why there is never a single instance of each FG, correct?  There is only one (1) instance of each FG on the disk.  Each sub - app and FG are located in a separate LV project.

  Confused.

  Battler.

  MarcoMauri wrote:

  I could be wrong, but because the FG is running various projects, that is to say different application instances, it can be used to Exchange data.

  In all cases are another way to make, for example DataSocket...

  Marco

  I think you're right.

  While the two screws are running the two project go to hiarchy screen and press 'ctrl-a' to show all.

  You will see that the two FG are running is unique contexts. So, this is the fate of an app to talk to another application on the same computer or on PC, so Datasockets, TCP/IP, server of VI...

  Ben

• SANHQ and Assist Support

  Hello guys - our SANHQ is behind the firewall and no access to the internet. Newspapers of the looks are not getting downloaded to dell. Can we use proxy in SANHQ to allow the logs must be downloaded or what is the name of the server SupportAssist and the port it uses to get out do us NAT?

  Group activity Type Description length payload ID timestamp server status
  06/03/2015 15:01:10 data Diag - on demand - download waiting for retry data collection could not be uploaded to the SupportAssist server, connection failed. The data collected retrying the upload at 06/03/2015-18:00.    41 s.        Default server

  Hi Ad,

  This info is in the SANHQ Administrator's guide.  Table 2

  I stuck here, but it is not copy and paste.

  Solution

  Table 2: Protocol and Port information for a feature Standard SAN HQ

  Protocol (Port) ¹

  Description

  TCP/IP (8000)

  Communication client-SAN HQ TCP/IP server. You can change this number and host name/IP address of the port on the SAN page seat Service Con - figuration (for more information, see Configuration settings Server seat of SAN on page 67).

  HTTP (80)

  Communication Client HQ SAN on the Web to retrieve the latest updates of information (psonlinehelp.equallogic.com). For more information, see get Notifications of updated SAN Headquarters on page 22.

  UDP (514)

  As an option. Communication Server HQ SAN in the picture of the PS Series, to view syslog entries in the Panel events and Audits.

  SNMP/UDP (161)

  Communication between the HQ SAN server and the table for the series PS stand-ard of data collection.

  SSH (22)

  Secure Socket Shell communications between the HQ of SAN server and

  PS Series and for the initial setup of SupportAssist Bay.

  TCP/IP (2606)

  SupportAssist data collection port to connect with the PS Series table.

  HTTPS (443)

  Communication of SAN HQ server on the server of Dell's Support for downloading data Sup-portAssist and weekly updates of local repository (including the material and newly-sup-port disks).

  ¹For SAN HQ servers that use a proxy, the ports must be opened for all features. Enable an exception to allow https://apwebservice.dell.com to the secure web server of SupportAssist.

  Kind regards

• Cannot access remote network by VPN Site to Site ASA

  Hello everyone

  First of all I must say that I have configured the VPN site-to site a million times before.  Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks

  ASA local:
  hostname gyd - asa
  domain bct.az
  activate the encrypted password of XeY1QWHKPK75Y48j
  XeY1QWHKPK75Y48j encrypted passwd
  names of
  DNS-guard
  !
  interface GigabitEthernet0/0
  Shutdown
  nameif vpnswc
  security-level 0
  IP 10.254.17.41 255.255.255.248
  !
  interface GigabitEthernet0/1
  Vpn-turan-Baku description
  nameif outside Baku
  security-level 0
  IP 10.254.17.9 255.255.255.248
  !
  interface GigabitEthernet0/2
  Vpn-ganja description
  nameif outside-Ganja
  security-level 0
  IP 10.254.17.17 255.255.255.248
  !
  interface GigabitEthernet0/2.30
  Description remote access
  VLAN 30
  nameif remote access
  security-level 0
  IP 85.*. *. * 255.255.255.0
  !
  interface GigabitEthernet0/3
  Description BCT_Inside
  nameif inside-Bct
  security-level 100
  IP 10.40.50.65 255.255.255.252
  !
  interface Management0/0
  nameif management
  security-level 100
  IP 192.168.251.1 255.255.255.0
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  DNS server-group DefaultDNS
  name-server 192.168.1.3
  domain bct.az
  permit same-security-traffic intra-interface
  object-group network obj - 192.168.121.0
  object-group network obj - 10.40.60.0
  object-group network obj - 10.40.50.0
  object-group network obj - 192.168.0.0
  object-group network obj - 172.26.0.0
  object-group network obj - 10.254.17.0
  object-group network obj - 192.168.122.0
  object-group service obj-tcp-eq-22
  object-group network obj - 10.254.17.18
  object-group network obj - 10.254.17.10
  object-group network obj - 10.254.17.26
  access-list 110 scope ip allow a whole
  NAT list extended access permit tcp any host 10.254.17.10 eq ssh
  NAT list extended access permit tcp any host 10.254.17.26 eq ssh
  access-list extended ip allowed any one sheep
  icmp_inside list extended access permit icmp any one
  icmp_inside of access allowed any ip an extended list
  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
  RDP list extended access permit tcp any host 192.168.45.3 eq 3389
  rdp extended permitted any one ip access list
  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
  NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
  NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
  access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
  GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
  Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
  azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
  permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
  pager lines 24
  Enable logging
  emblem of logging
  recording of debug console
  recording of debug trap
  asdm of logging of information
  Interior-Bct 192.168.1.27 host connection
  flow-export destination inside-Bct 192.168.1.27 9996
  vpnswc MTU 1500
  outside Baku MTU 1500
  outside-Ganja MTU 1500
  MTU 1500 remote access
  Interior-Bct MTU 1500
  management of MTU 1500
  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
  IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any outside Baku
  ICMP allow access remotely
  ICMP allow any interior-Bct
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  global (outside-Baku) 1 interface
  global (outside-Ganja) interface 2
  3 overall (RAS) interface
  azans access-list NAT 3 (outside-Ganja)
  NAT (remote access) 0 access-list sheep-vpn-city
  NAT 3 list nat-vpn-internet access (remote access)
  NAT (inside-Bct) 0-list of access inside_nat0_outbound
  NAT (inside-Bct) 2-nat-ganja access list
  NAT (inside-Bct) 1 access list nat
  Access-group rdp on interface outside-Ganja
  !
  Router eigrp 2008
  No Auto-resume
  neighbor 10.254.17.10 interface outside Baku
  neighbor 10.40.50.66 Interior-Bct interface
  Network 10.40.50.64 255.255.255.252
  Network 10.250.25.0 255.255.255.0
  Network 10.254.17.8 255.255.255.248
  Network 10.254.17.16 255.255.255.248
  redistribute static
  !
  Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
  Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
  Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
  Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
  Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
  Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server protocol Ganymede GANYMEDE +.
  AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
  key *.
  AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
  key *.
  RADIUS protocol AAA-server TACACS1
  AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
  key *.
  AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
  key *.
  authentication AAA ssh console LOCAL GANYMEDE
  Console to enable AAA authentication RADIUS LOCAL
  Console Telnet AAA authentication RADIUS LOCAL
  AAA accounting ssh console GANYMEDE
  Console Telnet accounting AAA GANYMEDE
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 Interior-Bct
  http 192.168.139.0 255.255.255.0 Interior-Bct
  http 192.168.0.0 255.255.255.0 Interior-Bct
  Survey community SNMP-server host inside-Bct 192.168.1.27
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
  Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
  Crypto ipsec transform-set vpnclienttrans transport mode
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.10
  card crypto mymap 10 transform-set RIGHT
  correspondence address card crypto mymap 20 110
  card crypto mymap 20 peers set 10.254.17.11
  mymap 20 transform-set myset2 crypto card
  card crypto mymap interface outside Baku
  correspondence address card crypto ganja 10 110
  10 ganja crypto map peer set 10.254.17.18
  card crypto ganja 10 transform-set RIGHT
  card crypto interface outside-Ganja ganja
  correspondence address card crypto vpntest 20 110
  peer set card crypto vpntest 20 10.250.25.1
  newset vpntest 20 transform-set card crypto
  card crypto vpntest interface vpnswc
  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
  card crypto interface for remote access vpnclientmap
  Crypto ca trustpoint ASDM_TrustPoint0
  registration auto
  name of the object CN = gyd - asa .az .bct
  sslvpnkeypair key pair
  Configure CRL
  map of crypto DefaultCertificateMap 10 ca certificate

  crypto isakmp identity address
  ISAKMP crypto enable vpnswc
  ISAKMP crypto enable outside-Baku
  ISAKMP crypto enable outside-Ganja
  crypto ISAKMP enable remote access
  ISAKMP crypto enable Interior-Bct
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  No vpn-addr-assign aaa
  Telnet timeout 5
  SSH 192.168.0.0 255.255.255.0 Interior-Bct
  SSH timeout 35
  Console timeout 0
  priority queue outside Baku
  queue-limit 2046
  TX-ring-limit 254
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Server NTP 192.168.1.3
  SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
  SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
  SSL-trust ASDM_TrustPoint0 remote access point
  WebVPN
  turn on remote access
  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
  enable SVC
  tunnel-group-list activate
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  internal group ssl policy
  attributes of group ssl policy
  banner welcome to SW value
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  group-lock value SSL
  WebVPN
  value of the SPS URL-list
  internal vpn group policy
  attributes of vpn group policy
  value of DNS-server 192.168.1.3
  Protocol-tunnel-VPN IPSec l2tp ipsec
  disable the PFS
  BCT.AZ value by default-field
  ssl VPN-group-strategy
  WebVPN
  value of the SPS URL-list
  IPSec-attributes tunnel-group DefaultL2LGroup
  ISAKMP retry threshold 20 keepalive 5
  attributes global-tunnel-group DefaultRAGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  IPSec-attributes tunnel-group DefaultWEBVPNGroup
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.10 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.10
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type SSL tunnel-group remote access
  attributes global-group-tunnel SSL
  ssl address pool
  Authentication (remote access) LOCAL servers group
  Group Policy - by default-ssl
  certificate-use-set-name username
  Group-tunnel SSL webvpn-attributes
  enable SSL group-alias
  Group-url https://85. *. *. * / activate
  tunnel-group 10.254.17.18 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.18
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  tunnel-group 10.254.17.11 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.11
  pre-shared key *.
  ISAKMP retry threshold 20 keepalive 5
  type tunnel-group DefaultSWITGroup remote access
  attributes global-tunnel-group DefaultSWITGroup
  raccess address pool
  Group-RADIUS authentication server
  Group Policy - by default-vpn
  IPSec-attributes tunnel-group DefaultSWITGroup
  pre-shared key *.
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the rsh
  inspect the rtsp
  inspect sqlnet
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  Review the ip options
  class flow_export_cl
  flow-export-type of event all the destination 192.168.1.27
  class class by default
  flow-export-type of event all the destination 192.168.1.27
  Policy-map Voicepolicy
  class voice
  priority
  The class data
  police release 80000000
  !
  global service-policy global_policy
  service-policy interface outside Baku Voicepolicy
  context of prompt hostname

  Cryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
  : end
  GYD - asa #.

  ASA remote:
  ASA Version 8.2 (3)
  !
  ciscoasa hostname
  activate the encrypted password of XeY1QWHKPK75Y48j
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif inside
  security-level 100
  IP 192.168.80.14 255.255.255.0
  !
  interface Ethernet0/1
  nameif outside
  security-level 0
  IP 10.254.17.11 255.255.255.248
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  nameif management
  security-level 100
  no ip address
  management only
  !
  boot system Disk0: / asa823 - k8.bin
  passive FTP mode
  access-list 110 scope ip allow a whole
  192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  management of MTU 1500
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow all outside
  ICMP allow any inside
  ASDM image disk0: / asdm - 621.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside) 0 access-list sheep
  Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.80.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Crypto ipsec transform-set newset aes - esp esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
  life crypto ipsec security association seconds 2147483646
  Crypto ipsec kilobytes of life security-association 2147483646
  correspondence address card crypto mymap 10 110
  card crypto mymap 10 peers set 10.254.17.9
  mymap 10 transform-set myset2 crypto card
  mymap outside crypto map interface
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 20
  preshared authentication
  aes encryption
  md5 hash
  Group 2
  life 86400
  crypto ISAKMP policy 30
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 40
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN

  tunnel-group 10.254.17.9 type ipsec-l2l
  IPSec-attributes tunnel-group 10.254.17.9
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname

  Cryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
  : end
  ciscoasa # $

  Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas

  Would appreciate any help. Thank you in advance...

  If the tunnel is up (phase 1), but no traffic passing the best test is the following:

  Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.

  inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside

  The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).

  Test on both directions.

  Please post the results.

  Federico.

• ORA-12154 for sqlplus username/password@TNS but tns ping works and sqlplus username@TNS works.

  Hello-

  I am facing the following question when I try to connect by using the command prompt sqlplus for Oracle 11.2.0.3 DB installed and running on HP - UX.

  The password is not all special characters & I also tried with the double quotes which did not work.

  Following want to work with username/password@TNSNAME because I'm trying to get my application to connect to the database, the schema mentioned because it uses the jdbc connection with the connection as (username/password@TNS:1521) string.

  C:\Users>sqlplus username/Pa55w0rd@DBNAME;
  
  
  SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 10 07:21:43 2016
  
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  ERROR:
  ORA-12154: TNS:could not resolve the connect identifier specified
  
  
  
  
  Enter user-name:
  C:\Users>tnsping DBNAME
  
  
  TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 10-FEB-2
  016 07:21:57
  
  
  Copyright (c) 1997, 2010, Oracle.  All rights reserved.
  
  
  Used parameter files:
  C:\app\product\11.2.0\client_2\network\admin\sqlnet.ora
  
  
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = server.domain) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = DBNAME)))
  OK (50 msec)
  
  
  C:\Users>sqlplus username@DBNAME
  
  
  SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 10 07:22:05 2016
  
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  
  Enter password:
  
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  With the Partitioning, Automatic Storage Management, OLAP, Data Mining
  and Real Application Testing options
  
  
  SQL> show user
  USER is "username"
  SQL> exit
  Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64
  bit Production
  With the Partitioning, Automatic Storage Management, OLAP, Data Mining
  and Real Application Testing options
  
  
  C:\Users>
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  content content of tnsnames.ora & sqlnet.ora:

  DBNAME =
  (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP) (HOST = server.domain)  (PORT = 1521))
      (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = DBNAME)
      )
  )
  

  # sqlnet.ora Network Configuration File: C:\app\product\11.2.0\client_2\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  
  #SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  
  
  
  
  
  
  

  Thanks in advance

  Hello

  sqlplus username/Pa55w0rd@DBNAME;

  Try it without the semicolon;

  sqlplus username/Pa55w0rd@DBNAME

  Regards Thomas