Teachers Pension extraction process - extract results table
Hi gurus,Please help us to find the table of results retrieved for the process to extract teachers pension for the legislation of the United Kingdom.
Thank you
Rambaud
Not sure about the table names, but you can see how it is set up on the screen of the extract system and mark it
Clive
Tags: Oracle Applications
Similar Questions
-
Refresh the result table or rerun the query
I have a requirement, simple but stuck somewhere.
Jdev 11.1.1.17 Expert level: Mid-Senior
I have a form of application and the associated result table. It works great and no problems.
My requirement is that I have a commandlink on one of the column. Clicking on that will open a popup with an editable filed. OK will commit and Cancel will close the pop-up window.
After that the popup is dismissed with partial trigger, my table refreshes but data is identical to the front. But if I click the Find (Search) button on the query, it shows the data with the results updated which are changed in the pop-up window above.
How do I update table which re - runs the query and then refreshes the table after the popup is dismissed, or when the user clicks the OK button in the pop-up window.
Get on the viewObject of this table and call the executeQuery method that
Write this method in the method AMImpl and then call it in bean managed using the OperationBinding at the click on the Ok button of the dialog box
ViewObject vo = this.getViewObjectName ();
vo.executeQuery ();
Ashish
-
Cannot sort the results table using datetime attribute
I use short 3.1. My result table disappears when I try to sort by using a date/time attribute. I also saw him sometimes throw me an error: in ORDER BY clause: ORDER BY clauses may refer only to the attributes set in the same statement. I don't have any problem sorting the same point of view on a list of result of the datetime attribute. What could be wrong?
I installed the provided patch support of oracle and it works. My studio version was 3.1.14220. After connection, the version is 3.1.18915.
-
JDeveloper 12.1.2
I have two display criteria, VC1 and VC2 are based both on the same VO. For example, let's say that I have used VO
SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID
Employees;
Let this be VC1:
SELECT * from (SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID
EMPLOYEES employees ) QRSLT WHERE 1 = 2
Used for af:query
So let's say I have VC2 with bind variable
SELECT * from (SELECT Employees.EMPLOYEE, Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.DEPARTMENT_ID
EMPLOYEES employees ) QRSLT WHERE 1 = 2 AND ((UPPER (QRSLT. Department_id) = UPPER(:DeptIdBind))) )
The user runs the af:query research and resulting table lists some employees. The last value of the column in the table of results, I did as links:
< af:column headerText = 'Department' id = "c1" width = "140" >
< af:link shortDesc = "#{bindings.myVO.hints.DepartmentId.tooltip}" id = "ot4" text = ' #{row. "" DepartmentId}'
action = "#{backingBeanScope.MyBean.byDept}" partialTriggers =": t1" / >
< / af:column >
If the user now clicks on the link, I would expect the following:
1. the values entered in the af: query to stay
2. the table refreshes since the underlying VC2 is defined and executed VO. Here is the code VOImpl and backingbean
The bean of support code
public String byDept() {}
Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("EmployeesIterator");
Line r = dcItteratorBindings.getCurrentRow ();
Object keyvar = r.getAttribute ("DepartmentId");
OperationBinding searchExp = ADFUtils.findOperation ("searchByDept");
searchExp.getParamsMap () .put ("deptId", keyvar);
searchExp.execute ();
Returns a null value.
}
Impl VO
{} public void searchByDepartment (String deptId)
setDeptIdBind (deptId);
executeQuery();
}
Problem:
Query (VC2) runs but table does not reflect that. That is to say I don't see the list of employees of the selected Department
Any idea?
RPP = partial page request
PPR refresh a component jsf
AdfFacesContext.getCurrentInstance () .addPartialTarget (UIComponent);
Where component is the component that you want to refresh.
Have you checked that the query executed vc ID?
Timo
-
The column headers on the centering results table
I have a search page, which the result table has many columns. I would like to center text in the header of each column. Please notify.Please define table Alingment Coulmn * iconButtonFormat *.
Kind regards
Vivek
-
Hey all,.
I am relatively new to the use of LabView and can not find a way to achieve this.
I have 2 tables, guard A and table B. I have want to search specific of table B values by analyzing the table first and noting what places, index, they are.
Array a I am able to locate locations, but it is in the form of a table 1 d of double. Now that I know the index of places of interest, how can I extract the data from table B?
When I try to use Index Array LabView gives the following error, "source is table 1 d and sink is long. Any help would be appreciated on how I can extract the points of data in table B by the presence of an array of indexes of interest of greately.
Example of what I'm trying to do
Entry:
Places / clues: 1 3 4
Table of waveform: 0 2 4 6 8 10
Output:
0 4 6
Thank you for your time
The tables are indexed locations 1,3, & 4 should be 0, 2 & 3 If you want as the output values of 0. Is attached a photo of the code to do this. Do not forget to disbale for indexing on all data and allow indexing on table ' location/clues. "
-
Application of feedback and a question about extraction of table
Hello all, thanks in advance for anyone could give me any suggestions.
I enclose a code that I have written, the code is a project to control an instrument.
For simplicity I've substituted the signal with the random number generator.
I would be interested to receive general feedback by people more expert than me on writing code.
Then a question.
The code generates a table of 10 items for each value of what I called 'Applied value' in the code.
I'd be interested extract the last value in the array for each applied value.
Thus, for example, if I set Start = 0, = 0.1 step and stop = 1. The size of the array will be 100, values
I am interested to have only 10 to put in another table.
I hope this might be clear enough...
Thank you for your patience.
Giuseppe.
Hey GiuseppeTx,
See if that's what you're going to. I have attached my edited code.
I just added a case structure inside your loop that should do what you want. I take the picture and the length of the array and each time the while loop is about to start (i.e. the terminal Stop is set to True), I conveyed the last value in the table in an array of construction and to a new table. I also have a conditional Terminal configuration where it will transmit only data through if the case structure series 'true' State, ensuring that no data is transmitted if the case if set to false.
I hope this helps you!
-
XMLType.extract: result of split
Hello
I use this function of the soap_api.sql for web services.
The problem is that it returns a large number of values, and they are all concatenated to the return value. Is there a way to divide all values with a separator or something?FUNCTION get_return_value(p_response IN OUT NOCOPY t_response, p_name IN VARCHAR2, p_namespace IN VARCHAR2) RETURN VARCHAR2 AS -- --------------------------------------------------------------------- BEGIN RETURN p_response.doc.extract('//'||p_name||'/child::text()',p_namespace).getstringval(); END;
For example. It returns "TexasLos AngelesChicagoPhoenix" and I would like something like "Texas; Los Angeles; Chicago; Phoenix»
I am using Oracle 11g
Thank youHello
You can use the XMLQuery function and string-join (XPath 2.0).
For example:
SQL> DECLARE 2 3 xmldoc xmltype := xmltype( 4 '
5 ' 10 ); 11 12 p_name VARCHAR2(30) := 'city'; 13 p_namespace VARCHAR2(100) := 'test'; 14 15 v_result VARCHAR2(100); 16 17 BEGIN 18 19 select xmlcast( 20 xmlquery( 21 ( 'declare default element namespace "'||p_namespace||'"; (::) 22 string-join(//'||p_name||'/child::text(),";")' ) 23 passing xmldoc 24 returning content 25 ) 26 as varchar2(100) 27 ) into v_result 28 from dual; 29 30 dbms_output.put_line(v_result); 31 32 END; 33 / Texas;Los Angeles;Chicago;Phoenix PL/SQL procedure successfully completedTexas 6Los Angeles 7Chicago 8Phoenix 9It works well on 11.2, not sure about 11.1.
Another way, by blocking the part extracted outside XQuery.
Perhaps it fits better into your actual design:SQL> DECLARE 2 3 xmldoc xmltype := xmltype( 4 '
5 ' 10 ); 11 12 p_name VARCHAR2(30) := 'city'; 13 p_namespace VARCHAR2(100) := 'xmlns="test"'; 14 15 v_result VARCHAR2(100); 16 17 BEGIN 18 19 select xmlcast( 20 xmlquery( 21 'string-join(//text(),";")' 22 passing extract(xmldoc, '//'||p_name, p_namespace) 23 returning content 24 ) 25 as varchar2(100) 26 ) into v_result 27 from dual; 28 29 dbms_output.put_line(v_result); 30 31 END; 32 / Texas;Los Angeles;Chicago;Phoenix PL/SQL procedure successfully completedTexas 6Los Angeles 7Chicago 8Phoenix 9 -
Extract a table under a table 2D
I've beaten my head against the wall on this issue for a while now and ran out of ideas so I ask for help somehow.
What I want is pretty simple:
A way to take a picture 2D with the time and temperature (the temperature is a thermocouple so there is a small amount of noise) and to know when the table first crosses a certain point and start collecting data. After that, I would like to stop the collection of data in this way with a cut-off point. The thing is, is that I like to keep the values of all the data in this table under intact and to match the time with temperature data identical to the original 2D table.
All the methods I've tried to delete data points so that they do not align with the original. I tried to use the trigger Signal Express VI and gives me what I need, but the problem is that I have problems this signal triggered a 2D with time of temp table. Also, I must say that these data are getting sent to a xls. file via ActiveX, that AFAIK only accepts the table format.
My last test, I think that the closest, I'm going to get what I want, so I have the gasket in the hope that it helps me to help you, but its totally wrong if my pride to deform and to propose another approach.
Any help would be great,
Neill
OK, I understand what you mean now. Your "inconclusive" should read actually "not decreasing."
What you probably need is reduce to zero the data for the threshold and to nullify and Exchange limits. Now, it seems to work perfectly.
-
Absent extraction of Table columns
Hello
I use Oracle 10 g R2 on Win XP.
I have a requirement in which I need to create a .csv file that store the data retrieved from a table. The table structure is as follows: -.
Name of the table - currency
Columns - Curr_A, Curr_B, Smallest_Curr_A, Largest_Curr_B
Now, the CSV output file should show all the data in the table columns are displayed above with 2 other columns "Curr_C and Curr_D", which should see the Virgin. Now these 2 additional columns are not present in the table structure, however, we have an obligation to name a file to CSV showing 6 columns in the header (4 columns table + extra 2 columns with null value). The additional columns would fill it manually later.
I use the Sub anonymous block to produce a file in .csv format.
How can I accommodate the extra 2 columns in the query SELECT above?DECLARE -- cursor to read the rejected_rows table CURSOR c1_event_data IS select Curr_A CurrA, Curr_B CurrB, Smallest_Curr_A SmallestCurrA, Largest_Curr_B LargestCurrB from Currency; lvch_report_file_name varchar2(70); lvch_report_file_dir varchar2(40) := 'Direc1'; lvch_output_line varchar2(2000); lvch_file_error varchar2(64) := NULL; lfil_file_handle UTL_FILE.FILE_TYPE; lvch_loc VARCHAR2(100); BEGIN --execute immediate 'alter session set optimizer_index_cost_adj=1'; -- Create output file name lvch_report_file_name := 'Test.csv'; -- Open output file lfil_file_handle := UTL_FILE.FOPEN(lvch_report_file_dir,lvch_report_file_name,'W'); --set header record lvch_output_line := 'CurrA,CurrB,SmallestCurrA,LargestCurrB'; UTL_FILE.PUT_LINE(lfil_file_handle,lvch_output_line); for in_loop in c1_event_data loop lvch_output_line := in_loop.CurrA || ',' || in_loop.CurrB || ',' || in_loop.SmallestCurrA || ',' || in_loop.LargestCurrB; UTL_FILE.PUT_LINE(lfil_file_handle,lvch_output_line); END LOOP; -- Close output file UTL_FILE.FCLOSE(lfil_file_handle); --execute immediate 'alter session set optimizer_index_cost_adj=100'; EXCEPTION WHEN OTHERS THEN DBMS_OUTPUT.PUT_LINE('Error occcured in code'); DBMS_OUTPUT.PUT_LINE('SQLCODE: '||SQLCODE); DBMS_OUTPUT.PUT_LINE('ERROR Message: '||SUBSTR(SQLERRM,1,1000)); END; /
Thanks a lot for the help.Hello
I would just like to add two extra commas at the end of each row of data.
In other words, where you say now:... lvch_output_line := in_loop.CurrA || ',' || in_loop.CurrB || ',' || in_loop.SmallestCurrA || ',' || in_loop.LargestCurrB;
change to:
... lvch_output_line := in_loop.CurrA || ',' || in_loop.CurrB || ',' || in_loop.SmallestCurrA || ',' || in_loop.LargestCurrB || ',,';
Published by: Frank Kulash, November 16, 2010 11:28
And, of course, change the header line to:
lvch_output_line := 'CurrA,CurrB,SmallestCurrA,LargestCurrB,Curr_C,Curr_D';
-
UK Public sector: Teachers Pension Patch and functional facility
Hello
I have a question about installing functional meanings. (I'm assuming that / awaits the response of those who have made this setup already and they know / gone thorugh the Readme for the patch)
I try to use the code provided in the patch Readme to findout good level for the pension contributions... To do this, I need the annual salary FTES within the fast formula.
The patch readme says:
Once the formula has recovered the contribution rates for retirement, it must be
applied to the real wage in the period.
l_tps_emp_contr_sal = FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD
However, I'm getting zero value for FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD.
that is, zero l_tps_emp_contr_sal that is passed to
l_EE_Contribution_Percent = to_number (GET_TABLE_VALUE
("PQP_TPA_PENSIONABLE_PAY_RANGE",
"Employee contribution rate."
TO_CHAR (l_tps_emp_contr_sal)))
and nothing is coming...
How can I get the correct value of FULL_TIME_ANNUAL_SALARY_TPS_ASG_TRANSFER_PTD?
The readme says next
-----------------------------------------------------------------------------
FTE/salary amount
-----------------------------------------------------------------------------
The annual salary is the equivalent gross salary full time based on which the
band must be decided. There may be several items by assignment that
could be populating this value and each item can have different
configurations, for example:
a. element can have an annual value where a period is calculated
b. period amount to pay
The above, it can still rank based on
a. use of the model of work or hours of work
b. full-time salary
c. part-time salary.
a. a payment of time which annualization cannot be applied, but should FTES
be applied.
(b) a payment of time on which annualization may be applied but FTE must
applies do not.
c. annual value to which FTES should be applied.
d. annual value on which ETP should not apply
There are many more variations in the scenarios described above.
To perform the calculation of the annual salary gross full-time equivalents
for all possible scenarios, the seeded element FTES annualized pay must be
used by the client.
So that the Pension contribution rate to be determined, the annual FTES
effective treatment for the period in question, must be available.
It is assumed that the value of the FTES will be available for current items
that the client uses to pay teachers because it would be necessary to determine
the value of the actual payment for the period.
This value will be fed to the stocked item (annualized compensation of FTES) by the
formula for the individual item.
------------------------------------------------------------------------------
Changes proposed for the determination of the annual value full time:
------------------------------------------------------------------------------
Suggested changes to the formula of elements to determine the annual value full time:
The following instructions must be added to the existing compensation element
formula. Here are the changes suggested to existing formulas to derive the
Annual salary of FTE.
Case 1: If the form element has access to the annual value of FTES.
return_Annual_inf = ANNUAL_VALUE
/ * Assign the annual value of FTES for this element to the return_Annual_inf variable * /.
Case 2: If the form element has access to only to the period of value and
Annual value of FTE is not stored anywhere.
return_Annual_inf = (PERIOD_VALUE * PAY_STATUTORY_ANNUAL_PERIODS)
/ * Assign the full period time value for this element multiplied by the standard
DBI for the annual periods to local variable return_Annual_inf * /.
Case 3: If the form element has access to only time partial annual value
and annual FTE value is not stored anywhere.
return_Annual_inf = ANNUAL_VALUE / ASG_FTE_VALUE
/ * Assign the full period time value for this element multiplied by the standard
DBI for the annual periods to local variable return_Annual_inf * /.
Box 4: If the form element has access to only part of the period time value
and annual FTE value is not stored anywhere.
return_Annual_inf =(PERIOD_VALUE*PAY_STATUTORY_ANNUAL_PERIODS)/ASG_FTE_VALUE
/ * Assign the full period time value for this element multiplied by the standard
DBI for the annual periods then divided by DBI standard for TVE at the local level
return_Annual_inf variable * /.
Note:
The new local variable return_annual_inf must be returned to formula for
the new piece of planted information FTES annualized pay.You mean, where is the formula results screen? It is to:
Total compensation--> basic--> formula results
Enter the name of the element "Annual salary" or be it in the area of the element, and then choose the search"" button.
You should see the formula (probably with a 'Standard' rule against him) and the existing rules of the result of the formula in the lower window.
You must create a new rule in this bottom window - what was called the new return form variable, should be selected in the drop-down list. Then choose "Indirect result", then choose the item 'FTES annualized compensation' as the target element, with the entry name 'Value to pay', and then 'save '. You should be off and running then.
Hope that helps
Clive
-
Calculation of the costs of process execution results
I am trying to view my costing process using view > payroll result process
= Monthly salary payroll
Action type = cost
and I click on find I can see the date of costing in March 31, 2010. I then click on the process button and then I click on the employee that I want to display the details of costs and I click on the button of the costs
Need me a screen where I enter the encrypted carry information IE should I select a date in the lov and then I click the detail section under the name of the item that I can display the employee details for each element and entry of debit and credit for each of the elements.
Can someone tell me the name of the table to this form that I want to display using the select sql command.
Appreciate all your help!Try this query...
Select pet.element_name ' Element', 'Value' pc.costed_value, pc.debit_or_credit ' "debit / Credit", pc.balance_or_cost «Scale / Cost", ppa1.date_earned, paa1.assignment_id»»»
from pay_costs
pay_cost_allocation_keyflex pcak,
pay_input_values_f piv,
animal pay_element_types_f,
pay_assignment_actions AAP,
pay_payroll_actions App,
Pai pay_action_interlocks,
pay_assignment_actions paa1,
pay_payroll_actions ppa1
where pc.cost_allocation_keyflex_id = pcak.cost_allocation_keyflex_id
and pc.assignment_action_id = paa.assignment_action_id
and paa.payroll_action_id = ppa.payroll_action_id
and pc.input_value_id = piv.input_value_id
and piv. ELEMENT_TYPE_ID = pet.element_type_id
and ppa.action_type = 'C '.
and paa.assignment_action_id = pai.locking_action_id
and pai.locked_action_id = paa1.assignment_action_id
and paa1.payroll_action_id = ppa1.payroll_action_id
and ppa1.action_type IN ('R', 'Q')
and paa1.source_action_id IS NULL
and paa1.assignment_id =: pAssignmentId
and ppa1.date_earned =: update
order by 1 -
Reformat the result Table data
I have data collected from octave analysis that appears in an array of result before being sent to excel for more calculations and reports. With the help of the GetOctaveInfo.vi, I find myself with a large amount of data I don't need. Ideally, all I want is the frequency (Hz) in one column and the decibel (dB) read in the next. I have attached photos of the table of results and how it is formatted in excel. Is there a way to remove the extra data? Note that the size of the table of results can change.
Thank you.
Youn can use the attached .vi (LV 8.5) to remove the additional data
/ Sture
-
Help Removeing all the commas of the results table.
Good afternoon al,.
I'm pretty new on Oracle SQL developer and need a little help to find the best way to replace all commas in a table of results with ' > '.
I run a select statement:
SELECT
WHERECLAUSEVALUE
Of
FDM_SAB. TDATAMAP
ORDER BY WHERECLAUSEVALUE ASC
To produce a very simple table with 1 column. (see bleow):
*
*
*
*
00000,50000
00000,50000
00000,50000
00000,50000
00000,50000
00000,50000
As you can see some of the results contains a comma then a space, I'm looking to replace the "," (comma and space) with ' > ' (greater-than sign in). I guess this is done at a point with the function replace but have had no luck so far.
Any help would be greatly appreciated. Thank you very much
CharlieP.S. I'm new to this forum and this is my first post here; I apologize if my question is not clear or I don't give enough information.
Replace (columnname, ',' > ')
Should work for you.
If this isn't the case, please post what you've tried and show the results you get.
-
The search criteria and the result is displayed in the table in a group header. I want to get the value of the selected row and analyze the value of Vo in the next page for a variable binding. So I need to manage the value biniding to the bean tbal, but there is no option to bind the table to a bean. So, how can I get the selected value.
Kind regards
K M Krishna.
First tell us your version of jdev, please.
to get to the selected line you need not to link the table to a managed bean. You can for example drag the necessary attributes of the VO on the page and drop them as components of a inputText. the framework then generated the attribute bindings and sets the values of the current row for them. As you do not really need the inputText elements switch to source view (! it is essential!), then remove them. This will eliminate the Visual component, but attribute bindings are stored.
Know you can access the values through their EL or as you get the value of an attribute via it's mandatory.
Timo
Maybe you are looking for
-
dial of the watch is damaged; best way to replace it?
Hello I damaged my dial and need to replace. What is the best way to get it replaced?
-
HP 7 plus 1302: Tablet HP 7 more 1302 - upgrade using KitKat.
Hello - I read somewhere in some forums that a KitKat update has been released for the Tablet: HP 7 more 1302. I downloaded the files, but I'm stumped as to how to start the update. I try refreshing the update by going to: settings - about and then r
-
Satellite A660 - 11 M - Possible to get more small/more lightweight charger?
Very satisfied with my new A660 - 11 M, but find the charger (V85) to be almost too big/heavy to be portable. Its a minus 3 times the size of my old notebook charger (which admittedly gave only half of the current). The A660 relatively short battery
-
Search for Safari crashes on all devices
I have a question very bizzare. I am unable to use Safari with success on my iPad, iPhone and the iMac. They all run the latest versions of El Capitan & iOS respectively. On the iMac - safari takes over, but the search bar does not work - no search i
-
How to create a USB key with HUU for UCS
Hello I have 4 UCS C220M3 requiring updates and I downloaded HUU2.0.3d - 1 for that in the ISO file I really want to use a USB key to start the UCS of the box before I shipthem - so there is no network can - just out of the box, boot on USB via F6 an