Calculation of the costs of process execution results

Similar Questions

• Calculation of the costs of the project will allow GST inventory for purchase order

  I have a module for the calculation of project costs and a project is created

  I can add the cost of the inventory to the project?

  Yes you can create movements of stock as long as your tasks are charged.

  FYI, you can start using project - EBS (MOSC) that is the community of MOS and have more users so give you faster responses and more general public.

  Thank you

  Gene

• Calculation of the cost of a product in stores using OPA

  Hello
  
  I worked on POC which must come back together to store names and lower cost for the list of products available in different stores. I m the following challenges in development.
  
  1. How do I return the names of several stores in OPA since an attribute retains a unique value.
  2. calculation of lower cost according to the availability in shops. How do this declaratively?
  3. how to design the entity model in the OPA.
  
  An example of the problem, it's an order for products A, B and C with each unit 1,2,2 quantities. Suppose P, Q, R, S and T of stores that offer products A, B and C. Each Bank maintains its own inventory/stock of each product. The challenge is to meet the demands of order according to the offered less cost as per a store with units available in the inventory of the product.
  
  It would be very useful if no response is validated from the beginning.

  If you try to send several stores, you will need to deduce a strictly ordered list (i.e. a single store is preferred, each subsequent store is the "next most favorite", etc.). A sorted list strictly require something unique to use as a "switch" when two or more stores have the same price. In general, an ID or other unique attribute is used.

  Directly to answer your question choose a store... the simplest approach is to make something similar given that policies and rules are supposed to be deterministic, selection "randomly" from a store would prove to be problematic in the long term (e.g. predictable test cases, etc.)

  Instead of using InstanceValueIf to identify the price the less expensive, use InstanceMinimum to get the lowest price, regardless of the number of stores have this award. To identify a single store, decide what attribute will be used as a switch (e.g. a digital ID attribute on the entity price would work in your case). You can then use conditions that are used to identify the price to use as one that has the minimum ID among those whose minimum price.

• Calculation of the costs rail tab disabled

  Hello
  
  The cost tab is disabled when you set payment methods in oracle payroll. Is there any installation failed.
  
  Kind regards

  Yes. You just do it once.

• disable the button during process execution

  Greetings!  I have a situation where I have to click a button 'Submit' on a page and does not allow the user to click the button again while the process of the page runs.  How can I DΘsactiver the button after it is pushed and not activate the button until the page is complete?  There must be a way to do it with a dynamic action, but I did not understand a way of doing.

  Thanks in advance!
  John

  Hello

  How can I DΘsactiver the button after it is pushed and not activate the button until the page is complete?  There must be a way to do it with a dynamic action, but I did not understand a way of doing.

  It would be pointless to let the user to wait until process finish so the user can continue to interact with the system. If it is a long process so I suggest that you use the process in the APEX of long-term management

  on the other

  Simply create DA who fires on the event "before submitting the Page" and in Action, choose section "Run JavaScript Code". The code you need to add is:

  apex.widget.waitPopup();
  

  Thank you

  Benjamin.

• Standard reports - calculation of the costs of the project and project billing

  Someone at - it a document that they can share that lists the standard flow into establishing project costs and project billing, as well as descrptions.
  
  Thank you!

  Hello

  See project Fundamandals User Guide Page 459: http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121pjfug.pdf

  Thank you
  Govind

• Stock Items on the work of the costing of the project

  Hello

  When my company uses project manufacturing with EAM.  When they build capital assets, they enter Oracle EAM and create work orders.  On work, without share capital or the description of the basic elements are entered.   On the PO, they have a destination type of the "workshop".    When received, there will be no any transaction mtl_material_transactions and if I understand correctly, they will not be collected cost and therefore do not appear in the calculation of the costs of the project.

  It is a problem that we need these fees to be transferred to the calculation of the cost of the project so that they can be assigned to an asset in the establishment costs of the project and eventually transferred to assets of the Oracle.

  Anyone has any suggestions on how to manage this?

  Thank you

  Scott

  I solved this problem and project costs will BE received interface PO in which distribution IN. had a destination type of the factory.

• Credit entry missing in the calculation of rail costs

  Dear all,
  
  To fully fill the customer's requirement, we have created an element at the end of the cost information, but when I run the Costing it provides only the debit entries
  
  Credit entry is missing!
  
  Steps below put fallow
  
  (1) creates an element with the primary Classification as Information
  
  Link 2) to payroll, costs and balancing also details
  
  (3) execution of the request for costs
  
  In the debit entry only results found
  
  Please help me in this issue
  
  
  
  concerning
  JAI
  
  Published by: 912775 on December 27, 2012 12:15 AM

  Sorry mate... I do not have you?
  You already have the element of information of value to pay?
  Make sure that the name of the input value of money as a unit of MEASURE and the exact species value pay

• Automatic calculation of the budgetary cost

  Hello
  
  In projects approved oracle budget cost can take hours and hourly resources the calculation of rates based on the employee's employment to manipulate himself to prepare the budget?
  
  Is it possible to Oracle project? If so, can any 1 help me on the process?
  
  Thanks in advance much n...

  Hello

  You may want to consider Project Management User Guide, there is a chapter on the budgeting and forecasting.
  This text says:
  You can set budgets and forecasts of projects Oracle to calculate the gross cost, ployez under the burden of costs and revenues for each line in your budget or forecast. Projects Oracle calculates the amounts based on the quantities and amounts that you enter and from the fee that you specify for the costs and income in your budget or the planned rate to plan the scheduling options...
  .
  Note the extended functionality described here is relevant if you enable financial plans and use HTML pages.
  If you use the budgeting forms you will enter the quantity, but need Extension customer Budget to calculate the cost of crude and loaded automatically. You need to develop for these calculations in the extension code.

  Dina

• When the sequence of process template client file is loaded for execution?

  As part of a custom process template I've created, I would like to make a few changes in the sequence of the client before file called by the process template. These changes will be then be restored after the loop finishes USE (I'm changing the sequential model).

  Another thread, I discovered that TestStand sequences cannot be edited structurally once they have been loaded for execution. My question is: what is client sequence template process ' for execution "?

  After some research, I discovered that the sequence of the client file is not locked to prevent changes to the sequence editor until the "Reminder of the main sequence" sequence step call runs in the model process entry point. At this stage, the sequence of the client file is loaded dynamically as the module at this stage.

  However, before this point, there are two places that the file of the client's sequence is used, and I want to assure you that they don't 'load the customer file for execution.  The Runstate.ProcessModelClient property is a reference to the object the client file SequenceFile and exist as soon as the entry point is called. In addition, the engine must know about the sequence of the client file to correctly call reminders of process model. Do any of these things make the movie of 'responsible for performance customer file?

  It boils down to this: can I do safely from the structural changes to my file of sequence of the client during the ProcessSetup and ProcessCleanup?

  According to the information I found in another post (see the comments of Eric_Crank on page 2), it is allowed. However, in this case customers were only make changes to the property Data of the RunState.ProcessModelClient. I want to assure you that I can use the TestStand API on the reference too.

  Also, just FYI, I got this works. I can add steps to the sequence MainSequence customer sequence file of the group stage of installation of the point of entry of the process model via the API TestStand. I ask here if make sure that it is a safe thing to do, and that there is nothing I plan not to.

  Thank you.

  Josh,

  If your sequence allows the option "optimize no concave calls this sequence", the first time the sequence run TestStand stores a copy of the execution of the sequence in a cache associated with running. As long as the sequence is in this cache you can not change, and TestStand considers that the sequence for 'run' file (see the SequenceFile.IsExecuting property). You cannot unload 'enforcement' sequence files (see SequenceFile.CanUnload). Sequences remain in the cache until it is closed. There is no way for you to remove the sequences of this cache, but you can prevent them to be added to the cache by turning off the option "optimize... ». Disabling this option should have no impact on the performance that you call the sequence only once.

  -Erik

• What is an indication (0x3) "last execution results" from the list of scheduled task?

  I get the 0 (x 3) in past execution results when the scheduled task runs at night, but the task sems don't work that the files are copied to the external drive?

  Hello

  1. what task is scheduled when you receive this error message?
   
  2. what kind of files were copied during the error 0 x 3?
  System error codes.
   
  http://msdn.Microsoft.com/en-us/library/ms681382.aspx
   
  Method 1
   
  Step 1
   
  Run a scan of system files Checker
   
  http://support.Microsoft.com/kb/929833
   
  Step 2
   
  I use a robocopy command, then try to re-register Robocopy.exe, you must:
  
  1) click Start
  
  (2) click on run
  
  (3) type regsvr32 Robocopy.exe
  
  (4) press on enter
  
  (5) restart your computer
   
  If you are still facing questions, please go to.
   
  Method 2
   
  Download copy tools Robo (original file intended to be produced server, but the files specified robocopy applies to Windows 7 included in the KIT)
   
  http://download.Microsoft.com/download/8/e/c/8ec3a7d8-05b4-440A-a71e-ca3ee25fe057/Rktools.exe
   
  Note: If a compatibility Manager appears, click on the program, the installation can be dormant however it is tested to be a successful installation of Windows 7.
   
  Please post the results of the resolution of the problems.
   
  Hope this helps

• change the result of the calculation to the negative

  I have a calculation script custom in an Acrobat form field:

  var myFormat = "mm/dd/yyyy".

  var startDt = this.getField("PolicyEffectiveDate").value
  var endDt = this.getField("ChngDate").value

  startDate = util.scand (myFormat, startDt) var;
  var endDate = util.scand (myFormat, endDt);

  xdays var = Math.round (Math.abs ((startDate.getTime () - endDate.getTime (()) / (86400000)))

  Event.Value = ((365-(xdays)) / 365) .toFixed (3) * (this.getField("AnnualPremium2").value)

  How would the total resulting calculation to the negative change?

  Thanks in advance for any help!

  I found a solution... I just multiplied the event.value by negative 1.

• Sequence structure flat inside the timed loop and execution order

  I have some problems trying to implement a flat sequence structure when you use a loop timed on a target of cRio VI

  I tried with or without the while loop around the structure of sequence flat, and I also tried to replace the 'Non-deterministic loop' with a timed loop

  The problem is that the program seems to run only once, then get stuck somewhere

  I am writing a program that performs the following operations as soon as possible:
  1. read the Pos_MC of entry on the FPGA
  2 send the value of Pos_MC to the VI target (on cRio CPU)
  3. calculate a value of output based on Pos_MC with a PID block ("exit PID')
  4. send 'PID output' to the FPGA
  5 write "PID output" analog output "MOOG".

  In addition, I want the program to return the measured value "Pos_MC" to a host VI for the recording of data

  So that the output of PID is calculated and sent to the FPGA as quickly as possible, I placed a flat sequence structure to ensure that it happens before you send the output to the nondeterministic loop for recording data

  Also, I want the digital input 'Stop' to be able to stop the loop deterministic (the timed loop)

  I read much more entries than that and the help of several PID and exit, but I rewrote the code for a single entry and exit to make it easier to illustrate

  Screenshot of the code is shown in 'target code.png' and 'fpga code.png.

  The VI themselves are attached in the next post (cannot attach files of more than 3)

  Question 1:
  Any advice on how to get this race? Thank you!

  Question 2:
  Is also my correct understanding in that, using this structure, each 0.9ms (fpga loop time) comes the following:
  1. the input ("Pos_MOOG") is read on the fpga
  2. the production of PID is calculated on the cRio with some delay to computation (for example 0.1ms)
  3. the output of PID is then written for analog output "MOOG" in all about 0, 1 - 0.2ms
  4. the FPGA program then waits until 0.9ms spent and repeat the process

  As opposed to the next pass whenever performing a loop is started on the FPGA:

  1. the FPGA reads the input and written on the output (the output of the execution of the previous loop PID)

  2. then the entry is sent the cRio, PID output is calculated and sent to the FPGA

  3. the new release of PID is maintained until the next time through the loop

  Thank you!

  PHG wrote:

  Thanks for the input guys, any advice as to how I could get the feature in scenario 1?

  I still say that the best route is just putting all the logic of the control in the FPGA.

  Other alternatives include 1) the use of DMA FIFO sedn data back or 2) use interruptions so that the FPGA code can not read the output level until the RT.

  DMA FIFOs are usually very limited, and I would not use them in this situation since I belive said it this code to do for the many outputs.

• Calculation of the cardinality.

  Hello

  Selectivity is the fraction of rows in the rowset that meets the requirement of predicate.
  It can be calculated as the inverse of the number of separate in the column lines, if the distinct values in the column are distributed evenly.
  If the distinct values in the column are not distributed evenly then optimizer search histogram for selectivity.

  
  Cardinality refers to the number of rows in the rowset.
  Can it be calculated as selectivity * num_rows in the table/column?

  
  In the Bitmap Index.
  We used to create indexes of bitmap on a column, whose cardinality is low.
  Here the cardinality can be calculated by:-num_distinct_rows/total_num_rows

  
  My question is, what is the difference between the cardinality of the optimizer and the cardinality based on which the Bitmap index is created?

  Thank you

  The total number of lines is not a parameter

  That's a setting BOTH the 'hand' two parameters to determine the selectivity and the determination of costs that will determine if an index can be used or not.

  1 - total number of lines to select

  2. total number of lines to select the

  Oracle decide NOT to use an index just because the result may contain 1 million rows. But if the table has only 1 million lines then it can get these lines by using a full table rather than an index scan.

  Or if the table contains rows 1 billion so the index will be suddenly much more attractive.

  As part of a 1 million line table the term 'little' may not apply if you're talking about 1 million rows. But 1 million lines is indeed "little" in the context of this 1 billion row table.

  That's why I said the word 'little' has little or no sense. There must be a meaningful 'context'

  And when the glossary speak of a threshold of 1% in the "degree of cardinality", in my humble OPINION both the term and the definition is wrong.

  Sure - this 1% threshold ' part is bad, but it is related to the bitmap index and has NOTHING to do with the definition of the degree of cardinality provided.

  Not to argue with the basic premise - just try to clarify things a little.

• Calculation of the date fields

  Hello

  I have three fields. 2 are formatted with the date field, and the third for the calculation of the difference between 2 date fields.

  For example, Field1 said August 2012, and field 2 said Sep 2012. Is it possible that I can do field 3 dipslay the 1 (month) response?

  Any help would be greatly appreciated.

  Thank you

  Yes, you use the date object JavaScript extract fields of the whole of the year and the month, create a common denominator for the month and year, and do the math.

  The event of calculation for the number of months:

  Delete the result value

  Event.Value = "";

  get field values

  var sStart = this.getField("Date1").value;

  Send var = this.getField("Date2").value;

  process if we have data

  If (sStart! = "" & send!) = "") {}

  convert date objects date strings

  var start = util.scand ("mmm yyyy", sStart);

  oEnd var = util.scand ("mmm yyyy", sending);

  get the full date and month year beginning

  var nStartFullYear = oStart.getFullYear ();

  var nStartMonth = oStart.getMonth ();

  convert data from start of month

  var nStartMonths = (nStartFullYear * 12) + nStartMonth;

  Get the complete year end date and month

  var nEndFullYear = oEnd.getFullYear ();

  var nEndMonth = oEnd.getMonth ();

  convert data from end of month

  var nEndMonths = (nEndFullYear * 12) + nEndMonth;

  do the math

  Event.Value = nEndMonths - nStartMonths;

  } / / end have given

  You will need to adjust the names for the start and end dates.