Tecra 8100: Docking Station: Notebook reset when you try to burn DVDs
System: Toshiba Tecra 8100 + Replicator port
PA3017E + Expansion Station PA3018E,
Samsung DVD Burner H552B (new firmware) built in (docking station).
Problem: If I try to burn a dvd/CD, the system performs a hard reset and is inexplicable.
What could be?
Hello Stefan
It's not easy to say why but maybe sometimes it s a burning question of the software?
Have you tried using different burning software?
I recommend to check if this problem occurs with different burning software.
Best regards
Tags: Toshiba
Similar Questions
-
ntdll.dll error message when you try to burn DVDs
Help please. I use Magix Movie Edit Pro 2014 and when you try to burn on a DVD I get the following error message:
I've uninstalled and reinstalled the software nothing is done and cannot figure out how to solve this problem. I use Windows 7.
Hello
You must contact the support for developers of this product.
Concerning
-
Blank DVDs does not get recognized when you try to burn DVDs.
Original title: CD/DVD/player burner needs help
My laptop cd/dvd drive / burner, he is no acknolwedge a blank dvd, but it will be a blank cd, it will also play both, im trying to burn a dvd, but it is not acknowling that one is in the burner, it was working fine yesterday... Please help
Hi PatriciaKnight,
· You get the error message?
· What application are you using to burn on DVD?
· Remember to make changes to the computer, after which the issue started?
I suggest you try the following Microsoft Fixit and/or the steps from the following links in the article and see if it helps:
Your CD or DVD drive cannot read or write media
Your CD or DVD drive is missing or is not recognized by Windows or other programs
I hope this helps.
-
hardware acceleration disabled when you try to burn DVDs
- Some capture devices may not work correctly, you can activate
using the direct X diagnostic tool hardware acceleration is the message whenever I'm manke a dvd. - After that, I tried typing "dxdiag" in the enforcement program
- I went to the display option
- where the acceleration of direct sampling is "disable."
- Direct 3d acceleration, it is "disable."
- AGP texture acceleration is "disable."
- I wqant know how to get rid of this problem
Hi vicky9999,
What application are you using to burn a DVD?
Follow the steps below to enable hardware acceleration.
Step 1:
a. right click on the desktop, select settings.
b. click on the Advanced tab.
c. Select the Troubleshooting tab and drag the slider to full.Step 2:
If the problem persists, update your video driver.To see if applicable driver updates are available, visit the Microsoft Windows Update Web site at the following address:
http://windowsupdate.Microsoft.com (http://windowsupdate.microsoft.com )
See also the link below:
Troubleshooting tools and strategies:
http://TechNet.Microsoft.com/en-us/library/cc938991.aspxKind regards
Manasa P - Microsoft technical support. - Some capture devices may not work correctly, you can activate
-
Satellite L500-19 X - code error when you try to burn on DVD
Error code: 380381-26 - 2A 037303 when you try to burn to DVD.
Can anyone help?
Hello
What program you use for burning discs?
What operating system is installed?
What kind of blank DVDs you are using?To be honest, I can t say something about it and description of a sentence is too short in this case.
I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.
-
What is error C00D1197 in windows media player when you try to burn a CD.?
What is error C00D1197 in windows media player when you try to burn a CD.?
Hello
These should help:
WMP - C00D1197
http://Windows.Microsoft.com/en-us/Windows7/C00D1197Windows Media Player Error Message help
http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002Also check this KB which could apply to other versions of WMP
http://support.Microsoft.com/kb/834483I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
8FFD020E and C00D11AB when you try to burn CDs
original title: 8FFD020E and C00D11AB
This error prevents appear when you try to burn CDs. Have tried all of the suggestions. This is a very common errror, a lot of people on the Internet asking about it! I managed to burn a couple of week last CD, after the publication of this error. Now, does not burn yet. This should be fixed! What is the solution?
Hello
Method 1:
You can run the fix - it from the following link.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2:
You can read the following article.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129See also:
How to copy information to a CD in Windows XP
http://support.Microsoft.com/kb/306524
How to troubleshoot Audio CD creation in Windows Media for Windows XP player
http://support.Microsoft.com/kb/306319 -
"An error occurred" appears when you try to burn a CD
After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column). CD were burned on this same burner, but I did not burn in about three months. Any suggestions?
Hello
· Do you have any third party burners installed on the system?
· What is the exact error you get when you try to burn the CD?
· You are able to use the CD drive for playback of the disc?
I suggest you to try with another CD and check if you're able to burn or not.
I suggest you run the fix it is present in the article below.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Apart from that, I suggest you follow the steps mentioned in the article below.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
'Burning disc error' when you try to burn a DVD
Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?
I have a computer laptop advent 9117.
Hi Adam,.
What is the full and exact error message?
I suggest you to refer to the article and see if it helps:
Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."
http://support.Microsoft.com/kb/934544
Let us know if it helps.
-
Windows Media Player 11 says disc not empty when you try to burn
When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc. Sometimes, it will finally work after multiple attempts; sometimes not!
Hi doodle75,
You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?
If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.
To resolve this problem, save the data to a new CD - R or CD - RW.
Reference:
You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11
http://support.Microsoft.com/kb/930370
Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".
http://support.Microsoft.com/kb/927814
Please see the link below for more information
Burn a CD or DVD in Windows Media Player
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
4251 error when you try to burn a cd from itunes
When you try to burn a playlist from itunes, I get the error code 4251. Help! I have recently started doing this but have been using itunes for centuries without any problem.
Post in Apple's Itunes, forums. Google for them.
-
'Cannot find module' when you try to burn a slideshow with the included MP3 files
original title: Hello I receive an error message when you try to burn a slide show. The error occurs only after I have add mp3 music to the slideshow. The error message is "cannot find module '.
Windows 7
Windows DVD makerOverview of the slideshow works until the music is addedMp3 music filesHi SteveC_999,
1. are you able to add different file format music files slide show Windows DVD Maker?
2 did you change on your computer before this problem?
You can use your favorite search engine & download any third-party file converter to convert the MP3 file format to a file format that is supported by Windows DVD Maker.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope this information is useful.
-
Error: 'search Active Captions' when you try to burn the data file on a CD
original title: burn a data file on a CD
When I try to burn a cd, that a window pops up that says search active legends. I am trying to record a data file, no pictures. Help, please.
I solved the problem. It seems that this was a program I had called Photo tags Express. I uninstalled the program and the window 'search Active Captions' went. Hope this helps someone else.
-
ASA5505 - connection reset when you try to SSH IPSEC tunnel
Hello
VPN IPSEC just bought myself an ASA5505 to replace a PIX 501 and having been transferred to the bulk of the previous configuration, I managed to get the two tunnels to work as before.
Unfortunately when I try and SSH for the SAA the right connection restores instantly even when the tunnel is up. It seems as if the ASA actively refuses the connection, if the journal does not specify this. I had always assumed that the traffic on an established IPSEC tunnel has been implicitly trust and not subject to the usual rules of access list.
I can't SSH to the ASA in the 10.0.0.x range, but I can't SSH to a machine on 10.27.0.4 (I know the tunnel is up and working)
Reference attached config (less sensitive information not relevant).
Also - although I'm not sure of the relevance is given the tunnels seem to work - when I get the line "meepnet-map outside crypto map interface" in the reports of the ASA configuration mode "warning: the crypto map entry is incomplete!" even though I provided the access list, peers, and transform-set variables.
Any help gratefully received! :)
Thank you
DAZ
Hello Darren,
Please mark as answer, if your querry is resolved. Enjoy your time!
Kind regards
Ankur Thukral
Community Manager - security & VPN
-
My cd player shooting guard when you try to burn a disc
Help! I'm stupid or what? Windows Vista on a machine fairly new Dell. Model Studio Hybrid 140G. 64-bit operating system. I did the Fix - it store and it comes out fixed in the necessary areas. Now what?
Hi Parisrae,
You did it changes on your computer before this problem?
You can remove and reinstall the CD/DVD drivers & check if the problem persists.
a. Click Start and then click Control Panel.
b. click System and Maintenance and then click System,
c. in the Hardware tab, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
Note: When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer. After the computer restarts, the drivers will be installed automatically.
For more information, please visit this link: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs
Hope the helps of information.
Please post back and we do know.
Maybe you are looking for
-
NB550D - the male female HDMI VGA adapter
Hello I need to connect my Toshiba NB550D netbook to a VGA male cable (this is for projection on screen).I thought I need a VGA female to HDMI male adapter. However, I'm unable to find. All the world is facing this problem before? All that I could fi
-
HP OfficeJet Pro 8720: officejet pro 8720 redirected printer
Hello We try to use a HP Officejet Pro 8720 on a server terminal server Microsoft Windows Server 2008. We have the pilot configured the server terminal server and do not use the easy print driver. The printer prints not even with the easy print drive
-
How to compare the different timestamps and check that one is greater.
Hi guys,. I have a small question about datetime. I have the following data in a table to the timestamp format. 01:00:00.00019/05/2009 01:00:00.00022/05/2009 01:00:00.00023/05/2009 What I want to do is to check the date is higher, then the other. Si
-
Why does the Date not always appear when I hover my mouse by the clock in the taskbar on my Tablet? It displays immediately if I click somewhere near where on the clock. Often it doesn't appear when I go through the clock. Sometimes, it does. I don't
-
Intel (r) 82801BM/BAM SMBus Controller-2443 disc is missing
I had the control panel to add material. At all stages and still nothing. I tried everything I know he told me to. What I look at is Device Type: System Devices, Manfacturer: Intel place: PCI bus 0, device 31, function 3. Driver version: 5.1.2600.551