Tecra A10 - left key of the mouse on the touchpad is "locked".

Similar Questions

• Satellite U940 - left side of the touchpad is locked

  Hello

  I have a Satellite U940-108 for 3 months and I have a problem with the touchpad... On the left side, when I go to press to select something, _the touchpad won't let me no press it_, is blocked and I can't click on the left side.

  Happened from one day to the other, and the part that does not respond to the pressure of the finger is slightly elevated compared to the right of touckpad, which works correctly.

  I hope you can help me to solve this problem, thank you.

  Hello

  So just the left touchpad button is hit?
  To me, it looks like a mechanical part of the button does not work properly.
  Cannot you give advice on the right without checking or touch the button.
  What happens if you apply more pressure on the button?
  You may notice a difference?

  In my opinion, the described problem is hardware related, and as you say, the unit is 3 months old, so in your case I would contact the service technician to correct the touchpad.

• Tecra A10 - poor display through the port replicator

  I have an error with one of my clients, they have 3 x Tecra A10 is bought in the last three months, the last time being last week.

  I get a very poor screen through the port replicator, lines running through the screen almost like the lines of scanning, or RF interference. It happens on all three laptop configurations.
  We have new Phillips 19 "wide and 22" widescreen, I also tried a HP 19 "wide where else in the company. also having the same problem. These monitors are working 100% if hooked up to a computer or DIRECTLY into the laptop A10, as soon as you plug them into the cradle we get lines through the screen.

  I'm learning to communicate with the provider in order to replace it, because I have three already do the same thing, I'm pretty sure that I will receive a fourth with the same error.

  Someone else has the same problem?
  According to me, this issue has been raised on another forum, but was not answered. Does anyone have a solution?

  Please can you tell us which port replicator you use and which port replicator port?
  BTW: you are an authorized service provider?

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• My keyboard and the touchpad are locked, does not respond to what it is.

  My keyboard and the touchpad are locked, do not respond to what it is. I activated the screen keyboard on and it works. It is a G71-340US, Windows 7. I think it happened when the battery died while in a Word doc. computer is turned off. Plugged. Turned, password screen appears, could not type anything in the box. The mouse works. My keyboard and the touchpad are locked, do not respond. Restarted, no help. Pulled the battery, no help. At least I can use the keyboard to the screen!  Thanks for your help.

  Did a restore of the system and all is well! Went back 3 days of the last update of windows. I hope this helps others!

• Tecra A10 - pad touch and the keys do not work on Windows 7 x 64

  We have recently done a new install of Windows 7 x 64 on a Toshiba Tecra A10.
  The operating system has taken over most of the drivers, we had to install drivers for the card reader ourselves.

  Our problem is that the touchpad and the buttons work at all.
  The driver displayed in devices such as manager being installed, but that's all. I even installed the control panel of the Alps (Vista x 64) which works very well.
  Have tried the settings "stick and touchpad are automatically invalidated" when you use an external USB mouse, all to nothing done.

  The equipment worked perfectly okay with Windows 7 32 bit installed.

  Is there a fix here?

  Hello

  Maybe it of just a driver issue, I checked the downloads available for Tecra A10 on page of Toshiba and Windows 7 32 bit there is a newer driver available for Windows 7 64 bits do not (no driver). If you use the Vista 64 bit driver

  What you can do is to test the driver for the touchpad for Tecra A11. There is a version more recent for Windows 7 64 bit of Alps Electric so correct. Touchpad driver is not linked so I sure it will also work on your model of m.

  Take a look at the Web of Toshiba Tecra A11 driver site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Tecra A10 - how to change the RAM?

  Hello

  I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

  The RAM slots are located at the rear of the Machine or below the keyboard?

  Any help will be appreciated.

  Thank you.

  Hello

  Memory module compartment is placed at the bottom of the unit.
  You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

  AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

  Welcome them

• Tecra A10 - how to disable the fingerprint reader when it is docked

  Hello

  I use a Tecra A10 with a 2 Express Port Replicator.
  How can I disable the fingerprint reader when it is docked and still use it when undocked?

  Thanks for your help

  Hello

  As far as I know that something like this is not possible.
  Following this logic, it will be possible to have access to protected files when the laptop is on docking station.

  Either you use fingerprints or not.

• Tecra A7: left side of the laptop is hot

  With the new Tecra A7 for a few weeks. Now, during the summer, it is almost impossible to leave my left hand on the left of the laptop site (44Cel. My thermometer surrenders. The Ventilation exhaust is to close.

  Gerd cordially

  Hello

  I saw the Tecra A7 on photos and on the left side you will find the vents and the fan. I guess that the CPU is placed on the motherboard of the left side.
  The processor produces a lot of heat and therefore the temperature rises.
  The cooling modules generally should work correctly. Please check if there is enough free space around the laptop. It is very important for the cooling of the laptop.

  In addition, the books supporting protection against overheating. If the temperature rises to the critical level the notebook will automatically stop.
  In your case, the laptop is not closed.
  But if you think that the temperature is too high, then you should contact Toshiba service partner in your country. Guys should check the laptop.

• Re: Tecra A10 - USB problem on the port replicator

  I have a Tecra A10 and sometimes, when I work with her, the devices USB stopped responding if they are connected to the port replicator.
  If I connect them to the laptop, they work fine.

  I tried to update the BIOS but now when I turn on the laptop it freezes when Toshiba red letters are displayed on the screen. I can work with the laptop properly deattached starting from port replicator.

  Have you tried to load the default settings in the BIOS after the update?

  If you have external devices connected to the laptop they remove and try again in the duplicator.
  Maybe you should also update your laptop chip set driver. You can find them on the Toshiba site.

• Heating of M6 - 1214tx HP Envy on the left side of the touchpad

  I recently bought a laptop HP Envy M6-1214TX a day ago and who has known the laptop heats up on the left side of the touch pad.

  I tried updating the BIOS and first of all, it was good and then the same question.

  I don't think a new laptop need for cleaning vents, because it is not at all visible.

  In addition, there is no any information available on this particular product as the laptop was launched 2 days ago and mine is the first in the India.

  TECHNICAL DATA: CORE i5 3230 M, 8 GB memory DDR3, 1 TB HDD, ATI 7670 M 2 GB GRAPHICS, 15.6 "SCREEN, BEATS AUDIO

  Hello Mandeep_rawat,

  Your system is not too hot.

  The left side must have a little heat, because this is the side of the processor, but never hot.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  You may have a problem with the fan.

  Here is a link to a number to call HP and see what are the options they have for you.

  I would like to know how everything goes.

  Nice day.

• Satellite P850 138 - left button of the touchpad works most completely

  My touchpad started acting strange.

  left mouse button has stopped working completely and the right hand one worked only intermittently, and whenever I clicked on legs, be it firefox, IE, Safari, or whatever it is in the menu at the bottom such as a folder bar or whatever it is she she closed (no im not not by clicking on the red X)

  Then all of a sudden after awhile he would all start working again. This has happened twice now.
  Restart the system doesn't do nothing there just suddenly starts and stops all of a sudden, but the periods for which it occurs seems to get more time.

  Also the icon of touchpad in the corner with the cross through it has decided to turn its self on a few days ago and found out that the touchpad was disabled on its own and figured out how to re-enable.

  I know this isn't a virus as ive run lots of different anti virus on my system and I was wondering if his time to restart the computer in the store and get a replacement as ive she was only 4 months old

  Its really annoying as im a photographer and rely on this laptop for editing phot o. can someone please help :)
  My model is satellite P850 138

  Hello

  My personal opinion, you should not replace this laptop until you tried not to workarounds.
  First you don t know if its software related issue.
  The point is that if its software delivers, you could solve it easily recover the laptop using the recovery of HARD drive option.

  Please try to configure the computer laptop initial configuration using disk HARD recovery.
  Press F8-> choose fix my computer-> drive HARD recovery

  If HARD drive recovery is not available, press F12 and check if there is a HARD drive recovery option.
  After the system recovery, make sure that the touchpad and other features of the laptop.

• Satellite A500-138 - warmer on the left side of the touchpad

  Got a Toshiba Satellite A500-138 and it get hot in the left side of the touch pad.

  Can some help me?

  Hi atmo.

  Well, I think that some some areas on the laptop are always a bit warmer than other regions. I think that it s according to the hardware parts where is the cooling module and find CPU, graphics card, and chipset.

  You have problems? She is turned off without warning?

  What you can do is try to clean the cooling system using a jet of compressed air. This can blow the dust from the cooling fans:
  http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

• HP pavilion g6 heating on the left side of the touchpad

  I bought a HP Pavilion g6 mobile 2320tx two months ago and recently I found this laptop is hot on the left side of the touch pad.

  Hi p_kumar010,

  Please learn about PC overheating and the troubleshooting steps to resolve the problem of the documents below.

  Fan runs continuously, the PC working slow than expected and generates heat: http://support.HP.com/us-en/document/c01007591

   

  Reduce heat and the fan noise by cleaning the air vents: http://support.HP.com/us-en/document/c01657439

   

  Why computers generate heat: http://support.HP.com/us-en/document/c02655320

   

  Tips to use, carry and protect your laptop: http://support.HP.com/us-en/document/c01507270

  Please let me know the results so that I can try to help you further. Thank you.

  I wait to hear from you.

   

  !------------------- Please click on the star of CONGRATULATIONS on the left to say 'Thank you'.

  Check the box "Accept as Solution" if it solves your problem. Thank you-----------------------------------------------------------------!

  I am an employee of HP.