Tecra A50 - Abboud - 19 update Windows 10 is not compatible

Hello
my unit is Tecra A50 - A - 19 M and I booked the upgrade to Windows 10 but if I check compatibility, the result is: "device is not completely compatible: GPU Intel(r) HD 4600.» You will have problems with the screen. »
What can I do?

Concerning

In my opinion, you should wait until the Windows 10 will be officially released by Microsoft and you must wait until the Toshiba would publish details of these updates for Windows 10.

This has been done in the past for Windows 8, as well as for Windows 8.1 and that's why I think that this information will be available for Windows 10 too.

Tags: Toshiba

Similar Questions

  • My automatic updates Windows Vista do not work? Error: Windows can't check for updates

    original title: My automatic Windows Vista updates do not work?

    My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

    I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

    And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

  • Error database that can be updated windows detected 0x8007000D - not been fixed in Windows 8.

    Original title: slow startup and commissioning, also blocks windows 8

    My computer began to take 10 minutes to start and run. then hangs every now and again when I use it.

    I had problems installing an update and I thought that was the problem, so I followed the instructions and installed the update (KB2855336) on a clean restart. When I put the settings back to normal reboot I see the update succeeded, but the computer is still a good 10 minutes to restart.

    I tried to do a repair, but this is notauto-start.

    I tried to run a sfc/scannow and that froze the verification step 100%, I have waited a long time, checked in the Task Manager and saw that he was inactive and if you click end task.

    My Task Manager shows 99% or 100% use of the disk.

    I tried to do a system restore to a point in mid-July and which failed, error 0x80071a90 code.

    I followed the advice of someone to uninstall the update and restart twice, but the problem persists.

    What can I do to fix this? I use my laptop to work and so I need this problem as soon as possible.

    I just tried in safe mode and also it took forever to start and run. I tried different jumpers in safemode, maintenance of the system not found no problem, windows update however found two:

    Error in database that can be updated windows detected 0x8007000D - not fixed

    Windows Update, the components must be repaired to no fixed

    Help, please!

    Thank you

    Hello

    This problem is usually caused by Windows Update corrupted downloads or installations. However, virus infections are also known to cause this problem. Before scanning for viruses, please try these troubleshooting steps and check whether the problem is resolved:

    Method 1: reset the Windows Update components and check if the error persists:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058/en-us

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    Method 2: use Deployment Image Servicing and Management to fix Windows Update errors.

    To do this, follow these steps:

    a. press the Windows key + C and type cmd in the Search box.

    b. right-click on command prompt and select run as administrator.

    c. type these commands and press enter after each:

    DISM.exe / Online/Cleanup-image /Scanhealth

    DISM.exe / Online/Cleanup-image /Restorehealth

    d. close the command prompt, and then run Windows Update again.

    Please get back to us with the State of the question.

  • Windows 10 is not compatible with genie, someone has ACTUALLY a solution?

    I just updated my computer laptop microsoft Windows 10 because I was stuck with 8.1 for so long, super happy until I went to redownload genius because it deleted a little after the update, and now it is not even freaking work with windows 10. The new SUCKS update because it is not compatible with the latest technology for windows... is there actual patches? I went through the discussion after discussion and nothing really works or it is not found. Help!

    Hi @skunkylouou,

    We apologize for the inconvenience, as the cause of the problem has been just recently discovered. Rest assured, we are working on a fix for future updates. Have you tried the temporary work around? If this isn't the case, you can follow the steps below.

    1. install the latest version of NETGEAR genius. You can use the below download link.

    http://Netgear.com/Home/Discover/apps/genie.aspx

    2. Once you have successfully installed the program, go to C:\Program Files (x 86) \NETGEAR Genie\bin

    3. remove the drivers folder.

    4 download the drivers from the previous version of NETGEAR engineering using the below download link.

    https://drive.Google.com/file/d/0Bz-pjmQaYmk6bEVUbmxtUTY0MW8/view?USP=sharing

    5 unzip the file to your favorite place (Office would be easy to locate). It will contain the drivers folder.

    6 copy the drivers folder you have just unpacked and navigate to C:\Program Files (x 86) \NETGEAR Genie\bin

    7 paste the folder drivers.

    8 restart the genius of NETGEAR program

    Kind regards

    Dexter

    The community team

  • I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

    I tried firefox update, but it is not compatible with leopard op. If I try to re - install the old version my favorites will always be there?

    Yes. This should not be a problem.

  • We get an error "windows 7 was not compatible with my computer" during the download of Windows Media Player for Windows 7.

    * Original title: Windows Media Player for Windows 7

    It seems that my computer (windows 7) did not come with Windows Media Player. When I tried to download it, it has stated that windows 7 was not compatible with my computer and gave me a windows xp download. Why is this and how would I be able to get the version for windows 7?

    Hello

    What version of Windows 7 do you have? What is an "N" or "KN" version that doesn't include WMP 12?

    Start - type in the search box-> WinVer find upstairs and double-click it.

    Media Feature Pack for Windows 7 N and Windows 7 KN (KB968211)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=31017ed3-166a-4C75-b90c-a6cef9b414c4&displaylang=en

    ========================================

    If this did not help to tell us which version of Windows you have.

    ========================================

    Check the Task Manager to make sure that WMPlayer.exe is not already running, and if it is complete the process
    on this subject. Click right tab taskbar - TaskManager - process.

    -------------------------------------------------

    Make sure that Windows Media Player is on.

    How to enable or disable the features of Windows 7
    http://www.SevenForums.com/tutorials/5023-Windows-features-turn-off.html

    -------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ---------------------------------------------------------------

    Do this to reregister the Jscript.dll and Vbscript.dll files.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    type or copy and paste-> regsvr32 jscript.dll
    Press enter

    type or copy and paste-> regsvr32 vbscript.dll
    Press enter

    Restart and if all goes well, it will run now.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

    I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

    Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

    TT2

  • H - 8 1287 c HPE: updated windows 7 does not?

    can't seem to get the windows update to work, update printers won't work, or try to download microsoft fix it won't work?

    sleep not to see the place on the start list?

    printers not updated will not work?

    I tried several update issues but does not?

    new total protection defense virus shows have no problems with viruses or malware?

    I have tried to reinstalled 7 pro didn't work?

    delivered with 7 addition recovery disc at home won't work?

    have also 7 ultimate drive I was wondering if will work?

    Thank you

    Tom

    Download the graphics radeon hd player directly from AMD. Run the automatic detection of AMD graphics tool. He will find the best player for your Windows 7 operating system.

    https://www.Google.nl/URL?SA=t & rct = j & q = & esrc = s & source = web & cd = 2 & cad = AJLN & uact = 8 & ved = 0ahUKEwjSx5azp__OAhWLDBoKHdESAWgQjBAIRjAB & url=http%3A%2F%2Fsupport.amd.com%2Fen-us%2Fdownload%2Fauto-detect-tool & usg = AFQjCNEp9TJEPeiXIS0Tl_hhH-j3qOISdA & bvm = bv.131783435, d.d2s

    Windows 7 Ultimate has more features than the home and professional version. It's better.

  • Problems with latest updates Windows (KB) do not install & repeated notifications via the taskbar icon

    Hello everyone,

    In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.

    Description of the problem:

    Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed.  I went to the Windows Update site to check my editing history.  He showed the green/white checkmarks next to all 3 updates.  The record also showed that updates have been tempted 3 times during the night.  After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '

    To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.

    Corrective measures attempted:

    1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).

    2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message.  (I could RECORD the program on my desktop... just couldn't run the establishment).

    3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB).  Every time - a message appears indicating that the file is not found.

    4 looked at the Add/Remove Programs list (with the Show updates checkbox checked).  No updates KB mentioned above could be found.

    5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues.  (SAS and MBAM are used only as scanners on request).

    This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before.  On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.

    (Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.)  I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates.  They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.

    My questions to the community:

    1. is it possible to download & install these 3 updates?

    2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?

    System Specs:

    Desktop Dell Dimension 3000 Tower;  WIN XP Pro SP3.  2 GB OF RAM;  3.00 gHz CPU;  Outpost Security Suite Pro.  MBAM Pro (on request only).  SAS (on request only);  SpywareBlaster;  IE8 & FF

    Thank you for your time and help, review!

    Pete C.

    See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

  • Updates Windows 7 does not error code 80244019

    How to fix this update?

    Windows could not search for new updates of 80244019

    This tool says:

    If you receive this error when checking for updates in Windows Update, Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for Windows Update to run at its next scheduled time.

    If this does not work, try to add the Windows Update Web sites to your firewall exceptions list, and then rerun the update of Windows.

    Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

    • http://windowsupdate.Microsoft.com
    • http://*.windowsupdate. Microsoft.com
    • https://*.windowsupdate. Microsoft.com
    • http://*. Update.Microsoft.com
    • https://*. Update.Microsoft.com
    • http://*.windowsupdate.com
    • http://download.windowsupdate.com
    • http://download.Microsoft.com
    • http://*.download.windowsupdate.com
    • http://wustat.Windows.com
    • http://NtServicePack.Microsoft.com
    • https://*. WS. Microsoft.com
    • http://*. WS. Microsoft.com

  • Updates Windows 7 does not download

    Hi all

    I have Windows 7-64 bit version and I normally have updates of Windows set to warn me when there are new updates, but do not install them - let me decide.

    I see 21 updates and now it is stuck on just that. I even set to automatically install updates, restarted the computer and tried this again once and no dice... part of these updates is my Windows Defender, which I use for anti virus, so I would really like to get it working again.

    Does anyone have an idea on what is current, or does not, as is the case? Thanks in advance... Oh, by the way, the green part of this bar is moving from one side to the other... so he said to me that he is not locked.

    Go here for the solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  • Update Windows 10 could not be installed

    Windows 10 could not be installed and displays the error code: 80240031. Download is 100% and the error message shows. Please someone solve this problem.

    Thank you

    Review:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • My ultimate key update windows 7 does not work

    Update my key does not work.

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us
    ----------------------
    Have you installed a new hardware or software since you started facing this problem?

    Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

    What Antivirus utility you installed?

    What's your date and time correct?

  • I am using windows 7 home that Basic I have updated windows, I'm not able to use bluetooth

    Hi I was using windows 7 home basic in my laptop, but a few days back I've updated windows, from this moment I am not ablt to use bluetooth. How to do ok. I am not able to trouble shoot problems too.

    See:

    Solve problems Devices Bluetooth in Windows 7

  • Updated Windows 8 do not install on restored factory new facility.

    I recently factory to restore a computer, which was installed with Windows 8. I tried repeatedly, apply updates Windows 8 to be able to install Windows 8.1

    What baffles me, is how installs it fail on a computer 'brand new '. It is without anything installed after the factory restore. Whenever I try to apply the updates, I get the message "failed Windows Setup updates. Restoration of the changes. Do not turn off your computer. »

    I tried to install updates by using the boot option, ran the update problems (claims the problems have been fixed), with and without the (Norton) antivirus running, tried sfc/scannow (no problem), chkdsk /r (no problem), memory (memory tested fine) test, drivers updated, deleted the software AMD catalyst without success.

    All by performing the updates, only the mouse and software (wire, wireless not) are connected to the computer. I tried all the possible solutions I found in the forums to find a solution. I don't understand how a facility, which is supposed to be direct from the factory, can not install updates. Is it possible to apply all updates, such as service packs earlier, or install Windows 8.1 without having first apply updates?

    If it helps, it's a HP Pavilion 20, with a processor AMD E1-1200, 4 GB RAM, 64-bit Windows 8.

    I recently factory to restore a computer, which was installed with Windows 8. I tried repeatedly, apply updates Windows 8 to be able to install Windows 8.1

    What baffles me, is how installs it fail on a computer 'brand new '. It is without anything installed after the factory restore. Whenever I try to apply the updates, I get the message "failed Windows Setup updates. Restoration of the changes. Do not turn off your computer. »

    The problem is the 8.1 Windows deployment by the Windows store is just buggy, leading to problems during installation and reduced performance. Also, you are using an HP printer, and therefore its probable that the original image has a lot of bloatware pre-installed which does not help. The particular system you have purchased must have also taken some time to sell because most of the systems were sold with Windows 8.1 opposed to 8 for some time.

    You are advised to clean the Windows 8.1 with 1 update installation directly, ignoring all the hassle of upgrading to Windows 8.1 via the Microsoft Store. To prepare a Windows 8.1 with 1 FAT32 USB Bootable update a UEFI BIOS and GPT partition scheme, see here:

    http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

Maybe you are looking for