Tecra A8-185 HARD drive works only in PIO and DVD in UDMA2 mode

Similar Questions

• When I imported the photos from the hard drive, some only partially loading and show that half of this picture?

  When I imported the photos from my hard drive some only partially loaded with only half of the growth of the photo?

  Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > import images and test them.

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Tecra S3: SATA hard drive not recognized after XP updates

  Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
  After the reboot required for updaates windows generates a BSOD.

  I've traced the error and found that the system can not find the hard drive.
  Even when I use the XP cd and restore/repair console without a hard drive is located.

  When I check the BIOS hard drive is there.
  I removed the hard drive and used an external case and determined that the hard drive works fine.

  Hello

  Tecra S3 supports RAID.
  In order to install Win XP RAID driver is needed!

  The RAID driver can be found on the European driver Toshiba page.
  It s a v 1.01.0005 for Win XP.

  You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
  Google for nLite for more details.

  Welcome them

• TOSHIBA external drive works only with Macbook

  Hello

  I have a 1 TB external drive that I used on my 2007 Macbook without problem until recently when he decided suddenly stop working. Nothing has been changed in the Macbook, I read in some places that there is a problem with enough power of drawing from the usb port to power the player, but have you tried going through a usb port and using a longer replacement cable...

  All advice welcome!

  Thank you

  The question is: is this just a problem of USB connection or maybe the HARD drive starts to crime

  I mean, early or late each HARD drive is going to die, and it's just a matter of time and usage of HARD drive

  I recommend you to connect this drive external DRIVE on another computer just to check if it will recognize

  but to be honest, the question smells like a hardware malfunction.

• 3 TB hard drive works in Pavilion p6110f

  Hello, I saw online the other day a hard drive 3 TB for sale and thought 'Hot Dog', I have to have one of these, I went and ordered one.  It takes me a few days later and I thought 'cool' is going to have a boot of 3 TB drive, or so I thought, at least after several attempts I realized that my hardware just don't like the 3 TB drive.  Ive been looking on Internet and Im seen that there is a problem with the large size of this hard drive.  Something about the chipset and bios to have to support.

  So here's my Question!  The hardware I will support 3 TB hard drives up to their full potential 3 TB?  I was able to format with windows as a secondary drive but he he only recognized as a hard drive to Go 746,39.

  If my hardware can support recognizing all the 3 to how I have to format it?   What process should be done to get windows to recognize it?

  My hardware:

  Make and model: HP Pavilion NY428AA-ABA p6110f
  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz 2.60 GHz
  OS: Windows 7 Edition Home Premium 64-bit /sp1
  Memory: 6 GB of ram
  BIOS: American Megatrends Inc. 5.39 06/05/2009
  Chipset: Intel P35/G33/G31 rev A2
  Southbridge: Intel 82801IR (ICH9R) rev 02

  Hard drive Info:

  Western Digital Caviar Green 3 to
  WDC WD30EZRX-00DC0B0

  driver: Microsoft
  Date: 21/06/2006
  version: 6.1.7600.16385

  any help or info is appreciated.

  The BIOS displays the total size of the hard drive 3 TB? Which version of Intel Matrix Storage Manager or Rapid Storage Technology driver are you using?

  Go to the Intel Download Center, automatically scan for downloads and install all updates for your system. Make sure that you run Intel Rapid Storage Technology v11.6.0.1030

  Please see the following Microsoft articles for information and instructions on the use and formatting a drive as GPT.

  With the help of GPT disks
  Windows and GPT FAQ

• Hard drive works 100%

  I have an Inspiron N5010 A04, OS Windows 10 Home.  The hard drive works 100% for minutes at a time as shown in the Task Manager Performance page, the player lists that ST9500325AS 500.11 GB, is there something I can do to reduce the amount of time the HD works 100%?  Either way when I try to run Diagnostic Dell programs the system runs to get your Tests and then stops.  Any idea on this?  Thanks for any help.

  Thanks for the reply.  He does it all the time and it is not an update.  I can recognize update.  The pc would work fine.   The hard drive begins to run 100% and continues for several minutes then goes back to normal operations.  I check with the Task Manager and you can watch it work 100%.  I don't do any resource heavy operations at a time.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my 1 TB hard drive shows only 500 GB size

  I recently had to use this backup to another PC hard drive hard drive is only 500GB, so when the imaged system it I lost the other 500GB, I guess that. I have strength to know that he was going to take the space like that or I would not have done to this PC. When I reinstalled windows and reformat the disk, it recognizes that the 500. I even went in disk management and other programs to try to unlock the other and watch her do not back up.

  Any thoughts on how to retrieve other that find a system of 1 to copy image and load on this pc?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that 500 GB of space on your disk to 1 TB is not present even after formatting. We will try the following methods and check.

  Method 1:

  
  Step 1: Check if the problem occurs in safe mode:

  Please refer to: , start your computer in safe mode

  Step 2: If the problem does not occur in safe mode, then you can perform a clean boot and check.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 2: This issue could be due to malicious programs in the system, so you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• 1 TB external hard drive works on XP but not Windows 7

  1 TB Toshiba external hard drive.

  It works on my laptop that runs Windows XP bot not on the laptop that is running Windows 7, if the hard disk works. It also works on Vista.

  My Seagate (320 GB) hard drive works on the Windows 7 laptop - so the USB ports are not defective.

  When I plug the hard 1 TB drive that it appears not on the Manager list of devices, or the title of the disk management, still green light from the disk hard flashes and lights up like it normally does when plugged into the laptop XP.

  I have read all the forums and tried the following: edited the Registery values for mass storage devices USB (deleted and lower filters);  Edited the "Usbstor" INF file as suggested check, the Toshiba site for any compatibility issues, and they have suggested that it is a problem of windows 7, given that the player works on other platforms.

  Because the disc is not visible in device etc Manager I can't try the other options.

  Any input would be appreciated

  I found the problem to be with the controller Toshiba uses on their external hard drives.

  I removed the hard drive Toshiba of the carcass, put it in an envelope of SeaGate (thus using a SeaGate controller) and it worked fine.

  To my knowledge there is no software around HD Ext Toshiba and W7 work. Take the HD out of the envelope, buy a cheap eSATA to USB connector & problem solved.

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. The recycled player I

  I bought a whole new office 27 "Mac provided with Adobe CS6. Everything worked like a charm until the 1 TB hard drive, developed a bad sector and the Apple Store reinstalled a new I had extended warranty with them. They are recycled the disc immediately (like crazy, I don't ask for this return to get the data off it.) But fortunately, I have all my data on CrashPlan. I downloaded it and it was working fine except that I downloaded it on the desk and not the original location so he had succeed. I also have an external 1.5 TB drive that I wanted to make it bootable, so I installed Mavericks 10.9.3. Then I advanced and installed on disk newly installed too.

  I think that because I have a new reader that adobe thinks, I have a new computer. I bought the 27 "Mac new on Ebay and it came loaded with the software, including CS6. I have a serial number for CS6, but Adobe says that it was not valid. (I've owned CS2 and CS4 now CS6 that came preloaded on the Mac by the seller who told me that the software has been registered for the Mac?

  I'll re - download the backup to the original location but this time (I still don't think that it will work with Adobe.) What can I do about it?

  iMac 27 inches, end of 2012

  Processor 3.2 GHz Intel Core i5

  Memory 32 GB 1600 MHz DDR3

  Graphics  NVIDIA GeForce GTX 1024 MB 675MX

  Software  OS X 10.9.3 (13D 65) @.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• I copy / paste a file from a hard drive to a usb port and now I lost the USB I get the hard drive?

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  Tuesday, June 26, 2012 13:21:43 + 0000, MarvinBester wrote:

  I move a file from a hard drive to a usb port and now I lost the USB I get the hard drive

  "Deleting" a file does not actually delete it marks just the space
  also available to be used. There are third-party programs that can
  sometimes recover deleted files. The problem is that the space used by
  the file is likely to be replaced very quickly, and it makes
  the unrecoverable file.

  So your chances of successfully recover this file are decent if you
  Try it again immediately after the deletion of it and go quickly
  downhill from there. If you have used the computer since then (for
  example to write this question and read this answer), your chances may
  be very poor now.

  But if the file is large enough, it's still worth a try. Stop
  using the computer in question immediately, if you have not done
  already. Download an undelete program (and here's one:)
  http://www3.TELUS.NET/mikebike/restoration.html but there are several
  others to choose from; Do a search) on a friend's computer (do not
  it on yours because that would overwrite the files you want
  Undelete) and bring it to you on a CD or thumb drive to try.

  If that fails, your only recourse is to bring or send the disc
  a company of professional file recovery. This kind of service is very
  expensive and may or may not work in your case.

  Ken Blake, Microsoft MVP

• Replaced the hard drive, need help with drivers and utilities!

  Hello

  Yesterday, I replaced my old hard drive with a new WD, and I reinstalled Windows Vista.  Everything goes fine until I jumped in the utilities and drivers (Resource CD) supplied with the laptop.  I guess I thought that the CD all the work, would do to reinstall all the necessary drivers and utilities...  Now I'm stuck with a laptop computer that cannot connect to the internet, and the screen is too big.  I don't know there is more wrong with my laptop than meets the eye.  On the CD of drivers & utilities there the list of drivers and some of them have check marks, others do not.  I tried following some online course on which those who/what order to upload, but I don't even have some recommended drivers on the Dell.com site (specific to my Inpiron 1545 model)!  I know that I could download them immediately the site, but I don't even have wifi to do.

  In addition, I read the performance of a Dell Factory Image Restore and I tried it.  When I get the black screen with no option, I have to click on "Repair computer" but the option is not available either... I thought that maybe it would be an easy way to restore my laptop (readers and all) to the original settings.  Maybe the option is not there because my computer is practically empty, with nothing to restore? All I have on my laptop at the moment is Windows Vista 64 bits and drivers a couple that I don't know much.

  Bit of help and advice would be great.

  Anna

  Click on the link below, Guides of operating system Installation.

• hard drive partition does not open and his FIRST in format

  My hard drive works fine in my computer except a partition that I can not open and it is in RAW format.

  When I connect this hard to another computer, you try to transfer data, it appears as a single unit without a score.

  It would seem that the reader doesn't have