Tecra M2 - unknown devices - cannot find drivers

Similar Questions

• Satellite L300-19Y: problem GPU - device cannot find enough free luipermettant

  I have an error message on my display Adaper stating,

  «The device cannot find enough free luipermettant it can use (code12).»
  If you want this device, you will need to disable one of the other devices on the system. »

  It is a Satellite L300-19Y with graphics Mobile intel 4. I have updated to the latest version of the driver.

  The screen is very blurry at the moment.

  Please help with a solution if possible.

  Hello

  I found your other thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=250126

  You tried to install an ATI driver on this laptop.
  I don't know if this would affect the functionality of the OS, but it seems that you get an error message during the installation of the Intel driver, then perhaps you have confused the OS installed some drivers wrong

  Have you used the driver from the Toshiba driver page?
  If this isn't it!

  You must first uninstall the driver in Device Manager and then reboot the laptop.
  After the new reboot, you should check if you could install the driver once more

• Satellite L300 - 29 X - device cannot find enough free resources

  I recently had to reinstall completely Windows Vista Home Premium, and before that, I was able to play games for example: World of Warcraft, Counterstrike Source;

  Since reinstalling Windows my display driver adapter doesn't work. It displays error "this device cannot find enough free resources that it can use. (Code 12) »
  And I m stuck trying to fix this problem. I tried some display drivers, but I think that I have I don't have the right one for my model.

  Thank you very much, Jessica

  Hello

  Microsoft says that this error message especially if two or more devices have been attributed, ports of entry/exit (e/s), the same interrupt, or the same Direct access channel in memory. The assignment was made by the basic input/output system (BIOS), the operating system, or a combination of both.
  This error message can also appear if the BIOS did not allocate enough resources for the device.

  To resolve this problem, you should go to Device Manager and should remove/uninstall the graphics card from the list of devices.
  Then, you should reboot the device and need to reinstall the driver of compatible graphics card.

  PS: Take a look at the BIOS. If a newer version is available and then try to update.

• Sakar 26480 Aqua Shot digital camera underwater cannot find drivers

  Original title: Sakar 26480 Aqua Shot digital camera underwater

  I tried everything to download my photos this device power off and nothing works comes with windows cannot find drivers even though I put in the software disc and I downloaded the thing to install directly on the net is there I click on it to tell him where she is and always comes with no driver his driving me crazy please help

   

  Hi nicolamitchell,

  1. were you able to use the front camera with no problems?

  You can try to connect the computer vista different camera and check if the error occurs.

  You can try to plug in the camera and check the updates of windows install the drivers.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  You can also check the link of the manufacturer and try to download the drivers and check.

  http://www.Sakar.com/p-239.aspx?CategoryID=170

  You can also visit the following links and see if it helps:

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Hope this information is useful.

• Code 12: This device cannot find enough free resources that it can use

  Original title: Please help me with this error   The device information

  Name: Intel G41 Express Chipset ID: PCI\VEN_8086 & DEV_2E32 & SUBSYS_2E321849 & REV_03\3 & 11583659 & 0 & 10 Error code: 12

  Hi RoseLover,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Error code 12:

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause:

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  I suggest you download the latest drivers for the graphics drivers on the Intel site and see if the problem is resolved. Check the links below.

  http://www.Intel.com/support/chipsets/sb/CS-022768.htm

  http://www.Intel.com/support/graphics/detect.htm

  Apart from that, I suggest you to refer the below link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

• Satellite Pro A300: code 12 - this device cannot find enough resources

  I use Vista Business 32 on my Toshiba Satellite Pro A300.

  Recently, I plugged my parallel to my laptop port adapter and the Device Manager, I had a device that said conflict error, "this device cannot find enough free resources that it can use. (Code 12).

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can anyone help me please with sorting on this problem?

  TEMI

  Hello

  This is a typical mistake if both devices have been attributed, ports of entry/exit (e/s), the same interrupt, or the same Direct access channel in memory.
  This error message can also appear if the BIOS did not allocate enough resources for the device.

  If seems that the resources are already used by another device, and so there is a conflict with the parallel port adapter that you have installed manually.

  I think you can only solve this check other devices that use the same resources and then that disabling in Device Manager.

• installation of window cannot find drivers (bootcamp)

  First I found the problem on appleSSD.sys, someone said to use oldbootcamp 5.1.5640 (I use macbookpro 2014 middle) to fix

  1 use Boot Camp Assistant, prepare the USB key. Select the first two points, then prepare the drive. Boot Camp Assistant to quit smoking.

  2. in the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  3. spread the former Boot Camp drivers (they are a zip file) on your desktop.
  4. copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.
  5 open Boot Camp Assistant and only select the third option, install Windows 7.
  6. sit and relax because the installation takes place.

  BUT! is not working and I found new window problem installation cannot find drivers

  Sorry for my bad English

  Can you post a Finder of listing of the files on the USB key? Please show only the first level. Just delete the folder AppleSSD64.

• HP Compaq 6910 p: 6910p "this device cannot find enough free resources that it can use. (Code 12) »

  Under hardware and Sound/devices and printers, I have a yellow triangle with my 6910p icon.  Right click on the "hardware" tab States "this device cannot find enough free resources that it can use. (Code 12).

  I've recently upgraded the operating system to Windows 7 Professional.  Everything works ok but I show this yellow triangle where the devices are displayed.  When I look in Device Manager/Mobile Intel (r) 965, I get a window saying 'Problem detected with Mobile Intel (r) 965 Express Chipset Family'.   The next window States: "the device cannot find enough free resources that it can use. (Code 12).  If you want to use this device, you have to disable other devices on the system once".

  How can I go about doing so, the yellow triangle disappears?

  I tried to reinstall device Base system SP46972 and SP45738 of the video driver.

  Not sure if this is related, but I also have a black screen with a 1 in. border on the left and the right, which was not the case when Windows XP is the operating system.  I also need to solve this problem as well.  Searches on Google did not find the solution, so I hope someone can provide the answers to these two questions.

  

  Glad to hear that you would have recommended as the next step.  It has proved to be a challenge, but one that we have managed to find solutions for.    Thanks again for all your help and patients.     Carl

• HP dv6-7211tx envy: cannot find drivers

  Cannot find drivers for my hp dv6 7211tx envy page. The old page drivers now redirect to a page of troubleshotting. Google did not help either.

  Hello:

  I don't see that W8 drivers and a together incomplete W7 drivers listed for your model.

  http://support.HP.com/us-en/product/HP-envy-DV6-7200-notebook-PC-series/5296055/model/5317710/drivers

  You should try to use the W8.1 of the hardware manufacturer support pages and hope drivers, working for whatever drivers you need.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• Tecra M7 unknown device after installing Win XP

  Hello

  I have a Tecra M7 Tablet PC.

  After installing Windows XP Tablet PC edition and all the drivers for the Toshiba Homepage there are 3 s "unknown device" in Device Manager.

  I installed the Ethernet drivers, but I do not see the adapter to the source 'network '.

  What can I do to fix this?

  MFG pizzaMAN

  Since I n don't know what you mean devices I can't provide you with any information on the necessary drivers

  You're talking about Ethernet driver you are meaning the LAN or WLan?
  Usually the two cards (Wlan & Lan) should appear in devices-> network cards Manager
  If there is an unknown device then it would mean that one of the pilots was not installed.

  On the European driver Toshiba page, you will find two Intel LAN drivers.
  Check both!

  I put t know what your laptop wireless network card is because the Tecra M7 has been equipped with various wireless network cards, but all the drivers (Intel, Atheros) are placed on the page and you should try it!

• Tecra A3: unknown device - PNP ID ACPI\TOS6209\2 & DABA3FF60

  Hello
  I have a Toshiba Tecra A3 with an unknown device with PNP ID ACPI\TOS6209\2 & DABA3FF60
  We're gone use Microsft BDD to deploy the client of the Organization so that we cannot use the recovery CD.

  I saw on another Tecra is something like logical Toshiba device

  fought for it in a couple of days.

  Does anyone know were to find the driver for it?

  Concerning

  Thomas Ahlstedt
  ---------------
  [email protected]

  I do not know what device might, but this Toshiba document should help you identify the unknown device in Device Manager.
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Then, you can visit the page of the Toshiba driver and download the necessary driver that is necessary for this device.

• Connection cricket MSGM8 phone USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, but cannot find drivers

  Original title: badminton MSGM8 phone to the USB port on my laptop to pis draft.exe

  connecting a phone to cricket MSGM8 USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, trying to locate the software for Qualcomm CDMA Technologies MSM, but can not find the drivers, any fix?

  Hi ChristopherStout,

  (1) what is the complete error message you receive?

  (2) is limited only to Cricket MSGM8 phone?

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: If you provided drivers\software disc from the manufacturer of the computer, go ahead and install it.  You can see the steps outlined in the article below

  How to troubleshoot unknown devices listed in Device Manager in Windows XP
  http://support.Microsoft.com/kb/314464

• NOR PCI-6010 unknown can't find drivers

  Sorry for this simple question.

  We have a PCI-6010 in a Windows 7 machine.  DAQ MAX v5.5.0f0 running.  Device Manager sees it as an unknown device.  DAQ MAX sees it as "Windows was not a driver associated with your device" the guy who said in a said it installed perfectly.  Since then, he has installed a USB 3.0 PCI express.  I tried to reload the driver of all the ways that I never did in the past (he never finds the drivers even on the Driver DVD) and is still not recognized.

  Anyone can remember by the missing piece of the puzzle?

  Thank you

  Paul

  The version of MAX is not relevant. You must install DAQmx and if you do not install, give the version number if you continue to have problems.