Tecra R700 - HDMI not working not

Similar Questions

• Fixed satellite A200 HDMI not working not not on TV

  Hello, can someone please tell what to do for my HDMI to work.

  Previously, it works on all Tv with HDMI but for some time
  now when I connect to a TV does not work the screen turns blue. You can see something to configure.

  Hello

  Usually there are not many options that must be changed.
  Connect two devices (TV and laptop) with a good HDMI cable.
  Choose HDMI channel on the TV
  Turn on the laptop and press FN + F5 repeatedly until photo appears on TV.

  That is ;)

• Tecra 8000 does not initialize to top

  My Tecra 8000 will not initialize-to the top (previously worked fine).
  1. the Red "TOSHIBA" icon comes up, then it just "grey screens" on me.
  2. I can start up to the A: drive using a bootable floppy and I see the hard drive (C:\) and it seems OK.
  3. I checked the settings of BIOS (ESC, F1), and they look OK.
  4. I have Windows 2000 installed.

  Any suggestions? Thanks, Neil

  Hello

  It seems that the laptop properly the Toshiba screen.
  In this case, there should be no problem with hardware or BIOS.

  Eventually switch you to the external display? I would recommend the connection of the external monitor to check if something pops up.
  But if it doesn't help, so possibly damaged HARD drive could be responsible for this issue.

  Have you tried to boot from the CD? You see something?

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Tecra A8 does not power up - no POST

  Hi guys

  I have a toshiba Tecra A8, which begins the fans and has kyboard controls lights and other things but don't post.

  Any ideas?

  Hello

  Tecra A8 can not pass the MESSAGE correctly?
  This means that a hardware problem on the motherboard has been detected.

  Try this:
  -Remove the battery, disconnect the adapter
  -Wait 1 hour
  -Connect the two parties to laptop and try power upward.

  If this doesn't help, then you should check the RAM modules.
  If the laptop won't start not even with new modules, then a motherboard problem would be possible.

  Welcome them

• Why Tecra A3 does not start from CD/DVD?

  My laptop Tecra A3 does not react to the BIOS setting asking at the start of the CD/DVD.

  CD/DVD is the first place in the list of bootable devices (defined through F12 in boot sequence) the operating system starts with the HD. I have a chance to start with a bootable CD!

  The configuration is the following:

  Tip: TOSHIBA EAT10/EAT20
  BIOS: TOSHIBA V2.80 10/25/2006

  Any advice is welcome!

  Thanks in advance

  Antonio Giarrusso

  Have you tested with different CD bootable?
  Also try to start computer laptop using F12 and choose ODD as the first boot device.

  You can use ODD in Windows OS preinstalled?

• Tecra M4 - does not start, no image on the monitor

  My Tecra M4 will not start.
  When I turn it on, all I hear is a quick check of the DVD player, a hum of hard drive and fan.

  I tried an external monitor and still see nothing.
  I also changed the ram, tried to start with disconnected HARD drive disconnected RTC battery for a while.

  I don't see anything on the screen at any time.

  Any suggestions?

  Hi TheXenon,

  In your case, I'll try this:
  Remove the battery and the AC adapter at least an hour. Then reconnect the two and try to restart your laptop.

  But at the moment for me that sounds like a hardware malfunction and you need help from a service allowed in your country. :(

• Tecra M5 - will not be in hibernation or standby to standard Select-Bay drive inserted

  My Tecra M5 passes not in standby or sleep mode when it is selected in the menu start/stop. This is only a problem when the standard Toshiba CD player is inserted in select Bay. Once removed, it will be put into hibernation. Certainly this isn't something you should do every time?
  Any ideas?

  I think that you are the first person who says something like that. Is the STRANGE empty when you try to use standby or Hibernation mode?

  In any case, it's really strange question. Certainly, something like that shouldn't happen. Have you noticed that since the first day? How long do you use your Tecra? Is there a similar situation when you use FN + F4 or FN + F3 keycombination?

• Tecra 8100 does not work after upgrading RAM

  Hello
  I bought a kingston KTT-SO815/256 pc100 144 pin, did a 2.50.on of my Tecra 8100 BIOS update
  It still does not.
  In my BIOS total ram is ok, so the computer knows that it is in the slot B, but when I try to boot the computer to a blue screen appears necessary a bios update. (Already done) APCI is not good.
  Someone has an idea?
  Now there is in the slot A - 64 MB
  Tried to put 256 MB in the B slot
  them, that nothing worked changed

  Hello

  Well, the blue screen error message usually appears because of the failure of the software matter or material. In case you I guess, apparently because of the new RAM.

  The fact is that you can upgrade the memory to the maximum. 512 MB.
  These modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  I recommend that you check you modules and try to use another compatible.

• 46SL733 HDMI not working only not with laptops

  Hi, I have 2 laptops and 1 HTPC home (Windows 8 and Windows 10). When I try to connect one of them to my Toshiba TV I can not get the HDMI signal, I get a blue screen with the message "no signal". I can get to work with the other TVs. My decoder satellite and android tablet also works with my Toshiba TV. I did the factory upgrade setting firmware and done many times. Is that all I can do to get my Toshiba TV work with my laptop/HTTPC computer.

  Thanks for help.

  Posted by exoz
  

  Hi, I have 2 laptops and 1 HTPC home (Windows 8 and Windows 10). When I try to connect one of them to my Toshiba TV I can not get the HDMI signal, I get a blue screen with the message "no signal". I can get to work with the other TVs. My decoder satellite and android tablet also works with my Toshiba TV. I did the factory upgrade setting firmware and done many times. Is that all I can do to get my Toshiba TV work with my laptop/HTTPC computer.

  Thanks for help.

  We couldn't get a picture of my friends PS3. I agree with the previous posters, this is the worst tech purchase I did for years. No support, not a single valid reason why this is happening. No wonder they're going in the hole, I hope they go bankrupt.

• Satellite L850/046 HDMI not working not

  I have the laptop above 8 win with a plug vga on a monitor.
  Recently, I bought an HDMI cable to a spare with dvi - d 18 pin port monitor.
  He worked for a week then suddenly just now connected HDMI monitor cleared port.

  I tried to use the display function to turn it back to the but no luck.
  Only the VGA connected monitor works and the laptop monitor is also disabled.

  They only way I can get the laptop monitor to work is to disconnect the HDMI port.
  Some how connect this port is now interfering with the monitor to the laptop to function.
  I tried to restart the laptop but having the same problem.

  I saw on another forum where the moderator suggested using this link to reinstall the driver, Toshiba
  http://support.Toshiba.com/drivers

  I tried to use the serial number and model number, but it does not either.

  Someone has an idea?

  Kind regards

  James

  Your PSKG8A-046001was Toshiba Satellite L850/046 released in Australia and you must use the Toshiba Australia support page to get the drivers.
  http://www.MyToshiba.com.au/support/download

  But I put t know which driver you want to reinstall or update?
  There is no particular HDMI driver. The HDMI port is recognized automatically by the system.

  But of course, it might be possible that your graphics card drivers are muddled up: Intel and AMD
  So uninstall the ATI GPU driver first.

  The laptop uses the Intel Core i5 3210M CPU processor and this graphic unit supports internal Intel HD 4000 CPU.
  I recommend you update the Intel HD Graphics 4000 driver and the ATI/AMD driver.

  By the way: the latest version of the Intel HD Graphics driver 4000 can be downloaded from Intel page too.

• Pavilion dv7-6b56nr: input HDMI not working not

  My laptop old 4 year was quite slow and unresponsive at times so I am here yesterday & downloaded some updates driver including audio and video. It runs a lot faster now, but today I have connected my laptop to my TV that I made hundreds of times through hdmi connection and it does not work. That's happened?

  * I also can't adjust the brightness more. He's stuck on super bright.

  Hi @miltaryman,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-6b56nr Entertainment Notebook and the HDMI doesn't work does not correctly. Here is a link that can help troubleshoot the HDMI connection.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!
  
  Please let me know how it goes.
  
  Thank you.

• HDMI not working on Satellite L750

  Hello.

  Will be happy if someone can help with this problem.

  I have connected my Satellite L750, PSK2YA - 04K 010 with Windows 7 sp1 (64-bit) to my TV today using a new HDMI cable. It worked fine for awhile, then the display on the TV were cut. I still managed to get the display on the laptop to work.

  I used Fn + F5 to see if I can wrong it come back to life, but it did not work. After a long struggle, I just couldn't get the TV to work again with HDMI.

  I checked to see if I have all the latest drivers and all seem OK. I reinstalled the video drivers nVidia and then tested again. Same thing happened. It works for a while and then died on me once again.

  I noticed that I have a BIOS version 1.5, but cannot find a site where it lists the last update of the BIOS.

  Any help will be greatly appreciated.

  See you soon

  Huh

  Hello huh

  It is not easy to understand what the problem may be, but try to please use another port HDMI on your TV if there are few of them. Use, for example, 2 HDMI, turn on your TV and then use the combination of keys FN + F5 again.

  When you press FN + F5 are always several options listed there?
  You can be on TV again?

• Output HDMI not working not not on my Satellite L500

  The HDMI output on my Satellite L500 seems to have stopped working in the past months.
  I tried different cables, but it still does not.

  Any ideas?

  When you press the FN + F5 key combination while the laptop is not connected with an HDMI cable, you will see an option (LCD) only. When you connect a HDMI cable you will see additional options like LCD, LCD + HDMI HDMI and so on?

  Also, make sure that the correct port HDMI on your TV is turned on.

  By the way: what operating system do you use?

• X 1 carbon 20A 7 HDMI not working not

  HDMI port doesn't work just hard for the video. The MiniDP port works fine. I tried to launch the Lenovo system update and don't have not seen any problems, then updated the Intel graphics driver but the problem persists. The computer can see monitor, but cannot send video clips to it. Checked the issue with a HP22xw monitor and a big screen TV. Thoughts?

  Had the same problem myself. Lenovo had to replace a board inside the laptop.

  Suggest you give supports a call or email.