46SL733 HDMI not working only not with laptops

Similar Questions

• Alienware M17x R4 HDMI-IN works only on Windows 8.1

  Hi, I have a R4 M17x and tried to use my Xbox 360 with HDMI-IN but it works only for a second then goes black but the sound still works.

  I Googled it and the only thing I could find is that apparently it doesn't properly earn 8.1?

  Any other R4 M17x owners had this problem and I hope know a fix?

  Data sheet:

  I7-3720

  GTX 675M

  3D 120 Hz display

  For anyone else having the same problem, I tried the 352.86 driver and managed to do work for most, what you are to put the lid nothing when closed and switch to HDMI-IN, it shows for 1 second then goes black, then close and open the lid and it will appear and work. :-)

• Shared WEP not working only not with the new Inspiron laptop

  Hello

  I just bought an Inspiron laptop a few days ago. I have problems to set up my wireless network. When I change my open router for WEP connection works fine on my laptop, but when it is about shared WEP an error message saying that it was unable to connect. The thing is that I have other wireless devices on my network that only work with WEP shared. Is there anyway that I can get my laptop to support this connection? I have an Inspiron laptop with equipped with a Wireless N card.

  
  

• Family safety does not work on a new laptop with windows 8 preinstalled

  Hello, I previously used Family Safety (FS) on my daughters netbook and it worked very well. I took my cell phone account that she does not have an account on. So for Christmas we he bought a new laptop (win8) of full size. I created myself as the admin, and him as a standard user with a different username than its netbook, and I configured FS for the new account on the new laptop. Well, I am not sure if more FS works on the netbook, but I am sure that it does not work on the new laptop to 100%. I tried over and over reconfiguring, sometimes it won't save even my applications updated. It simply doesn't get it. The only thing I can think is that, in the implementation of his account, it doesn't have an e-mail address, and I was forced to create a local account. Could it done than the FS functionality?

  Hi, I had family security to work by removing the local account that I wanted to monitor and adjust it upward with a hotmail instead of just local account. Family safety has started working immediately and exactly as expected. I always think that theres a problem when people are trying to implement local accounts. Thank you for trying to help me in any case, if I need help in the future I will contact you guys once again.

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• Function of ' play to ' Media Player works only not with the music on external drive

  Hi, I have not been able to "play to" music files stored on my Seagate external drive to a receiver AV Pioneer... "Play"works very well with the stored music files on my drive c of the laptop. Music on my external hard drive will appear in my library. Have laptop Windows 7 with Media Player... any help appreciated... .thanks

  Hello

  Do you have any application installed on the computer security?

  Method 1:

  If you do, I suggest you to disable anti-virus and check if it solved the problem.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the step is not enough, then you can go to the method 2:

  Method 2:

  I suggest you go through the steps and check.

  a. closed Windows Media Player12.

  b. Access Services [table-> system and security-> administration-> Services tools]

  c. find the service named "Windows Media Player Network Sharing Service"

  d. stop the Service manually.

  e. Locate the "UpnP device host"service. Stop the service and restart it.

  f. run "Windows Media Player Network Sharing Service" now.

  g. close windows all associated and the Panel. Open Windows Media Player, right click on a playlist and see if the Play option lists the TV. Try to play now.

  Hope this helps and keep us posted.

• "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  "Error while interacting with the scanner: the selected scanner was not found." Called brother and my MFC 7360N works very well with other programs to scan - only problem with Adobe Acrobat Pro 11.

  Hi davidd67669685,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after going through "help > check updates.

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  You can check after connecting this scanner locally to the system if asked its connected on network & then look for the same thing.

  Please refer to this article:- of the troubleshooting tips for scanning questions when using Acrobat

  If the problem persists ask please check with another user account.

  Kind regards

  Christian

• Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? Every month I pay an amount for PS and LR...

  After the upgrade to Windows 10 Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? I bought the license more than 1 year ago. Every month I pay an amount for PS and LR, and for the past 4 months I can't work. Russian support team cannot solve this problem and sent me here.

  Thank you! I reset my password, the problem was in it.

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo