Tecra R850 starts when you open the lid

Similar Questions

• Satellite L850-150 starts when you open the lid

  Hello!

  I have upgraded to Windows 8 and PC (L850-150) now lights up when you open the lid.
  Is it possible that only the button turns on and off?

  For you, this document should be useful:
  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  A short feedback is greatly appreciated.

• Satellite U840W-10 t starts when you open the lid

  Hello world.

  I recently bought a U840w-10 t.

  I can solve a problem.
  When I stopped completely win8, I enabled in the BIOS and in the configuration of toshiba software the option this computer do not START with the opening of the SCREEN.

  But even with this option turned off, my laptop STILL BOOT to WINDOWS, simply open up the laptop, NOT by pressing the power button.

  I want to avoid that, because I noticed that when the laptop is on the bag, sometimes it STARTS by itself with a small vibration and milimetter opening of the screen.

  Does anyone have this problem?
  Toshiba is announced on this subject?

  Thanks in advance.

  Have a look here:
  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  + There are two possibilities. A stop of the hybrid were made in Windows 8 (default option) or "Open Panel - Power On" is activated. +

  + If one of these two functions is activated, the notebook starts up automatically when you open the cover of the display. To change it, disable hybrid closing mode or turn off the function "open Panel - Power On. +

• Satellite A100-049 - how can you stop it turn on when you open the lid?

  I don't see any option to stop this in the BIOS or otherwise but it annoyingly turns on when you open the lid. I stopped it turn off when you close the lid, but prefer that he remained turned off when you open the lid.

  Any ideas?

  Hello

  I assume you are using the Vista operating system.
  Have you checked the Power Options OS located in the control panel? Do it!

  But a question; Why you use n t stop him if you n t want to turn on the laptop by opening the cover.

• Satellite A200-27U not wakes up after hibernation when you open the lid

  I just bought a new Satellite A200 27U which goes a lot so far.
  However, I have configured in hibernation mode when I close the lid.

  I can't resume automatically hibernate when I open the lid.
  I have to press the power button.
  Is this normal, should resume automatically?

  If yes how to do it do?

  It is the same with my Satellite P200 and I think it's normal. It is the same on my second laptop preinstalled WXP.
  Putting into service is not automatically and after you open the laptop I have to press power button / stop too.
  But it is not so problematic. What do you think?

  You use Windows XP Home or Vista edition?

• Tecra A8 PTA83E, when you open the splash screen

  Hello, I'm me Tecra A8 and when the screen is closed and I open it (computer is not turned off) I get a black screen and he finds "starting windows" and low on the screen, he finds "press F8 to start advanced and looking bad."

  What's wrong?

  I recently clean the computer with the cd and I recently got a service and they change fan and dvd player. I wrote about this problem too, but now it's back.

  Anyone who has this too?

  /Anki

  Hello Anki

  To be honest, it is not easy to understand what is the problem there. You can try to update BIOS in the hope that the problem will be solved.

  I recommend to check the settings of standby power and test it by changing the settings for when I close the lid option. Test also with profiles of different powers.

  Sorry Anki, but it is really not easy to say what the problem is here.

• Yoga 2 Pro - keyboard is not activated when you open the lid of the screen after sleep

  My Yoga 2 Pro has very often problems to activate the keyboard when I open the screen.

  That's what I do:

  -work with Yoga 2 Pro

  -Close all applications and after that, I close the screen

  -After some time (maybe a few minutes or several hours) I open the screen

  -It will take a few seconds until the screen is turned on (which is expected)

  -at least 50%, the rest keyboard disabled. The backlight cannot be activated and the laptop does not notice any key. I'm unable to log :-(

  -J' I need to close the screen, it takes a few seconds - and when I open the screen for the second time, the keyboard is enabled - not always, but usually. But sometimes the keypad remains disabled, although I try the procedure several times. If that happens, I need to restart the machine.

  All the drivers are up to date.

  @Lenovo: Please indicate how to solve this problem! It's very annoying open-close-open-close-open-... the display up to what the keyboard is finally activated!

  Kind regards

  Oliver

  http://download.Lenovo.com/Consumer/mobiles/transit136w81.exe
  Transition of Lenovo 2.0 for Windows (32-bit, 64-bit) 8.1 - Lenovo Yoga 2 Pro

• Equium A100 - screen turns off when I open the lid completely

  I recently had a problem with my Equium A100, as when I open the lid fully, the screen turns off.

  However, when the half open, the screen is completely visible.

  I have attempted to open the screen and can not see loose cables to my knowledge.

  Any help on how to solve the problem would be appreciated.

  I agree with Akuma. It sounds like a hardware problem and probably the contact loses when you open the lid.
  The cable screen should be checked and probably replaced.

• CS5 - Action starts automatically when you open the program

  I have CS5 and it was working properly until recently, now when you open the program first, it starts automatically perform an action, then I have to stop the action and continue with what I was doing.  Does anyone have an idea how to stop this action without deleting?  Thank you.

  I guess you've planned somehow a script to run at startup. I have no more CS5, but in more recent versions of Photoshop, you can find Scripts under file and would go to the Scripts event Manager dialog box. You can see that I set this up to run the sticker to the startup action. To stop running just uncheck the events allow to run box. It's probably a little bit different in CS5, but you can probably get by on your own now.

  Terri

  

• My Qosmio X 870 always starts once I open the lid

  My Toshiba Qosmio X 870 still turn on automatically once I open the lid, _even though I have disabled this feature in the system of Toshiba settings_.

  What can I do to open the lid of my laptop without causing turn on automatically?

  Hello

  Did you also follow the statement as described here:?

  + * Why my laptop Windows 8 start automatically when you open the cover of the display? * +
  http://APS2.toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm

• How to turn off the wake-up upward after hibernation when I open the lid?

  I've set up the power button to hibernate your laptop.

  After pressing the button and wait some time to complete the process of hibernation, I close the lid.
  But when I opened the lid to examine, for example, battery charge indicator, laptop wakes up.

  Very annoying. How to disable?

  Why boring. I presume that you n t open the cover for nothing jut so you want to work with your laptop.

  If you see options for standby power, you will see that the option says: when I press the power button. When I open the cover, there is no option called.

  Sorry, but I think that there is nothing to do.

  By the way: in another topic ask you on the eve of power feature. Have you found a solution?

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• How do I place my computer to power on when I open the lid

  I want my computer to turn on when I open the cover, how do I set this up

  Hello and welcome to Microsoft Answers.

  Most laptops are already built to wake up from sleep, if you open the lid, but there is a bit of a plug: it depends on the depth of a computer's sleep is in.  If the computer is shutdown completely and totally turned off the power, open the lid will not (usually) turn it on.  This would be the manufacturer which built computer (they will have to build a hardware device which detects the opening and then triggers the power).  Why WIndows can't he do?  Well, Windows is not running, so the manufacturer will have to incorporate the functionality of the physical case itself.
  Windows peut wake the computer when he sees the open lid if the computer is simply sleep, because (without getting too technical here), even in "standby mode" there are still a few 'consciousness' to the rest of the system (Windows is, in some form of tiny, still active).
  I'm sorry if this isn't meet your direct desire to turn on, but perhaps it sheds light on why this is the case.
  PS. for what it's worth, I use only mode "Eve".  Unless there is an update requiring a full reboot, my laptop never actually gets "shut down."  Sleep in Windows 7 is very efficient and reliable, and I would recommend giving it a try.

• When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  Reset preferences, reset the default workspace, and purge the cache.

  Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purge the cache can solve problems of the thumbnail display.

  • Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  • Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene