Evertime I stop the M10 Pro Satellite goes into hibernation

Similar Questions

• When the computer goes into hibernation, it uninstall the device drivers for my HP printer.

  When you wake up you can't print anything until it reinstalls the drivers.  Sometimes, it is not automatic, that it will install the printer and drivers so I have to turn off the printer and turn it back on so it can recognize it.  It does not uninstall the printer and the driver when it is turned off and turned back on just at the moment where it goes into hibernation mode.

  Hi SFinOK,

  The best way to solve this problem is to obtain the latest Windows Vista service pack. If there is a reason why you are unable to install the latest Windows Vista service pack, the best thing is to get the fix that is mentioned in Microsoft KB 929734article.

  See the link below for more information:

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  http://support.Microsoft.com/kb/929734

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  What would happen if the computer goes into hibernation mode, but there is no free space on hard drive?

  No doubt a failure to the hibernation or a nasty system crash - not sure and not willing to risk a stable system there.  :-)

• Why my computer constantly goes into hibernation?

  Hi all ~

  Recently, I noticed that my computer goes into hibernation by itself when not used for a period of time. I confirmed that my power settings dictate this behavior so that plugged in or on battery power.
  Instances that I noticed this, mainly, in mode "sleep" overnight and although slow, act as a "wireless card" for my personal router.
  When this happens, it is not hot or lack of power, he is simply there. I can't find a scheduled task so it hibernates, or an action to be left in standby mode or has been inactive for a while.
  I am really confused and would like if someone could provide an answer, or make me on the right track at least!
  Please help, because it becomes very annoying.
  Thank you
  -Crip.
  Summary and things to know:
  My computer into hibernation by itself, is not a scheduled task so it hibernates, it is not any form of action in my settings to be able to dictate the hibernation, it hibernates generally with more than 90% of battery remaining power and is never hot when it enters this mode.
  My computer is a portable set of bridge NOT running Microsoft Windows 7 Home Premium OS.

  Hello Richter,

  We are here to help.

  For hibernation make unavailable, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the search results list, right-click guest, and then click run as administrator.
  3. When you are prompted by user account control, click continue.
  4. At the command prompt, type "powercfg.exe /Hibernate", and then press ENTER.
  5. Type exit and press ENTER to close the command prompt window.

  Let us know how it goes.

• Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer

  When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.

  I've updated the BIOS and it is not fixed.

  Hello

  Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
  Have you tested the laptop with the factory and preinstalled Toshiba system parameters?

• Touchpad stop going into hibernation mode. transfer of the apps

  Hey all, I just got my Touchpad a week ago and I used to power press and hold the power button and he'd jump a menu to stop the machine, but that stopped working? Now when I hold the power button, it will just in hibernation mode. I have to go into settings, info on the device, etc. to shut it down. I was wondering if anyone else has had this problem? I think the Exchange I have 14 days, but I then buy all the apps I bought? Not a happy camper right now...

  Make a post on this forum

  http://forums.Palm.com/

• Run the script automatically when Windows goes into hibernation or wakes up?

  Hello

  I use the group policy feature in Windows XP to run scripts automatically when you open a session or logoff.

  But it is also possible to make a script run automatically, whenever a Windows-xp machine is about to Hibernate? And also when it wakes up from hibernation?

  The clues how to proceed?

  A funny hibernation is that if you put into hibernation and power then upwards and don't 'do' nothing - like press a key or move the mouse (just to sit and watch), in 300 seconds (5 minutes), XP will go back into Hibernation automatically.  Try it!

  XP does because after it comes out of Hibernation, if XP detects that there is nothing to 'do', he thinks he might be from Hibernation by accident and goes back to "sleep" and said "why you wake me up?

  That's why when people hibernate during the night and their machine turn on the morning he wakes up, they make their coffee or breakfast and return later to see that they have the power of their machine again.  If they think something is wrong, but things are working as expected.

  One way to fix this, is to use a third-party tool that uses the command line to simulate a mouse movement.   It is enough to prevent the rehibernating while you are on XP.

  To simulate a movement of the mouse as soon as your system is equipped with Hibernation, you will need to download the nircmd.exe file.

  There are many other utilities of vouchers on NirSoft main page:
  http://www.NirSoft.NET/

  To simulate the movement of the mouse, download the file nircmd.exe here

  http://www.NirSoft.NET/utils/nircmd2.html

  Put the nircmd.exe file in a folder which is somewhere in your path (c:\windows\system32, etc.) or consult the path in your command file. I put the nircmd.exe file in my c:\tools folder where I keep other things.

  If you do not have Hibernate enabled in your Power Options, tab hibernation, it will put your system on Stand-By instead of Hibernation.

  Create a batch file (I called mine hibernate.bat and put the nircmd.exe in my c:\tools folder) and put this line in your hibernate.bat file:

  off @echo
  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate
  c:\tools\nircmd.exe 10 10 movecursor
  movecursor-10 c:\tools\nircmd.exe - 10

  Save the new file hibernate.bat on your desktop or somewhere, you can retain and double-click it to run the batch file.  When you are sure that it works very well, and then drag the new desktop icon to your quick launch area (to the right of the button start), change the icon, rename, etc, so it looks a bit better and then you can click on new quick launch when icon to call the file hibernate.bat.  Now just remember to use the hibernate.bat file (which could be on your desktop with a nice icon) instead of the menu to turn off the computer.

  The first command will put the system into hibernation, and then when XP comes from hibernation (even days later), run the following commands in the batch file.  These last two commands will simulate a slight mouse movement and who will deceive XP into thinking there is a reason to get out of hibernation and it will not go back to sleep.  Then when you come back from your coffee, your system is always waiting for you.

  If your case, your hibernate.bat might look something like:

  off @echo
  order 1 run before hibernation
  2 run before hibernation command
  order 3 to run before hibernation

  Powrprof.dll, SetSuspendState c:\WINDOWS\system32\rundll32.exe Hibernate

  order 4 to run when coming out of hibernation
  command 5 to run when coming out of hibernation
  order 6 to run when coming out of hibernation

• Then the computer file transfer goes into sleep mode

  Original title: stop windows sleep/hibernation

  I need to transfer files from my PC to laptop. However when idle and waiting transfer via network lan my laptop will be slowed down and complete the connection. How can I stop this? Running Windows 7

  Hello

  
  Perform the steps to disable sleep and hibernation below and check if the problem persists.
  
  a: start Power Options of Type in the search box and click on enter.
  b: Now click on change plan next to Balanced (recommended) settings.
  c: now click on change advanced power settings.
  d: Now, Expand sleep option and then under sleep after and Hibernate after, set this parameters Never
  e: then click on apply.
   
  Also check out the following link
   
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions 
  
  Hope that helps.

• Blue screen when the system goes into hibernation with BCCode: 9f

  Every time when my laptop back into hibernation mode, it gives me option to start in safe mode or start windows normally. When the computer starts, it gives the error message. :

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 9f

  BCP1: 0000000000000003

  BCP2: FFFFFA800B39F050

  BCP3: FFFFF80000B9C3D8

  BCP4: FFFFFA800F83AAB0

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\082313-10998-01.dmp

  C:\Users\ilyasm\AppData\Local\Temp\WER-108108-0.SysData.XML

  Based on a similar thread, I tried to apply the KB975599 patch, but get the following message if poster "this update is not applicable to your system".

  I downloaded the minidump in skydrive at the following link.

  https://SkyDrive.live.com/#CID=F6050197253DE2F2&ID=F6050197253DE2F2%21119

  I use a Lenovo T420s laptop.

  IM

  All of these related usbehci.sys Microsoft USB 2.0 Enhanced Host controller driver Miniport takes too long to respond.

  What USB devices have connected you?

  Here are some suggestions for fixing USB
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Problem with laptop goes into hibernation in Vista mode

  Hi, I need help... my laptop goes into hubernation mode and I can't wake up he brightens... I already have whent command promt and do a scan (sfc/scannow) and I find my got error file and it worked (file: CBS) I have no idea what to do to fix! I need help if anyone can help please tell me...

  Laptop goes black... something! I don't know what is...

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• My Satellite goes into battery mode despite being connected to the power adapter

  Y at - there anyone out there who can help me, please!

  I bought a Satellite a couple of years ago which worked well for a while - however, it has started to overheat a lot and kept stop without reason. After many searches on the net, I discovered that the fans were very likely blocked with dust? After you clean the laptop worked like a dream and as a Bunny happy I was!

  However, now a new problem has been its ugly reappearance - for some weird reason the laptop suddenly, without warning, past in dominant mode of battery despite being connected to the power adapter? He refuses to "acknowledge" that the adapter is plugged drains the battery quickly and then stops?

  I tried once more looking for an answer and it seems that I am not alone in suffering from this problem? I read that it is perhaps a bad connection between the adapter and the motherboard, but it would be expensive to fix? Others have said to try a new adapter, but I tried from another laptop and it still happens? I hesitate to implement local repair because sometimes, this problem may occur after half an hour and other times, that won't happen for hours and hours and it is difficult to explain the problem?

  There seems to be no rhyme or reason, but to crazy me on a regular basis!

  HI Deb,

  It is a common problem and can have several causes. The most common are a common defective soldering on the motherboard (where the socket is attached) and it can also be caused by a bad connection between the AC plug (at the end of the cable) and the socket on the laptop.

  Unfortunately, the standard response from most repairers is just to replace the motherboard, probably because it's faster for them and produced more revenue that comes to fix the connection.

  I solved this problem on my SA30 by pinching the cable ca to the back of my laptop in order to prevent any movement or tension on the connector. Unfortunately this will not help if the socket is already damaged, but it can reduce the incidence of the problem to occur.

  Kind regards

• Any Creative cloud application starts and the macbook pro fans going crazy

  Hi, I'm updating cloud creative apps every time Adobe updates.

  Recently, I discovered that my macbook pro fans are going super fast with the latest updates of any application (Photoshop, Illustrator, In Design and the latest app for Creative Cloud etc.).

  Yesterday I was working on Illustrator and fans were running hot, the app said this use of memory, it was almost complete and the UI of Illustrator went to alignment mode.

  Closing the app and restarting, the problem disappeared.

  But every day, whenever I open an application CC, the fans become noisely and they go very fast.

  I appreciate any kind of help.

  AdobeCare contacted via twitter, after Adobe customer via chat.

  The two has uninstalled me & reinstalled, start in safe mode, start from a different account.

  But no solutions to this problem.

  By myself, investigation on the activity monitor, I discovered that the problem was engine CEPHtml.

  Google search on these words... This resolved: CEPHtmlEngine slows down the computer (Mac) and the solution

  That's everyone having the same problem.

  Adobe, please fix soon.

• the computer keeps going into hibernation... How can I get the monitor turns on and stop reading "monitor is asleep."

  The monitor lights. It reads monitor is asleep. Sometimes if I'm patient enough for the computer to turn on and off the screen lights up and indicates that the computer has been hard to get out of hibernation. How can I disable hibernation?

  Hello melissacrowley,

  1. you have the latest drivers installed for the graphics card on your computer?

  I suggest that you update the drivers for the graphics card and check if you have the same problem. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• Cannot update Vista SP1, the computer restarts and goes into repair mode.

  Im trying to install SP1 on a laptop with Vista installed. Everything is fine and the installation complete the part 2 or 3, then restarts. After that, I'll get the progress bar of vista for a few moments, then the screen goes black for a bit and then the computer restarts. If I restore to before SP1 has been installed on the computer is fine. I've run the preparation tool before installing SP update and that did not help either. Last know well is no help either. Any ideas?

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Important: How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/
  Support for Windows Vista without service Pack installed will end on April 13, 2010. To continue to receive updates for Windows security, make sure that you are running Windows Vista with Service Pack 2 (SP2). TaurArian [MVP] 2005-2010 - Update Services