Tecra S1: Step by step how to reformat HARD drive by using the product recovery CD

Similar Questions

• Satellite L755 - how to return to Windows 7 using the HDD Recovery folder

  Hello
  are how you today

  I own a toshiba Satellite L755.
  I have recently upgraded to windows 7 to windows 8, and now I do not have windows 8. I want to go back to windows 7.

  Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB.

  What I need is to know if its possible and if you can you explain to me how its done.

  I searched the Web for an answer for tha last 4 hours and I thank you

  > Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB

  A lot of people said you can use HARD drive recovery in order to put the system back to factory settings.
  This true s but this is possible ONLY if the system has not been modified.

  In case you have changed the system, you could go back to the factory settings using the recovery disk!
  Recovery disk may be created using the preinstalled tool called Toshiba Recovery Media Creator.

  Have you created this disc in the past!

• Lost my copy of Vista how do a new drive, I have the product key

  Hi I have lost my copy of Vista home premium and hard drive passed to the West, and I don't have the disk that I lost I have the key to produce what can do thank you very much. M F

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  "How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals"

  See you soon.

  Mick Murphy - Microsoft partner

• How to reformat Satellite L645-S9412D using the recovery media creator?

  This is my first laptop and I do not know. I already burn disc of recovery media creator, but I don't know how to use it. Could someone teach me how to? Thank you. And yet something, do I have to re - install the operating system when I used the recovery disk?

  Thank you for your help... :)

  With recovery disk, you can install recovery image and game for laptop to factory settings. Please note: when you do this backup data will be deleted so before that, you back up all your important data.

  When you want to use the recovery disk to do on this way:
  Start your laptop and press F12 to get into the boot menu
  When the start menu is shown on the screen, place the recovery in the optical disc drive disk
  Choose the CD/DVD in the menu and press the ENTER key
  Just follow the menu on the screen.

  Do it, test it. Check alone, how it works.

• How to reformat hard disk and write the hard drive C, of zeros

  I gatewayway 500 x with windows xp home ditiond... This is a manufactured office 05/28/02. I have all the restore disks. How to write c or a hard drive, of zeros to make clean reinstall? It must be real simple, but people at the door give me a hard time. All the computer Gateway manufactured after OCT 2008 have a numnber SIND. Mine does not work. I did once in the year 2003, I phone to life as long as I am the original owner. I also have a Gateway VISTA laptop. I met two compuers myself. I use the desktop computer and error, learning and music. I studied logic computing to CSUN Northridge, CA in 1999, I was a student. I love this kind of thing, but I can't afford to pay losts of money at the time.  I'm disabled because I had two failed back operations less than 18 years. Now Iam 65, sea musician tought and I want to become a tech free tought. Help, please. I never learned to type properly... I have a lot of free time amd, I'm ready to help others. CC to BILL GATES.

  SHALOM BARRY

  Just use one of the managers of two partitions described below to remove the existing Windows XP partition (or will write zeros, but this is not necessary just to reinstall XP)

  -Partition management-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• How to display ONLY the photos on my hard drive and remove the duplicates it.

  I bought Photo Sweeper but have heard warnings of ' reference fileis and the risk of the original photo, sitting on the hard drive.  .  Is there a way to see ONLY photos on the hard drive and use Photo Sweeper here?

  Background: on my HP PC for years, I've created folders for each Member of our family.  Thus, a paper copy of each group photo were regularly filed in each issue of people pictured in it.  Migration to iPhoto and iMac five years ago, all copies of the same photo were transferred on my Mac.  More recently, I've migrated my iPhotos library of Photos.  I would like to clarify these multiple copies to a hard copy, but I feel of the complications and risks. In particular, the integrity of all the projects I did (for example attach a photo to the album, a book or a slide show) could be compromised if I happen to remove the copy special paper which refers to this picture (the correct term?).

  It seems to me that, if I could see the actual photos on the hard drive and use the double Finder here, I could get the job done.  I could combine that info (faces, keywords, descriptions) that I added on a large number of copies and sign him for a single copy and then to eliminate duplicates. Would this work?   Back to a project, I could see a photo with a warning icon, a yellow triangle with an exclamation point inside, which indicates the hard drive file to which he referred is now defunct.  I could (I guess I could, but how!) change things to make this photo point to rest a copy on the hard disk, couldn't I?

  Tips appreciated.  The notice are maybe just don't not to alter my photo library, but it says that I have almost 30 000 photos. I know this isn't so.   Thank you.

  Your question is not clear

  What Version of the operating system and Photos you have? You have a referenced library or a managed library? What specific "warnings" topic referenced b = files you are?

  Please explain what you have and what is your concern

  LN

• Equium A200-1V0 - how to use the Toshiba Recovery CD product?

  I used the reinstall xp on desktop before but do not need to do a reinstall on your laptop (toshiba) with vista with their product recovery disc. With vista, I had to find my own drivers etc. after the OS is installed on a clean drive.

  I want to clean the disc by using a product of drive wipe as Dariks boot and nuke (used on office/xp computers some time and as a very clean before you reinstall drive) on my laptop Toshiba Equium A200-1V0 before inserting the product recovery cd.

  Questions-
  (1) is it ok to erase drive with DBAN - this usually effect the ability of the recovery CD to do its job?
  (2) how can I use the product recovery cd or it is free it is exposed just charge, boot from the cd and follow the instructions online?
  (3) it will return the laptop to the factory shipping status (i.e. don't have no need to look for the drivers, etc.)?

  Thank you very much for your help - just need to be reassured that have not is it a wipe and reinstall on your laptop and vista with a "recovery disc" (always a disc not specify that it is a full copy of the operating system

  James

  Hello James

  The recovery procedure everything is very simple and here are the answers to your questions:

  # You should not do. Before installing recovery starts the disk HARD integer will be automatically formatted, created new partitions and OS will be installed on the first
  # Start Notepad and press F12 repeatedly to enter the boot menu. When the menu is displayed a recovery media in the optical disc drive. In the menu choose the CD/DVD drive and press ENTER. Follow the meny on the screen. After that two or three click OK installation will be implemented.
  # Yes

  When the installation is complete just start computer laptop again and wait until the operating system will be prepared for the first start. It is not necessary to install any additional software.

• How can I reinstall the CS5 after reformatting hard drive?

  I'm teaching for CS5 and Photoshop Lightroom since 2011 license. They are only installed in a computer that needs to have completely reformatted hard drive. What are the steps needed to ensure that resettlement work?

  Thank you

  Soledadcv please see http://forums.adobe.com/message/5418120#5418120 where the oldest download section titles of software Adobe is discussed.

• Step by step single run through a sequence TestStand using the API

  Anyone know if it is possible to break a sequence of execution and then simple step during various stages of a sequence using the API TestStand?

  Pause and resume running no problem, but step by step once execution is broken turns out to be illusory.

  Largely received ideas

  Steve

  The object of performance communicates methods for this.

  Norbert

• How to restore my Equium A110 to the factory setting by using the product CD?

  Hello

  My laptop crashed and it was basically the problem hard drive according to my understanding.

  I bought a new identical hard drive on the laptop and when I run the product recovery CD, it starts and then on the choice of the language, he says there is no language selection and connect in some BACK...

  I don't know how to restore my laptop using the default product recovery CD. Can someone be kind enough to walk me through step by step or point me in the right direction if there is already a thread on this forum.

  Thank you all for the cooperation.

  Rob

  Hello

  Laptops are specific products of countries recovery image on a single language. You cannot choose a different languages.

  Start the installation of recovery, don t change simply follow the menu on the screen and try to start the recovery image installation.

• How to assign different drive letter in the new hard drive?

  My hard drive for OS window is broken, which is the C: drive, so I buy a new HARD drive, but my original D: drive become a C: drive and new HARD drive is assigned with drive E:, I can't restore my Ghost in new HARD drive image, because the image is restored in the C: drive only.

  Anyone have any suggestions on how to assign different drive letter under cmd?

  Thanks in advance for your suggestions

  Hi oem7110,

  Follow the steps in the article.

  How to change drive letter assignments in Windows XP

  How automatically assign a drive letter by using the Diskpart.exe command on a Windows Server 2003-based computer or on a Windows XP-based computer

• How can I reinstall windows 8 using my product key?

  Original title: Reinstalling windows 8

  How can I reinstall windows 8 using my product key?

  How to reinstall Windows 8

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

• How can satellite M50 - what is on the disk recovery - I run

  Hi, people, I have a Satellite M50 and a recovery disk, which is on the recovery disk? Y at - it windows Xp on it? Y at - it all the tools and utilities on it?, can I use it to reformat? How can I run?

  Thanks if you can answer

  On the Toshiba Recovery CD, you will find a picture of Toshiba!
  The image contains a Windows operating system, Toshiba drivers, tools, utilities, and additional programs like WinDVD, for example.
  Using the Toshiba Recovery CD is the easiest way to install the OS on the laptop and set the notebook to factory settings

  As said above the recovery CD will format the whole HARD drive. It would also be possible to erase the partitions! So be careful!

  If you want to install the operating system or run the recovery CD, you put it in the drive and the start of the player. The pressing the C button allows you to start from the CD/DVD drive

• Beginner help on reformat hard drive laptop

  Hi I'm new to this forum and I never reformat hard drive before > _ <

  

  I have not driver OS from the seller, but I have genuine windows7 so my question is how to reformat my hard drive without a driver OS?

  Of course I want to reformat my hard drive with my windows 7 and sorry for my bad grammar because English is not my first language > _ <

  Help me please

  Hello

  You have a set of recovery DVDs, you should be able to start the reinstallation of the operating system by inserting Disc1 into the CD/DVD drive (close a window that can be opened when you do this), then by restarting the laptop to boot from the disc.  As long as the process progresses, you will be asked to insert Disc2 and then later, Disc3.

  Kind regards

  DP - K

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.