Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

Similar Questions

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• Satellite 1900-203 - update the radeon driver?

  Hey,.
  I would like to know where to receive updates driver for ATI Mobility Radeon M6 pilot coz of updates my laptop crashes when I try to play games...

  Hi Jamila,

  You don't say what operating system you use, but the Toshiba Europe website lists the following for XP: -.

  FTP - URL display-xp - 7869.zip

  Date last modified 30/01/04
  ATI company
  Type display driver
  Subtype (none)
  Size (KB) 17052
  Version 7.86.9
  Universal language
  Countries world wide
  Description if you get a blue screen on your laptop while playing games, this driver may fix this problem.
  Model Satellite 1900 203, 1900-803 Satellite, Satellite 1900-603, Satellite 1900-303, 1900-503 Satellite, Satellite 1900 305
  Windows XP operating system

  Please check which driver you currently installed and then check the Web from Toshiba website for your operating system.

  I would not recommend downloading from another source display drivers, since these may not have been tested on your laptop model.

  Good luck

• Can't boot from USB/dvd drive on Satellite Pro M10

  Hello

  the broken internal dvd drive, an external USB disk is used. Now I need to reinstall windows on a new hard drive. How can I boot from the external hard drive? (I don't have a floppy drive, but I can't find the right drivers)

  Thank you

  Luke

  Hello

  Don t you need all the drivers for this key USB — because the USB disk is a device integrated on your computer. This means that whenever you connect the diskette drive to your machine, the computer establishes that diskette as a cable internal disk and this is the reason why you won´t need all the drivers.

  It s already installed when you plug it in.

  See you soon

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• I have windows XP on three partitions, in disk management, I deleted a partition and now I can't boot into the partion, I want to keep.

  I have windows XP on three partitions, especially because I tried to repair my not be able to start. It all started when disk management I deleted a partition, I thought was unnecessary. now, I can't start the partion, I want to keep. Black startup screen says something about disk management cannot find the hard disk of material, something like that. I can start in one of the other partitions, but I want to get back the deleted partition. Windows XP, AMD 64 dual. Help, please.

  Hello Seymour777,

  There is good and bad news for this.

  The good news is that there is a way to do it.

  The bad news is usually the disc at the level of the publishing industry.

  This operation is not in this forum.

  Your best option right now is to look for a data recovery specialist or watch data recovery programs that will do the job for you.

  Best regards

  Matthew_Ha

• No BIOS for USB support? Can't boot from USB HDD

  Hello

  I was trying to install two operating systems (Linux, Windows Vista CTP) on my external hard drive (USB 2.0, Firewire). And I can't seem to-because he doesn't seem to be a way to specify the support of USB devices in your boot sequence. It seems that the configuration of the BIOS is limited to these 5 icons of basic (no text below the same you know what they represent) - that seem to hold to drive HARD, CD/DVD, network, etc., but none of the USB hard drives (I don't think the FDD account)?

  For example, install Windows Vista complains that the BIOS does not support boot from my external hard drive - Linux does.

  Or am I missing something...?

  Kind regards

  Krish-

  Hello

  You n writing t nothing on you laptop but as far as I know it of not possible to boot from the external USB HDD.
  You can start the USB FDD, HDD, Lan or ODD but not the USB HDD internal.

• 5660 envy: Envy 5660, OfficeJet 8710 and 8720: they can print documents from a thumb drive USB connected?

  ENVY 5660 e-all-in-one printer can print documents (for example, .doc files) from a USB connected to its USB port?

  Similarly, can the Pro OfficeJet 8710 or 8720 print documents from a USB connected to its USB port?

  Thank you

  DaleBr

  Hi DaleBr,

  Any printer PCL3 as the Officejet Pro 8710, 8720 support only Photos of pritning from a USB (JPEG and BMP), it cannot print the document files such as ir PDF DOCX to a thumbdriver, but only to a computer...

  The HP Envy 5660 only support printing Photos from a device memory too, but only from SD card, there are not any USB port for a USB.

  None of the models above can only print from a computer or a mobile device...

  8730 Officejet Pro which is a postscript printer to print PDF, Word and Powerepoint support files directly from a USB (Latin characters), however it is a commercial product and cost more as such:

  http://store.HP.com/us/en/PDP/HP-OfficeJet-Pro-8730-e-all-in-one-printer

  Kind regards

  Shlomi

• Satellite 1900-603: formatting the HARD drive without losing data

  Hello!

  I have a laptop of Pentecost 2 partitions in one, I have the OS and in others, I have my data, my problem is I want to format the partition with the operating system without losing my data, I intend to use for formatting recovery CD. Is this possible at all?

  Another question, I bought my laptop on the Switzerland but I am Portuguese is it possible to get an in Portuguese of toshiba recovery cd?

  Thank you

  Hi Rita

  It is of course possible.
  I assume that you installed your operating system on the first partition and all important files are placed on the second partition.
  The recovery procedure contains the standard and expert recovery mode recovery mode.
  You must choose expert mode. Here it should be possible to choose the partition where the OS image must be installed.

• Hi, I changed my router today and now I can't print

  any help appreciated

  Hello

  Thank you

  First of all, you need to remove or reset the old setting on your printer by following the steps mentioned below.

  Steps to reset:

  On the front of the printer, go to network Menu > default network > Yes.

  Once you have reset the network settings on the follow-up to the printer steps mentioned below to connect your printer to your wireless router

  1. go in the control panel of the unit NETWORK > select the Wireless Menu > Select wireless configuration wizard

  2. Select your network and enter the necessary information which will be asked to enter and you will get connected to your home network.

  3. Once connected, you must add a new printer using the software on your computer.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.

  * Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your issue.*

• 2010 requires loading sp3 and now I can only boot into safe mode

  Toshiba Satellite A105

  XP

  Intel Centrino

  PC Doctor with antivirus (McAfee has tried to load but I deleted it)

  I bought 2010 for 3 PCs, downloadable, at the Canada (I'm in AZ)

  I loaded all the upgrades of MS for XP except for Explorer 8

  Hello AnthonyHorn,

  This thread has been created in the Windows Update forum; Microsoft moderation team has moved this thread to the system repair and recovery Forum.

• I can't boot from HARD drive or CD/DVD - drive Satellite C

  I want to recover my laptop & I need to boot from the CD-ROM.
  I pressed F12 first time & boot from the cd, but I discovered that I put another cd just when I rebooted (rightly) I couldn't boot from the cd or hard drive.

  When I connect to the hard drive in the bios was detected but not available in the boot priority menu. Just the network card was there & now I can't boot from smoker hard drive cd/dvd. BIOS version is 1.30

  PLEASE HELP ME

  > When I connect bios hard drive has been detected but not available in the boot priority menu. Just the network card was there & now I can't boot from smoker hard drive cd/dvd.

  This means that the HARD drive or CD/DVD drive appears in the BIOS boot option?
  Strange, what model of laptop do you have?
  Have you tried default BIOS?
  Otherwise this (press F9 and save the changes to the BIOS)

• PCMCIA USB2.0 can operate in Satellite 1900-303?

  Hi, I have a toshiba satellite 1900 303 without usb2.0 ports, and I tested 6 pcmcia to USB 2.0 card 5 different manufacturers (investment, iconnex, sunix, conceptronic and a belkin powered) and the pc without exception hangs until I remove the card from the slot. Sometimes when I go into an external hard disk or a USB key, both directly connected to the card. However, I was able to transfer all the photos from my digital camera (30) to the computer laptop.

  I wanted that someone said if he managed to make the use of a pcmcia card to USB 2.0 in this model or similar and how, or otherwise shared his experience to not waste any more time with this, with things like format the pc or other. I am not a computer expert, but I think that there is no real certainty on this issue, let's hope I'm wrong.

  Thanks for looking

  I have Adaptec AUA-1422 cards in my Satellite 1805-S204. It works very well. It has firewire and USB 2.0. I understand that adaptec uses the NEC chipset.

• Satellite 1900-303 turns off for no apparent reason

  I got my Satellite 1900 303 for about 2 years and no problem. In the last month, I had a problem with him turn off his car suddenly and for no apparent reason. I checked virus and have found no virus. Can anyone suggest why I did this. I was wondering is that he has been making overheated?

  Thank you

  Hello

  Believe me, there is always a reason why this happens. From your description, I assume that your unit is overheating. If the temperature is too high the unit simply stops.

  You need to clean the device. After that cleaning the unit should work properly again.