Tecra S2 - Lan Controller is disabled after the installation of FritzCard PCMCIA
My laptop is a Tecra S2.
Once a FritzCard PCMCIA v2.0 is plugged in, the Lan controller is disabled.
Not until the PCMCIA FritzCard is removed and the S2 is restarted, the LAN controller can be re-enabled.
The LAN controller is identified by the Device Manager as a "Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller". I tried the latest drivers for the AVM FritzCard, both with regard to the Marvell Yukon. (original 1. Toshiba LAN Driver of the recover CD, 2. the last driver from Toshiba support download page and a driver, offered by the Marvell website).
All combinations are originally the problem mentioned above
Need a solution!
Concerning
Ronald
Hi Ronald
I have no much experience with FritzCard, but one of my friends told me that if someone uses this card, it is very important to install the supplied software before the card can be used. I'm sure he must have some manuals how to install the card properly.
The other thing is that the two devices use the same resources (IRQ).
Tags: Toshiba
Similar Questions
-
Windows 8 OEM samsung original is disabled after the installation of windows updates.
I have the original windows 8(Samsung Laptop) confirmed by Samsung as the original windows. Have this laptop for about 2 years now and have reset my windows again. But this time after the installation of windows updates, my windows are disabled and the watermark comes and it is said to activate windows. Samsung said support windows is authentic and check with Microsoft. But Microsoft has no support for 24 hours and support is not live at this time. Can someone help me with this problem. Please, I beg you. And I tried to put the key in the firmware to activate, but nothing helped. And the OEM key is invalid for activation at all.and add I activated my windows by phone before the update using the technique of slui 4... and after it started to update. And now reactivate cant using this key method.and calling OEM is not valid anywhere.
Hello
Please contact Microsoft Community.We regret sincerely all the inconvenience caused to you.I suggest you try the phone activation this time and see if it helps.a. at the start screen, drag from the right side, or hover your mouse on the top right of the screen to display the menu of charms.b. tap or click the charm of parameters.c. press or click on change PC settings.d. If your PC is not activated, computer settings provide instructions that are customized to your activation error. If telephone support can provide assistance for your mistake, tap or click the appropriate link, which may resemble one of the following conditions:> Activate> Activate by phone
I suggest you refer to the following article for more information.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
Kind regards
Anusha -
Cisco AnyConnect disabled after the installation of update KB3092627
After the execution of automatic updates on 03/10/15, AnyConnect would not start and was not in my system tray. I uninstalled the update (KB3092627) and the returned icon and am now able to use Cisco AnyConnect. Anyone know if there is a specific problem here and I need the update?
Hello
Thanks for posting your query in Microsoft Community.
Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forums.
-
Windows Defender is disabled after the installation of Security Essentials
I have win 7 64 .i install windos security essintial my difinder windows is provided with windos preinstalled on my computer when I try to run windows difinder it shows
a massege which it off
Hello emadelagamy,
Microsoft Security Essentials uses its own copy of Windows defender so it stops one supplied with Windows 7. Your system is currently still rather protected but by MSE.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
After the installation of Office 2003, Word hangs on a Tecra A3
Hello
On my Toshiba Tecra A3 (1.86 GHz Pentium, 1 GB RAM) I had until yesterday Office 2000 it emits the ideal way.
Now, I installed Office 2003 and I am unable to work with Word.The program hangs on each file that contains a single piece of simple photo or clip art. I can't believe it. A re-setup of Word did not help. Now, I installed again in parallel Word 2000 and it works flawless.
THX if someone can give an opinion
Antonio Giarrusso
Hello
You must perform a new installation of Office 2003.
First remove all files and the former software office 2000 registry keys and then perform a new installation.
After the installation of Microsoft Office 2003 Download all patches and updates on the Microsoft site.
The use of the CCleaner is very useful, because this tool checks the programs and the entries in the registry for certain shortcomings -
Computers on the local network does not show up after the installation of macOS Sierra
Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?
Thank you!
p.s. I can not even 'go' to the IP address of these computers.
Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.
-
Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card
I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed. I did it on other HP computers I've owned without problem.
Thank you for any help you can give me.
LarryC4
Hello:
See if your BIOS has an embedded audio location.
If so, it can automatically able to off when you installed the add-in on the sound card.
Check the options you have for setting the audio embedded.
If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.
The sound should then work on both devices.
And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.
-
Windows 7 does not start after the installation of updates - sounds familiar!
Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.
Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.
Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.
Here's the resolution...
I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.
My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.
Now my system is up to date with all windows updates and I'm able to restart without any problems!
Close this message.
-
Original title: xp does not start after the installation of avira
I have a HP Slimline s7410
XP Home Edition SP3
I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
I have a cd/dvd drive of work.
I don't have an XP bootable installation CDMy system worked well until: I installed the free version of Avira
Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.Here's what my BSOD looks like:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)Any help is greatly appreciated! :)
My first suggestion is to do a system restore at this time point.
second suggestion is to keep your external drive connected to the pc at all times. only detach when necessary. of course, it would be better to install a second hard drive in the computer instead. in any case, keep your personal files out of the system disk is a wise thing to do. You can also download and store files for free on the Microsoft Skydrive site.
third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month. Basically, you can open the Explorer and right-click on the drive letter. then select Properties, and on the Tools tab, you will have the opportunity to run the disk check. then reboot and do a Defrag. where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.
Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.
so my suggestion is to do a series of tests using your cd bootable your computer works. see if you can actually run a chkdsk/r at the moment with them. If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them. in any case, see if your boot at the moment media can run a check disk at all, and let me know.
fifth proposal is to install "microsoft security essentials" like your anti virus program. even if you have run ubantu, it is not likely to have been an infected copy. anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations. the people who make the virus deliberately their engineer for the windows operating system. If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too. Although they no doubt, attacks are more frequent for the windows os.
-
After the installation of the OC windows 7 audio driver cannot be installed
My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound
[Moved from comments]
Hi Dr.Kamuzora,
There is no Windows 7 drivers for your model. You can see the following link for more details:
http://support.Toshiba.com/support/modelHome?FREETEXT=556028
Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.
Refer to the procedure below:
a. press Windows key + R, type devmgmt.msc, press on ENTRY.
b. in Manager devices, go to the audio, video controller and game, expand it.
c. right-click on its index map, click on uninstall and click Ok.
d. restart the computer.
If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.
Refer to this link: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-WindowsIf the problem persists, I suggest you contact Toshiba support:
http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot
Hope the above information is helpful.
-
After the installation of Sierra, Web sites started to follow me like crazy! This has not happened before. Why this is happening and what can I do to stop it?
What are your privacy settings in Safari preferences.
-
When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?
Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?
-
can not start after the installation of 10 Windows via bootcamp OSX
Hello, I need help.
I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!
all solutions? I do not have a backup of my files under OSX, I lose my files?
NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.
UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?
-
Can't stop after the installation of El Capitan?
Can't stop my Mac 2013 after the installation of El Capitan
Hello
Use the power button (must hold until the Mac turns off)
Restart key CMD + ALT + P + R at the same time until you have heard of at least two start Bongs
How to reset the NVRAM on your Mac - Apple Support
Then, restart normally to see that stop / restart work.
21:11 Wednesday. May 25, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
Problem starting after the installation of the NTI Echo Satellite P50-B-11V
Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).
Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).Anyone facing this problem? Please advice if you have the time.
I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.Thanks fo your time.
Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).Anyone facing this problem? Please advice if you have the time.
I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.Thanks fo your time.
Dear marianbur,
New laptop having same problem here, is now stuck... Have you received still no solution?
Greetz
Maybe you are looking for
-
I received an email with songs that I didn't not buy what is a phishing e-mail?
Just curious to know if it would be a phishing e-mail. Said that I bought 3 songs the amount is in pounds and I am in the States. So I thought that it is one of these just phishing emails try to dispute the charges to get my personal info with me. I
-
Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update
Hello My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updat
-
How to clear a duplication?
I use a MacBook Pro OS X Retina El Capitan and I accidentally copied 'documents' on my desk and I put it in 'my files' so I have all my (many) duplicate photos in "my files". How can erase just replicas? Thank you Ory92140
-
Get the array of unknown size of the CVI code module
I'm creating a type custom for my client, and I've encountered a problem that I'm not sure how to solve. Here's the situation: We have a custom step in which the main code is executed within a step after step. The code acquires samples of an instrume
-
How to determine the maximum temperature in a row of 2 minutes?
I make the following request: (1) temperature signal reads in all the 1 second, set in a while loop; (2) I want to assure you that in a consecutive 2 minute, the temperature value is always less than a value, say 10 degree C; (3) if she can meet the