Temporarily prevent clusterware node failover for quick maintenance.

Similar Questions

• loop of two producers for quick DAQmx and the user controls?

  Hello

  Sorry if my question is maybe a bit too general (I don't have a VI implementation yet).

  I think about the solutions for a Structure of producer-consumer with event loop in the part of the producer.

  So far, if I had to do a project with DAQ, data analysis, data recording and enter the user controls, I've followed usually this kind of approach:

  I used the producer part to capture interactions with the user, and I also had a state machine in the part of the producer, with registry change. I also buy (any faster then 10ms) DAQmx device data in the part of the timeout of the structure of the event in the loop of the producer. I have several consumer loops down, such as data analysis, data recording, etc... I send the data measured in a cluster with the enumerations of the State of the loop from producer to consumer with queue loop.

  I'm not happy with my approach for the following reasons:

  1,

  If I need device acqure faster DAQmx data that the operating system clock can handle (like 1 MHz), so I can't put it in the part of time out of the structure of the event of the producer loop, because here I can go through the while loop with minimum 1 ms.

  2,

  If I put this part DAQ in a loop for quick consumption, it is not admissible for orders from the QUEUE line after that it starts to run (assuming that I use the standard structure of producer-consumer, so consumer loop every time iterates once, when a package comes from the Dequeue).

  Then say, how can I control a young (timed by DAQmx device internal clock) loop of data acquisition of the structure of the producer of the event loop? As loop DAQ to start, stop, restart, etc...

  Thank you very much for the advice!

  You can certainly have several loops of producer.  Have a User Interface, loop driven events to send commands and a separate data acquisition loop to send data are not a problem.  Each loop has a separate queue. (You might be able to make it work with a single, but using two queues avoids many problems).  Often, I used a system of three loops long before that everyone was talking about calling it a producer/consumer.

  Lynn

• Microsoft activation error activation server is not available to Microsoft's Activation Server is currently offline for regular maintenance or upgrade, or she may have technical difficulties now activating the Microsoft Reader

  Original title: Reader Activation - down for Mainentance... for weeks?

  When I try to activate my Microsoft Reader on Windows Mobile 6.5 (on a Samsung Omnia ii) or Windows 7 Home 32 bit, I got the message: Activation activation error Server Microsoft is not available to Microsoft's Activation Server is currently offline for regular maintenance or upgrade, or she may have technical difficulties now. Please try to activate later. At first I waited patiently the mainenance remaining or the technical problem to be solved... but I now have the message every time I tried to turn on the last two weeks. The server is really low? How the world do we get support on MS Reader? There has been a lot of complaints about the support for this product. Normally, I was able to get my camera Windows Mobile works, but lately nothing works. The Windows Mobile device appears somewhat spoil the activitation and demanded each month reactivation couple... but now I can not get anything to activate and it seems to be a server problem, not a PC or device issue. If someone has never penetrated the MS ranks to find someone who really knows what happens, please advise kindly. Thank you Joel at Bellevue

  Interestingly, I tried to activate MS Reader on my HD2 tonight in preperation to give to my girlfriend (I'm getting a feeling tomorrow, she has several seldomly but I hope she'll get into the Kindle as the HD2 duel boots into Android).

  My laptop is running W7 Pro with IE9, I'm a domain administrator.

  Race through the activation that I generated an error 500 on the server each time.

  With IE9 "Run As" administrator, it works.

  I hope this helps.

• Impossible to download World of Warcraft, receive the error message "DEP (Data Execution Prevention) should be enabled for this program.

  original title: need help, DEP is upward :(

  Here's the deal, im trying to download World of Warcraft. DEP (Data Execution Prevention) don't. When im trying to change it and add it to the list "settings for DEP" it won't let add me. DEP (Data Execution Prevention) should be enabled for this program. You can not disable DEP (Data Execution Prevention) for this program. -so here's the question, what can I do to fix this? I rebooted my pc as an hour ago, b4, I did I actually got the game installed. Is there a way for me to squeeze the game spent DEP (Data Execution Prevention)? Please help me with this. Thank you. -Mikkel.

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an addon or another program causing the problem and you
  must verify that 1.

  What antivirus/antispyware/security products do you have on the machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
  may cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If a doubt
  program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and
  run - not all are bad but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs (Vista)
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and which would be
  stands with Prevx running except for a cookie of occasional low level (not a big deal), the update
  and then execute it as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  Data execution prevention Internet Explorer Windows 7 included - several difficulty methods here
  http://HubPages.com/hub/data-execution-prevention-Internet-Explorer

  Feature Data Execution Prevention, or DEP in Windows Vista & Windows 7 - see also the links to the
  at the bottom of this page.
  http://www.WinVistaClub.com/F33.html

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program of Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista (and Windows 7)
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Options - Advanced Options - Internet Security Section - clear the check box enable memory
  Protection to mitigate the attacks online - APPLY - OK close and restart IE

  I hope this helps.

• pin the Favorites on the bar tasks or to make a button for quick access to Favorites how can I do this?

  pin the Favorites on the bar tasks or to make a button for quick access to Favorites how can I do this?

  Open Favorites
  CTRL + I keyboard
  It is the windows key......... CTRL + I... Press all 3 at the same time...

• customize the icon for quick access in hearing 2014

  Audition 3 I had a quick access icon in the toolbar so I could create a silence anywhere in the track. In hearing cc 2014 I Don t know how to do it and I´d as an icon for quick access to save the changes I do. Is there a video tutorial on these issues?

  Thank you

  I'm afraid that the shortcut toolbar did not in the current version; Audition 3 was the last version to have it, as such.

• How can I do this?  I got this message: interested in our offer of extra storage by train? Contact customer service to register for quick access.  2.1GB/2.0GB

  I'm just sent in circles after I click on the link.  I need more storage, no more applications.

  Storage

  Interested in our offer of extra storage by train? Contact Customer Service to register for quick access.

  2.1GB/2.0GB

  Here is information on how to contact support: FAQ: how to contact Adobe for support?

• How to filter data for quick selection of 'All choice' dashboard?

  Hello gurus,

  I have obligation where I need to create buckets based on the codes to work.

  for example Job code in('1',''2','3') = 'ABC '.

  Labour code in ('4 ', '5','6 ') = 'XYZ '.

  The labour code now has LOVs 1 to 10 and we use all the codes work to create buckets.
  I use instruction box in the formula of the column to create buckets in command prompt and remove null as additional values in the selection options.

  now the problem occurs when I gave the options "All options" user for quick selection, which returns all the codes work.
  Is there a way to restrict "All options" to render only 'ABC' + 'XYZ '.

  Srini Hey,.

  I got it by twisting a lil bit.

  good answer I guess

  (' @{JOB_CODE} "="ABC"AND"Job"". "") Job"("1"))

  OR

  (' @{JOB_CODE} "="XYZ"AND"Job"". "") Job' ('2'))

  OR (' @{JOB_CODE} "=" AND "Task" ".) (The task' in ('1 ', ' 2'))

  Mark Helpful if you feel...

  Thanks a lot for your help.

• a new datastore iSCSI (disk/lun) appears in the inventory. Warehouses of data, but not availble for quick vMotioning...

  Hello

  We have added the new datastore iSCSI (disk/lun)

  This new data store appears in the inventory. Warehouses of data, but not availble for quick vMotioning or the creation of a new virtual machine.

  did we miss a step?

  Ty

  r

  The reason is that the data store is not presented to all hosts in a cluster. When you create the VM in vCenter Server, only warehouses of data visible to the host on which the virtual machine is created are displayed.

  Make sure the presentation on your storage system is correct and rescan your hosts.

  To check the above, take a look at the Configuration-> Storage for guests.

  André

• Can disable us the option of smoothing for quick selection tool?

  Can disable us the option of smoothing for quick selection tool?

  I can deselect with the magic wand, but not with the quick selection. Any ideas?

  Thank you

  Dominik

  I don't think you can, but in the dialog box refine edge, you can use the contrast setting to get rid of most of the anti-aliasing.

  MTSTUNER

• Create a business for a maintenance object object

  Hello
  
  I want to create a business for a maintenance object object change all XML attributes to XML elements.
  Should I have to change the whole XML schema attributes to the elements one by one?
  
  For example, I create the business CM_Person_BO for the purpose of maintenance person object and use the business object to add a user in a more standard way.
  But it is a very important job to rewrite the entire schema for the maintenance person object, which has the rest of the elements that are PersonIdentifiers, PersonNames, PersonPhones, PersonCharacteristics, person and SeasAddress.
  
  Is there an easy way to do it?
  
  Thank you
  Kerr

  Should I have to change the whole XML schema attributes to the elements one by one?
  Is there an easy way to do it?

  Unfortunately no, you need to set the schema with each element/field, once. The main objective is to create a version of the BO with only the required fields or a subset of available fields, should you not all fields in a month. This improves performance because the IO is made only for the fields specified in the BO.

  You can define areas of separate data for the context of the purpose of each person, i.e. identifiers, names, phones, etc. and include (includeDA) in the Soundtrack of the person (CM_Person_BO) for clarity.

• Failover for a distributed cache configuration

  Hello
  
  For the configuration of our production, we will have 4 app servers a clone by each application server. so there are 4 clones to a cluster. And we will have virtual machines Java 2 for our distributed cache - being a failover, these two will be in the group.
  
  How do I configure failover for the cache distributed?
  
  Thank you

  user644269 wrote:
  Right - for each plans closely defined cache would need to have the card high-units back where it could take on 100% of the value data.

  More precisely, the near-scheme/back-scheme/distributed-scheme/backing-map-scheme/local-scheme/high-units value (take a look at the [Configuration of Cache items | http://coherence.oracle.com/display/COH34UG/Cache+Configuration+Elements]).

  There are two options:

  (1) no expiration - in this case you would have to the size that active storage JVMs that a single JVM could store all the data.
  or
  (2) expiration - in this case you would define high a units value you choose. If you want to store all the data, then it must be set higher than the total number of objects that you will store in the cache at any given time or you can set it lower with the understanding that once top-units is achieved consistency will expel some data of the cluster (i.e. Remove "memory of cluster").

  user644269 wrote:
  Share have no requirements to avoid that these JAVA virtual machine are a failover in the case where only goes down.

  OK, data fault tolerance is enabled by default (set to a level of redundancy).

  : Rob:
  Team coherence

• P2714T, touchscreen does not account for quick taps

  SN: NC - 03 K 257 - 74445-37 t-008P, bought November 20, 2014 (yesterday)

  Rev. NUM. A00

  Computer - desktop (motherboard ASUS M5A78L-M, processor AMD FX-6200)

  OS: Windows 8.1

  Radeon HD 7700

  Monitor is attached via HDMI + USB(for touch)

  The cable came with monitor

  resolution 1920 * 1080, 60 Hz

  The problem is that the touch screen does not account the first quick tap after having been untouched for about 6 seconds. Which often prevents me from calling the menu Windows charms, but also simply ignorant of taps. If I do a prolonged click (approximately 1/4 of a second), the touch is recognized. Other faucets are satisfactorily than if I let the touchscreen only for more than 6 seconds.

  I tried to download the software FRO support page of the monitor, in the hope it will be updated to firmware or otherwise resolve the issue, but it did not help. I also ran the diagnosis integrated with no problem (looks like it only tests the display, but not touch)

  I did a quick test by placing the oscilloscope probe close to the touchscreen. I have observed that, after 6 seconds of rest, continuous pulse train transformed into bursts of pulses. This transition seems to coincide with the onset of the problem.

  Is it possible to solve the problem... It's pretty boring.

  We could not replicate this problem on several P2714T. Contact Support technique Dell for your country to make an exchange of the configuration screen.

• How to prevent the automatic upgrade for Windows 10

  Press reports say that Microsoft will 'soon' 10 Windows upgrade recommended for Windows 7, leading to the automatic download and installation.  I don't want that.  I have upgraded to Windows 10, then returned to 7 (leaving an extra 100 GB of something on my hard drive).  I intend to hold out until the last minute, and perhaps later.

  So, how to prevent this scheduled automatic upgrade?  Do I have to turn off updates in Windows 7 and manually review every update?  What I read who cannot help because Microsoft does not offer as much detail about the upgrades as in the past.

  Computers were a hobby for me in 1980.  After 35 years the computers are now a tool and their maintenance is a chore.  I'll learn Windows 10 when I need to and not before.  I really don't want to use 10 at home and at work 7.  When my employer upgraded, so I will.

  Hello DilbertFan,

  For the first year that Windows 10 is out, he will be free to users with a license for Windows 7 or 8.1.

  If you don't know that you do not want to update then please copy the text following that I have which is in italics below and paste it into Notepad.

  The Publisher of the registry Windows Version 5.00[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Gwx]"DisableGwx"=dword:00000001

  Once you have that then go ahead and save it to your desktop and save it under "block 10" or something like that. ""

  Return to your desktop and locate this file and change the extension from .txt to .reg file

  Save it, and then double-click the file. It is to modify the registry to block the upgrade of Windows 10. I use a lot.

  Thank you

• How to prevent auto sorting (alphabetically) for TreeField

  Hi guys:

  I did a string in the array, which is in the order I want, but when I add to a TreeField (for example. ( myTree.addChildNode ((,)), it shows in alphabetical order on my Simulator screen, anyone know how to prevent this automatic sorting?

  The first node that you add to your tree is displayed in the last...