Terminal is locked do not allow me to enter my password.

Similar Questions

• Windows do not allow me to enter my password. specifically will not work some of the keys on the keyboard for the password.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  As a wild guess, maybe you have a laptop and have helped with your NumLocks?  This would cause the j, k, l, u, i, o and p keys do not act normally.  If this is the case, try to hit the 'num lock' key once to disable it and see if you can now enter your password.

  HTH,
  JW

• HP dv7 envy will not allow me to enter the administrator password after factory reset

  I did a system restore on my hp dv7 desire, it has windows 8. Now when he goes to the login screen it says disabled system administrator & does not allow me to enter a password. How am I able to access a screen where it allows me to enter a new administrator password that I just bought this computer? I bought it used but still in the box with everything

  Hello

  Look in the box that was delivered with your PC being used and if the owner had created a Windows 8 password resets a USB flash drive or CD.

  If password reset media are not available, use external recovery support HP which should have been created on DVD or USB stick. You have the external HP recovery support?  Before using the HP recovery media, be sure to boot into the bios and disable secure boot and turn on legacy mode.

  If you don't have the external HP recovery media that her you should be able to start in the HP Recovery Manager and create the recovery media if it has not been previously created.

  If the tips above are not viable, then contact HP support and ordering a set of HP recovery disks.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  How to find the model number of HP and HP product number

• My computer does not allow me to reset my password

  Original title: "password".

  My computer does not allow me to reset my password, even with a password reset disk. He tells me that there is a problem with my assistant, who does not allow reset. This password is to my administrator account. I really need help with this so I can get on my work projects and finally finish with them. Please help me!

  If you have a Vista DVD disc or repair, open th following link:
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

  Otherwise, this forum has an explicit policy forbidding users to bypass or crack the password someone assistance.
  Here is the link to the police said:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Dear all,

  I tried to do a procedure that will search for a group of approval in our database that matches.

  (1) the number of levels

  (2) the number of users by each level

  (3) the id of users by level

  entered by the user.

  I tried various methods to receive user input dynamically at run time, but in vain.

  Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)

  Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Thanks in advance,

  Séverine Suresh

  HEY, Sebastian,

  3035408 wrote:

  Hello Sir,

  My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.

  Thank you

  Séverine Suresh

  There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input.  User interaction is a job for your front end, like Zlatko tool suggested in response to #5.  If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.

• my address bar does not allow me to enter information, how to access?

  before that I could go directly to the address bar. Now he has a magnifying glass at the beginning of the bar and does not allow me to type in it. What should I do to be able to search in the bar of monzilla?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!
  _______________________________________________________________________________

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I recently bought an iPod Touch 5th generation I factory reset the iPod and deleted all data. It does not allow me to enter the iPod, I do not have the original owner their Apple ID and password. But he forgot his password. What should I do?

  I just need help man.

  The original owner may change his password here: Apple - my Apple ID.

  These are the measures that must be taken to remove its ID to find my iPhone if it does not want to provide you with password:

  Turn off find my iPhone Activation Lock - Apple Support

  Good luck

  GB

• ADM 32 GB will not allow a unique SSID and password to be put in place

  Sir / Madam,.

  I got a new 32 GB ADM.  I have updated to Firmware 3.04.  I was able to reset the Admin password without problem.  However, the unit will not allow an SSID / unique password to create its own network.  I typed the info in the settings/edit page the Wi - Fi connection settings, with selected WPA security.  It will allow me to type the information in the data fields, and select done.  But then brings the following error message.

  "Error: failure Action was not successful."  Please try again later. »

  I also tried only to set a password, with WPA, using the name SSID default ('6B 23 SanDisk media").  It works no more.  I tried this in a few days.  The unit is fully charged.  He has no problem to connect with my home Wi - Fi network.

  In addition, on the page of my iPad device settings/Wi-Fi, 6 B 23 of SanDisk media is visible and connects without a problem.  But it says "Safety recommendation" under this network name.  I guess that's because there is no password set.

  I need for this unit to be sure until I'm able to use in public.  Any suggestions?

  Thank you

  Lee

  drlucky... OK, I called SanDisk and they understood the problem with me on the phone.  Wireless Media Drive passwords do NOT accept special characters or spaces.  Numbers and upper & lower case only.  Even for the SSID, except spaces are Ok for the SSID.  Hope this helps someone else who can read it.

• custody of Microsoft silverlight crashing my ebay so do not allow me to enter password etc, im on pc, vista os... any help?

  Can someone help me... only recently, for some unknown reason to me... microsoft silverlight came and stopped me enter my password on connection ebay... some highlights box cannot but totally freezes my page, cannot do a thing...

  Did not find a virus... my used avast set to day or difficulty, either uninstall, then now have avg free to help me, who must say do not have everything

  problems with about 8 years ive been using it...

  I just don't understand? any who can shed some light please... I'm not good at calculating, taught me that I am not sure, lol...

  much apprecaition in advance

  Hello

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what web browser do you use?
  2 is specific to a particular Web site or all Web sites?
  3. you receive an error code or message?
  4. have you made any recent hardware or exchange of software on your computer before the show?

  If you use Internet Explorer, then please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

  Tips for solving problems when Internet Explorer hangs or stops working:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Follow the steps in the link below.

  Can't access some Web sites in Internet Explorer:
  http://support.Microsoft.com/kb/967897

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Follow the steps in the link below.

  How to clean a facility damaged Silverlight and then reinstall Silverlight:

  http://support.Microsoft.com/kb/2608523

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Question of Smartphones Bluetooth blackBerry: Storm 2 does not allow me to enter a code at the time of the match.

  When the sale related to enter the password 1234 for my Garmin Nuvi, Blackberry keyboard goes dead.  It will not accept what I am trying to enter.

  Any idea?

  If you restart the device, the keyboard will still dead?

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

• Remote Desktop Windows 7 does not allow me to enter a field

  I have a win xp and a host of windows 7 PC, they are not on any field.

  I have a VPN access in the work.

  When I start remote desktop on the XP PC I find myself with a login screen to the remote computer where I can type in my work to logon, the password and the domain.

  On the (new) windows 7 PC, I don't get anything that will allow me to type in the field.

  I start with the credentials of my home PC and it has a "change user", but that gets me only to one PC House accounts.

  I looked in the options and tried a few things, but no joy. There is no gateway Office remotely. I'm in the VPN and can access things like proves it the XP box.

  I can start vmware and run an XP box on it and that gets me in, but it's so backward...

  What should I change in win7 or remote desktop to get this working?

  Thank you

  Martina

  Never mind.

  It's a bit stupid, but if I type in domain\logon as a login and password to work it actually works.

  sigh

  Martina

• Configuration for Laserjet 1102w HTML page does not allow me to enter NETWORK tab

  try to install Laserjet 1102W, but can not enter the NETWORK tab on the HTML th Configurator. Simply does nothing.

  Only part that meets in the Configurator is the left side panel for more INFORMATION. Help!

  It can also be useful (especially step 4) if you use Mac... http://support.HP.com/us-en/document/c02020336

  Good luck

  Lagunak

  I work for HP but my messages and responses are mine.

• Lightroom CC does not allow me to enter the new name of profile for export to ColorChecker

  I have the latest version of the Lightroom CC running on Windows 8.1.  I bought a passport from X - Rite ColorChecker (CH) today and installed the software that came with it.  With the help of my Nikon D7100, I took a gross picture of me holding the CH in my hand and then imported it (.) NEF file) in my LR library (selected the copy option in the import window).  Then, I went to the region to develop for the same imported photo.  Subsequently, I clicked on the file menu-> export-> ColorChecker Passport now to create a new profile.  The LR never gave me a chance to enter a profile name, in other words, it never displays the popup dialog window enter the name of the DNG profile.  However, it has created a new custom profile named 'profile '. I can see it on the camera Calibration tab.  I tried to redo the same process, and he said you want to substitute the present 'profile'.

  How can I get the popup dialog enter the name of the upcoming DNG profile?

  X Rite has not updated the Lightroom Plugin for 2011, and it seems that some users have problems with Windows 8, 8.1 and 10. The link below is what I proposed to a single user. The poster did not, so I don't know if it was ever resolved. It works very well on my system Windows 7 using LR 2015.1.1 is most likely a problem of Windows compatibility.

  Re: File - export with Preset question (Lightroom CC)

  Another thing you can try is to put the program file Passport.exe is running in compatibility mode of Windows 7.  Go to the location of folder below and make a right-click on the Passport.exe of the file, then select Properties. Go to the Compatibility tab and check "run this program in compatibility mode for and select"Windows 7"in the drop-down list box (see below)."

  C:\Users\NAME\AppData\Roaming\Adobe\Lightroom\Modules\XRiteColorCheckerPassport.lrplugin\w in

  

• I'm trying to fill a PDF form and in the phone section is not allowing me to enter more than 2 digits by field. Help!

  

  In this case go to tools - prepare the form, right-click the field and select Properties, then Options.

  Look if the boxes 'Limit characters X' or 'Comb of characters X' is selected. If Yes, select not them, and then click OK.

  Leave the form editing mode, and then try again.

• I am filling a form from a web site of veterans of the Kansas and the form does not allow me to enter the necessary information.

  Is there a program that I need to download the form?

  Hello larrylightfoot,

  ·         What type of form you received?

  ·         How did you receive this form?

  ·         What happens when you try to open the form?

  ·         What is the file extension or the form that you received?

  If the form needs no associated program to open it, then you will need to install the program to be able to open the form. For example, if the form you received is in PDF format you need Acrobat to open the form.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.